Enable the ports module network IPS without Defense Center

Similar Questions

• Satellite C660 - 15K - how to enable the wifi module?

  Laptop has no mechanical switch the WiFi module.
  What utility or driver must be installed to enable the WiFi module?

  Network adapter driver installed with no problem, in the properties of the computer module is active and active, but does not see available networks.

  Assistant to Toshiba at the same time said that the module is disabled...

  Help, please!

  > What utility or driver must be installed to enable the WiFi module?
  You must activate the Wlan using FN + F8 key combination.
  Have you tried that?

  If this does not work, then you must install the VAP (value added package) and utility support Flash Card that controls the keys FN.

• Can I change in the book module in LR without or invest new layouts?

  Hello

  can I change in the book module in LR without page layouts or invest the new?

  Behind her, I always look for the possibility of transforming the text. I would like to be able to read the text on the back of the book from the bottom to the top and no reverse, as shown.

  Thanks a lot for your help

  Just a stupid crazy thought - could work with limits.

  Use "Hard Cover / dust jacket" (images print on the cover with this option? Anyone know?)

  Rotate images 180degrees. (Text would need to be incorporated into the image)

  Remove and replace the cover "upside-down".

  

• How to enable the DVD library in WIndows 7 Media Center

  How do you enable DVD library in Win 7 Media Center?  I tried editing the registry as in Vista, but it does not work with Win 7.  I am running Win 7 Pro 64-bit version.  Thank you

  Hi zt75,

  Run you manually editing the registry?

  Have you clicked on fix it from the link below? If this is not the case, click on fixit and check if that helps.

  How can I enable the DVD library in Windows Media Center on a Windows Vista-based computer?
  http://support.Microsoft.com/kb/930526

  (Although this article is for Windows Vista, we can always give it a shot in Windows 7.)

  Or do these steps and check.

  To enable the DVD library in Windows 7, follow these steps:

  1. If Windows Media Center is running, close it.
  2. click on start.
  3. in the search box, type regedit.
  4. in the list programs, click on regedit.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  5. Locate and then click the following registry subkey:
  
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Media Center\Settings\Video settings

  6. in the Details pane, right-click VideoGalleryView, and then click on edit.
  7 remove the content that appear in the value data box.
  8. in the value data box, type Gallery, and then click OK. Registry value data: Gallery = Activate My DVD; Play = not to activate my DVD
  9. close the registry editor.

  To verify that the automatic fix worked, restart your computer. You should now see "DVD library" from the menu. To add DVDs, go to the menu information (click on 'i' on the remote control) and select "Add Movies.

  Try this also:

  1. If Windows Media Center is running, close it.
  2. click on start.
  3. in the search box, type regedit.
  4. in the list programs, click on regedit.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  5. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Start Menu
   
  Check if it has a value of HideDVD, and if the value data is set to 1. If the data in the value of HideDVD is set to 1, then you have two options. One option would be to delete the HideDVD value. The other option would be to change the value from 1 to 0 data.
  6. close the registry editor.

  EDITING REGISTRY WARNING:
  Important:   This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
  
  Additional information:

  http://blogs.technet.com/fixit4me/archive/2009/01/02/enable-Media-Center-DVD-library-fix-it-live.aspx

  Aziz nadeem - Microsoft Support

• How to move the VM to another storage without Virtual Center

  Hello-

  I read some other posts on the moving a virtual computer to another storage without Virtual Center and there is a good post, but I have different problems, because my situation is a little different.

  My VC is currently stored on a local storage of the ESX servers.  It is the virtual machine that I want to move to a shared storage.

  You guys can help me with some of the steps I can take to move this shared storage better?

  I'm not too familiar with Linux, so even copy files etc, I'm not sure how to do it.

  TIA!

  Luke

  You are welcome!

  Now you can help us.  Please consider awarding points for 'useful' or 'right' answers

• Hidden from the readers of network duplicate without the letter assigned to the

  I have a computer at work that is connected to duplicate the mapped drives. We discovered a network path error trying to make links in Acrobat. The computer record showed all the correct network paths. When I used the command net 'use' in cmd it showed the mapped drives duplicate without assigned letters that did not appear in the GUI. Here is an example (leaving most of the names in car for security reasons). Both drives below are duplicates of the P: drive. I deleted these duplicates in the cmd window, but it happened again and we cannot understand it. Can someone tell me why?

  Status Local remote network

  -------------------------------------------------------------------------------
  P: OK \\p GING Microsoft Windows network
  A: OK \\p Microsoft Windows network
  S: OK \\P Microsoft Windows network
  W: OK \\c Microsoft Windows network
  Y: OK \\p Microsoft Windows network
  Microsoft Windows for the \\p OK GING network
  Microsoft Windows for the \\p OK GING network
  The command completed successfully.

  Thank you

  Kevin

  Hello Kevin,

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Lightroom Develop module is disabled. Please renew your membership to enable the develop module.

  Environment: User MAC OS X Yosemite purchased V10.10.2 of license complete for Lightroom, version 5.7.1.  I have been using Lightroom for several years.

  I downloaded Lightroom Mobile and creative Cloud was installed visible on the information bar top of the page.  I have use the Mobile with Lightroom application and any information uploaded to the cloud.

  Problem: Creative cloud shows that Lightroom is used on a trail of 30 days.  It is now expired and my Lightroom full license version has stopped working with the message above Lightroom Develop Module is disabled.  I bought the full version and have a license key but not able to get it working again.  HELP please.

  Module development disabled indicates that you use Lightroom which was downloaded from the creative cloud. It cannot be used with a serial number activation. It must be uninstalled, then you can download and install from this link: Adobe - Lightroom: for Macintosh

  After you make the change, you will be able to start Lightroom normally and continue to work with the catalogue, you have worked with that.

• Issues of access to the port noticed when using wireshark

  1. I noticed CDP on wearing my workstation, I could see how this could be useful in using a sniffer to find out which port on a switch, you are connected to. I discovered running on this port without activating cdp avoid advertisements of cdp on port. Most of you turned it off or they leave?  If so is it a company policy to do?

  2. the next strange package race was spanning tree (BPDU?) packets, I saw.  I thought that this is coelio why would you see protocols spanning tree on an access port?  I used the command spanning tree bpudguard suggests that would prevent me from receiving bpdus on an access port.  This did not work, what order you we just to not receive bpdu?

  3. the last one is the one that I find it extremely odd that I receive eigrp Hello of my main switch this switch of access level. The eigrp should just broadcast to other switches running eigrp?

  Hello

  1, it depends. If you have Cisco phones, you have cdp enabled on the interfaces. If you don't use phones, you can disable cdp on the interfaces.

  2, Spanning-tree is a loop prevention mechanism. you want to use the tree covering all the interfaces where a loop can occur. You can introduce loops on the access port if you connect a switch on that port. A switch will always send packets bpdus on access ports unless you specifically configure the switch does not to do this. Spanning tree bpduguard is used to protect a port of bpdu packets. If a bpdu is received on a port with bpdu guard enabled, the port closes because it is an invalid configuration. BPDU guard does not filter packets bpdus on a port. If you want to filter packets bpdu on an interface, you use spanning tree bpdufilter. spanning tree bpdufilter stop bpdu packets sent on an interface.

  3, Hello Eigrp packet are sent on all interfaces enabled for eigrp. To prevent the eigrp packets out all interfaces running eigrp, use the passive-interface command in eigrp configuration.

  Thank you

  John

• Airport network guess without the access control list.

  In fact, on the page AirPort base stations: on the guest network feature, Apple write this:

  "If enabled, access control lists will be applied to both the main Wi - Fi network and the network of comments. If you use Access Control Lists, you will need to add your comments network clients to the list so that they can join. »

  I think that on previous versions of the airport, it was possible to use the network to guess without the access control list.

  The idea is that only the (primary) private network should use this access control list.

  The network presupposes that is give for direct and temporary access (not necessary to access Airport utility, ask your friend and note its Mac address, restart the resort from the airport... for every friend who invited you to home)!

  Is there a workaround resolution?

  Unless you have set up a default rule 'No access' in the timed access settings, then it is not necessary to set up a rule for each "guest." Just give them the password for the network of comments and they will be able to access the network.

  IF... you have set a default rule 'No access' in the timed access settings, then you must also configure a rule for each device that you want to allow to connect with the settings for the time that the device is allowed to access the network.

• Since the update Firefox 6.0, some websites do not load correctly. I suspect it has to do with the Java being disabled because of the compatability modules. When I try to go to Tools/Add-ons, I get the message "Loading" for several minutes without chang

  Update Firefox 6.0 is useless to me because many websites I visit are not displayed properly, I guess because the Java modules are disabled because of incompatibility. They appear correctly in Internet Explorer.

  In addition, the add-on from Trend Micro is not compatible, which leaves me with a positive feeling.

  When I try to check to see if these modules can be updated, the menu item Tools/Addons just goes to a page with "loading" and stays there for several minutes without change until I close it.

  I would like to know the procedure to regularize this version of Firefox to my previous version that worked.

  Firefox 5.0/5.0.1/4.0/4.0.1 and earlier 3.6.20 all contain questions of security and stability that will not be corrected. You put your system at risk by using any version of Firefox that 6.0 or 3.6.20. Any person who displays a link to other versions is to be irresponsible, in my opinion.

  Java
  
  If the incompatible extensions in Add-ons > Extensions are Java Console, you have no need them unless your doing Java development. Most of the users have not yet installed, but Java will install Java Console with each update. You can delete them manually:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

  The only thing that affects the functioning of the sites/Java applets on the web is the plugin (Add-ons - > Plugins) "Java (TM) Platform SE (version)". Do not forget that it is enabled and that you have not all extensions which affect/block "scripts".

  • Check commonly used plugins: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Update or install Java (aka, next generation Java plug-in for the Mozilla browsers): install or update Java in Firefox

  Trend Micro
  
  You must contact Trend Micro or go to the forums on their website to inquire about their plans to update the add-ons/toolbars they install in Firefox.

  Problem with the display of the Add-ons Manager
  
  The Add-ons Manager gets in a loop of loading due to the recent update of Firefox 6 and servers being overloaded because users and update process are looking for updates to the add-on. If you stay away from the "Get Add-ons" selection on the left of the screen of the add-on Manager, you should have no problem with that. This situation is expected to resolve when the overload of Firefox 6 update is complete. I do not always use this "Get Add-ons" option, instead, I go to the website of modules and the search for what I want from there: https://addons.mozilla.org/en-US/firefox/search/?q=clone & cat = all & x = 0 & y = 0

• How to move a local network printer without having to reinstall the drivers

  Hello

  Is it possible to change a printer to a network printer on a local printer without having to reinstall the printer drivers?

  The computer on which the printer (a Lanier LP116c PCL 5 c) is currently connected [directly] is running Win XP.  It is a stand-alone computer without any connectivity; network, internet ect.   He has no printer drivers installed because the computer had been connected to another computer by using working groups and was able to print at the Lanier through working groups.  But now that there is no longer connected to the 'network', but rather directly connected to the printer, it will not be printed.

  I tried to change the properties of the driver to "tell the computer" that the printer is now connected directly however when I try to open the properties I: "printer properties cannot be displayed.  The print spooler service is not running.

  How to 'know the computer' that the printer is now connected directly without having to reinstall the dirivers?

  Thank you!

  Carrie

  You have two questions.  One is assigning the correct port for the printer and the other is fixing what is originally the print spooler service to not run.

  As much as I can give you guidelines on how solve the second problem, it will be much easier for you to uninstall and reinstall the printer (once the print spooler works again) that in order to create a "USB virtual port" which is what needs to be done unless the computer was once a printer connected by USB is installed.

  Often, but not always, an order print spooler is the result of a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If you have ever had (but retired) a Lexmark or Dell - badged Lexmark printer installed, the command "net start spooler" to step below may fail.  In this case, type the following line in the black command prompt window and then type the command "net start spooler" again:

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the =

  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Once the print spooler has started, click Start > printers and faxes, right click on the Lanier printer icon and select properties and select the Ports tab.  If you already have a USB connected printer installed on this computer, there should be a port named USBnnn.  If there is, check the box and OK your way out and your printer should now print when connected by USB.  If there is no USB port listed, then do the reinstall as explained in an Article.  The driver install package available here should create and install the USB port for you: http://www.lanier.com/downloads/driverFrame.aspx?path=http://support.aficio.com/bb/html/dr_ut_e/lan_u/model/c30e/c30een.htm

• The field for local network IPs access permissions

  Is an error or a restriction of the service if I have added ' * ' to avoid restrictions on access area on my app it works only on public IP addresses and is not with local network IPs?

  (ie. my phone WiFi 192.16.1.116 and trying to access information on a pc with 192.16.1.119, result: timeout)

  If the same request is made to a public IP (pc) IE. 200.31.90.37, then it works as expected.

  NOTE:

  -This request for access is made by a webworks installed on the phone app. the answer is in JSONP format.

  -PC firewall disabled.

  Tests failed

  -Tests on wifi, access to a local IP network with the phone on and off data service

  Successful trial

  -Tests on Internet, access a public IP, same phone, same app.

  As indicated in the following link, there is no indication that this behavior is expected:

  http://docs.BlackBerry.com/en/developers/deliverables/27280/Allowing_access_to_external_resources_an...

  If anyone knows an example where "*" works for LAN IPs please let me know.

  Kind regards

  OK... sit tight for this possible explanation

  A BlackBerry has two different designs to consider:

  (1) physical network connection

  (2) selection of transport

  The physical network connection is pretty self explainatory (wifi, bluetooth, GPRS, CDMA).  The selection of Transport can better be seen as a VPN Tunnel/connection.  Such transport may be BES, BIS, direct TCP, WAP etc gateway.

  Even if you're on WiFi, you can still have your transport (VPN) connected through BIS.  This is configured through your application settings.

  The browser from on the BB6 uses special transportation (no available applications) who did essentially the equivalent of a DNS lookup and follows a logic to see how endpoint can be accessed.  It will then forward through the transport that's going to happen to its endpoint.

  So in the browser, it detects your IP address isn't public and a rebooking via the TCP/IP connection direct to go directly to your local server.

  In a BlackBerry application, you must declare your list of transport order which I will try and failover to the other if it is not reachable on the first transport.

  Stopped default transport is in an application of WebWorks BES, BIS - B, TCP_WIFI, TCP_CELLULAR, WAP2, WAP

  More information on transport in WebWorks here:

  http://docs.BlackBerry.com/en/developers/deliverables/27261/Widget_element_834671_11.jsp#RIM_connect...

  In your case, you would have to change the order of the TCP_WIFI put everything first.  WARNING: Different transport have different failover times.  B BIS and BES are instantly switched if they are not enabled with this service. TCP_WIFI will actually make a connection delay before switching.  So if you don't have a WiFi connection, it will timeout on each request for a resource before it tries then BIS - B.

  So, it boils down to what you want your app to be able to do.  If she wants to access the public IP addresses, then you want to keep the default transport order.  If you want it to be able to discover the local and public IP addresses, then you will have a little more work to do.

• How can I find a list of the modules of isntalled without launching firefox?

  Short version:
  Is there a way to retieving the list of modules installed by looking at just the files in the profile folder, without starting firefox?

  Long version:
  OK, I did a very stupid thing: I installed Waterfox, decided I didn't need and when I uninstalled it I check 'delete all settings '. I didn't know that he shared all the parameters with Firefox.

  The (...) funny thing is that Firefox was working at the time, and he trotted without complaining for 4 days... today I closed it, open it again and... everything was gone!

  I could "undelete" the old profile folder, recover most of the files in there. Their use, I managed to restore my browsing session... the most important thing.

  Now, I would like to re - install all the Add-ons I used. However, many of them were installed a long time ago, and often they were selected from others with similar names after trying all the. So, it will save me a lot of time and effort so I can retrieve the list modules installed in the folder of "recovered"... profile an idea? For the record, I tried to copy just the old profile folder to the new, but I run into a lot of problems... so, restarted from scratch and just restore the session and now I was wondering how I can get the list of modules of the old profile, to be able to reinstall...

  Thank you

  Giacomo

  It is a bit tedious, but if you search for the GUID, you can probably get the names of most of these extensions because when people stick their list here in the forum (usually behind the link system more next to their post Details), both are included.

• network location detection. Failed with error 0x8007007E: the specified module could not be found

  Using the internet connection at home:

  Identification of network adapter

  Error failed with error 0x8007007E: the specified module could not be found

  Hi JimQv,

  Check to see if the following is useful.

  Method 1: Run that this automated convenience store and look for the question.

  Improve performance and security in Internet Explorer

  Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• How could I give priority to my network connections, (without turning off the strap attached, as it took), so that it uses the internet from my main network connection?

  Prioritize network connections

  OK, here's the situation.
  I have a regular ethernet connection that provides me with a network and the internet.
  I have also a tablet PC which I attach to my PC so I can use it as a controller. (Not that it is important, but it's for a DAW/Midi controller)

  My problem is that whenever I place my tablet, PC starts by ignoring my normal connection and taking the internet from my Tablet (even when it is not connected to the internet). As a result, my internet is de-energized once I tie it, if I'm not as under the wifi on my tablet.

  My question is, how could I give priority to my network connections, (without turning off the strap attached, as it took), so that it uses the internet from my main network connection?

  Hello

  As well as the troubleshooting provided by Boumediene steps, you can also try the steps in this link. Some screenshots are also available on the link for a better understanding.

  http://www.howtogeek.com/HOWTO/27994/how-to-change-the-priority-of-wiredwireless-network-cards-in-Windows/

  Hope you will find this is useful.