Encoding Multiple TDMS defined properties efficiently

Similar Questions

• How interrogate the EM repository for a list of targets that have no targets defined properties and therefore will not be members of groups identified by the hierarchy of administration.

  Hello

  Asked me to do in control cloud 12 c,

  ""Repository queries EM to get the list of targets that did not target defined properties and therefore will not be members of groups identified by the hierarchy of administration.".

  and I was looking for more information on how to do it but I can't find anything on the repository tables, and I can't find how to get this cloud control options.

  Thank you

  Matt

  Management Group page, go to the Associations tab and click the target report unassigned

• new components written in tdm/PDM file not found

  Hello

  I try to record some simple thermocouple data in a file of tdm/PDM.  I run my vi and it seems to work perfectly. I use the example started get NEITHER 9213 as base and added tdms open, PDM defined properties, PDM write, and PDM closes.  I can see the data in streaming on the waveform table, but when I hit stop and pick up the saved file I can't find it.  What I am doing wrong?

  Thank you

  
  

• File encoding

  Hello

  I want to encode my. PDM and the file could not be open anywhere other than software. Is it possible to encode the TDMS files?

  OpenG has a utility Zip (http://wiki.openg.org/Oglib_lvzip) with the support of password. He meets your needs?

  A sample VI to compress and decompress a file with password is attached.

• Use attributes TDMS in VBscript DIAdem

  Greetings,

  I wrote the data set such as TDMS attribtutes properties and I would now like to call these attributes as variables in VBscript DIAdem.  I searched that help still does not find the proper syntax to call a PDM attribute.

  Thank you!

  Hello Space_Fligh,

  This should help hopefully:

  I created a property called 'Test' on the level of the root (file property), and the value of the property is accessible through this variable: Data.Root.Properties ("Test"). Value

  I also have a property named "Test" on the level of the channel to a channel called 'Temp', and the value is accessible through this variable: Data.GetChannel("[1]/Temp"). Properties ("test"). Value

  -What helps your question?

• 'Length' of reading TDMS channel property

  Hello

  I wonder if someone could point me the right direction please. I could not seem to be reading "Length" property of TDMS channels using vi «PDM get properties» I read it easily. In the worst case I might eventually write a 'Channel Length' property at the time of closing vi after dividing the total duration of sampling frequency and its reading back! I hope that there is a very good way to do this?

  k waris wrote:

  Hello

  I wonder if someone could point me the right direction please. I could not seem to be reading "Length" property of TDMS channels using vi «PDM get properties» I read it easily. In the worst case I might eventually write a 'Channel Length' property at the time of closing vi after dividing the total duration of sampling frequency and its reading back! I hope that there is a very good way to do this?

  It would be useful to see your code. He did to wire a digital constant to the type of input data? When left unwired it looks like a string, and since it is a numeric value it returns nothing.

  Also, make sure you have the name of appropriate property for the file EXAMPLE.tdms (example of file supplied with Diadem) in Diadem property Name length is displayed but when using TDMS get properties, you can see that the name of this property is actually NIChannelLength.

  Ben64

• Simulating multiple virtual channels per physical channel

  I have make steps high speed with several channels simultaneously and am wishing to be able to store the raw data and the version to the unique scale of the data both in tdms files.  However, I am wanting to be able to apply properties for the versions on the scale and not scaling separately, mainly to keep the data clean and usable, as well as to ensure that in 6 months when we look at the old data to establish anything confused reports.  I know that several virtual channels may be established by a physical channel, but then they must be played in order.  Is it possible to simulate this process, or give an another stream of distinct to write to the tdms file properties?

  First of all, media DAQmx LabVIEW 8.2 9.0 and later, so you should be able to use the new feature.  That being said, for your application, it wouldn't work that well, since you are eager to keep the original DAQ signal so a new signal scale.  This function stores the data as you would see in DAQmx Read.  Information of scaling you apply can be performed by using a custom in DAQmx scale, but you 'lose' the original file (RAW).  However, if you store the scale factor in the properties (as explained below), you could get back to the original data at a later stage (by dividing by the appropriate scale factor).  If you buy 2.5 MECH data. / s, you can consider this solution in the interest of performance.

  That being said, if you need signals separated for raw and scale, this feature might not do what you are wanting.

  Therefore, in answer to your question immediately, if you want these signals to be in the same file, PDM, it's quite possible.  Here are comments by looking at your VI to this effect:

  1. on the PDM write call and son in a 'group name' such as 'Gross' or 'ladder '.  Which splits the data properly to make it obvious what is what.

  2. If you want additional information must be stored with the Group (as the scale factor), wire in your group name in the PDM Set properties VI you have and set the 'names' and 'property values' properly.

  3 certainly, wire in the same refnum TDMS to all functions of PDM.

  Let me know if you have other questions about it.

• Modules Modules and custom project properties

  I have a module and a module, allows you to call their hand and the child.  I'm defining properties of custom hand modules, project level but once the module is included, custom properties are not long available to the engine API.  I tried all the combinations defined on the module, on the consumer, on the two, etc. Nothing.  What is even more frustrating, is that when I crack open the ZIP file and the .rmod, I can see the definitions in the XML file.

  All other custom properties are cool... entity, relationship,... only project level attribute those...

  Why doesn't this work? Is there a way to pull this off?

  Daniel,

  This certainly seems to be a bug. It seems that custom properties can be used when you include modules.

  What have you tried to do with the custom property? Probably there's a simple work-around by setting a global attribute of the text with the value you want in the custom property.

  In the meantime, I will raise this as a bug

  See you soon

  Frank

• Import of user-defined triggers

  Hello
  
  I need to import multiple triggers defined by the user from a diagram of a DB to another DB. Is this possible in 11G? Can someone help out me.
  
  Thank you
  Sunita

  If you need only export and import triggers, you need to generate the script for all the triggers (manually or by using the DBMS_METADATA.) GET_DDL.

  DBMS_METADATA. GET_DDL (object_type => "TRIGGER", name => 'TEST_TRIGGER');

  to get the script of all triggers associated with a table

  SELECT dbms_metadata.get_ddl (object_type-online "TRIGGER", name-online trigger_name) IN user_triggers WHERE table_name = 'EMP ';

  Maybe this can help you.

• Sort channels PDM

  I read the channels of a PDM file data. The strings are different frequencies which data have been saved. However, they are not in order. For example, what channels can be organized, 1 Hz, 2 Hz, 3 Hz, 7 Hz, 5 Hz, 4 Hz. I am trying to sort these channels to be in my file. Or another option would be to define and "lock" the channel order in the PDM before collecting data.

  Now, I know what you mean. The mixture of channels, it's because of the "NI_MinimumBufferSize" property that caches the raw data until it reaches the amount you set.

  You are right that once a channel is added to the file, its place is defined. So, you can try to put a "flush TDMS" right after the node of your "TDMS set properties. Once the channel with properties is emptied to file on disk, the place is defined.

• The gateway configuration GemFire 7.0.1 via Java APIs is unable to successfully deploy

  I followed the instructions here: (WAN) multi-site Configuration.

  I have been unable to deploy a gateway and according to me, Miss me him a little bit of configuration, but I can't identify what it is.

  # loc1.properties
  jmx-manager-port=1899
  mcast-port=0
  remote-locators=localhost[11045]
  
  
  
  distributed-system-id=1
  

  gfsh start locator - name = loc1 - port = 11044 - properties-file = loc1.properties

  # loc2.properties
  jmx-manager-port=1999
  mcast-port=0
  remote-locators=localhost[11044]
  
  
  
  distributed-system-id=2
  

  gfsh start locator - name = loc2 - port = 11045 - properties-file = loc2.properties

  String license = "== omitted valid WAN enabled key ==";
  String serverName = "node1";
  
  CacheFactory cacheFactory = new CacheFactory();
  cacheFactory.set("name", serverName);
  cacheFactory.set("mcast-port", "0");
  String workingDir = String.format("c:/software/ssw/%s", serverName);
  cacheFactory.set("license-working-dir", workingDir);
  cacheFactory.set("deploy-working-dir", workingDir);
  cacheFactory.set("locators", "localhost[11044]");
  cacheFactory.set("license-data-management", license);
  cacheFactory.set("distributed-system-id", "1");
  Cache cache = cacheFactory.create();
  cache.setIsServer(true);
  
  CacheServer cacheServer = cache.addCacheServer();
  cacheServer.setPort(30303);
  
  String gatewayName = String.format("%sSender", serverName);
  RegionFactory replicatedRegionFactory = cache.createRegionFactory(RegionShortcut.REPLICATE_PERSISTENT_OVERFLOW);
  replicatedRegionFactory.addGatewaySenderId(gatewayName);
  replicatedRegionFactory.create("TestRegion");
  
  cache.createGatewaySenderFactory().setParallel(false).create(gatewayName, 2);
  cache.createGatewayReceiverFactory().setStartPort(12000).setEndPort(12009).create().start();
  
  cacheServer.start();
  
  
  
  
  
  

  Each member starts and runs but when inspecting via "list gfsh gateways" I have the following message:

  [warning 2013/11/15 13:56:50.148 CST loc1 <RMI TCP Connection(3)-172.20.121.109> tid=0x56] (tid=11 msgId=11) Errorjava.lang.Exception: node1 is an invalid member name or Id
    at com.gemstone.gemfire.management.internal.beans.DistributedSystemBridge.validateMember(DistributedSystemBridge.java:694)
    at com.gemstone.gemfire.management.internal.beans.DistributedSystemBridge.listGatewaySenderObjectNames(DistributedSystemBridge.java:1218)
    at com.gemstone.gemfire.management.internal.beans.DistributedSystemMBean.listGatewaySenderObjectNames(DistributedSystemMBean.java:344)
    at com.gemstone.gemfire.management.internal.cli.commands.WanCommands.listGateway(WanCommands.java:603)
  
  
  
  
  

  This message is incongruous with ' gfsh describe config - Member = node1':

  gfsh>describe config --member=node1
  Configuration of member : "node1"
  
  JVM command line arguments
  -------------------------------------------------
  -Didea.launcher.port=7542
  -Didea.launcher.bin.path=C:\software\ide\IntelliJ
  IDEA
  12.1.4\bin
  -Dfile.encoding=UTF-8
  
  
  GemFire properties defined using the API
  .................................................................................................................................
  deploy-working-dir                       : c:\software\ssw\node1
  distributed-system-id                    : 1
  license-data-management                  : === omitted ===
  license-working-dir                      : c:\software\ssw\node1
  locators                                 : localhost[11044]
  mcast-port                               : 0
  name                                     : node1
  
  
  Cache attributes
  .................................................................................................................................
  is-server        : true
  
  
  Cache-server attributes
  . port                 : 30303
  
  
  
  
  

  Has anyone tried to get a bridge linking purely Java API?

  Thank you

  Jeff

  Jeff,

  I appreciate you are trying to help.  I expect to have a setting that I forgot.  Your suggestions were valid and I have test again each of these this morning.  I think I've identified the problem and it isn't really a problem code, setting issue or a question of GemFire. I think that our network of local offices has a particular configuration that affects GemFire in a unique way.

  In my test, I used localhost as the address for locators and remote control-locators.  I changed to be my explicit hostname and I do not see the error longer.  I am able to inspect bridges via gfsh and start them.  FYI: I witnessed a different symptom with the new product of the pulse.  When you try to deploy the war impulse locally I be watching only partial functionality.  The application of impulse load but could not inspect the data nodes, but I could see the locators.  I played with each of the possible combinations (ip address, host name, localhost, qualified domain host name) and the only way I could solve the problem of the impulse was to use the host name.  It smells the same number of local network.

  I'm working on a Windows desktop computer and use an active Windows with DHCP domain controller.  Production deployment is on RHEL and should not encounter these problems.

  Thank you

  Jeff

• How to create a new class

  Hello
  
  I am trying to create a new class called Questions, which has two properties (type and condition).
  Action script is saved in the myComponents the project folder.
  
  When I compile the application, I get the following error message:
  "1172 definition myComponents:Question is not found."
  Why?
  
  How to call a constructor for a new class, which is not an extension of an existing class?
  
  Concerning
  / Acke
  
  //-----------Class----------//
  myComponents package
  {
  Import all classes in the package mx.events
  Mx.events import. *;
  
  public class {Question
  
  Public constructor.
  public var {Question()}
  Call the constructor of the superclass.
  Super();
  }
  Define properties and methods.
  Define the public vars.
  public var type: string;
  public var status: string;
  }
  }
  
  //------Main----------//
  <? XML version = "1.0" encoding = "utf-8"? >
  "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute".
  xmlns:mycomp = "myComponents.*" >
  
  < mx:Script >
  <! [CDATA]
  Import mx.controls.Alert;
  Import mx.events.CloseEvent;
  Import myComponents.Question;
  etc, etc...
  
  

  Stupid me!

  I have two projects, Quest and AutoQuest, and I recorded it under that bad!.

  Thus, it is important now as it should.

  Thank you all for your efforts.

  Concerning
  Acke

• Get the names of cluster variables

  I have a cluster with a number of numeric variables that are grouped by names. The names and their associated values are now to provide a header of PDM-file via the "TDMS Set Properties" VI. This VI requires the names and values to be separated in the entries of "Property values" and "property names. My question is how to get the names of variables out of the cluster of an array of strings?

  I hope that there will be a nice solution for this but I have not found it.

  The 'Get Array cluster names' suggestion of the community seem to be adsvanced?

  Based on the suggestion of OpenG , here is an excerpt:

  

  Tone

• Bars hidden not resizing fp

  Hello

  I just upgraded to LabVIEW 2013 32 bit (f2 patch installed) on Win7 64-bit.

  Since then, at least one of my screws (main application vi) shows the following behaviors:

  When running the scroll bars and the menu bar that must be hidden as defined properties are replaced by a white area, but the window is not resized.

  This causes the fp to be larger than defined in the properties and look ugly.

  An another vi (main vi from another app) shows similar behavior:

  It displays the same white area and therefore a fp oversized, but it does only for a second after I hit, and it comes to resizing of the window.

  I could not find a difference in the properties of these two screws - now goes to double check.

  Any suggestions?

  Best regards

  Florian

  See if my answer here can solve your problem. Seems similar. (read the entire thread).

• Can someone explain why these two paintings 'look' different even if they are from the same source?

  Hi all!

  I'm just curious, why these two tables are different and are they really different in terms of structure, even if they are from the same source? The left is the exit of tdms get properties and the other is a power of arry auto indexed.

  Nilesh-

  No doubt, you are referring to the visual aspect, since the data are the same. One of them uses a different type of indicator of the chain. You probably click right and choose 'create-> Indicator '. When you perform this LabVIEW will use the same style of indicator as what sub-VI/uses. In case you made directly from the PDM function, but the other was created between the autoindex loop tunnel for, in the second he used everything that was default in your preferences.