Encrypted communication of VIX

Similar Questions

• Activate a call encrypted on SX80 recorded on CUCM

  Hello community,

  We have heaps of endpoints SX80 on CUCM. We are trying to activate the encrypted call but cannot work.

  On the endpoints SX80 Configuration > conference set us the encryption mode on IT. If we try to point-to-point call, the call is not to connect. The two end points are set to Encryption mode WE. When the best value Effort it works but it says ' do not call encrypted.

  Are there settings that we need to check on the side CUCM?

  Thank you.

  Are you using a non-secure telephone profile or secure?

  To enable encryption, you must use a secure phone profile.  See the "Encrypted vs encrypted communication" section the Telepresence Endpoints Deployment Guide for CUCM 11.0.1 (CE8.0) on pg 4.

• delete cert8. DB file has not prevented the error

  Out of the blue, I find that I can not access all Web sites except my Homepage(BBC News) on Firefox.
  Message reads "this connection is not approved.
  I can use the browsers Safari and Chrome times without problem.
  I followed the advice of Mozilla to remove cert8. DB folder - have retried several times without success.
  I use Firefox update 40.0.3. and this is the first time I have encountered this problem.

   All advice and -hopefully -a solution will be much appreciated.
  

  Them

  I'm sure that you've read about the verification of the system clock: verification of validity of the certificates are no error in the date, time or time zone, and sometimes allowing to use an Internet time source, computers can introduce errors.

  Assuming that's not the problem... Untrusted connection error page displays a code in parentheses (separated_by_underscore_characters)? Sometimes, you need to expand a section of the technical Details of the page to see the code.

  To provide a specific set of next steps, please let us know the error code (or codes) you get.

  For example, among users of Mac recently, a common code is sec_error_bad_signature and the most common reason for that seems to be the shield of Web of Avast. Web Shield intercepts your navigation and filter, but to filter sites secure, it has "fake" certificates for Firefox. Avast have set Firefox to rely on its false certificates, but which seems to fail on a regular basis.

  To test this theory, try disabling scanning of encrypted sites. I saw these steps in another post (if all goes well, they apply to Mac):

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok

  If that solves the problem, but you want to filter encrypted communication, you need to import the Avast! signature in Firefox Certificate Manager of certificates, References tab.

• Why I can't Facebook more with this new home

  When I don't connect to Facebook, all I get is the screen printing some photos it's a mess

  Hi Joan, have you seen "untrusted connection" errors lately? Sometimes does not load a site style sheets, and therefore the page layout is without style, if the servers providing these stylesheets are unreliable.

  If you get errors of unreliable connection, so we have to help you understand why this problem can be solved. You can see the error page for a code in parentheses (separated_by_underscore_characters). It might be in a section of technical details of the page. Please stick to come back here.

  Here is an example:

  The most common reason for many sites (sec_error_bad_signature) seems to be the shield of Web of Avast. Web Shield intercepts your navigation and filter, but to filter sites secure, it has "fake" certificates for Firefox.

  To test this theory, try disabling scanning of encrypted sites. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok

  If that solves the problem, but you want to filter encrypted communication, you need to import the Avast! signature in Firefox Certificate Manager of certificates, References tab.

  A unique number that affect many windows 10 valuation is that they activated the parental control on their own navigation inadvertently, causing seemingly random crashes. Try to turn off the parental control of Microsoft (or are not part of a family): http://windows.microsoft.com/en-us/windows-10/turn-off-microsoft-family-settings

• Web sites are not displayed correctly

  Facebook, twitter and even mozilla help page is displayed in the display simplified without images. Provides two examples of screenshots. Please answer as soon as possible.

  Unfortunately, the screenshots do not have download. You can start an answer to your own question and use the Browse button under the box attach the image files. Please, cut or blur any sensitive information before downloading. Thank you.

  Since you seem to use Avast, let me explore a possible explanation...

  Did you know the secure certificate errors, for example the sec_error_bad_signature error code? If you have Firefox create an 'exception' to approve a suspicious certificate, concerning only the main server, and if the site gets its style sheets from a server secure, then the page without style.

  The most common reason for the 'sec_error_bad_signature' many sites seems to be the shield of Web of Avast. Web Shield intercepts your navigation and filter, but to filter sites secure, it has "fake" certificates for Firefox. Avast have set Firefox to rely on its false certificates, but which seems to fail on a regular basis.

  To test this theory, try disabling scanning of encrypted sites. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok

  If that solves the problem, but you want to filter encrypted communication, you need to import the Avast! signature in Firefox Certificate Manager of certificates, References tab.

• Almost all attempts to use the results of the internet in the TLS message, that all of these sites cannot be updated

  Mozilla will not let me connect to my own account. Cannot prevent all websites that they are more up-to-date. I see this as a problem of Mozilla.

  Just downloaded Ten Windows and it seemed OK with Firefox and Thunderbird until this problem. Mozilla - call me NOW
  +++ +++ ++++

  If you do not call I give up Firefox and go with Explorer...

  Edit: removed phone # public and robots to spammers. Sorry, but someone here or Mozilla does a on the support of a phone.

  Hi greyfox73plus, the error page usually shows a code in parentheses (separated_with_underscore_characters). Sometimes, you need to develop a technical Details section to find the code. Could you put one you get?

  Here is an example:

  The most common reason for many sites (sec_error_bad_signature) seems to be the shield of Web of Avast. Web Shield intercepts your navigation and filter, but to filter sites secure, it has "fake" certificates for Firefox.

  To test this theory, try disabling scanning of encrypted sites. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok

  If that solves the problem, but you want to filter encrypted communication, you need to import the Avast! signature in Firefox Certificate Manager of certificates, References tab.

• I can get some future Web sites and others do not. When I try to connect to any site, I get this message and cannot connect

  The secure connection failed

  An error occurred during a connection to mail.yahoo.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  The most common reason for the 'sec_error_bad_signature' many sites seems to be the shield of Web of Avast. Web Shield intercepts your navigation and filter, but to filter sites secure, it has "fake" certificates for Firefox. Avast have set Firefox to rely on its false certificates, but which seems to fail on a regular basis.

  To test this theory, try disabling scanning of encrypted sites. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok

  If that solves the problem, but you want to filter encrypted communication, you need to import the Avast! signature in Firefox Certificate Manager of certificates, References tab.

• Cannot connect account MSN (Bing) Firefox (Win10)

  I have the latest version of Firefox and Windows 10. I clear my history and cookies a week and thereafter, this time, I can't connect to my Microsoft Account on Bing as my home page. It gives me an error message of invalid certificate. My computer will also not go into mode 'sleep' now. Related or coincidence?

  The most common reason for the 'sec_error_bad_signature' many sites seems to be the shield of Web of Avast. Web Shield intercepts your navigation and filter, but to filter sites secure, it has "fake" certificates for Firefox. Avast have set Firefox to rely on its false certificates, but which seems to fail on a regular basis.

  To test this theory, try disabling scanning of encrypted sites. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok

  If that solves the problem, but you want to filter encrypted communication, you need to import the Avast! signature in Firefox Certificate Manager of certificates, References tab.

• Where is the Email application in os FF. User Mac OSX 10.10.1 mac mail.

  I installed the encrypted Communication of add-on on my iMac OSX 10.10.1. Apple Mail is my mail-env Kensington track. ball my mouse.

  This combination does not work together. Right click in the textarea has no effect. Searching for information pointed to the Mail app in Firefox OS. But this app is not available.
  

  What should do?
  Thank you
  Jan Geenen

  BONES of Firefox is not the same as the Firefox web browser, which is not an application "mail".

  See if that helps - https://support.mozilla.org/en-US/kb/change-program-used-open-email-links

• My email is hacked I have to delete it and the password

  My email has been hacked. I installed a new account. You need to remove the old one and other relevant details that I must.

  Change of Auditors in an e-mail client would not affect the box mailbox itself, apart from the fact that you will stop making reference to the mailbox.  The hacker will always have control over this mailbox and can still access all personal data resident in it.  If you used to leave a copy of messages on the server, the hacker can see everything that you wrote, including the e-mail addresses of all those who have sent messages.  If the email contains sensitive information, the hacker still has that as well.  If you have kept your contacts online in the mailbox, the hacker has those too.

  If you can still connect to the mailbox through a web browser, you can stop the pirate.  If you wish to continue using the mailbox, simply change the password to something long and a mixture of lower and uppercase, letters, numbers, and special characters.  If there are security issues, change their answers to these questions so, specifying the wrong answers you remember.  For example, if a security is "what city were you born?", answer "Moonbase Alpha" or some other nonsense response and then remember the answers that you used.  Check to make sure none of the secondary addresses have been added to the account or the hacker may be able to access it again.  Make sure that the primary address is always yours.  With this type of approach, you should be able to secure your mailbox again.

  If you do not keep copies of messages on the server, the hacker can't do much use the account because it does not contain a lot of information and abandonment it's a way to fix the problem.  The hacker doesn't have access to any of the data on your PC itself (unless you have some sort of spybot on your PC), so it is not necessary to disinfect local data.

  Such a compromise has become quite common these days and a couple of the reasons are because people 1) access their online resources of networks unprotected and open like those found in cafés Internet, Starbuck, or same McDonald and 2) they do not use SSL for the connection, it does not the service or because they do not realize that they should.  When using an online service such as, for example, Facebook, we should allow the security option in the profile security settings to use "https" all the time or access to the service with https:// instead of http://...  This encrypts communications and your traffic can be sniffed with common tools to steal credentials like Firesheep, a plug-in for the popular browser Firefox.  In an e-mail client, incoming and outgoing servers should also allow (or require) encrypted connections (SSL or TLS) and if they are not, you should never use an e-mail on a public network client.

  Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• vFoglgiht have developed Ldaps?

  vFoglight have LDAPS support?

  my Windows AD is open LDAPS, vFoglight view log application error LDAP,.

  So narrow Windows AD LDAPS, via the LDAP protocol is OK

  vFoglight is suppoirt secure LDAP.

  Setting up a connection encrypted with SSL LDAP

  Use the following instructions if you need to encrypt communication between the administration server and the LDAP server.

  To encrypt communication between the administration server and LDAP:

  1: acquire the certificate for the LDAP server to the administrator .pem format.

  2: import the certificate into the keystore of administration server, \jre\lib\security\cacerts (default password: changeit), with the following command:

  \jre\bin\keytool-import - file - alias ldapsvrcert - keystore - storepass

  Note: If you do not specify the password by using the - storepass, keytool you asked to provide.

  3: in the Panel of navigation, under the dashboard, click Administration > users & security > Directory Services settings.

  4: under LDAP locations, click on change.

  5: specify the URL of the LDAP server in the following format:

  LDAPS://ldap_server_host_name:636

  Note: The LDAP over SSL port number is usually 636. Confirm the correct port with your LDAP server administrator number.

  6: restart the management server.

  Here is the link to the document online:

  http://eDOCS.quest.com/vFoglight/66/doc/core/installation-windowsMysql/Installing_MgmtServer.046.5.php

  HTH,

  -Larry

• Issue of VmGuestNetworkInterface

  Greetings,

  I have the following code:

  do { $vm = Get-VM -Name P4-Test-Clone | Get-View } while($vm.guest.ToolsStatus -ne 'toolsOk')
  $NetworkAdapter = Get-NetworkAdapter -VM P4-Test-Clone
  echo $vm.guest.ToolsStatus
  Set-NetworkAdapter -NetworkAdapter $NetworkAdapter -NetworkName 'VM Network 2501' -StartConnected $true -Connected $true -Confirm:$false 
  echo $vm.guest.ToolsStatus
  $GuestInterface = Get-VMGuestNetworkInterface -VM P4-Test-Clone -HostUser $hu -HostPassword $hp -GuestUser $gu -GuestPassword $gp
  echo $vm.guest.ToolsStatus
  Set-VMGuestNetworkInterface -HostUser $hu -HostPassword $hp -GuestUser $gu -GuestPassword $gp -VMGuestNetworkInterface $GuestInterface -IP 10.25.1.116 -Netmask 255.255.255.0 -Gateway 10.25.1.254
  $vm.guest.ToolsStatus
  

  Who comes around:

  MacAddress: 00:50:56:8e:00:3 c

  WakeOnLanEnabled: true

  NetworkName: Network VM 2501

  Type: Vmxnet3

  ParentId: VirtualMachine-vm-471

  Parent: P4-Test-Clone

  UID: /VIServer = mgmt\ bsvinis@dci-vc1: 443/VirtualMachine = VirtualMac

  Hine-vm-471/NetworkAdapter = 4000.

  ConnectionState: Connected: true

  ExtensionData: VMware.Vim.VirtualVmxnet3

  ID: VirtualMachine-vm-471/4000

  Name: Network adapter 1

  Tools Ok

  Get-VMGuestNetworkInterface: Get-VMGuestNetworkInterfac 02/02/2011-18:16:31

  e during operation 'wait to connect to the VMware guest tools on

  VM ' P4-Test-Clone "the following error occurred: ' pending timeout error

  for VMware Tools to start in the prompt '

  C:\Users\bsvinis\Desktop\test.ps1:9 tank: 46

  + $GuestInterface = get-VMGuestNetworkInterface < < < < VM - P4-Test-Clone - HostUs

  ER of the roots HostPassword - Cisco12345 - GuestUser, administrator - GuestPassword Cisco1

  2345

  + CategoryInfo: OperationTimeout: (:)) [Get-VMGuestNetworkInterfa)

  This], VimException

  + FullyQualifiedErrorId: Client20_VmGuestServiceImpl_VixWaitForJob_VixErr

  Gold, VMware.VimAutomation.ViCore.cmdlets.Commands.GetVmGuestNetworkInterface

  Tools Ok

  Game-VMGuestNetworkInterface: unable to bind to the parameter argument ' VmGuestNetwork

  Interface "because it is null.

  C:\Users\bsvinis\Desktop\test.ps1:11 tank: 144

  + Set-VMGuestNetworkInterface - HostUser - HostPassword Cisco12345 - root, GuestUse

  r administrator - GuestPassword Cisco12345 - VMGuestNetworkInterface < < < < $Guest

  Interface IP - 10.25.1.116 - Netmask 255.255.255.0 - Gateway 10.25.1.254

  + CategoryInfo: InvalidData: (:)) [game-VMGuestNetworkInterface])

  ParameterBindingValidationException

  + FullyQualifiedErrorId: ParameterArgumentValidationErrorNullNotAllowed, V

  Mware.VimAutomation.ViCore.Cmdlets.Commands.SetVmGuestNetworkInterface

  toolsOk

  I've highlighted the areas that I have a question about. Mainly, I'll have the script to clone the virtual machine, wait until the status of tools is correct and then try to configure the network. However, it seems that VMGuestNetworkInterface is still having a problem connecting to the tools on the client. If I wait a bit more (30-60 seconds), then the command works fine.

  Any help is appreciated more.

  The ToolsStatus property is not a good point to determine if the operating system in your guest is completely started.

  It only tells you that VMware Tools service has been started in the guest OS.

  The Get-VMGuestNetworkInterface cmdlet is based on a BAT file (for Windows clients) that uses the ipconfig command (and sometimes the command netsh) command to retrieve information about the network known in the s guest OS maps. See the file GetVmGuestNetworkInterface_WindowsGuest.bat in the folder PowerCLI\Scripts of vSphere.

  The BAT file is passed to guest with the VIX API.

  The first message you see seems to indicate that this communication through VIX to the guest operating system is not yet established.

  The 2nd message, the Set-VMGuestNetworkInterface cmdlet, is the consequence of the failure of the Get-VMGuestNetworkInterface cmdlet. Since there is no, he returned all the data and therefore $GuestInterface is $null.

  The simplest solution is to place a line "sleep 60' before the Get-VMGuestNetworkInterface ".

  Another solution may be to use WMI to query the operating system on the guest.

  But since you configure the network adapters on the client that there is no option for what you try to do.

• I would like to use with Firefox Hello screen sharing. All communication is encrypted?

  I have found no explanation on the protocols used in the background.

  Thanks for your help.

  Take a look at this page: Hello Firefox Privacy Notice.

  When you make calls, the data below is sent to Mozilla to establish the call. Once connected, your communications are encrypted.

  Hello of Firefox is carried out in collaboration with TokBo > see their pages personal and help, for example this article: what kind of security features being established OpenTok?

• Encrypted L3 Communications between the TOWER and WLC?

  Hi all

  I work with a client who wants to put the towers away to their WLC (a 4402). The problem is that communications between the TOWER and WLC must be secured, even through their private Wan! I have a few questions that result, if someone is able to help you;

  1. I can't know if and what method of encryption is (is it AES etc.?) used on connections between towers and the WLC and what are the steps?
     1. The terminology can be a problem here, it's not a wireless mesh, just classic LAP for WLC
  2. EXTENSIVE customer network is already encrypted (IPSec VPN via VPLS) in parts - what is the consequence of execution of AP<-->WLC with end to end (if possible) on a network encryption EXTENDED with IPSec, i.e. double encryption?

  Strange but true - pointers will be greatly appreciated... Phil.C

  With a controller of the 4400 series, the control traffic between the AP and the regulator is already encrypted AES.  The user traffic is not encrypted.  If you use a 5508 controller all traffic between the AP and the controller is encrypted AES.

  For what is running the traffic through a VPN, it should work.  The issue I see with this is with the MTU in general.  The controller will drop all packets with a payload of less than 32bytes data.  According to the MTU over the VPN I've seen packets getting fragmented and it is a question.  If you use one of the versions CAPWAP (5.2 or newer) discovery dynamic MTU is part of the Protocol and this MTU problem does not really exist.

• What encryption (if any) is used by Apple bluetooth Magic keyboard (MLA22LL/A) when communicating with MacBook Pro?

  I am considering buying magical Keyboard wireless Apple (MLA22LL/A). What (if any) encryption is used by this keyboard blue-tooth when it communicates with the Mac Book Pro?

  I have a Mac Book Pro running OS X El Capitan.

  The only real encryption it offers is the fact that it pairs with your computer based on a code that you see only on your computer.     There are some wireless keyboards with much more sophisticated cipher such as AES.   Interestingly enough Apple uses AES encryption for its images of which are encrypted disk utility.

  When you use a Windows keyboard, you won't get the same start strokes keyboard sequence, and the implementation of the Alt key and the windows are in reverse order of the Mac keyboard functionality.  Many start sequence shortcuts only work on the wired Apple compatible keyboards.   Logitech and compatible third-party Apple MacAlly keyboards.  Microsoft for its own keyboards makes a pilot who will the placement of the button Alt and Windows in the right order.

  ALT = key Option from Apple.

  Windows = control of Apple key.