End of the ACS Station filter CLI/DNIS for WLAN SSID

Similar Questions

• How to set the restriction to access CLI/DNIS-based 5.3?

  Hello

  is that someone has an idea how the setting

  define access restrictions CLI/DNIS-based which is defined in ACS v. 4.2

  can be configured in acs 5.3?

  in c. 4 for each user in a group with 40 members a different CLI is defined for each. How can I configure version 5.3?

  any help, as always, very much appreciated!

  The equivalebt to NAR features are:

  Elements of strategy > Session Conditions > network Conditions > end of Station filters

  Can then define an object with a set of values CLI

  These objects can then be used in conditions of insurance. So may create a condition with a set of values CLI and then match the authorization policy for values that are included in this set and set permissions accoridngly

  Don't know if it's your use case, but I hope that can be a start

• Cannot save the ACS 5.4 as secondary for replication

  Dear all,

  I am not able to regisrter my ACS in DR 5.4 as secondary to my primary ACS in DC 5.4 for replication.

  Attached is the error I get

  Kind regards

  Ranjit

  Hello

  Enter the IP address of the primary server, not the host name.

  It seems that your DNS has no name, so you have to add the ip address and try.

  HTH

  Amjad

  Rating of useful answers is more useful to say "thank you".

• ACS 5.3 use LDAP. for one SSID and use IS HOST. for a different SSID

  I have 2 SSID on WLCs

  I wish I had 1 point SSID to the radius of the acs using LDAP store and the 2nd point SSID to the radius of the acs using identity store of the host for mac filtering.

  both scenarios are working, but not all.

  If I set the order of the rule I can get an SSID, but then the other fails.

  Authentication failed                                                                                 :

  22056 object was not found in the identity of the point of sale.

  Access matched Service selection rule:	Rule-1
  Comparative political identity rule:	Rule-1
  Some identity stores:	RBLDAP

  Evaluate the politics of identity

  15004 Matched rule

  15013 selected identity store-

  24031 sending request to the primary LDAP server

  24017 Looking up host in LDAP - 04-xx-xx-xx-xx-xx Server

  24009 host not found in the LDAP server

  22056 object was not found in the identity of the point of sale.

  22058 advanced option that is configured for a unknown user is used.

  22061 the option 'Refuse' Advanced is set in the case of a request for authentication has failed.

  11003 returned RADIUS Access-Reject

  If I move the mac add rule before the rule of ldap, but then the ldap authentication fails

  Request for access received RADIUS 11001

  11017 RADIUS creates a new session

  11027 detected host Lookup UseCase (Service-Type = check call (10))

  Assess Service selection strategy

  15004 Matched rule

  Access to Selected 15012 - MAC filter network access service

  Evaluate the politics of identity

  15004 Matched rule

  15013 selected identity Store - internal hosts

  24209 Looking internal host IDStore host - 04-xx-xx-xx-xx-xx

  24211 found internal host IDStore host

  Authentication 22037 spent

  I tried to install the following without result.

  It seems to me that there should be a simple process to do what happens. I thought that if the rule does not match it would be to move on to the next rule etc...

  I might be able to live with the first ldap control and if it does not pass to the db of the local host, but seemingly ineffective.

  https://supportforums.Cisco.com/thread/2133704

  You can create a sequence of identity store so that if the end point is not present in the ldap database, then it can check its database of the local host.

  Or you can create a condition in your selection of service such as if rule called-station-id ends with (AIDS) then you can have it match the rule that uses the appropriate rule pointing to ldap, another rule when called-station-id ends with (ssidB) match the rule that points to the rule that uses the database of the local host.

  Here is the section on the configuration of the sequence of identity store, don't forget to select continue if user not found.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_sys...

  Thank you

  Sent by Cisco Support technique iPad App

• HELP - read file that VI does not stop at the end of the WAV file

  Hello

  I am a beginner and I'm working on a project that opens a .wav file and it plays (with volume control). I found all the associated examples sounds extremely useful and I can just edit the audio file to output.vi his example to my project.

  I'm running into a problem where the vi does not stop at the end of the wav file, and it seems for a while loop. the wav file I am using ended a long min (and it has been converted to a data file in a wav file, if it matters). I have attached my vi modified here and appreciate any help.

  Thank you!

  Christy

  The OP and the æ OR

  Please go to help on the toolbar. Then select examples and search for sound. Locate the sound file "for his Output.vi.

• where is the secret field shared for the ACS 5.3 server itself?

  Hello

  We currently have a distributed PR and DR ACS 5.3 installation, implemented with Ganymede and a unit RADIUS.

  The RADIUS is AppResponse Xpert admin. used Opnet we try to intergrate AppResponse Xpert Admin with ACS.

  The GUI for AppResponse Xpert Admin request the ip address of the radius server - IE our ACS, RADIUS port - is to say 1812 and 'secret' - I assume that means the secret shared real AEC itself (not the shared secret used by network devices).

  On our ACS 4.2 systems, we have a field for a secret shared on the ACS itself Server (to allow replication?).

  With the help of the search function for "Shared Secret" in pdf format "the User Guide for Cisco Secure Access Conrol system 5.3" has only found references to define one for network devices and not a ground for GBA is.»

  A shared secret of the ACS server is still topical for the 5.x ACS system?

  Hi Stuart,

  To answer your question:

  There is no shared secret for the ACS itself.

  If the ACS needs to communicate with another device, you must define an AAA client and define a shared secret.

  ACS 4, used this secret shared to protect/secure replication, the ACS 5, secured by encryption replication and not shared secrets (hash).

  Rate if useful

• Our company subscribes to Fotolia until 2016/02. Is it possible to transfer our subscription to Adobe Stock before the end of the previous contract?

  It's all in the title. Our company subscribes to Fotolia until 2016/02 and we would like to know if it is possible to transfer our subscription to Adobe Stock before the end of the previous contract.

  Thanks for the reply.

  Hi Tkidesign,

  From now on, the migration is not possible. Thus, you will not be able to migrate your Fotolia licenses to adobe Stock, or vice versa.

  We will have something in place in the future.

  Concerning

  Arpit Kapoor

• How to move to the previous image at the end of the clip?

  Using Flash Professional 8. I have a menu with a Play Movie button on frame 1 and a clip on frame 2. On frame 1, the action script reads:
  
  Stop();
  
  myBtn_btn.onRelease = function() {}
  gotoAndStop (2);
  };
  
  So, on the release of the button on frame 1, it goes to frame 2 and begins to play the clip flv (using FLVPlayback). After 9 minutes, when the video is finished, it remains on frame 2 and the playback of the clip head began in the early.
  
  Should what action script I use to tell him to go to frame 1 at the end of the 9-minute clip?
  
  Thanks for any help.

  I got the answer to this question at actionscript.org

  Here's the answer below. Use the code below in the box 2 and replace FLVPlayBack with the instance of my (video) component name in image 2:

  function complete (evt) {}
  gotoAndStop (1);
  }
  FLVPlayBack.addEventListener ("complete", complete);

• AAA GANYMEDE + accounting - CLI question by user not appear in the report of the ACS.

  Can I know why CLI cancelled by the user does not show on GANYMEDE ACS accounting report. The length of time is displayed, but I also wanted to connect what is the commands issued by the user.

  WHA is missing here?

  enable AAA authentication login VTY P1_ACS local group

  Group default AAA authorization exec local P1_ACS authenticated by FIS

  AAA authorization exec CONSOLE none

  AAA exec by default start-stop accounting P1_ACS group

  AAA commands 5 default start-stop accounting P1_ACS group

  AAA commands 15 arrhythmic default accounting P1_ACS group

  Accounting logs command is stroed in the newspapers of the administration of Ganymede.

  There is also a known issue on ver 4.1.1 and we must

  apply the ACS 4.1.1.23.5 patch to fix the problem.

  Patch for the unit is available on

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-Soleng-3DES

  The patch name: ACS SE 4.1.1.23.5 rollup

  Acs hotfix for windows is available on

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-3DES

  The patch name: ACS 4.1.1.23.5 rollup

  CCIE Security

• 5.1 of the ACS and the filtering of the SSID

  Hello

  We ACS5.1 and WLC with sw version 7. Anyone know how we can configure SSID 5.1 ACS filtering. ACS 4.2 done us with filter NAR and Gwendoline.

  Best regards

  STAS

  You can use "End Station filters" to filter by DNIS.

  Elements of strategy >

  ... >

  Conditions session >

  Network conditions >

  End Station filters

  Then, you can add a rule in "Access Service" using the filters of end Station above.

• 5.3 of the ACS cannot work with two rules of service strategy

  Hello my name is Ivan

  I have a question about ACS v5.3 appliance.

  I have a v 5.3 ACS wo authenticate users wireless, as well as a cisco wlc. A profile is to business users and the second profile is invited.

  Business users must authenticate with Active Directory and the guest with WLC. Guest users to authenticate with the local database of GBA.

  I have set up two service political selection that correspond with the Radius protocol. The first rule is for users to Active Directory and the second is for users in

  the local database of ACS.

  When I try to authenticate users with active directory is OK, but when trying to authenticate users with the local database (Portal comments) GBA was trying to find the

  internal user in Active Directory, because math the first rule and the second profile cannot authenticate.

  When I change the order, first of all the State of users internal and second rule of users from Active Directory, internal users can authenticate in ACS, but

  in Active Directory users cannot authenticate.

  I think that my ACS authenticate only the first rule of the RADIUS to the Active Directory, not two rules of RADIUS at the same time. Or maybe there is a problem in the BONE of the ACS.

  Authentication separately is OK.

  Please could you help me to resolv this problem?

  I enclose my two rules

  Concerning

  Hello Ivan,.

  To solve your problem, you must configure your ACS so that the first selection policy (active directory) corresponds to only for users of the company and the other strategy of selection service (internal users) does not match.

  The second strategy selection of service must be only for guest users.

  If you use Cisco WLCs, it will be easier for you.

  Why?

  Because you can use 'End Station filter' easier to match the SSID.

  In feature selection policy, you build your game to the fine filter station (add it via the Customize button).

  Now, you must create two filters of end station, one is the ssid of comments and one corresponds to the ssid company. (tell how to create later)

  After you create the filter end station and match the selection policy of end station filter function, you have a political service selection matches corporate only guest SSID and other SSP the SSID matches.

  Now you can select different identity for the two SSP sources.

  Now for the filter end of station:

  End station filter is used (in our case) to distinguish the SSID.
  If I want to separate applications of different SSID, I use the end station filter to match what SSID I use.
  cretae end station filter to your SSID, follow the following image:

  

  on point number 4, write resounding brand (*) asteristk of your SSiD (case-sensitive), without spaces. Be sure to avoid spaces before or after.

  (I assume you are using cisco WLC. If not, the idea cannot be applied the way I described above).

  So far, we're OK, except one point. The default SSID guest is not sent by the Cisco WLC to the radius server when the client tries to connect to it, while the SSID of 802. 1 x is.

  To say the WLC to send the guest SSID, you must add this command to the WLC:

  RADIUS config callstationidtype ap-macaddr-ssid

  I hope I described correctly. Let me know if you got it or if you need more explanation.

  Greetings,

  Amjad

  Rating of useful answers is more useful to say "thank you".

• Based on rules of the ACS on Wireless SSID?

  As part of our policy BYOD, mobile phones are supposed to use only certificates for authentication, but they use MSCHAP and creds set caching to authenticate without a certificate. I think I can fix this in ACS by creating a rule that ALLOWS access if the user is using the x 509 cert and a rule that mobile DENYS access whether MSCHAP is used.

  I think it depends of ACS, be able to see users for particular SSID however. This is because we do not have another secure SSID and if I implement the above rules it would affect all looking wireless to auth.

  Does anyone know how to create political ACS from 5.2 the different SSID authentication?

  Josh,

  You can add a compound condition using the called-station-id RADIUS attribute, you use the operator "ends with" and then type in the SSID (case-sensitive), and you combine that with the method of authentication of x 509.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• I want to open links, I click on to appear among the tabs at the end (to the right) of my browser. Is there a way to control the order of the tabs?

  I find it confusing that when I click on a link, the new tab for this link opens somewhere in the middle of my line of tabs. I would have preferred that the new tabs would appear and the (right) end of the alignment of the tab. I see no way to control the order of tabs in Firefox. Is there a way to accomplish what I want?

  Type of topic: config in the URL bar and press ENTER.

  Answer Yes.

  Filter = browser.tabs.insertRelatedAfterCurrent

  Double-click this preference to activate it false.

  Then restart Firefox.

• New window opens next to old rather than at the end of the taskbar.

  Everytime I open a new Firefox window, it opens the window to the right of the previously opened window, instead of all the way to the right end of the taskbar. How can I change so the new window opens it?

  If you're referring to new tabs instead of new windows...

  You can change a preference to open tabs

  1. at the end of all tabs open
  2. immediately after the active tab.

  See: http://kb.mozillazine.org/About:config

  • Type of topic: config in the URL bar and press the Enter key.
  • If you see warning, accept it (promise to be careful).
  • Filter = browser.tabs.insertRelatedAfterCurrent
  • Look at the column 'Value' (' false= open to end, real= open after the current tab "); Value = true is the default value.
    
  • Double-click this preference to switch the value from true to false and false to true
  • Restart Firefox (file > restart Firefox)
  • See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/

  Some add-ons (like Tab Mix Plus and other tab extensions), may also have an impact on the opening of a tab position.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Firefox 8 puts new tabs opened from links in another tab at the end of the list, NOT next to the tab it just as in V3.6. I want it next to the tab that it comes. How can I do this?

  Question as noted, sums it up. When I click on the mousewheel on a link in a tab, for I want a new tab open with that link and want it beside the tab, I clicked on the link in any as Firefox V3.6 has done. Firefox 8 is always open the new tab at the end of the list and boy is that embarrassing!

  Please tell me how to solve this problem.

  Define the Boolean browser.tabs.insertRelatedAfterCurrent true pref on the topic: config page.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)