Encoder and S series

Similar Questions

• Difference between the Tecra A, M and S series

  Hello
  What really is the difference between a, M and S Tecra series? Which should I choose?
  It is obvious that the Tecra is supposed to be a high-end standard in the range of the portable Toshiba, but why they do different Tecra series?

  I'm sorry if this has never asked, but can't find the answer.
  And thanks to all who responded.

  Regars,
  -nov

  Hello

  I am user Tecra M and each series has my own opinion design and hardware configuration. The availability of different series can be nice for potential buyers and costumers let them choose the preferred product.

  If you need Tecra for business, I can really recommend laptop Tecra. I use it more than two years and it works like the first day. It is very important that you know exactly what you want to do exactly, and you can choose your favorite.

  If you want to write what you expect from a laptop. It will be perhaps easier to give you a specific recommendation.

  Good bye

• Floppy disk drives for Satellite Pro 4200 and 4300 series

  I have four portable Satellite Pro - a 4340, a 4310, a 4270 and a 4280 and I have trouble getting the 4310 and 4270 to recognize a particular floppy drive. My understanding is that Mitsumi D353G FDDs were consistent with these laptops 4200 and 4300 series but I can't get the 4270 and the 4310 for «see» They will all be two however 'see' an FDD alternative I - a Pansonic JU-226A202FC, but I only have one of them and two laptops needing a floppy drive replacement. I tried a D353G I know (from my 4280) works in the 4310 and the 4270 but nothing helped. I'm keeping an eye on for an another Pansonic JU - 226A202FC FDD on ebay but no luck so far. It's frustrating because I don't know a FDD D353G expected to operate in the 4270 4310 and I have two spare ones that I wanted to use. I looked in TSETUP.exe and you can see no settings that I can change to make these laptops see floppy D353G so any help or insight greatly appreciated readers. Someone there a 4270 a 4310 runs successfully a floppy D353G drive or is this a quirk and these two particular models were made only to work with a Pansonic JU-226A202FC floppy drive not D353G disk drives? Clues?

  Hello

  Unfortunately, I am not a technician but I guess that there is clearly a problem with compatibility. It is possible that the assignment of pins is different and you cannot use them. If you want to have a precise explanation, you should contact technicians. I'm sure they have diagrams of the motherboard and can give you a good explanation and Tips how to handle this problem.

  Good luck!

• Microsoft sidewinder gamepad 2 does not work on the Combat Flight Simulator WW11 and Europe series

  Original title: I have the Combat Flight Simulator WW11 and Europe series. My microsoft sidewinder gamepad 2 does not work on my XP and my Windows 7 computer. The joystick works on CFS2 Pacific. Help, please.

  I have a HP Pavilion p6717c with a radion HD 6900 graphics card. With windows 7 home

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you get any error message?

  I suggest you to see link below and check if it helps.

  You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer: http://support.microsoft.com/kb/294672

  How to fix game controllers in Microsoft games: http://support.microsoft.com/kb/831361

  Items of Combat Flight Simulator: http://support.microsoft.com/combatflightsimfaq

  Also I suggest you to send your request in the below link.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Hope this information is useful.

• Double retroactive loop via an encoder and a tachometer

  I'm building a human rotating Chair for research purposes and want to use a double retrospective loop to remove the backslash. The current system, however, includes only 1 Encoder on load (President) and 1 tachometer and the engine due to the geometry of the system, I can not put an extra Encoder on the motor. I would like to know if there is a controller of axes OR which may take a signal encoder and tachometer signal (speed - analog signal) to close the double loop retroactive.

  Please refer to the attachment for the functional diagram of the system.

  Thanks for any help.

  Hi Ron,

  Based on your schema, I don't see a way to do - are you willing to do all the control without firing the values in LabVIEW?  If so, then I don't see a way to do this.  If you pull the tach values in LabVIEW, you have more options, but none is as complete, having a second encoder.

  All movement PCI cards offer analog inputs, so that you could potentially play in the tachometer signal.  However, what kind of signal it is up?  If its RPM, there is a bit of calculation to actually determine the velocity and I worry not with that many steps in the software, you will kill any 'control loop price' that you may have.  I don't think that the system would be too sensitive if you have to shoot these values in the software; and unfortunately it is not "currently a movement card that reads these signals directly."

  I hope this helps.

  Marti

• Games similar to the command and conquer series?

  Can someone recommend me a list of strategy games that is similar to the command and Conquer Series(Command and Conquer Red Alert;) Yuri revenge; Tiberium Sun, etc.) ?

  One who can run with this old PC platform:

  Microsoft Windows XP SP3
  Intel Pentium IV CPU 2.00 GHZ
  256 RAM
  Radeon 7000 / Radeon VE Family (Microsoft Corporation)

  Thank you!

  Hi saudate,
   

  Please use your favorite search engine and look for one of these programs that is used but be sure to check the system requirements for the game to check its compatibility with the operating system.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• Retrigger encoder and acquisition of analog input on the spur of Z?

  I have a card PCI-6232 and use THIS angular Encoder on the counter 1 to provide a base mean angle for Internet high speed (50-100 kHz) measures the analog voltage.  I use a period of CI on counter 2 to measure the duration of the impulse of Z to determine the length of each measure.  It kinda works, but the result is somewhat contradictory.  I get about 1 in three cycles without encoder data.  I need to find a way to trigger the acquisition to record data for each cycle trigger on the pulse of Z.  If you know another way to do this I'd be open to that as well.  Thank you, Steve

  Hi Sara,.

  Thanks for your reply.  What I wanted to do was to trigger an analysis of the encoder and an entry at the same time triggering the pulse of z analog encoder.  It took a lot of digging through similar samples and after a week of fighting, I thought about it tonight.  I'll post this once I clean up the mess.  Problem solved thanks to dozens of you ad info and samples!

• Base64 encode and decode

  Hello

  I use opennssl for encoding and decoding base 64 and face to face some of the question, he refuses to randomly to encode or decode, to give me a result of 0 and not false BIO_SHOULD_RETRY... I'm trying to put the call in a while if return 0, but it does not work and so I can not decode or encode more...

  The code I am using:

  uint8_t* Tools::base64(uint8_t *input,  uint32_t length)
  {
          BIO *bmem, *b64;
          BUF_MEM *bptr;
  
          b64 = BIO_new(BIO_f_base64());
          BIO_set_flags(b64, BIO_FLAGS_BASE64_NO_NL);
          bmem = BIO_new(BIO_s_mem());
          b64 = BIO_push(b64, bmem);
  
          // write data
      bool done = false;
      int res = 0;
      while(!done)
      {
          res = BIO_write(b64, input, length);
  
          if(res <= 0) // if failed
          {
              if(BIO_should_retry(b64)){
                  continue;
              }
              else // encoding failed
              {
  
                  qDebug("error while encoding base64");
                  done=true;
              }
          }
          else // success!
              done = true;
      }
  
       //   BIO_write(b64, input, length);
          BIO_flush(b64);
          BIO_get_mem_ptr(b64, &bptr);
  
          uint8_t *buff = (uint8_t *)malloc((bptr->length)+1);
          memcpy(buff, bptr->data, bptr->length);
          buff[bptr->length] = 0;
  
          BIO_free_all(b64);
  
          return buff;
  }
  
  uint32_t Tools::decode64(uint8_t *pInput, uint32_t inputLen, uint8_t ** ppOutput)
  {
          BIO *b64, *bmem;
          uint32_t readLen;
  
          (*ppOutput) = (uint8_t *)malloc(inputLen);
          memset((*ppOutput), 0, inputLen);
  
          b64 = BIO_new(BIO_f_base64());
          BIO_set_flags(b64, BIO_FLAGS_BASE64_NO_NL);
          bmem = BIO_new_mem_buf(pInput, inputLen);
          bmem = BIO_push(b64, bmem);
  
          // write data
      bool done = false;
  
      while(!done)
      {
            readLen = BIO_read(bmem, (*ppOutput), inputLen);
  
          if(readLen <= 0) // if failed
          {
              if(BIO_should_retry(b64)){
                  continue;
              }
              else // encoding failed
              {
  
                  qDebug("error while decoding base64");
                  /*int reason;
                  BIO_get_retry_BIO(b64,&reason);
                  qDebug() << "reason of bio bug " << reason;*/
  
                  //dont know what to do ;-(
                  done=true;
              }
          }
          else // success!
              done = true;
      }
  
          BIO_free_all(bmem);
  
          return readLen;
  }
  

  If you have ideas do not hesitate to discuss it!

  Thanks in advance!

  Try http://qt-project.org/doc/qt-4.8/qbytearray.html#toBase64

• Differences between 2000 WLC and 4400 series

  In addition to the number of access points supported, what are the differences in features between the WLC 2000 and 4400 series?

  On 2006, you have 4 ports on the back, which can support up to 3 AP directly connected and the port other than your connection to the network and it supports no LAG (aggregation of links). The ports are 10 / 100M, and he cannot be an anchor for a group of mobility.

  On the 4400, either you have a 4402 or a 4404, 2 a 2 interfaces concert and the 4404 has 4 Gig interfaces, you cannot directly connect AP to a 4400. The two 4400's support LAG, and they can serve as anchor points in a group of mobility. What are the major differences in them. They set up near the top of the same and interact with the trendy and the same wireless networks.

• Protocols for switches 300 and 500 series

  These protocols are supported by the 300 and 500 series switches?

  • TCP
  • UDP/Unicast
  • UDP/Multicast
  • UPnP
  • RTCP
  • RTSP

  Thank you

  Dear Alejandro,

  If you mean the switch weather can pass through these protocols the answer is a definitive Yes. If you meant something can else you please describe what you mean?

  For example, THAT TCP is supported in a way that it can filter traffic based on the TCP port (layer feature 3 +), so can he do to UDP. Multicast is also managed through IGMP support. About RTCP and RTSP how / why would you use it?

  Thank you and best regards,

  Zsolt

• Creating Windows Dvd encodes and burns, but the dvd is blank.

  * - Original title - when I put my movie in Windows Dvd Maker, it encodes and burns.

  . But when he ejects itself there is nothing on the disc it just says: disc... Why - what is happening to you, it has worked well in the past. Using Windows 7 please help?

  Hello

  1. What is the type of file that you burn in the disk?

  2. have you made changes on the computer recently?

  3. are you able to burn the disc using any third party CD or DVD burning software?

  Once you get a message that the burning is complete, check the size of the free space and space used on the DVD.

  For information about how to check the user-space and the free space, you need to right click on the DVD drive, and then click Properties.

  Well, it seems that when you burn a CD or DVD, the disc is not finalized.

  For reference.
  Close or finalize a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/close-or-finalize-a-CD-or-DVD

  Burn a DVD-video using Windows DVD Maker disc: http://windows.microsoft.com/en-US/windows7/Burn-a-DVD-Video-disc-with-Windows-DVD-Maker

  I hope this helps.

• Y at - it a fix for leak of VRAM in Windows Desktop? (Windows media Encoder and photo IE10 Viewer are the root of the problem)

  It seems that Windows media Encoder and photo IE10 Viewer are the root of the problem, and it is about the whole MS Platform in desktop for what anyone associated media.  As easy as it is to use another browser or image viewer I find I like the windows photo viewer ability to preview multiple images and IE10 and 11 are more now then fix everything that exists.

  The issue is having to restart or log out and back in just pass leak VRAM that can go up to 1400 MB and count. What said GPU - Z and ESTR.  The memory of the system seems to be in check most of the time.  Get off my GPU memory Windows.

  I mean leak even with the left running only windows desktop and essential tasks to keep it that way.  I have games that will never saturate 1.5 GB of video memory on my setup. Darn Far Cry 3 does not work.   I'm ranting, namely. At the same time being a little in-depth play play of this recurring problem.

  In case the VP and general manager or anyone else to Microsoft is approaching through it all here is the short version:

  Video memory leak in Windows 8. How can I fix this in the Windows desktop. Is there a way to erase the GPU cache and reduce the use VRAM 160MO? is there a fix? is there a value from regedit?

  Hey Marv,

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=W8

  Hope this information is useful.

• I'm trying to generate an arithmetic and geometric series/sequence with JavaScript.

  I try to generate an average arithmetic and geometric
  series/sequence with JavaScript. The thing that makes this challenge is that
  I use user input to determine the parts of the formula that I use for
  generate each sequence. I tried running the formulas, but I learned that I was
  channels running through them and not numbers. How to generate my
  sequences/series and always use user input? PS, here's my formulas: (a1-East
  first term, d and r are difference/ratio, and n is the n-th term)
  

  1.) a1 + d * n  

  2.)a1 * r^n

  Entry user of a form is always a string. There are several ways to convert a string to a number in JavaScript:

  • Pass it as an argument to Number()
  • Pass it as an argument to parseInt() (for an integer)
  • Pass it as an argument to parseFloat() (for a floating-point number)

• I have the Prime Minister but not encoder and im trying to export videois to how put it on dvd

  I have the Prime Minister but not encoder and im trying to export videois to how put it on dvd

  You must follow the instructions to download/install Encore DVD creating program, as long as the content of the library and put in place so that when you open it, you have all the stuff to work.

  Article download/install Adobe Encore:

  https://helpx.Adobe.com/Encore/KB/Encore-CS6-installed-cc.html

  http://helpx.Adobe.com/Encore/using/download-library-content.html

  Neil

• I downloaded an upgrade LR6 - just got an email that took my 30 day trial period end - I and #s series LR5 LR6 - how do I turn on beyond the trial?

  I downloaded an upgrade LR6 - just got an email that took my 30 day trial period end - I and #s series LR5 LR6 - how do I turn on beyond the trial?

  Go to Lightroom > help >. Disconnect

  1. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /users/folder/Library/Application Support / Adobe / OOBE
  2. Rename the file opm.db in opm_old.db
  3. Launch of Lightroom
  4. Enter the serial number