Enable the STM-1 on a CISCO7606-S SPA-1XOC3-ATM-V2

Similar Questions

• Satellite Pro M70-220: how to enable the AGP?

  Hi all!
  I recently bought a toshiba M70-220, I discovered that the GPA or accelerated graphics port is not available, I don't know if it is preinstalled, so I would ask anyone there for please help me with what I have to do to enable the AGP, I appreciate all the efforts of everyone. Help, please. Thank you very much.

  Sam

  Hello

  If you have an Intel graphics card, then I recommend to check OpenGL settings in the properties of the graphics card.
  In addition, you can try to start the dxdiag and you will find detailed information. There you should find the AGP texture acceleration option.

• How can I enable the memory remapping in BIOS on the Satellite A100-192

  Hello!
  How can I enable the memory remapping in BIOS (5.90) on my laptop?

  Thank you.

  Hello

  It seems a problem with the Microsoft 32-bit Windows operating system.

  Please check this:
  http://support.toshiba-tro.de/KB0/TSB7601WE0007R01.htm

  You can find this info:

  _Issue: _
  I put in the memory 2x2gb in my book * and the BIOS * and the operating system is worth about 3 GB

  _Solution: _
  This is a limitation of the 32-bit system.
  System resources need of addressing which overlaps physical memory below 4 GB.
  These requirements can reduce available addressable memory space to and reported by the operating system

• Satellite Pro A200 - 1 MI: how to re-enable the touchpad

  Hello

  I recently bought a new Satellite Pro A200 - 1 MI (psae7e). Thing is that while I was using it at the start there was this allocation at the beginning which allowed us to use the shortcut keyboard (fn + keys) on the screen.
  It was at the top of the screen.

  So I clicked on the tab to disable my touchpad but now I can't seem to activate the touchpad and accidentally closed this keyboard shortcut help too.

  So all tried to re-enable the touchpad; reinstalled driver, tried to install the touchpad power and everything...

  Please help me.
  If there are questions to ask...
  I really hope that someone could find an answer for me.

  Thanks in advance,
  Sabil

  Hello Sabil

  You can restart Flash cards: start > all programs > Toshiba > utilities > settings for Flash cards. Open these settings and clear the check box in front of the option to disable.
  I hope that you will be able to use Flash cards again.

• Satellite L500 - how to enable the WLAN?

  I replaced a hard drive of mine (L500 PSLS0A - 08 p 002) and I installed Windows7 64 bit on it.
  I used to market its WIFI by pressing the FN + F8 keys.
  But now I can't on it using the method.
  I downloaded its end drivers.
  In reality its all the function keys do not work.
  Please let me know how to enable the WLAN and function keys.

  Hi kim2kjy,

  You have installed Windows 7 Toshiba or normal Microsoft disk recovery disk?

  The FN keys to install Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded on the official page of Toshiba.

  Check this box!

• Equium A110-252: how to enable the wireless function?

  Hi, first time ive been on this forum. I recently bought the toshiba satellite (think that's the spelling) and a wireless router. now, the router works well with my other computer, is very fast, but I can't go online with the laptop. all the info I get, is that the wireless is not activated? its got beat me, so I hope someone out there can help me to solve the problem, so I can start using my laptop in the room. Thanks in advance. Susi

  Hello Susi

  The first use of WLAN switch and move it to THE post. The WLAN control light should be on. After this check in If Device Manager card is correctly registered.

  The last step is to use the FN + F8 key combination to activate and enable the wireless network adapter. When activated the WLAN connection must be configured correctly. I assume that your camera comes with WLAN client utility. If you use this utility to configure the WIFI connection, please ensure that this WLAN Windows option is disabled.

• Satellite C660 - 15K - how to enable the wifi module?

  Laptop has no mechanical switch the WiFi module.
  What utility or driver must be installed to enable the WiFi module?

  Network adapter driver installed with no problem, in the properties of the computer module is active and active, but does not see available networks.

  Assistant to Toshiba at the same time said that the module is disabled...

  Help, please!

  > What utility or driver must be installed to enable the WiFi module?
  You must activate the Wlan using FN + F8 key combination.
  Have you tried that?

  If this does not work, then you must install the VAP (value added package) and utility support Flash Card that controls the keys FN.

• Satellite L840/020 - can't get into BIOS after enabling the quick start option

  I have a laptop Toshiba L840/020 (PSK8LA-020007). I recently installed a 330 Series SSD and Windows 8 Pro RTM 6.2.9200 MSDNAA on this Intel and enabled the fast boot option in the BIOS (boot speed > fast).

  Now I can't get into the BIOS, no matter what I do. I tried pressing the power button / stop while pressing F2 (as suggested by a few other forums), upward on default that I tried all F and Esc keys, but nothing does. I also tried repeatedly pressing F2 during startup, plugged a USB external and supported on F2 keyboard on it, but no matter what I can't get into the BIOS.

  When I go to the Toshiba support download section > 8 64 bit Windows, I see also a BIOS update for my laptop, but when I try to install I get the following error:

  ---------------------------
  Error
  ---------------------------
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1
  ---------------------------
  Ok
  ---------------------------

  I'm not changing platform.ini and flash, without first asking the help of the community.

  Please let me know how to enter the BIOS. Thank you.

  null

  Hello

  First try INS then F2 key.

  Then you should be able to access the BIOS, I recommend disabling the QuickStart in the BIOS if you can successfully enter the BIOS.

  With regard to the update of the BIOS.
  I checked the page of the Toshiba driver to THE and it seems that the BIOS v6.20 is even similar to Win 7.
  I think that the BIOS update must be done running the system pre-installed Toshiba since Win 8 is not officially on the market, and to my knowledge, there are some big restrictions updated BIOS running Win 8

• Satellite P750 - 02K - how to enable the wireless interface?

  Hello

  I just bought a new laptop Satellite P750 / 02K with Windows 7 64 bit. How can I enable the wireless interface?

  I tried the Fn + F8, but it says it all, this is the 'wireless communication is disabled. Please activate the wireless communication switch. There is no switch that I see. The device driver is enabled and active. I even tried to reinstall the driver. The user manual makes no reference to a process physical either pass. I checked the BIOS but see no setting for all the wireless settings. I tried to restart the flash without result map.

  Any suggestions? Thank you.

  Hey Buddy,

  I Don t Satellite P750 in front of me, but the wireless network card is in the Device Manager?

  On Satellite P750, there is a tactile button between the screen and the keyboard to turn the WLAN function. The second button on the left (symbol of the antenna), you need to press to activate the WLAN.

  Also, check the BIOS. As I know most notebook contains an option for the WLAN that must be set to active.

• to re-enable the printer hp all-in-one

  I accidentally deleted my all-in-one printer to my computer by pressing the wrong button.

  How to re-enable the device plse?

  The printer in question is hp all-in-one deskjet 2050 J510 series.

  I also use Windows 8.1

  Kindly give me easy step by step instructions as I am that an old age pension at retirement cvil servant and slow on the uptake at my age.

  Thank you very much.

  JoeBuzu

  Here is a link to the complete software.

• How to set up and enable the WINS and WINS-R resource records?

  How to set up and enable the WINS and WINS-R resource records?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• How can I enable the memory remapping?

  I want to know the steps I must follow to enable the memory remapping. what I should I look for in the search bar of windows, the run menu, etc..

  Hello

  -What is the operating system installed on your computer?
   
  To enable the memory remapping, I suggest you enable in the BIOS and check if it helps.
  BIOS - how to enter the BIOS?
  Each computer is different, when you turn on the computer, it should tell you what button to push to get into the BIOS. This is usually one of the following values, and you have to push it in the first 5 seconds: F1 F2 F10 F12 ESC LED
  Once in the BIOS find the menu with the remapping of memory, it is different on each computer.
   
  Enable memory remapping feature
  Check the BIOS settings to see if the memory remapping feature is enabled. Remapping memory access Windows for more memory. You can enable the memory remapping feature in the BIOS by starting the configuration of the system. See the Guide to your computer for instructions on starting the installation of the system on your computer. The name of the memory remapping feature may be different for different hardware vendors. This may be listed as remapping memory, memory expansion, or something similar. Don't forget that your computer can not supported the memory remapping feature.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   
  For reference:
  Usable memory may be less than the memory installed on Windows 7 computers:
  http://support.Microsoft.com/kb/978610
   
  Hope this information helps.

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• Whenever I have check the regional settings to enable the Arabic language (from right to left), I get a dialog box insert the CD I did not!

  Hi Srinivas

  I have the same problem, my company is located in Singapore and I ' am assigned to Saudi Arabia, and I need enable the Arabic language (from right to left).  Whenever I have check the box in the locale, I get a dialog box insert the CD I did not!

  Now, is there a link I can use to download this file, preferably through your site (to not be deceived by the other download sites) even if its price?

  Thank you

  Sammi

  http://support.Microsoft.com/kb/821080

  You need your XP OS CD it can work if you borrow one.