Encrypted in 6120XP ports

Similar Questions

• Audit of FI Port connection?

  What is the best way to determine what direction South (Module e/s) and ports to the North / interfaces (Nexus 5 K, MDS 9000) are connected to the ports that are FI, without performing a physical inventory?

  Something to bring together similar to the:

  FAB HAS

  2104XP Port 1 / x <> 6120XP Port 1 / x

  6210XP Port 1 / x <> Eth1 5010 / x

  6120XP CF Port 2 / x <> MDS91xx fc1 / x

  etc...

  Thank you

  Dan

  http://ucsguru.com/2012/05/18/understanding-UCS-VIF-paths/

  Fex network port
  2104XP/o Modules have also 4 Network Interfaces (NIFs / rising Fex) linking to upstream interconnection fabric.

  

  Figure 5

• Encryption: "Apply crypto map interface.

  East - the best forum to discuss encryption?

  I want to implement a single aes encryption between an ISDN Bri1/0 port on a 2611xm and a 2811.

  I want to encrypt everything except telnet on the ISDN link between these routers. I want to telent between routers just in case the encryption locks himself. This is my requirement of customers.

  Question #1: Should I contact the card encryption the Ethernet port (as I have seen in many examples) or on the ISDN connection?

  Question #2: If I ask the encryption card to the ISDN connection, should I do the encryption the BRI port card or the dialer?

  Question #3: Assuming that both routers and all segments use the 10.0.0.0 network and are not connected to what anyone else, the following access list would work?

  access list 110

  deny ip any eq telnet

  allow an ip

  Thank you

  Mark

  Hi Mark,

  Apply the card encryption to your outgoing interface (Dialer)

  You probably will lock the router by putting

  an ip address allowed any one in your crypto access list

  you have probably even to add telnet deny entry in your access list if you are ready to open your session to the router

  I suggest you

  extended to remote IP access list

  deny ip any eq telnet

  ip licensing 10.0.1.0 0.0.0.255 10.0.2.0 0.0.0.255

  The remote site would have a mirror

  social-seat extended IP access list

  deny ip any eq telnet

  IP 10.0.2.0 allow 0.0.0.255 10.0.1.0 0.0.0.255

• Wireless HP 6500 not print / scan to Macbook

  There are several discussions about Mac and 6500's. I tried everything I think, but who knows if the order is important?

  I rubbed, reset, restarted and even cried a little looking for the magic to get a 6500 wireless print and scan from / to a MacBook Pro OS X 10.6.8 fully patched.

  I rubbed the HP software. I reset my router. I did the SSID lowercase. The printer has a dedicated IP address. I checked that the printer did not appear in the list of standard drivers OS X 10.6. I was unable to connect via wireless installation of HP by IP/connection program as it could not detect it. I've been able to connect to the printer via IP page and could he ping, but Setup HP (selection by IP) would not see it. I then connected via USB to get the drivers installed and configured.

  Once it was installed, it does see the printer via USB but not wireless. I tried to print via USB and it did not work. The error is that the network host 'xxx.xxx.xxx.xxx' is busy. I tried using the wireless and got the same error.

  The printer works from IBM (XP), Dell (XP) and laptop computers wireless HP (W7) and cable 3 PC (XP, XP, W7).

  Looking forward to this ad nauseum troubleshooting!

  Thank you.

  You can speak to netgear,

  Replace the WPA 128bits encryption

  Open port 9100 TCP and UDP

  Make sure that the multicast filter is enabled

  Have them check for any firewall that can be activated.

  It seems that we just a matter of simple port is blocked, so I would have them check first port 9100.

• Office live mail can't connect to Palm Pre please help!

  My email is through office live, where I created my own domain. org. For hours, I tried all of the solutions that have been available online. I called palm pre support and more then I knew the right person trying to help me. No one solution works even Microsoft sent me for palm for an answer. While office live's hotmail, I had to open a hotmail account and pass my email to my .org account to the new account hotmail to get my messages and it creates a new set of problems... How a smartphone does not work if it cannot be used for businesses? I tried to enter the settings for the various ports and inbound and outbound ESMTP, I went to the sprint with their individual store top tech and he tried for three hours before telling me to set up a hotmail account to forward my mail. This is not a solution and causes logistical problems for me and use hotmail is not professional. Help, please!

  Thank you

  Here are the settings. You can thank me later.

  type of mail - POP

  Incoming mail serve - pop3.live.com

  user name - your connection as if you were on the officelive website.

  password - password as if you were on the officelive website.

  -SSL encryption

  # PORT - 995

  outgoing mail server - smtp.live.com

  use sign - on

  Incoming mail serve - pop3.live.com

  user name - your connection as if you were on the officelive website.

  password - password as if you were on the officelive website.

  encryption - STL

  port - 587

• BUG: Hotmail on Pre records

  There is no on the Meadow for hotmail junk folder. It is for my other accounts.

  Unfortunately, I have my mail contacts only the value, and so I need to check my Junk folder.

  All I can do to fix this? or do I have to wait for an update!

  clockworkjeremy wrote:

  Type: IMAP

  Entrants:

  Server: in.izymail.com

  Username/PW: [email protected]/actual password hotmail

  Encryption: no

  Port: 110

  Outbound:

  Server: out.izymail.com

  Username/PW: [email protected]/actual password hotmail

  Encryption: no

  Port: 587

  The standard port for IMAP incoming mail is 143. You can override 110 to 143?

  Make sure that you enable authentication (also known as ESMTP) so you can send outgoing mail.

• Operation timed out. Cancellation...

  I've had this problem now for 3 versions of DW, more recently, with CS5.5x

  I have changed the settings and increased the Prefs/Site: FTP timeout to 180 seconds. (Verified) 180 seconds via FTP transfer options.

  I use:

  • FTP over SSL/TLS (explicit encryption);
  • port 2121 (on the advice of the host);
  • Authentication (none) - could not get a connection.
  • Passive FTP mode
  • FTP performance optimization is checked.

  I use DW CS5.5 [11.5 construct 5344] on a Mac running 10.6.8.

  I am able to download successfully via FTP, using the FTP Transmit (v 4.1.6) program, so there is something in DW himself that causes this problem.

  Any ideas out there?  I'm going crazy!  My host is unable to understand the question either, and since all the works in the show, it must be a matter of DW.

  Thank you

  Peter

  I am happy to say that my host has been able to solve the problem.

  In case it is beneficial for others, here is their explanation for what was wrong:

  "Our servers use iptables for their firewalls, this is not automatically pick the port assigned to a passive FTP connection when the connection is encrypted." The port range configured on the FTP server for passive mode data channel has not exactly match the range of ports that was explicitly open in the firewall for that purpose, which gives only a 1 in 3 chance to get a passive FTP connection encrypted work. »

• Encryption of port

  Is it possible, using the OAS, to encrypt the data using a specific port and not others? I have a listener on port 1521 working but I want it to work on 15443 too but encrypted, is it posible?

  StressedTux wrote:

  Do you know what would happen to windows by ssh tunnelling clients? I guess that they will not be able to connect if they use a program such as the right of access (via the conection encrypt)?

  PuTTY supports ssh tunnels and is available for Windows. Here, developers use which widely enough for Oracle ssh tunnels I have install which runs through networks and allows them access a remote RAC.

  It also depends on how to set up a tunnel. There are security considerations. Tunnelling in itself is how quite simple.

  One thing to keep in mind however that moving the traffic network application on registered ports for the application and incorporate as ssh traffic. This complicates administration and network management. So the pros and cons must be examined and considered alternatives too.

  But for bridge and gateway applications basic network objectives, this is one more easy solutions to create and implement in a robust way.

• My Mac is hacked! Encryption help please!

  My Mac Pro is hacked, and this is confirmed by the engineers. Because the Mail app and even online ISP mail did not work if good PSI hunted hackers. I found files fragmented on 240 and 480 GB Intel SSD drives into the slots of the T2 drive: files named "sparse disk image...". ' and ' package of rare records...' appeared in the root of the readers. I could easily remove them. But I never put there. At the same time, Apple Mail app kept resetting ports 993/587 (course) to ports 143/25 (very insecure). Post font size 23pt appeared, ads corrupted font, file extensions book would not appear or would disappear, etc, etc, etc. The internet connection was bad too, so I called my ISP. ISP found twelve 12 computers in windows using various applications on my system. None of the computers used found languages where I live. Pirates. I also have an airport with a cap of 2 TB, and it is probably also diverted. Nothing in my system is encrypted. I just use firewall, even if it does not get somehow.

  Advise main suggested Apple should I encrypt my records. But these fragmented files were already there. Which indicates that someone somewhere on Earth was already encrypt files on my system. The adviser said fragmented files are a pretty good indication that its time to get more proactive. If my plan is to use disk utility to wipe my internal drive OS, OS X Extended (journaled encrypted). Then install OS X on the disc encrypted EAS - 256 bit.

  For those who have experience of encryption Mac

  1.) encrypt and install OS X on the encrypted drive wise?

  2.) how to clear all present airport Time Capsule content, encrypt Time Capsule and use it with my encrypted system?

  3.) how to encrypt external disks and use them with encrypted Time Capsule and encrypted internal drive?

  (4.) how to manually copy files from encrypted disks (mainly SSD external drives) of other backup disks which are normally cold (disconnected) for monthly backups of cold. "

  5.) monthly cold copies remain unencrypted?

  I worked with Mac since the 1980s. You can ignore it, but here are my thoughts: encrypt just the disk won't do much. I am surprised that the Apple engineer suggested this. If your Mac is compromised (depending on the ISP see Windows for access to the you that seems reasonable) the things MOST IMPORTANT to do is eliminate the hack code. If you encrypt the disk with the hack still there it is more likely will always have access to the data. Before going that all keep in mind that you probably allowed the hack in installation of the software on the web or by opening an attachment with the hack. So everything you try to remember what helped you ensure that you wouldn't do it again.

  You should consult your application package to see if there is something that you don't recognize or recently installed before the problem and remove before you try anything because it is possible the cut is integrated into an application. Remember that almost all hacks are hidden in the system and not easily seen so you probably won't find it. My approach is to install a charge/clean OS X, then copy your applications and your data.

  There are many approaches to this problem, but here's what I think, this is the simplest approach IF you have access to a second mac AND hack code doesn't do not part of one of your applications.  You said not what type of Mac you have or the system or if you have access to other Macs. My proposal would be based on that. Since you are in a jam here are a few options:

  If you have more than one Mac and an external hard drive:

  1. start the mac infected in target mode: restart and as soon as it chimes hold "T".

  2 connect the Mac, because I know you can't tell how. You can google it.

  3 format an external hard drive to use as a target of installation for El Capitan.

  4 download and install El Capitan on the Apple App store and install it on the external drive.

  5. after starting upwards, when asked if you want to copy applications and data to another Mac say Yes and let it copy the applications and data from the infected Mac internal drive.

  6. Once installation is complete it should start from the outside, test your system for ensure that everything works, you have all your dataand see if the problems are eliminated.

  7. If it's good, when it is started from the outside:

  8 download Super Duper or carbon copy. (I use SD).

  9. use disk utility in the folder utilities to clear the internal drive.

  10. copy your external drive to the internal drive, it will be deleted.

  11. when the copy is complete, stop the Mac and disconnect the external hard drive.

  12. start the Mac, go to Preferences-> floppy boot, then selected your internal drive system, she might want to restart. This step is optional, but if the boots aren't made can be more slow that the Mac external drive first.

  If you have access to an external hard drive:

  Remember that although it would probably be fine, there is a slight possibility that this can infect a connected drive, this is the case, you must use multiple macs above approach. But it's something you can try if you don't have a second mac.

  * Skip steps 1-2 above and do the rest on the infected mac.

  If you do not have an external drive, you can use a large USB but it will be much slower. Good luck, I hope that others will come to the top with options. But it's what I would do.

• Store using 3 Canvio external to internal - data seems to be encrypted

  Hey,.

  I bought a put ext hdd my data on it and the usb controller is gone-. -.
  Now, I want to get my retrospective data, obtained the drive hard toshiba from its holster and put it on a sata internal but now I had a problem.

  The data appear to be encrypted, windows shows me 3 partitions where 1 is gross and others have never served...
  could someone give me a tip how to get my data back or at least what program encrypted disk?

  Hello

  You intervene on the Canvio Stor.E 3.5 3 right of TB?
  http://www.Toshiba.EU/hard-drives/desktop/store-Canvio/hdwc130ek3j1/

  There was NTI Backup Now EZ preinstalled software that allowed you to do a backup and restore of your HARD drive.
  http://APS2.toshiba-tro.de/KB0/OPT0B03290000R01.htm
  But I can't imagine that the date was encrypted by default.

  Have you tried to connect the HARD drive to another USB-SATA controller and to connect this unit to s for computer laptop USB port?

• Portege 2010 PP201E - unable to connect to the router encrypted with WPA

  Hello

  I just bought a Toshiba (? 2002) Portégé 2010: PIII 866 MHz/XP... Part number: PP201E-00GPP-EN. support for the Wi - fi network: 802. 11 b

  When I try to connect to the internet using my sky router (WPA / PSK) my Toshiba does not connect because it asks for the WEP.
  I tried to change it on Assistant, but that's it or turn it off.

  I have only one option is to change the router WEP, but I heard it is an old and easily hackable, technology
  In any case, I don't want to mess with my router, another PC wireless and my playstation.
  I looked on update of the driver toshiba but that did not work.

  Does anyone know if there is a updated for my lapptop driver or do I have to buy a USB product?

  Thanking you

  Hello

  Maybe the internal WLan card does not support the newer WPA encryption but only the WEP key.

  The fact is that encryption is hardware related. This means that an update of the driver will not help you. If the hardware does not support WPA, then you need to replace the WLan card or buy a USB WiFi dongle that supports WPA.

  I have thin external USB WLAN key is the easiest solution

• Still 2 - encryption boot problem

  I encrypted my still 2 8 "with the program called"Diskcryptor', only the C: partition, but not the 'copy of windows"(or something like that) partition.

  Normally on my desk there is a 'beep' then my motherboard/BIOS map screen, then it asks me the password, but the yet 2 he did not instead there just starts starting this toshiba and said that something is wrong. (of course software toshiba can't access the windows partition because it is not mounted)

  I have been troubleshooting after this long toshiba repair the thing, there are a lot of things that I try.
  I wanted to just plug in the usb to my pc when I installed the diskcryptor program and he should be able to be mounted as my flashdrives do, but my pc do not at all see the yet!
  (Plus possibly the reminder cannot use usb, maybe the usb driver is not loaded)

  There is also a cmd with I think should help me somehow, diskcryptor have some commands to decipher and that but it does not recognize the command.

  I also try to activate usb with cmd, but it does not work either.
  I think I must jump boot toshiba with this repair and what prevents me to enter the password.

  Help!

  Hello

  The 3rd tool third called Diskcryptor isn't known to me and I'm not quite sure how this tool would affect the start of partition encrypted C procedure but according to the site Web of the program, the tool supports the own bootloader and its necessary to insert a password (authentication pre-seed) in order to boot the OS from m.

  In all cases of doubt regarding the use of this software, I recommend you to check the description of the software and the recommendations of use available on the site for manufacturer of software.

  With regard to the Encore 2 USB functionality:
  The Encore 2 acts as a host through the micro-USB port. This means that the tablet can communicate with other devices s USB client as USB flash key, mouse or keyboard.

  To do this, you must use a cable adapter USB On-The-Go (OTG).

• Encrypted time machine will not go up

  Last night I "removed" my hard drive (a drive of my book), for some reason any instead of my usual path. I wanted to start over and encrypt my backup disk. I really didn't do this way. Now my drive will not mount! I've tried everything! It shows that if I open my drive utiliity. It shows both the physical disk and the logic of the os x extended volumes called 'time machine', however, that ghost. It cannot mount it through disk utility. If I try to run the first aid, the ghost volume disappears. I also tried these steps with the WD my book nothing helps utilities. I also tried to go through the restore and recovery mode, but it's just a turning wheel without end for hours and hours. Basically, it seems as if she is already encrypted. His is as if he started the process, because I chose, but he removed. But, he asks me the password during restart. A few tips on how to get back? I tried a direct contact with the computer and drive to the wall. I also tried different ports. As a last resort, I tried to erase the disc, but it also doesn't let me do. He said it is "impossible to delete the basic storage logical volume group."

  I read a few other threads here and so far, none have allowed... so I post separate in the hope of a miracle! The drive is new.

  No one is willing to answer to this?

  Of course it is a problem because of the "suppression" of the player. Because I just went out and bought a new drive. The same. Of course recognized the first and as soon as I chose encrypted and the process has started. The drive was missing and it gives the same message.

• Kernel panic, but why? You can encrypt the report?

  Dear community,

  I face some trouble with my macbook 2014 mid pro since the installation of el capitan. Generally, the problem starts when the mac is in mode 'sleep'. Then I turn it on and want, for example on a site. It's like when I do and the page begins to accumulate, the mac restarts. But I am not able to determine what software causes this problem, as it appears irregular and with different programs, for example, Skype, Safari, etc. of Crome. It occurs as a few seconds after that I woke up the Mac - not during normal operation.

  I did some research online to find out what is happening. I guess its what Apple calls a "kernel panic" but I'm not able to identify how to solve this problem. As you can imagine, I would appreciate not to implement the entire system again. My plan was now to uninstall the installed step by step software, check which could cause these disorders. Do you think it would be a good approach?

  I have attached the problem report. Even though I am somewhat aware of COMPUTER stuff - I'm not able to encrypt this report at all. Maybe you can help me o find the root cause?

  Thank you very much

  Robert

  Anonymous UUID: EDB50686-F422-82F2-80E3-F71A70D85598

  Fri. Nov 27 13:10:36 2015

  Panic report *.

  panic (cpu 6 0xffffff80159d6bba appellant): Kernel trap at 0xffffff7f960f0263, type 14 = page fault, registers:

  CR0: 0X000000008001003B, CR2: 0 X 0000000000000000, CR3: 0X00000003327C10EF CR4: 0X00000000001627E0

  RAX: 0 X 0000000000000000, RBX: 0XFFFFFF80350F4800 RCX: 0 X 0000000000000000, RDX: 0 X 0000000000000000

  RER: 0XFFFFFF81FE7D3A60, RBP: 0XFFFFFF81FE7D3A70, IHR: 0 X 0000000000000107, RDI: 0XFFFFFF80350F4800

  R8: 0 X 0000000000000000, R9: 0 X 0000000000000000 R10: 0 X 0000000000000000, R11: 0000000000000000 0 X

  A12: 0 X 0000000000000107, R13: 0XFFFFFF8015E92A90, R14: 0 X 0000000000000107, A15: 0 X 0000000000000000

  RFL: 0 X 0000000000010246, RIP: 0XFFFFFF7F960F0263, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  CR2 error: 0 x 0000000000000000, error code: 0 x 0000000000000000, CPU error: 0 x 6, PL: 0

  Backtrace (CPU 6), frame: return address

  0xffffff81fe7d36f0: 0xffffff80158e5307

  0xffffff81fe7d3770: 0xffffff80159d6bba

  0xffffff81fe7d3950: 0xffffff80159f4313

  0xffffff81fe7d3970: 0xffffff7f960f0263

  0xffffff81fe7d3a70: 0xffffff8015eb59be

  0xffffff81fe7d3ab0: 0xffffff8015e91aef

  0xffffff81fe7d3b30: 0xffffff8015e8e157

  0xffffff81fe7d3b70: 0xffffff8015e910fc

  0xffffff81fe7d3bf0: 0xffffff7f96679b5d

  0xffffff81fe7d3c20: 0xffffff8015eaf1c1

  0xffffff81fe7d3c50: 0xffffff8015eaf3a5

  0xffffff81fe7d3c90: 0xffffff8015e48868

  0xffffff81fe7d3cd0: 0xffffff8015e500d1

  0xffffff81fe7d3d50: 0xffffff8015e62674

  0xffffff81fe7d3dd0: 0xffffff801592f556

  0xffffff81fe7d3e30: 0xffffff80158e9aa3

  0xffffff81fe7d3e60: 0xffffff80158cd478

  0xffffff81fe7d3ea0: 0xffffff80158dcfd5

  0xffffff81fe7d3f10: 0xffffff80159c13aa

  0xffffff81fe7d3fb0: 0xffffff80159f4b36

  Extensions of core in backtrace:

  com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [69F7C794-75F7-396C-9169-8 C F2FDD29037]@0xffffff7f960ea000-> 0xffffff7f96114fff

  com.apple.iokit.IOUSBMassStorageDriver (1.0) [E52C8824-B604-3741-997E-AE4089B296F 1]@0xffffff7f96670000-> 0xffffff7f9669cfff

  dependency: com.apple.iokit.IOUSBHostFamily (1.0.1) [CB073B0F-F3E0-37BD-8091-390367BEDAB0] @0 x ffffff7f965ff000

  dependency: ffff7f9604d000 @0xff com.apple.iokit.IOStorageFamily (2.1) [956BA336-5C0A-37E9-B395-538D1BD95AC0]

  dependency: com.apple.iokit.IOSCSIArchitectureModelFamily (3.7.7) [69F7C794-75F7-396C-9169-8 C F2FDD29037]@0xffffff7f960ea000

  Corresponding to the current thread BSD process name: kextunload

  Mac OS version:

  15B 42

  Kernel version:

  Darwin Kernel Version 15.0.0: Sat Sep 19 15:53:46 PDT 2015; root:XNU-3247.10.11~1/RELEASE_X86_64

  Kernel UUID: AB5FC1B4-12E7-311E-8E6F-9023985D8C1D

  Slide kernel: 0 x 0000000015600000

  Text of core base: 0xffffff8015800000

  Text __HIB base: 0xffffff8015700000

  Name of system model: MacBookPro11, 2 (Mac-3CBD00234E554E41)

  Availability of the system in nanoseconds: 3278899959193

  last load kext to 3268969393368: com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1 (addr 0xffffff7f98340000 size 24576)

  Finally unloaded kext to 2685447599648: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f98327000 size 32768)

  kexts responsible:

  com McAfee.SFKext 1

  com McAfee.kext.AppProtection 1.1.0d1

  com McAfee.AVKext 1

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.driver.AudioAUUC 1.70

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AGPM 110.20.21

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.ApplePlatformEnabler 2.5.1d0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleHDA 272.50.31

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.2f1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleIntelHD5000Graphics 10.1.0

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.2f1

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleBacklight 170.8.1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleCameraInterface 5.41.0

  com.apple.driver.AppleIntelFramebufferAzul 10.1.0

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 37

  com.apple.iokit.IOAHCIBlockStorage 2.8.0

  3.1.5 com.apple.driver.AppleAHCIPort

  com.apple.driver.AirPort.Brcm4360 1010.14.1a4

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.iokit.IOUSBMassStorageClass 4.0.0

  com.apple.driver.AppleXsanScheme 3

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 272.50.31

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOSurface 108.0.1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.2f1

  com.apple.iokit.IOBluetoothFamily 4.4.2f1

  com.apple.driver.AppleHDAController 272.50.31

  com.apple.iokit.IOHDAFamily 272.50.31

  com.apple.iokit.IOAudioFamily 204,1

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleGraphicsControl 3.11.33b1

  com.apple.AppleGraphicsDeviceControl 3.11.33b1

  com.apple.iokit.IOAcceleratorFamily2 203.10

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleUSBMultitouch 250.4

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.CoreStorage 517

  com.apple.iokit.IOAHCIFamily 2.8.0

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.2

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.2

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.0.6

  1101.24 com.apple.iokit.IO80211Family

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 415

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: MacBookPro11 2, MBP112.0138.B16 of BootROM, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, MSC 2.18f15

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.21.94.29.1a4)

  Bluetooth: Version 4.4.2f1 16391, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en0

  Serial ATA Device: APPLE SM0256F, 251 GB SSD

  USB device: USB 3.0 Bus

  USB Device: Card reader

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  Bus crush: MacBook Pro, Apple Inc., 17.1

  com McAfee.SFKext 1

  com McAfee.kext.AppProtection 1.1.0d1

  com McAfee.AVKext 1

  Remove this product

• How to restrict the access of the user to hardware ports?

  Hi all

  As the title suggests, I would like to deny access to normal users to ports such as series, parallel, and USB storage.

  I need to access to the administrator.

  Thanks in advance,
  M

  Group Policy. http://support.Microsoft.com/kb/555324

  I would not disturb that, unless block you also all kinds of internet connectivity, ban installs them, access to records system, the bios password, remove completely the usb drivers, block the visibility of the post, disable usb on motherboard, disable uefi, assign admin security locks, network and start of recovery and encrypt hard drives (bitlocker or material) your choice).

  At this time, there are chances that you shouldn't provide a computer at all. Best policy is good data access governance.