VISTA UPDATE LOOP

Similar Questions

• Win Vista update loop

  My computer is stuck on windows update 3 with a continuous loop. Computer not start in any safe mode or respond to restore the last known good configuation. Repair your computer will produce all the restore points. I tried to install the vista installation disc, but the computer seems to ignore the drive and return to the update loop 3. The screen with the endless loop will be turned on for a short period and then stop and restart and return to the same screen and windows update 3 loop. Nothing seems to work.

  Hello

  Check if this link is useful.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  https://support.Microsoft.com/en-us/KB/949358

• The vista updates are not safe to use?

  I recently had the problem of vista update loop. I managed to fix it get, but it's not as simple as that. I don't want it to happen again. so, can someone tell me what updates can cause it again?

  I read that kb937287 caused the problem. and so it will never happen, it must be installed after KB949939. but the problem is that they both won'tinstall on my vista ultimate sp1. Maybe because mine is sp1.

  are there updates like this that cause the same problem? I was still worried and never install updates again? I hope that someonecan help me... Thank you!

  All updates for your particular computer operating system Vista security are safe to use.

  That's what Windows Update. He checks the updates are necessary.

  But, you must make sure that your computer is kept adequately

  Which includes:

  1 disk Cleanup.

  2. analysis of the antivirus. And Anti-Malware/Spyware Scanner on a regular.

  3. http://windowshelp.microsoft.com/Windows/en-AU/help/83ec0ffe-ee04-4d53-8b87-25d1f05c954e1033.mspx

  "Optimize Windows Vista for better performance"

  4. make sure that all drivers are up-to-date and perfectly Compatible Vista. Check in the Device Manager.
  Faulty 3rd party drivers will cause problems, including in the security update.

  5. in the optional updates, do not part away 3rd hardware drivers download.
  Always get thenm to the hardware manufacturer's Web site.

  Glad to see that your computer got fixed!

  See you soon. Mick Murphy - Microsoft partner

• Computer is located in a loop of reboot installation update to the configuration of the stage on Windows Vista updates

  problem with the configuration of updates on windows vista - endless loop - no way out

  like many before me, I can't start my computer because windows update has got stuck to the configuration. When I try safe mode, it ends up with screen-cant even get on the system of repair-naoual the same loop. No one at microsoft knows the answer to this >

  You need to start on the Startup Repair disk or recovery Manufacturer'e disk/s.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Loop of startup repair after vista update on 15-04-09

  .post a {text-decoration: underline ;}}

  Hello

  I hope someone here can help me.  I tried Googling for solutions, but after having tried everything without success, I'm bringing my problem here.

  I had gone through the internet when the program to close unexpectedly.   After trying to restart my laptop Dell 1720 (Windows Vista Home Premium), I went to bed after seeing the stage 2/3 update on the screen. It shows, in the morning, he can not start and gives me the ability to startup repair. After that, it is said that it cannot repair this computer automatically. Details of the problem are the following:
  Startup Repair V2
  AutoFailover
  6.0.6000.16386.6.0.6001.18000
  Bad driver
  WrpRepair

  I tried to restore to previous restore points (all tell me there's a missing file, error code 0 x 80070002), safe mode, last known good configuration and I end up in the same loop of startup repair. I have not installed recent programs, drivers and devices.  I am depressed and want to avoid going back to a factory installation since I've had this laptop for a year and have a ton of files and programs.  Anyone with any suggestions would be greatly appreciated.

  ETA: I also run chkdsk (no errors found) and sfc/scannow (Windows Resource Protection cannot run task or something like that).

  In fact, my problem has been able to start Windows Vista after the last update (14/04/09) install.  The error code came when I tried to restore my system to my restore points.  Finally I ended up taking my hd to access my data.  Then I tried to reinstall Vista from Dell provided and had problems reinstall drive to do so (hung up END INSTALLATION).  A call to Dell support had me change some of my BIOS settings and finally managed to get Vista installed.  Now, I'm in the painful process of restoring all my programs and personal data.  This time, I created a partition for the operating system and a separate for all my photos, music, etc. so I don't have this problem of losing all my data the next time the fact once again Vista (and it will be!  I already lived 2 BSOD since reinstalling 2 days ago!)  So, there was no solution to my original post.  Good luck to everyone else who has the same problem with the Vista updates.

• My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  original title: I have the same problem posted by Don Gagen on 16 April. My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  I installed some updates Vista Home Basic important for my laptop on Wednesday, and since then, my computer won't start. I get to the first page of Windows that shows "Configuration updates 0% complete" for about 15 seconds and then restart the machine. This loop continues indefinitely. I spoke to the manufacturer (Dell) who say there have been some recent problems with the update service, and I have to pay (£69) to address this problem. I don't really want to pay for a repair, when the problem does not seem to have been caused by me or my computer. I tried all the options from the start menu, but there seems to be no way to solve this problem, for example, in 'Safe' Mode, the problem persists, and 'Last successful login' does not work either. It will not launch command prompt. I ran Dell diagnostic check before extended initialization and there seems to be nothing wrong with the hardware. I have no disks system of re - install Vista (and that I would lose all my data anyway). I can also access the ID of the license of Vista. The computer is no longer under warranty, and I have no agreement to support hardware or software for it.

  I would be grateful for any suggestion.

  Alan

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Update loop

  Help, please. I have vista and a windows automatic update is a loop. I am really computer illiterate. can someone explain to me what to do in easy words.

  I don't have the original vista disc such that it has been preloaded on laptop when I got it.

  I have 3 drives that I need to have copied when I got my laptop. the latter I called recovery of 1, 2 and FIPS appdrv 1. I don't know what they are for.

  Help, please.

  lilyg01,
  Please give us some details about your problem.  You say you have 'an update loop' so what exactly do you mean by that?  Are you getting the same update presented whenever you start or it is actually trying to install an update every time that you start?  This error message do you receive?  What is the update you get?

  If you are able to boot to your desktop, you can try this: reset Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04:17:0407/17/11

• Vista update problem - stop to update 3/3 0%

  original title: Vista update problem

  When my computer tries to finally start up, it comes to a screen that says Windows Update section 3 of 3, 0% complete.  He is sitting here for a minute or two, then restarts.  This loop continues indefinitely.  Will not start in safe mode.  Used a boot disk to get into the Windows repair and got the result, did not find any problem.  How to cross this attempt to update?  I have Vista.

  When you used the "Startup disk" was available as an option system restore? If so, then choose a restore point created before this issue started occurring.

  If the system restore is not available, then you have 2 options:

  (1) try a "in-place upgrade", aka, repair installation. This can be done by running the system with the "Startup disk" and choose command prompt - How to perform a repair for Vista Installation

  However, if Service Packs have been installed then you should uninstall everything first.

  You will need to know where the Service Pack .exe file is to be able to uninstall the command prompt, because the system does not start properly, or Mode without failure.

  See - method 3: uninstall Windows Vista service pack from the guest here - How do I uninstall Windows Vista service packs as a troubleshooting step

  (2) do a clean install of Vista.

• Windows Vista update: platform supplement for Windows Vista update: KB2117917-french

  Hello, first of all, thanks to anyone who can help me!

  I have problems to install the platform update Supplement for Windows Vista update: KB2117917-french, who keeps trying to update automatically when you start computer.

  Basically, what happens is I turns off my computer and it will update first before turning itself off. I then come back on and it will start installation of finish 3 steps. After 100% on the last screen of the stage becomes black and restarts. As his departure upward, it goes to a black screen and it says something about registry 0/621 or so then he load some files. THEN it goes black again and restart once more.

  This time, it goes to the screen similar to where it puts up-to-date, except it says return update, and then my windows loads very well.

  It's a constant loop and I really need help. I tried the system restore, but I had not all dates really old to restore, and the older that I could do has not solved the problem.

  Again, any help would be appreciated. ^_^

  Hello, first of all, thanks to anyone who can help me!

  I have problems to install the platform update Supplement for Windows Vista update: KB2117917-french, who keeps trying to update automatically when you start computer.

  Basically, what happens is I turns off my computer and it will update first before turning itself off. I then come back on and it will start installation of finish 3 steps. After 100% on the last screen of the stage becomes black and restarts. As his departure upward, it goes to a black screen and it says something about registry 0/621 or so then he load some files. THEN it goes black again and restart once more.

  This time, it goes to the screen similar to where it puts up-to-date, except it says return update, and then my windows loads very well.

  It's a constant loop and I really need help. I tried the system restore, but I had not all dates really old to restore, and the older that I could do has not solved the problem.

  Again, any help would be appreciated. ^_^

  Hey Urdethismylife

  Try the repost in the forum for this windows update

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Problem installation Vista updated and now the Vista operating system unbootable - help

  Here it is the description of what has past.  Ive been through everything I can do and am now stuck with a code of 0 X 4001100200001005.

  I worked with Microsoft Vista forum group of answers, but I'm not back upward and running if Im going back to HP for assistance.  I hope that we can achieve together.  This all started when started Vista updates failing.  I got the 1 3 install stuck on the 2nd about three weeks ago.

  Here is a list of what I've done so far
  I have an old HP DV9410us for a year which will not restart after installing updates.  It comes to configuring updates step 1 from 3 to about 98% and then stops.

  It then says unable to start windows and start the repair program windows for about 5-10 minutes.  He said that you want to use the system restore.  I tell Yah Why Not.  Then, it will stop and start the cycle.

  The error in the Startup Repair States the following

  After a bunch of tests successful

  Root cause found:

  c:\ntoskrnl.exe is corrupted.

  Repari Action: Repair of files
  Result: failed.  Error code = 0xa
  Duration 6521ms

  Action repair system restore
  Result: Completed successfully

  He then returns to the cycle all over again.

  I turned the clock to October with F10 at startup but that did nothing.

  I checked the hard drive for the short and complete and checked everything.

  I dug my recovery disks I did ago about 10 months after I bought and used to return to the top of my hardrive.  I was all ready for a MAC at this point.

  I went back to the HP Recovery program and tried to restore an earlier version of a well-known operating system.  The Manager of recovery disk wont work so I used the Recovery Manager disk.  There is no old configs to this true its in step 2.

  I'm now trying to perform a factory image recovery.
  Reload the operating system.  It started and got to 13% after 20 minutes and gave me the following error code.

  During this process, I have an error that had the code 0 x 4001100200001005.

  It is the reformatting of repeat of the Windows Partition.

  Is this a Vista update problem?  Have you seen this before?

  I'm doing a factory restore and will let you know if this operation fails.  I just wanted to get this thread started.

  I really appreciate this forum and any help you could give me.

  Message edited by ftrnow on 12/30/2008 08:17

  If you had an error in "configuration update 1 3-3 3 ' which would be a problem with windows update.

  to fix this, you'll need a factory image recovery if you can not access other modes for windows. But youy mentioned that you had a 0xx000x... (similar to code) error... try checking the hard drive and memory modules health... threr could be a problem with these devices, you can access it through the bios settings (turning on laptop, the moment you see hp invent screen, press f10) go to the diagnostics section, run the memory test and that hard drive test

  very probably with the error you have, you might have a hard drive problem.

  most of my clients (I am a specialist of the laptop of beak) with that problem and stuck on a boot loop or may not switch from windows, 95% of them had a hard drive failure.

• Vista update and we now have a black wallpaper - Satellite P300

  Windows Vista update last night on our P300 laptop and is now rather weird.

  We get only a black background solid and a lot of the icons that we had are gone, and it will not change the wallpaper. Most of the programs are not loading at startup as usual (only anti virus) and most of the things are missing from the start menu... it happened to anyone before? It sounds almost to what they do when you have a pirate copy of Vista (and of course this one IS legitimate as it came with the lappy)...

  Any suggestings?

  I did not physically see the laptop and won't til tomorrow myself... Although my companion knowing its probably just something simple but thought check here around before that snack.

  Thanks :)

  Solved the problem...

  A windows update some how corrupted the registry.

  I hit log off in windows and then tried clicking on the user name to connect (we just auto journal in value) and when trying to load the profile, we had a service user profile Service has no logon.

  A system restore fixed the issue... :)

• Satellite P100-442 - sound after Vista update problem

  Vista Home Premium operating system.

  Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
  It does that after I do a "ch for devices modified" via "Device Manager".
  But I do whenever I have start the laptop.
  Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

  Try to restore to an earlier time using System Restore option.

  If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

• Satellite A300 starts after Vista update

  Hello everyone!

  I had a problem with my Satellite A300. After installing Vista updates laptop is restart automatically, so it is not commissioning and screan is black, but buttons is the lighting, the cooler works.

  You have a solution to this problem?

  Hello

  Remove the battery, disconnect the adapter and wait for about 30 minutes.
  Then reconnect both parties and try to turn on the laptop.

  Check it out!

• After that Vista update of my Satellite L40 won't start

  After automatic Vista update of my boot of t n for laptop and the screen is black. Using the F8 key I have the advanced startup options, but none of them helps. The screen remains black. Hard drive led is always off.

  I have Satellite L40. I restored the OS using Toshiba drive. All data has been lost. After 2 or 3 days, update has been installed again and I noticed the same problem. What can I do?

  Please help me!

  For me, there is only one option: disable the automatic update to Vista.

  By the way: when that happen, have you tried to boot the operating system in safe mode and roll back OS to an earlier time using System Restore tool?