"Enable protected at Startup Mode" to stop printing on RightFax

Similar Questions

• [Acrobat DC] Cannot print unless that uncheck "Enabled Protected Mode at Startup"

  We maintain a Web site where users can download PDFs generated by this site.

  There are users of statement that PDF files can be downloaded but wouldn't print after that. There will be a message box popup to inform users that they are unable to print. Uncheck "enabled Protected Mode at startup" in the Acrobat preferences enabled them to print again. The same users also said they cannot leave this box checked because other programs in their systems requires this checkbox.

  Can someone tell me that what are the possible causes that to happen in some machines and what is the alternative that uncheck this box. Personally, I was not able to simulate this issue, but it has been reported by several of our users.

  Hi Howie

  Can you please try update Adobe Acrobat Reader DC to the most recent version in the machines and try again?

  To do this, simply open Acrobat Reader DC, go to 'Help'-> ' Check for Updates '.

  Let us know if the problem reoccurs after that.

  Thank you

  Serge pacome

• The mode protected at startup

  We configure adobe reader X for AD deployment and we have users who have problems with protected mode is enabled. I have added a registry key using adobe Customization Wizard X to disable 'Enable protected startup mode', but that doesn't seem to work.

  HKLM\Software\Policies\Adobe\Acrobat Reader\10.0\FeatureLockdown

  bProtectedMode DWORD set to 0 to disable Protected Mode.

  Or use the https://sourceforge.net/projects/customadmx/ group policy templates and handle this with Group Policy Editor.

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• MY PRINTER WON'T STOP PRINTING

  I have a brand new HP 309 a wireless printer.  I use it with a USB PORT.   I downloaded something from a PDF file and the printer won't stop printing.  I rebooted the computer, I unplugged the printer for an hour and when I turned it on it took I hit the Cancel button, the display shows "Printing cancelled", then it reads 'print now.'  When I try to use the printer to print something it reads "busy".  Help.

  Hello

  Unplug the USB cable and follow the steps below to restart the spooler service.

  Click Start (Windows logo) > > all programs > > Accessories > >

  Right-click on command prompt and open it as administrator (choose Run as administrator)

  Enter the below command in the black window and click on enter key...

  net stop spooler

  Who will stop the spooler service.

  Then enter the command below and hit enter key to start the spooler service

  net start spooler

  That will remove the current impression comment and things in the print queue.

  Press the Windows key and R on the key board to open the run window (click Start > > run).
  
  In the run window, type services.msc, and then click Ok.
  
  Which will open the services window.
  
  From there, double click on the print spooler service. Which opens a new window.
  
  Click the Stop button to stop, and then click Start to restart the spooler service.
  
  Make sure that the startup type is: automatic status and Service: started
  
  Click apply and then click Ok to close the services window.

• OfficeJet pro 8500 a: 8500 has will not stop printing

  immediately after setting up and installation of my 8500 it began printing a page with only the fraction 1/4 and a smiling face in the very top left of the page and that's all it prints, one after the other, again and again, and do not stop. If I have to cancel the printing of the touch screen, it stops the current print but restarts printing again shortly after.

  I sent a test page (page has shown in print queue), but I won't stop printing the page of fraction and smiley face.  the work queued print ever.

  There is no error before, after or during the printing of this page.

  Welcome to the HP community @gemini570,

  I understand your Officejet 8500 has constantly prints a page with a smiling face in the upper left corner, and I wanted to respond to try to help.

  Please, start by connecting your PC to the print and scan doctor and choose "print trouble." This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  You can also check to see if you have Web Services enabled on the front of the printer and try to turn it off to see if the pages stop printing on.

  If the above don't help, try to uninstall the printer software , restart the computer and run the HP printer install Windows Wizard to install the printer.

  Another idea that comes to mind, would be to try stop and start the print spooler:

  1. click on start
  2. type 'Services' in the search field.
  3. open SERVICES
  4. at the bottom, click "extended view.
  5. search for the print spooler
  6. right click and choose Properties
  7. Select Automatic from the drop-down list, close the window
  8. right-click Print Spooler and select 'Stop', wait until it stops and then again right click and 'Start '.
  9. close out Services and try your print.

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  Let me know the results!

• Lexmark x 5650 stop printing

  I; m running windows xp and my lexmark x 5650 stop printing

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you cannot print in lexmark x 5650. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2. what happens when you try to print?
  3. you receive an error message?

  Method 1:
  You can try the steps from the link and check if you are able to print.
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:
  You can disable the Antivirus installed on the computer software and check if you are able to print.

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  If you need further assistance, please answer and we will be happy to help you.

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.

• Last week my office pc willnot go in standby mode, it stops, and then in the am I get the message that stop you the bad way how to fix

  Last week my desktop pc will not go in standby mode, it stops then am I get the message that he was arrested by mistake.  How to fix

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1 : check the clean boot and see if the problem is solved or not.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: perform step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Method 2: Update the display driver and check if the problem is solved or not.

  Updated a hardware driver that is not working properly

  Hope that helps.

• HP Deskjet 845c stopped printing in the middle of a job and don't print any more

  My deskjet 845c was printing fine and then suddenly stopped printing in the middle of a page. The power light is on and steady, and the orange light blinks.  I can't print at all at the moment.

  I followed the troubleshooting listed using the HP diagnostic Print and have removed and cleaned the ink cartridges, but the orange light still flashes.

  Any help you could offer would be greatly appreciated.

  Thank you.

  It seems that one of your cartridges has failed.  I don't remember if the printer Deskjet 845c is printed in reserve with a deleted cartrdige mode.  If you then remove the cartrdige color and try to print a test page.  If this works the cartrdige of color was at fault.  Otherwise then reinsert the cartrdige color and remove the black cartrdige and print a test page.  It worked?  If so, the black cartrdige is at fault.

  If the printer will not print with a cartrdige deleted then I would replace the black cartridge with a replacement fee.  My experience suggests that the black cartrdige is usually the culprit...

• HP PHOTOSMART 6520e-all-in-one: Photosmart 6520 stopped printing.

  Printer was working fine, after that I updated the driver for Windows 10, then just stopped printing, error communicate is not with the printer, but the status of the printers is connectivity is ready, State of the network again on the computer it says ready until I hit print I get error. Print the printer status reporrt of the printer, but no computer or computers of the tour.

  Hi @hpvee

  Welcome to the Forums of HP's Support. I understand that you are experiencing what looks like network problems. I would like to help.

  First of all, try to launch the HP print and Scan Doctor. If the problem persists, try to go through the network troubleshooting steps in this document. Printers HP - printer keeps Wi-Fi connection.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• Satellite A660 - protection of HARD drive utility does not enable protection

  Hello

  I have a Toshiba Satellite A660 1F6, unfortunately the usefulness of Toshiba HDD protection does not enable protection because all the buttons are gray, and when I try to open it, a message appears: "He was not able to set up properly for the Service of HARD drive Protection System."

  I tried uninstalling and reinstalling, but the situation does not change.

  Thank you.

  Are you using the original operating system preinstalled that you got with your laptop?

• Photosmart C309 abruptly stopped, printing black ink (any solution?)

  My HP Photosmart Premium C309 suddenly stopped printing black.

  Everyone recognizes this problem and has a solution?

  I tried to unplug the power plug, power switch, cleaning of the printheads several times (manually), cartridge to give a little air, checked the connections, replacement of cartridge again. Nothing helps.

  Browse the internet: it seems that this problem occurs with the most HP printers.

  See for example: some forum someone temporarily solves the problem by performing cleaning operations for (more than) 7 times, which cost five new cartridges to replace, and after a month or if the problem recurs.

  I wouldn't do this because I don't want to empty an another XL cartridge and then discover the problem recurs.

  The printer (bought in April 2010) is connected through the USB port on a Mac Pro 8Core with OS - X 10.6 (I always use only paper HP and HP original cartridges)

  Thanks for your help in advance.

  Y.S.,

  This "Absolutely" worked for my c309! He started printing gray yesterday, then I finally got the blank pages. My first thought was that HP has screwed me again! lol but I tried the post above... I have unplugged the printer for more than 25 seconds, held down the 3 and # buttons simultaneously for another 25 dry more plugged in printer and now the buttons down then made for another 25 sec.  Had to reset the lang. and the country, but after a few minutes he printed a perfect test page and I was able to print all my docs now!  It was a solution easy vs on the removal of the water and heads/cartridge, etc.  I would try this first and if it doesn't work, then you can try other patches. Thank you!!!  Good luck!

  Erisso wrote:
  

  HP Photosmart Premium C309 didn't not print black

  You have this problem too, black wouldn't pring but would be printed dark gray?

  What I did and it worked has been reset to the factory settings, unpluging the printer during ± 25 seconds

  3 and # for and other 25 seconds went and after pitting power back on

  then re-registering your setting, all wet very well

  Jumps, this will help others

• want to 5660: 5660 hp won't stop printing

  How can I make the printer stop printing the same thing over and over again

  OK, let's try to manually delete the print queue.

  Follow the steps in step 1 in this doc HP.

• HP Officejet Pro 8610-e: HP Officejet Pro 8610-e will not stop printing

  I am trying to print on paper legal and necessary only 5 copies. After spewing of 17 full copies and 4 partial, I turned it off in the hope that it would stop.  Fortunately, when I turned it back there.  I'm not a computer guru, so a lot of the phraseology of the aid might as well be Greek to me.

  I've had my printer for about a week now and have not had this problem because it happened first, but I would like to know how do I cancel a print job, just in case it never happens again.   It is also interesting that this happened when I was printing on legal-size paper.  (Thank God, I don't have to do very often!)

  Thank you in advance for any advice you can offer.

  When a document is printing (or was sent and is about to print), there will be an indicator at the top of the screen, with an X white within a circle and print.  Touch and it displays a screen with a rex from X in the lower left corner.  Press X to stop printing.

  Note that if a print job is always sent from the computer, it can take a long time for the printer to be ready for the next job.  The printer stops printing immediately when you press the red X, but the computer can continue to send the rest of the job that will be discarded by the printer.