Enlarge the cell size in the control table will be slower enforcement program?

Similar Questions

• initialize the control table dimension

  I use LV 2009 SP1 and you want to create a table 1 d of size control fixed.  The elements of the array are a defined group of different controls (enum and boolean) data type.  Control table will reside on a front panel and will be initialized with the values via the software, but the user will have access to change the values of array element (for example, change the enum and boolean controls.  While the user has access to edit the elements of the array, I don't want the user to be able to add new items in the table.  The table must have a vertical scroll bar, given that the number of elements at initialization of the array can be great and also can vary.  I am familiar with the property of the table "Number of lines", but it only controls the number of visible rows in the table.

  Is there a way to set the number of items per program and still have a scroll for the user to index bar using the table, but not add new items?

  Also see the attached screenshot for reference.

  Thank you

  Dan

  I found an acceptable solution through the reading of other forum posts.

  For others, who may find this useful:

  By hiding the display of array index and all the scroll bars, the table can be fixed to the size.  A separate scrollbar is used for the index in the table by writing to the array of Index values property.  The min/max scroll bar may be limited by writing to the Min Doc, Doc Max properties.  I've attached a screenshot of the block diagram.  The value of constant labeled '# lines visible-1' is on the number of items pulled on the panle front less 1 and remains in control of the table of displayiong of the empty elements that allow the user to change.  Also, even if the Page Size property has a value of zero for the scorllbar, which should allow scrolling of the Min Doc to Doc Max, he does not accept it as a valid value and is instead converted to a value of 1.  I introduced a SR on it's a bug because the LV help suggests that the values zero or negative must be acceptable to the Size property of the Page.

  I think it's the solution to the question, although it would be preferable that the size of the table control could be fixed size affecting a property element.  I'll see about adding this title of suggestion.

  Dan

• Vertical scroll bar in the control table

  I use CVI 2012 and using a table control in the editor of the IUR. I started with a table containing 27 rows and 5 columns. The Panel container was large enough to display all the rows and columns, so without scroll bars have been necessary. Then I added more than 14 rows in the table, and a vertical scroll bar appeared on the right edge of the table. «By default, she marched to the bottom of the table, and I tried to change this up by changing"line 41 / 41" to "line 1 / 41" in the editor of the IUR.» He put back the first lines of the table, but the bar scroll also disappeared and I can't seem to restore, even if the table has more lines that can be displayed in the Panel containing.

  In dialog box "Edit Table" editor of the UIR, in the field of the 'appearance of control', the ' scrollbars: ' control has the value ' both scroll bars. I tried a number of combinations in the dialog "Options for size/Scroll...". "so - nothing seems to restore the scroll bar.

  I will attach the UIR file where this is useful. Interest table is the tool 'ID' tab thanks in advance!

  Barry Wealand

  I figured this out. Somehow, the width of the table control had also grown, such as the vertical scroll bar was pushed out the Panel on the right. By adjusting the size of the control so that the width of the table fits once more in Control Panel that contains the scroll bar appears once more.

  Barry Wealand

• Using data from the control table

  Hello

  I would like to use the data entered in a table to automate volume/sequence of airflow for a test Chamber. As shown in the screenshot of control table, the first column indicates the number of iterations by elements of array in a series of tests and the second data column specifies the length of each line sequence. Entries in the other columns are specific to different valves and specify values set required in the flow meter.

  

  I guess my question is how can I index/assign each column of the table such that the data to exploit the respective valves are obtained in subsequent iterations all acquire simultaneously with data from other components in the order? While I recognize that the solution may be very simple, I searched on through various examples and messages on the tables and the tables without knocking on a solution. The attached .vi allows me to be a part of the series of tests.

  Best regards

  Callisto

  Hi Callisto,

  If I understand your question then the solution is actually quite simple. The important point to keep in min is the fact that the Table control can actually be treated as an array of string. You can then use all the traditional table manipulation tools and techniques to manipulate your data as you wish. For example, use the Array Index function to retrieve specific columns and then if you want to spend the individual elements in a column in a loop, wire the table until the loop and ensure that indexing is enabled. If you then want to use these data elements to control your test application, you can convert a portion of the resulting string in more useful to digital.

  All these concepts are illustrated in the attached VI. I hope this helps, but let me know if you have any other questions.

  Best regards

  Christian Hartshorne

  NIUK

• When the id program in the base table will be updated?

  Hello

  I have a trigger on the table mtl_system_items_b that fires events when a record is created / updated. I need to create a program that will update the records in the table, but at the same time, it will not trigger trigger events for the updated records. My plan is to use the program_id column in the MSIB table to check if the particular update is done by the new program. Now, the question is, what happens if the same record is updated by any user front end (after the execution of the program)? It will update the program to something else id so that the trigger fires the event? If this isn't the case, then how can I limit the trigger for these recordings?

  We can disable the trigger during execution of the program, but that we will lose some updates made by users on other records.

  Thanks in advance... !!

  Devendra

  Hi Devendra,

  When someone updates the same record on before the id program also updates.

  Solution because it would be too write a when clause to your relaxation. Something like below

  CREATE OR REPLACE TRIGGER

  after insert/update

  REFERRING AGAIN AS NINE OLD AND OLD

  FOR EACH LINE

  Where (NEW.program_id = )

  DECLARE

  end;

  hope this helps you.

  Kind regards

  SoundariyaKumar.R

• How to remove select data in the control table

  This problem makes me headache.

  I'm new to labview, when data in a table. a lot of lines and columns. How can remove on the line that I chose. the other lines are remain unchanged.

  I really need help.thanks in advance. It is best to attach the labview program.my is 2009

  That kind of thing does not work with the table that's why I suggested to go for the multicolumn list box. You can do simple.

  

  Good luck

• Windows has started to put some files in two places at the same time, will appear in some programs

  Hello

  in the last two weeks, I noticed that Windows (I use Windows 7) began to act up with its allocation record. First of all, I noticed that a new folder I created for some music files was not detected when I tried to open the file in a music editing program (Adobe Audition). If I created a new folder in a different location and copied the files into that, suddenly hearing would recognize the folder. Change a few days I noticed that in addition to this, when I copied a disc into my computer, after you select a new folder for the files to copy, Windows would create a second copy mirror of the folder and the files and place it in another location not of my choice (this all happens within my music library folder). Some files that I had cut my folder "work on", to stick to my folder to archive tips that did it, and windows in two copies of each of them - one where I had pasted it and other oddly in a separate folder completely in my archives. For some reason any Windows decided to put copies ghosts of several things in this folder without special report. So, if I change the files in a folder, they are automatically changed on the other; If I try to delete a copy of this file, it removes the two; and if I try to cut and paste the lot assigned folder and put it where it should be back (IE if there is already the original copy) Windows says it can't do that because the destination file matches the location of origin. I don't know how to remove these files has doubled up foreign, which create a lot of confusion trying to figure out where my files and which ones to change. I can't find any way or return of Windows to its appropriate classification system, including maximum until recently had none of these problems.

  Music library is not a folder, it's just a definition of research.

  Libraries are really just XML files that define search criteria.

  The real essentials you need to know is that libraries are not records.  They are really just a quick search of several places.  Try this: right click on the document library and select Properties.  This will tell you where the library is looking.  Whenever you open the document library, it performs an instant analysis of these places and tells you what he found.  Is not additional copies files, it's just search results. If you delete something, you remove the one and only original, everywhere where it is.

  You might ask "well, what's the point of a library?  I'm glad you (perhaps) asked.  The reason is you have a lot of places.  Take me for example.  I have some movies on my hard drive.  I have more moves on an extra drive (they will all take place on the main drive).  In addition, my roommate has a few movies on his drive.  With a library, I have a library of videos that research on all drives and gives me a single view combined all our movies instantly.  Now I can see all my films in my library at the same time, no matter which disc they are on.

  The files are not duplicated or moved, you see just a list of them, such as a telephone directory or the Google search results.

• During the ETG Table lock

  Hello

  I want to clone a table in our database. Version: 11.2.0.4

  
  Test case:

  CREATE TABLE test_1

  (IDENTIFICATION NUMBER)

  /

  INSERT INTO test_1 (id) values (5);

  COMMIT;

  Now-> I want to start cloning from the table. BUT! After cloning, I must write off line-counts of the original and cloned table. (simple audit)

  To avoid any DML operation during cloning I lock the table in exclusive mode.

  Test_1 in MODE EXCLUSIVE TABLE LOCK.

  -> Now I start the operation of the ETG

  -> DDL's implicit VALIDATION here

  CREATE TABLE test_clone

  AS

  SELECT * from test_1

  /

  -> DDL's implicit VALIDATION here too

  -> Here would be County-parts to start... (The Original County and County of Clone)

  Problem: My DDL statement makes two implicit commits-> first before the DDL and second after the DDL.

  So, in this case the lock on the original table will be released before cloning could begin. --> During a long race THAT DEC can other data manipulations arrive on the original of another session table.

  And in this case if I count the original and the clone table lines I can get a different result.

  Do you know a solution for this?

  -> I can't start a procedure or a second session-> This cloning is done in a DB-Patch which we deliver to DBA.

  -> I can only run an anonymous pl/sql block

  -> In fact, I don't want to use the INSERT INTO (append)... because an ETG is faster and I want to know if there could be a solution for this problem with the DDL.

  I thought to create a trigger on the original table that fires if a DML arrived-> but what happens if a DBA ends the script... then this trigger there. So, I would avoid this change in structure.

  How I could lock the original table so that I can run a DDL in the same session after it without to release the lock on the original table? -> I don't think that would work, but you may know...

  Thanks in advance!

  In fact, I wanted to know if if it was very important how it could be solved. -> In my case, it would have been good to get to know a solution said that maybe I don't know yet.

  A better solution IMHO and the most common way to do it is just put the table in READ ONLY mode.

  ALTER TABLE myTable READ ONLY

  ... do the ETG

  In general, there are many more controls to perform AFTER the operation than just the count of lines. These controls can should be performed by multiple sessions/users for an autonomous transaction will not help you here.

  Reading using only keep data available without him to be changed. You can then rename the original table to keep data online for a period of time or to allow time for it to be saved.

• missing iTunes in Add/Remove programs in the control panel

  I'm trying to uninstall iTunes on my laptop and when I go into the control panel by clicking Add/Remove Programs, iTunes is not listed, but it's always in the start menu and on the desktop. How can I remove iTunes, in order to remove the other five components?
  It's the order of apple support told me to uninstall iTunes:
  1 remove iTunes
  2 remove QuickTime
  3. remove the Apple Software Update
  4. Remove Apple Mobile Device
  5. Remove Hello
  6. Remove Apple's Application Support (iTunes 9 or later)
  I have things for steps 2 through 6 in Add/Remove programs in the control panel but not iTunes.
  Help please!

  Hello

  You can start uninstall with Quicktime and then check.

  See the article below for assistance. For more information, contact Apple support and check.
  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP
  http://support.Apple.com/kb/HT1925

  I hope this helps.

• Cannot access the control panel?

  I can't access the control panel or one of its programs in a newly installed Windows Vista Home Premium.

  I can't access the control panel or one of its programs in a newly installed Windows Vista Home Premium.

  This gives a try...

  Start button > in the search box, type appwiz.cpl > press the Enter key > column to the left, click on Control Panel

  Control Panel opens upward?

• Error, "Page failed to Load", while customizing the control panel.

  Hello

  I recently inherited a second hand dell tower which has Windows 7.

  Everything seems to have set up ok but when I go into control panel customization, I get the message "Page failed to Load".

  After having sniffed around, it seems that the Control Panel does not use a program that the computer recognizes.

  I went through various forums for the answer, but nothing helped.

  Any suggestions?

  Hello

  Thank you for the update. It is unfortunate to know that you still experience this issue.

  As you are facing the issue in the safe mode, as well as in the new user account, it seems that there is corruption of system files that cannot be replaced by the new file system. But, you can also try to check your hard disk for errors of the last step. Read the following article.

  Check your hard drive to find errors in Windows 7

  http://support.Microsoft.com/kb/2641432/en-us

  Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Please, try the steps above and update with the State.

  Thanks again for we keep posted!

• How to mark the physical tables as "cacheable"

  Hi all
  
  Can someone tell me please how to mark the physical tables as "cacheable".
  
  Thnaks a lot

  You can make cacheable table by clicking twice on the table or go to the properties of the table. You can designate specific time duration for the year, month, days need to keep cacheable. Remember do this on the base tables will affect all alias tables.

  Thank you
  Amol

• Save control table .cfg with knots of property.

  Hello!

  I have a façade with many (and I mean a lot!) boolean tables in tabs, and I want the ability to save the values selected by the user in a .cfg file, which will be used to make the same selection again without the trouble of clicking on buttons. The only controls that I want to save the value are Boolean tables 1 d of length 7 or 11, and these occur only on some pages tab. others have been setup so that their iteration a false criterion is satisfied and no code is running.

  I managed to get references to each control within each tab, and using a "more specific class' function to reduce it to only the controls in table. However, when this runs, pops up an error of "convert variant data" and use of a probe shows me the reference being called by my property at the time of the error node is to an INDICATOR array, rather than control. I thought that the node of 'controls on the page' and subsequently the control table class specifier would mean that references to other types of table would not make the real case where coming the backup configuration file.

  The indicator in question is a painting of a cluster of two strings and an array of strings, if that makes any sense / has no relevance, and the error occurs on the iteration 1 of the outer loop and the loop iteration 21 internal, corresponding to the control reference 22nd in the second tab.

  I hope that I have the problem clearly.

  There is a property called control? (or indicator?) This will help you sort out them.  I don't remember the exact name of the property, but that should get you close enough to find.

  Lynn

• Mobile based on the size and the position of the other table

  I have the impression that there is an easy solution for this... or it there is no solution at all... but here goes:

  I want to use table 2 to indicate 'total time' as the sum of all time in table 1. Table 1 is set to automatically filter some lines (basically, it creates a dynamic playlist based on certain criteria). What I wish is to table 2 'float' a certain number of Table 1 below, so that as table 1 grows or shrinks according to the filtered content, table 2 remains the same distance from the bottom of table 1. Is - this unreasonable? It seems I've seen tables 'hustles' other tables according to size changes (not the desired effect in these cases, but what I DO want to here).

  Hi mikey,.

  This seems to be the default behavior in Numbers ' 09, but the function may not have been included in 3 numbers. I'm sure someone will test and report on it before long.

  Demo below is in Numbers ' 09.

  

  Coffee table is a double to the top. After positioning the lower level of the original table, I inserted two rows in the original and watched 'push' that the lowest low, keeping the space between them.

  I reformatted the cells in column B, CheckBox and verified that a few of them.

  Then I opened the Reorganize pane. and the filter rule (see the lines "... ") displayed the value:

  By clicking on "see the lines...". "box produces this result:

  

  Note: I had selected all the header cells in column B before starting the filter. The first image was captured after unchecking the checkbox 'display lines... '. "developing the table and leaving only the cells in the (previously) selected filtered lines.

  As mentioned, the example is in Numbers ' 09 / numbers 3 behavior may be different.

  Kind regards

  Barry

• How to enlarge the size of print on a Mac?

  Inadvertently, I touched something that makes the pint on this browser too small to read. How do I re enlarge it?

  Your zoom controls.

  < control > + (more) expand
  < control > reduce (less)
  restoration of 0 (zero) < control >