I bought a Sony BDP - S185 connect Netflix Blu - ray player. I can't connect to the wireless router. Why?

Similar Questions

• I received a message on my laptop computer that says not able to connect to the wireless router.

  I received a message on my laptop that says could not connect to the wireless router and it make reference to section of the knowledge base Microsoft 87112 for more information.

  I think you have transcribed the number incorrectly.  I think that the article you want is this one: http://support.microsoft.com/kb/871122

• no internet but not connected to the wireless router

  I have 400 SL with windows vista installed.
  Everything worked well for years, until a few days ago.
  It is the symptom, and what I've done:
  1. the laptop CAN connect to the wireless network, no problem, very strong, just signal has no internet.
  cannot ping google.ca.
  In network and sharing Center:
  Computer---> network---> Internet
  ^                   ^
  |                     |
  Red Cross OK
  2. all other devices (iphone, ipad, other laptops) can connect to the network and internet.
  3 did a system restore on the eve of this stoppped working. always the same.
  4A bought a wireless adapter, always the same. but it works fine on the other laptop
  5 tried to set a static IP, subnet mask, gateway, still the same problem.
  6. any other device can ping each other with the exception of this laptop...
  7. the seller cordless tool is uninstalled (Lenovo connection management tool)
  8 rebooted a million times between all the steps
  9 safe mode with network has the same problem.
  10 tried to use other wireless, still the same problem...
  need help...
  Thank you
  -Virginia

  Hi Virginia,

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the problem, I understand that you can not connect to a wireless network on windows vista computer.

  I appreciate your efforts on this issue, however no need for you to worry we are here to help and guide you in the right direction.

  Help me with the information below.

  -Don't you make changes on the computer before this problem?

  I suggest you to disable temporarily security software and then check if you are able to connect.

  Method 1

  You can also temporarily disable the security software and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  Method 2

  Reset the router and see if that helps.

  Note: to help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.

  You can see this help article.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Satellite A105 - unable to connect to the wireless router more

  I had the success of connection to a router Wireless Linksys for the last few months. Today, that I couldn't connect to the Linksys still another. A few times I have to connect to the Linksys router, but I got a weak signal so I would be disconnected. The green bars on the router Linksys under available networks are all solid green full bars, but I can't? t connect.

  To do or check to login once more?
  Thank you

  HM, you will need to do some research! What was the last you´ve installed applications? Installed new drivers/tools/software on your computer?
  If not you already installed the latest drivers for the chip wireless for your laptop? If not already done, then try it and Don t forget to update BIOS. :)

  If anything brought success then just to give a few comments. :)

  Welcome them

• Laptop fails to automatically connect to the wireless router.

  Original title: re automatic updates for Windows Vista

  My wife & I have laptops running Windows Vista in our House. Recently, his cell phone fails to connect to our wireless router automatically. To connect, it must get the computer to automatically get new IP settings for the network adapter. However, she must do it several times to make a connection & must be done each time it connects. My laptop is not the problem. His only started to do recently. What can we do to make his newspaper from the laptop to the internet automatically without problems?

  Hello

  Follow the steps mentioned below and check to see if they help.

  Step 1:

  Card drivers update of your network.

  Step 2:

  In addition, you can uninstall and reinstall the Device Manager wireless network card to be a safer side.

  To uninstall the wireless device manager,

  a. Click Start, type device manager in the search box of start and press ENTER.

  b. Locate the network adapters and expand the same.

  c. Select the wireless connection, right click and choose uninstall.

  d. restart the computer, if prompted.

  Pilots should settle automatically after the computer restarts.

  Now you can install the latest wireless drivers and check if this solves the problem.

• HP photosmart 5520 cannot connect to the wireless router

  The printer has worked I went on holiday, and now it will not work. I have run the wireless network test, and it says "hp printer is unable to connect to your wireless router.  The wireless router is connected and works fine.  My hp wireless computer (windows 7) works very well.

  The structural 'found ssid network name' report, said down

  But "current configuration" has shown the SSID

  can anyone offer a fix?

  Help

  colleenmercy

  Hi colleenmercy,

  In the network menu, select default network.  This reset the current network settings and will help you reconnect the printer to the network.  You can use the Wireless Setup Wizard or reinstall the HP software to reconnect.

• Unable to connect to the wireless router

  I can't connect to my wireless router.  My PC shows that the router has an excellent signal strength. The password is correct, but it will not connect.  What Miss me.

  Moved from Explorwer Internet

  Original title: wireless network device network Ethernet network router

  Hi Trisha,

  Many routers need firmware updates to work with Windows 7. Maybe it's the issue.

  Please answer these questions:

  1. What is the brand and model of the router?
  2. If it works much earlier?
  3. Any changes made to the computer before the show?
  4. What is the exact error message received when you try to connect to the router?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:

  Set up a wireless router

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Setting up a wireless router
  http://resource.Dlink.com/connect/setting-up-wireless-router/

  Post back with the State of the question.

• HP Deskjet of 3630 3630: HP printer 3630 AirPrint - connection to the wireless router connected to an iPad

  A friend just bought a 3630 HP printer and has implemented and able to print from the iPad but, to do so change the Wi - Fi connection setting on his iPad between the router and the printer, and then when the printing is finished return the iPad.

  How can she change WiFi the printer setting to match that she has for the iPad?

  Lets see if we can get lucky.   Disable the WiFi Direct from the front panel.

  In reading the manual...

  To turn Wi - Fi Direct or off
  On the printer control panel, press the button Wi - Fi Direct ().

  ● When Wi - Fi Direct is activated, the Wi - Fi Direct light is stable. To find the name of Wi - Fi Direct and
  password, press the information button () to print a printer information page.
  NOTE: When you turn on Wi - Fi Direct the first time, the printer automatically prints a Wi - Fi Direct connection
  Guide. The guide provides instructions on how to use a Wi - Fi Direct. After that, you can press the Wi - Fi
  Direct button and the Info button () to print the guide of Wi - Fi Direct. The
  Guide are not available in all languages.

  ● When Wi - Fi Direct is disabled, the Wi - Fi Direct light is off.

  ● For more information on the situation of light Direct Wi - Fi, see the control panel lights and display icons

• When I try to connect to the wireless router, it asks you the password I put it and he then asked again and will not accept the password. all other computers (without windows 7) connect correctly.

  My new computer has windows 7 when I try to connect it to my router it ask the password, then he asks the network password I put in the same password and it does not accept it. I spent ove an hour on the phone with a very helpful and confused expert to the Virgin. He tells me that the password only I need to communicate with the router is the main. We tried a lot of things all very technical and finally he gave up. Other computers with vista on connect very well with no problems at all.

  The network is fine and all the settings are fine. Occasionally, it connects via a home network but then it stops. When I try to communicate with the printer wireless signal stops and starts.

  I don't hold much hope of a response that experts were left very confused by this first abandoned after 45 minutes and the second lastered over an hour are totally flumaxed and blame windows 7

  But everyone told me that windows 7 was supposed to be the best

  Your post has nothing to do with the Windows Update feature (compared to the upgrade of Windows). Please repost it here for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Connectivity of the wireless router problem

  I have a Cisco's Linksys WRT160N wireless router.  After it is up and running, all my wireless devices work fine.  My sons Wii for my laptop, my wifes iPod Touch. But the strangest thing is happening.  I have problems connecting to the internet with my desktop computer that is hard wired to the linksys router.

  Often I can connect any... other times it's quite slow compared to when I plug my office directly to a cable modem.  Finally, sometimes certain aspects of the Web page will appear while others won't.

  Question: Is damaged?  Or is there something that I am missing.  You would think it would be right forweard enough... OH, I have also replaced the cables from the desktop to the router and have already done all the reboot that I care to do as well as redo the ip address in the part of the repair of my control panel.

  Any ideas?

  Access the Page of configuration of your router and lower the MTU size of the router to Auto/1500 to 1400.

• iPhone connects to the wireless router but the PC can't

  HI - hoping someone can provide some answers to my problem. This happens a lot.

  For some reason, the awakening of my PC it does not connect to internet or router (192.168.0.1). Restart the PC makes no difference. I have an iPhone that connects very well during all this time (via wifi, with cellular networking turned off).

  This is what happens:

  I go to network and sharing Center to connect:

  [img src = "http://i39.tinypic.com/e031x5.jpg"]

  The sky connection is to me, with an intense sound signal:

  [IMG] http://i44.tinypic.com/24qn1x3.jpg [line]

  He then quickly says "successfully connected to sky", although the network & sharing poster always the router as "id" and without internet access:

  [IMG] http://i40.tinypic.com/ehek4w.jpg [line]

  After a wait of 1-2 minutes, he moved to 'unidentified network' and without internet access:

  [IMG] http://i40.tinypic.com/2qbha4p.jpg [line]

  Ipconfig says:

  [IMG] http://i43.tinypic.com/dgl2jm.jpg [line]

  Network cards seem to be OK:

  [IMG] http://i41.tinypic.com/ev5g95.jpg [line]

  [IMG] http://i41.tinypic.com/210zhg0.jpg [line]

  [IMG] http://i44.tinypic.com/21pt9g.jpg [line]

  What I can do is to reset the router by unplugging the power for a few seconds, allowing a restart. After that, the PC connects fine and I can access the main router page:

  [IMG] http://i42.tinypic.com/r28gev.jpg [line]

  I don't want to have to reset the router whenever it goes well! Any help on why this is happening and what's wrong with my settings would be greatly appreciated! Thank you.

  (Sorry that the images do not seem to work on this forum, but you can copy and paste; also, tips on how to show the pictures would be appreciated!)

  Hello

  I suggest you to update the latest drivers for the network adapter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• Connection to the wireless router

  I currently have intermittent connection problems with my router with my wireless Vista adapter.

  Sometimes, either after booting, or the disconnection of a single account and connection on Vista another account; I can not connect. Generally, the error is expressed as security key is incorrect. However, I know that the phrase/key is correct.

  Sometimes, the adapter is disconnected and then re - set it solves the problem, while other times I had to delete and re-create the profile Wireless under the wireless network connection control panel. However most of the time I have to use to turn off the router and turned on again. It almost always does, the connection works again.

  Also, whenever a while the internet connection stops, usually when I just clicked on a web link.

  Do you know what could be the problem?

  Some journal entries you posted State "unknown user name or bad password".  This is the type of connection 2 which are attempts to connect to your PC locally (i.e. just started).  You also said earlier that when you are prompted for a security key to connect to your router, it sometimes rejects because the passkey is incorrect.  One thing that comes to mind is that you have a key that is stick on your keyboard, which is originally evil type your logon password and security key.

  Open Notepad on your computer and simply type anything.  Type your passwords and the security key passes a number of times and see if any characters repeat or not be typed at all.  If this is a Wireless keyboard, try replacing the batteries, otherwise a can of compressed air which will usually clear upward.

  If you constantly have to power cycle your router or disconnect your Wireless adapter to get a connection, then you have a hardware problem.  One of the errors you listed was "service temporarily stopped publishing because of a power event".  What happened when the error has been written?  Check with the manufacturer of these devices to see if they work properly.

  Are you able to connect to the router with an ethernet cable access to the internet without problem?

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP6110 printer connection to the wireless router, USB port

  I have a HP Officejet 6110 all-in-one printer, a Toshiba laptop running Windows 7 and a CGN3ROG Hitron of wireless router.

  I try to get the printer on my home network by plugging it into the USB port on the router. I can't make it work. Has anyone managed to do this?

  Derek

  Hello Cheetah12,

  Thank you for your response. Yes, my printer - HP6110. I have read the manual you sent me and understand that I can not connect directly to the router with print server - print server HP JetDirect 175 x Rogers, tells me that the router is turned on print server. I'll have to break down and buy a wireless printer. The networks of the great printer if I connected to a computer.

• What should I do if the wireless radio does not work and cannot connect to the wireless router?

  What should I do if, during the installation of my c309a Photosmart Premium printer all in one, which I am trying to install a wireless connection, I get an error message that the wireless radio is not working?

  Solved by turning the radio off and then on new wireless.

• Why can't I access the modem 192.168.1.1 when connected to the wireless router?

  I'm unable to access my DSL Modem 6100 Westell using 192.168.1.1 when connected to the Netgear WNDR3400 wireless router. I can access it, however, when I connect directly to the ethernet port on the computer without going through the router. I've set up according to the instructions. Is it possible to correct the problem?

  This isn't a problem.  This is the standard behavior.  You are connected to the side LAN of the router that is isolated from the side WAN (uplink).  This is the mode of operation of routers.