Audit of FI Port connection?

Similar Questions

• HP ENVY on the dv6 hdmi port connect to the graphics card or onboard video?

  HP ENVY on the dv6 hdmi port connect to the graphics card or onboard video?

  Thank you!

  Hello:

  It is part of the audio HDMI graphics cards.

  Normally the Intel HD graphics card manages audio HDMI - even on Intel processors with AMD switchable graphics card models.

• Can I use the SATA port connected to an optical drive to plug in a hard drive?

  I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?

  Thanks, CHemming

  CHemming,

  I've not seen UEIF support in the existing BIOS.

  If your demand on a 3T led, re - consider a maximum of 2 T.

  If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.

  The cage of your system hard disk will support 3 hard disks. Manual upgrade service

  All you need are the SATA data and power cables. Your Board has 4 SATA data ports.

  When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.

• On the PXI-8106 serial port connection problem

  Currently, I am trying to connect to the serial port on the PXI-8106 via RS232 module. However, when I try to run the Test VI opened for COM1 MAX (PXI Remote) running on a PC, I received an error like below:

  Returns the status code: 0xBFFF00A8

  Name of the State: VI_ERROR_NPERMISSION

  Access to the resource or the remote machine is denied. This is due to the lack of sufficient privileges for the current user or the machine.

  Right now I'm just a just loopback test to ensure that the interface for device is working before you start my labview code. I'm not sure what the problem is exactly, if it has to do with the PXI or PC. Could you please suggest a few solutions to this topic?

  Thank you.

  I managed to understand. It did not work on the right platform.

• Channel ports (connection linked to the North) and uplink interface (private storage switch)

  Hello

  What will be the best configuration if I connect 2ports north bound connection and has been applied to the port channel. and I go to configuration 2ports uplink for storage (private switch) interface. All cisco switches.

  2 x 2104XP IOM

  2 x FI 6120XP

  Thank you.

  Dexter

  Hi Dexter,

  Since you will have two / several switches uplink to which you will have an Ethernet to the North, a what you will have to configure is the layer 2 disjoint.

  You must be on any version 2.0 to configure that.

  Here are a few documents to help you with the details:

  http://www.Cisco.com/en/us/solutions/collateral/ns340/ns517/ns224/ns944/white_paper_c11-692008.html

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_010101.html

  Thank you!

  . / Afonso

• Switch ports connected with cross cable on the same switch...

  Hi experts,

  Just got a doubt.

  If both a stand-alone switch ports are connected by a crossover cable, how will be the stp of attitude toward this scenario...

  Thank you

  Arun

  Hi arun,

  As we all know the switches use according to criteria of application PLEASE:

  (1) to root the lowest BID

  (2) a low-cost path to the bridge root

  (3) OFFERED the lowest sender

  (4) minimum port priority

  (5) the lowest port id.

  So in your senario until number 4 allvalues will be equal and there will be a match tie. So for port breakage id will be used and the port with the higher port number will be blocked and low port id will be in a State of fwding.

  Example:

  If you've been through e1/1 and e1/2 cable on the same switch then 1/1 b in condition of fwding all-in-1/2 will b in the blocking state.

  HTH,

  Kind regards

  Shri :)

• A firewire port connectable to a HP G60 - 243CL?

  HP G60 - 243 CL, Vista 32-bit, is possible to connect a Firewire camcorder to this computer?

  Hello

  Based on this, your machine lacks any firewire port. It has no Expresscard slot therefore the single adapter, you can use is USB to Firewire like this:

  http://www.YouTube.com/watch?v=3Gy445vHV9c

  Kind regards.

• Java USB serial port connections

  I was not able to open a serial port usb using "comm: / dev/ttyUSB0 '. BaudRate = 9600' connection uri. Pouvez USB serial ports available through java?

  Hello!

  What version of Java are you using ("Ai2" or "ai2 last developer version ')? In the latter case, you would not be able to open the serial port using Connector.open.

  In case if it is just ai2 it should be possible. An adjustment to the installation, you should do, however. In the file jwc_properties.ini please change the property deviceaccess.uart.prefix of/dev/ttyAMA/dev/ttyUSB (Please note that there is no '0')

  Kind regards

  Andrey

• Question of vCO Port connecting to vCenter

  Hi all

  I have a problem that I hope can be easily solved. I'm pretty sure I know what the question is, just not how to correct it. When I created vCO to connect to vCenter I get the error "Exception," org.apache.http.conn.HttpHostConnectException: connection to http://vcenter.domain.com:80 denied ' "» What I know about the environment, vCenter here is actually using port 8080 for http connections. I can't change this behavior in vCO so far. Here are two screenshots for configuration and the error itself:

  

  

  No way to change the port vCO tries to use on the side of http, or just something that I'm missing (seems likely )?

  Thank you!

  ~ Brandishes

  jaytindel,

  Apparently I completely missed this all the time, while I was completely up to date with the generation which implement a 'solution' to this question, there is always a workaround solution that must be followed. A VMware support engineer guided me to a KB and using the solution of creating a workflow to add the vCenter Server works in fact for me. This is the KB:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2042461

  Let me know if you encounter any problems with it.

  ~ Brandishes

• Port connectivity problem

  When connecting Essbase with ODI...

  Firewall has been blocked for the port of 1423, then I unlocked using our admin N/W team, verified using telnet to port 1423 connects, but

  When tried to connect with odi essbase uses port 1423, topology dataserver and reverse engineer the model created, but his error showing:

  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: error occurred while retrieving the tables of Essabse. Error message: could not open the selection of members. Essbase Error (1290001): network error [10061]: unable to connect to [144.76.187.29:32769].  The client has timed out waiting to connect to the server Essbase using the TCP/IP protocol.  Check the network connections. Also, make sure that the values for server and Port are correct

  I don't know how 32769 came...

  Here are more details about it:

  1 hyperion Essbase Agent uses port number 1423.
  2 hyperion Essbase Esssvr processes using port 32768 by 33768 numbers.
  Each application process uses two ports in the range.

  The first port (e.g. 32768) is used for communication between the client and the server.

  The second way (e.g. 32769) is used for communications between the server and the agent. As the agent and the server generally operate on the same computer, the communication between them is never going beyond the local computer. In this scenario, it is acceptable to have a Firewall closes this second application port.

  Note: The "Server" is the ESSSVR process, on which the application runs.  Essbase.exe is the agent

  Kind regards

  Santy.

• Disabling paths to migrate all storage CF specified on HBA port connections

  Hello

  Do any PowerCLI guru knows a way to run a script to disable all the paths to a FC hba card port specified? I need to move all my storage to 1 port on my HBA to allow me to remove one of my storage switches and by VC is very slow

  Gregg

  I had a quick look and I suspect that the port WWN is the best way to select the paths that are connected to a specific port.

  The script becomes something like that

  $tgtHBA = "vmhba1" $tgtPortWWN = "5766023041194672011" Get-VMHost | Get-ScsiLun -LunType disk | where {$_.RuntimeName.Contains($tgtHBA)} | ` Get-ScsiLunPath | where {$_.Extensiondata.Transport.PortWorldWideName -eq $tgtPortWWN} | ` Set-ScsiLunPath -Active:$false
  

  To get an overview of the host, the HBA, the targets and the WWN of the port, you can do

  foreach($esx in (Get-View -ViewType HostSystem -Property Name,Config.StorageDevice)){
      foreach($hba in $esx.Config.StorageDevice.ScsiTopology.Adapter){
          if($hba.Target){
              $hba.Target | Select @{N="VMHost";E={$esx.Name}},
                  @{N="HBA";E={($esx.Config.StorageDevice.HostBusAdapter | where {$_.Key -eq $hba.Adapter}).Device}},
                  Target,
                  @{N="Port WWN";E={$_.Transport.PortWorldWideName}}
          }
      }
  }
  

• Should I configure teaming for ports connect to the ESXi Server?

  Greetings,

  I want to install an ESXi 4.1 on a Dell 2950 with network 4 GB ports. 1 of them is used as netowrk management and I would like the rest of the team 3 connection, my question is should I configure teaming for these 3 switch ports on the physical switch for these 3 connection of ESXi?

  So far I have nothing on physical switch and it seems fine, I just want to know that.

  Thank you

  Mike

  If you do not need to run the virtual machine in different VLAN, then you don't need to configure a lot of things about the physical switch. Make sure only allow multiple MAC addresses on each port (switchport mode access) and covering the whole tree portfast.

  Configure vSwitch with uplinks 3 and you're ready. ESX will assign uplink in a responsive manner, because the virtual machines are powered on (default: route based on the source port id).

  André

• Script agent - monitoring telnet to a specific port connection

  I created this script agent as described below. Although when I deploy and create agent, I don't see an agent created on the dashboard of the Agents, or the data browser.

  Any other suggestions? Recommendations to improve extensibility? Also, if I have several hostnames and several ports, what is the best way to implement who?

  OMNI_PortMonitor.sh

  echo OMNI_PORT_HLPOM560_20301 TABLE

  echo START_SAMPLE_PERIOD

  HTTPSERVERIP = "hlpom560.someDomain.com".

  echo HTTP_SERVER_HOSTNAME. String = $HTTPSERVERIP

  HTTPSERVERPORT = "20301.

  echo $HTTPSERVERPORT = HTTP_PORT

  TELNET = $(which telnet)

  (

  echo "exit".

  ) | $TELNET $HTTPSERVERIP $HTTPSERVERPORT | connected grep > / dev/null 2 > & 1

  If ["$?"-not "1"]; then

  echo PORT_STATUS = 0

  on the other

  echo PORT_STATUS = 1:

  FI

  echo END_SAMPLE_PERIOD

  echo END_TABLE

  Thank you

  #AJ

  Hi AJ,.

  The best practice is to design your script so that it checks for the environment variables populated by a secondary ASP. If these environment variables are not defined, the script can set values of relief.

  I know that you have used the custom ApacheStatus agent. The collector for this agent, ApacheStatus.sh script, check the variables of environment generated by ASP. If they are not present, the script hard code a list of values. This allows the script to execute and generate data of interest from a list of servers Apache targets from the command line. You can modify your script to do the same.

  Kind regards

  Brian Wheeldon

• change the port connection to the mysql database settings

  Hello

  I created a mysql database on my hosting server, very basic, and I'm trying to connect to it. However receive a 404 error trying to test the connection. checked the settings with the hosting provider and all correct, they said to check that it does not try to connect on port 80 and should be the port 3306.

  How can I change this in the settings in dreamweaver cs4?

  Thank you very much

  Andy

  What happens if you try to create the connection to database from the server, rather than the site manager behaviors panel?

• Complete blocking of the PC that requires a difficult start to recover when you use Assistant scanner and camera when you use a peer-to-peer on a USB port connection.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello Cavman35,

  Thank you for your message.  Please provide comments to a few questions so that we can better help you get this issue resolved.
  This happens every time that you use/start the Scanner Wizard and camera?  If not, is there something that seems to be in common whenever it 'hangs '?
  Have you ever been able to transfer data using this connection, or is this a new phenomenon?
  Has anything changed since you started facing this problem?  To include hardware, software or update change.
  In the meantime, you can try a clean boot in order to eliminate the possibility of a 3rd party applications interfere with the transfer.  Click HERE for instructions to boot.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.