Win Vista update loop

Similar Questions

• VISTA UPDATE LOOP

  I also have the vista update loop just like everybody... how frustrating on mine, is that I don't have a CD/dvd drive to put the cd... and other fixes do not work. These are the only options in the startup options and none of them works

  http://I52.Photobucket.com/albums/G33/rakcs/DSC00003.jpg

  so I thought to install XP via USB stick bootable. but I can't make it work. not even sure if I can install xp without vista im cleaning.
  I also thought that the delivery of the missing update through bootable usb... but I'm not sure if this is possible... someone has it already tried? anyone with the same situation as mine? pls help... Thank you...

  You copy the image of the ISO file on the disk, Boot from the disk you...

  If the Bios of your laptop can't boot from USB: NO, you can not start him.

  You only know if your Bios/motherboard supports the boot from USB, or not.

  Now, you went beyond the scope of these Vista Help Forums.

  Now, you also have a hardware problem.

  Most portable computers have a DVD player; especially if they have Vista preinstalled.

  I suggest that you get your repaired/replaced DVD drive, or check the manual of your laptop to see if your card motherboard/Bios support boot from USB.

  When you sort this possibility, try a repair of the boot with the link "ISO file/make a disc of ' I you provided.

  If this does not work, reinstall Vista.

  http://compreviews.about.com/od/support/p/Averatec.htm

  Averatec contact what to do about starting from the repair disks.

  Good luck with it.

  See you soon. Mick Murphy - Microsoft partner

• Win Vista update problems - help on 31/05/13.

  I downloaded Win Vista updates, when installing updates, that seemed to be getting picked up in 15 of the 27 update.  If it stalls, should I try to download updates from windows updates again?  Now, the internet explore is dead and when I reconnected it in the internet it restarted the update where it left off.    Please let me know what I can do to get my updates again smoothly?

  Hi ARMinnesota,

  1. what happens when you open Internet Explorer?

  2 when running windows update, you get an error message or error code?

  Refer to the steps in the following Microsoft article and check if that helps.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602

  Notes:

  
  The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

   

  CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Keep us informed on the status of the issue.

• win vista update

  I use win vista 32 bit, and for awhile, it can not be updated, just take time and nothing, why this happen and how do I fix this?

  There is a likely reason missing there. "The update Client cannot manage, KB3168965, KB3164033, KB3145739, KB3109094 and KB3078601.

  http://Wu.krelay.de/en/

  Manually install those missing them. Start with KB3168965. The value of the automatic updates to 'never check updates' and restart Windows before installing.

  Best regards, VZ

• Win Vista, update of definition for Microsoft Security Essentials - KB2310138 (1.121.175.0 gives) goal definition code me; 800720005

  Updates appear to be current, but error codes are 80072005, not completed upgrades?

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message with the error code?

  You can follow the methods and see if it helps.

  Method 1

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 2

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

• Do not start satellite A300-1AK after Win Vista update

  Hello all, hope someone can help me

  I have a toshiba laptop with a view, I got the brilliant idea to make a update for a long time that no was not updated at the end I restarted the update as necessary nb. and then nothing!

  The practice turn on the toshiba nb outside screen and then the screen remains black, the hard drive does not read, I tried to put the recovery disk and start the disk but nothing to put the dvd, but no operating system, does not read anything...

  That's happened? Possible that an update is this damage? The problem and as I have already said that I can't act somehow...!

  -I can't access the computer Safe Mode
  -always black screen and does not load the hard disk
  -J' updated because I just reset the laptop with the recovery DVD, so the drive worked, once the update is complete, restart Windows that I came out of this black screen, I noticed that does not read the hard drive. ..

  Thanks for all the support and suggestions.
  Please send me more ' procedure to run

  Francesco

  Hmm, do you mean you don't see anything? Neither the Red Toshiba start screen?
  What to say it doesn't sound good.

  But try this short workaround:
  Disconnect the power adapter, remove the battery. Leave the laptop for a while disconnected from both parties I would wait a few hours
  Then bring the two parties together and try power upward

  Good luck

• The vista updates are not safe to use?

  I recently had the problem of vista update loop. I managed to fix it get, but it's not as simple as that. I don't want it to happen again. so, can someone tell me what updates can cause it again?

  I read that kb937287 caused the problem. and so it will never happen, it must be installed after KB949939. but the problem is that they both won'tinstall on my vista ultimate sp1. Maybe because mine is sp1.

  are there updates like this that cause the same problem? I was still worried and never install updates again? I hope that someonecan help me... Thank you!

  All updates for your particular computer operating system Vista security are safe to use.

  That's what Windows Update. He checks the updates are necessary.

  But, you must make sure that your computer is kept adequately

  Which includes:

  1 disk Cleanup.

  2. analysis of the antivirus. And Anti-Malware/Spyware Scanner on a regular.

  3. http://windowshelp.microsoft.com/Windows/en-AU/help/83ec0ffe-ee04-4d53-8b87-25d1f05c954e1033.mspx

  "Optimize Windows Vista for better performance"

  4. make sure that all drivers are up-to-date and perfectly Compatible Vista. Check in the Device Manager.
  Faulty 3rd party drivers will cause problems, including in the security update.

  5. in the optional updates, do not part away 3rd hardware drivers download.
  Always get thenm to the hardware manufacturer's Web site.

  Glad to see that your computer got fixed!

  See you soon. Mick Murphy - Microsoft partner

• Computer is located in a loop of reboot installation update to the configuration of the stage on Windows Vista updates

  problem with the configuration of updates on windows vista - endless loop - no way out

  like many before me, I can't start my computer because windows update has got stuck to the configuration. When I try safe mode, it ends up with screen-cant even get on the system of repair-naoual the same loop. No one at microsoft knows the answer to this >

  You need to start on the Startup Repair disk or recovery Manufacturer'e disk/s.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• What is 0 x 80070002? Win Vista crashed after the update was automatic.

  We use so-called win vista with SP2.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Windows Update Error 80070002

  If you receive the error Windows Update 80070002 of upgrades, you must delete the temporary update thatWindows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try to check for Windows updates again.

  If the above does not resolve the issue, please repost in the appropriate Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Win vista hm.prem./wu/update/

  Win vista hm.prem./wu/UPDATED - 1 attempt today (successfully) - install/THEN/5 x of other attempts to install the update-TODAY ' HUI-a failed and successful "duplicate" //-AFTER-// I changed the day - to - download & install update after selection.

  jbland,
  In addition to post the information requested from PA bear.  You can try the steps in this article and view the results as well.

  Troubleshooting Windows Update: offered on several occasions to update

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• !! 0xc0190036! 2665/49693 (Solitaire.exe) following Win Vista error message updated SP1 to SP2.

  Currently, I use Win Vista SP1. Yesterday, I downloaded and installed the Vista Service Pack 2 (SP2) yesterday by following the instructions of WINDOWS UPDATE. I then clicked on restart the computer and my world collapsed...
  This is what happened:
  The PC has begun to restart. A black screen came up with a line of top, showing the different numbers of fast scrolling. Then the line has frozen with the message:! 0xc0190036! 2665/49693 (Solitaire.exe).

  As a user of the computer without any technical knowledge, I tried various things like a hard reset and also using external manufacturer to start Recovery CD. After 7 hours of grief and panick, I managed to get the computer going again to return to the previous version of the software before installation of Vista SP2.

  I hesitate now to install SP2 until microsoft can explain what is happening with this pack sotware and how to avoid this problem doesn't happen again on my pc.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This aid, originally scheduled to end on November 26, 2009, has been extended, but will end on February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Loop of startup repair after vista update on 15-04-09

  .post a {text-decoration: underline ;}}

  Hello

  I hope someone here can help me.  I tried Googling for solutions, but after having tried everything without success, I'm bringing my problem here.

  I had gone through the internet when the program to close unexpectedly.   After trying to restart my laptop Dell 1720 (Windows Vista Home Premium), I went to bed after seeing the stage 2/3 update on the screen. It shows, in the morning, he can not start and gives me the ability to startup repair. After that, it is said that it cannot repair this computer automatically. Details of the problem are the following:
  Startup Repair V2
  AutoFailover
  6.0.6000.16386.6.0.6001.18000
  Bad driver
  WrpRepair

  I tried to restore to previous restore points (all tell me there's a missing file, error code 0 x 80070002), safe mode, last known good configuration and I end up in the same loop of startup repair. I have not installed recent programs, drivers and devices.  I am depressed and want to avoid going back to a factory installation since I've had this laptop for a year and have a ton of files and programs.  Anyone with any suggestions would be greatly appreciated.

  ETA: I also run chkdsk (no errors found) and sfc/scannow (Windows Resource Protection cannot run task or something like that).

  In fact, my problem has been able to start Windows Vista after the last update (14/04/09) install.  The error code came when I tried to restore my system to my restore points.  Finally I ended up taking my hd to access my data.  Then I tried to reinstall Vista from Dell provided and had problems reinstall drive to do so (hung up END INSTALLATION).  A call to Dell support had me change some of my BIOS settings and finally managed to get Vista installed.  Now, I'm in the painful process of restoring all my programs and personal data.  This time, I created a partition for the operating system and a separate for all my photos, music, etc. so I don't have this problem of losing all my data the next time the fact once again Vista (and it will be!  I already lived 2 BSOD since reinstalling 2 days ago!)  So, there was no solution to my original post.  Good luck to everyone else who has the same problem with the Vista updates.

• Win. Update on call to give me same download in Vista Help! :(

  Hello

  I just did a system restore to drive with my windows vista computer, I put updates through the night, got up this am. a lot of updates failed, so I ran the victory. update again after the restart and many of those failed righted themselves, well, I have 1 update of this keeps appearing, win. service pack 1 Vista, when I go to install the update it tells me that its will take time and my pc will reboot several times during the process, if the service pack box, I ok it, click on install and within 10 seconds, the download and installation is done! He has not installed the service pack and only gives me an error or anything, said it was successful and after... hit .i win. Update, give me the same service pack download updated but is what I described a few lines to the top.  It seems to me that while updateing that updates were not updated in the order that they should have been, as "the oldest to the most recent' and I need to get service pack 1 for the i can get SP2 and so on... anyone have any idea why it will not actually download and install Service Pack 1 after I ran the disk I got rid of a bunch of stuff that I didn't not supplied with the disc before I ran the update.  and they were HP games, Norton sec. yahoo toolbar, ect. These programs would be inbedded in BONE and maybe I should have left just as if it was before I uninstalled the programs that I didn't?  I use a HP Pavilion Vista premium edition, its an old computer, 5 or 6 years old dual-core Athlon 64 32 bits of the system, 2 gig ram... Well when I go in the computer properties indicates my ram to 1918 mb made this sound right? I have 4 512 ram cards, and 150 or 200 gig HD, anyone have any idea why it not to install the service pack?   TY for reading and replying if you do.

  Hi Steve,.

  Thanks for posting the request in the Microsoft Community. It seems that you are facing problems in updating Windows Vista Service Pak 1 on the computer. I will certainly help you to question.

  First of all, I suggest you to check if Windows Vista Service pack 1 is installed on the computer.

  Know which version of Windows Internet Explorer that you are using

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

  If Service pack 1 is not displayed, I suggest you the link and try to install it manually:

  You can check the link and try to obtain the latest Service Pack for Windows Vista:

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  I suggest refer you to the article and try to run the system update tool and check if it helps:

  System update scan tool corrects errors of Windows Update in Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  Let us know if it helps.

  Thank you.

• Impossible to update for systems Win Vista x 64 base update KB968930 and KB982666

  Have a system Win Vista x 64 base. Am able to update most of the windows updates, but these two are a problem (KB982666 and Windows PowerShell 2.0 and Win RM KB968930 2.0 security update).  Anyone with the same system and the same problem, but found an answer?

  Hello

  ·         Were there any changes to the computer, lately?

  ·         What is the exact error code that you get when installing these two updates?

  To check the error code follow the below mentioned steps

  (a) open the Control Panel (all items view), and click the Windows Update icon.

  (b) click the view update history in the left pane.

  To view the details of an update of one-stop shops

  (a) select and right-click on a Windows Update list, and then click Details.

  (b) click on the link more information see more information about the Windows Update selected.

  I suggest you try the following steps know us if this helps

  Method 1: Perform a clean boot to verify if a third-party software or application is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2: Disable the security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Method 3: Download and install the update the system (CHEKSUR) tool:

  http://support.Microsoft.com/kb/947821

  In addition, try to install the stand-alone package of these two updates.

• My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  original title: I have the same problem posted by Don Gagen on 16 April. My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  I installed some updates Vista Home Basic important for my laptop on Wednesday, and since then, my computer won't start. I get to the first page of Windows that shows "Configuration updates 0% complete" for about 15 seconds and then restart the machine. This loop continues indefinitely. I spoke to the manufacturer (Dell) who say there have been some recent problems with the update service, and I have to pay (£69) to address this problem. I don't really want to pay for a repair, when the problem does not seem to have been caused by me or my computer. I tried all the options from the start menu, but there seems to be no way to solve this problem, for example, in 'Safe' Mode, the problem persists, and 'Last successful login' does not work either. It will not launch command prompt. I ran Dell diagnostic check before extended initialization and there seems to be nothing wrong with the hardware. I have no disks system of re - install Vista (and that I would lose all my data anyway). I can also access the ID of the license of Vista. The computer is no longer under warranty, and I have no agreement to support hardware or software for it.

  I would be grateful for any suggestion.

  Alan

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395