enlarge the clickable area, a button

Similar Questions

• No matter where on the timeline are your buttons?

  I'm doing a site and I don't want some of the buttons to show all the time. So, for example, I have four text buttons with Actionscript Mouse_Over frames 1-40 on the timeline. 41, they left and four new buttons come into play. When I test the movie, the second series of reversals of the specified links to labels.

  I get this message "error 1009 to frame () 1. Initially, I had the same problem with the four top buttons as I had them appear on the stage at frame 3. After that I moved to frame 1, reworked transfers.

  So is it possible to hide the second set of buttons up to a specific time or should I start on frame 1?

  Is there a way you can view my Fla file to see if it's something I'm just? My Script is correct.

  I appreciate any help in this matter.

  Location of the buttons of the issues in the code that is associated with them must be where they are instantiated/required.  If you have code Framework 1 for the buttons, but they do not exist until the frame 2, this code does not work for them.

  You can control the visibility of the buttons by setting the "visible" property true or false according to the needs.  If you could have all the buttons of the first image, do those who should not appear until late invisible anymore.  Similarly, when you get to frame 41, you can make them visible and then hide the other four.

• Clickable area of the button problem

  Hello

  I use flash 8.  I am tiring to create a button consisting only of text, so when you test the movie the clickable area is that the body of the text, as I create in the top, most or the lower part of the State. So I draw a rectangle in the Hit State, but when you test the sound button always in the same quality.

  What can cause this?

  Thank you

  S

  You are probably using a selectable textfield.  In the properties panel, make sure that you have designated the textfield as not being is not selectable.

• Text block blocking the relaxation area

  Hello.

  I have a problem with blocks of text within a trigger (eg. widget ToolTip).

  What I've done so far:

  1. Insert the ToolTip widget.

  2 customize the trigger:

  2A. create a background (race up and down and a small point like a fill on the right side)

  2B. set a text block (smaller than the container of the trigger) inside the area of relaxation with text (placed in the middle of relaxation)

  2 c. oblige States to turnover etc for the textframe.

  3. overview in Muse and preview in the browser (Safari). same problem

  The clickable area / rolling worked only where there is no text. Means outside the textframe (but inside the trigger area stille), everything works fine (reversal / clickable).

  But as soon as the cursor of the hit of the text (even between the letters), mousepointer swaps to normal and you are anable to click more.

  4. has tried to organize the relaxation for the back (you can only organize the whole Tigger, not only the text inside block). Not working, it cause displacement the target order.

  What can I do? Is there one solution other than the use of a button in Photoshop?

  Any help is appreciated more than.

  Best

  Hoschi

  Hi Aish,

  I thought about it. The block of text was in the correct position inside the trigger. There was a group has above triggers, so it has blackened.

  Problem solved...

  Thx for your help and your patience.

  Hoschi

• Clickable area limited

  Hiya
  
  I'm on my first Flex project and I knocked against a problem that left me speechless.
  
  I'm loading in XML image file names then browse their view as a slide show. It works very well :)
  
  I also need to make those clickable images.
  
  The way I do it is that I have a picture (see code below) that I'm changing the source on. I have given up trying to change the attribute 'click', so I'll also put a variable that is called by a function on the 'click '.
  
  The problem is that the image (and the flash on the page area) are wide 1000pix of 220 high, but the clickable area is only on the first 225ish pixels wide but full height.
  
  I tried that just overlap the image on a button - this causes the same effect - the son of the button of the area (and can be seen) but the 'click' only works on the left side.
  
  More curiously, it seems to be the case when the page is accessed via http using the same html code (just a little simple that shows the flash).
  
  Any ideas?

  Thank you for Gah - you helped a lot by cofirming that he was probably just doing me something stupid!
  I copy an object below the image that has been showing, filled with info from xml (and so pre-loading of images) and when I have 'stored' that I was, of course, he put on the area in front of my image. A former test cause this setting be compensated.

  So - yes I was hiding it behind something else.

  Thank you once again - you set me on the right path :)

• I do not have a button of the Firebox above the window of firefox. have tried to reset as do not have the toolbars. I have a right-click in the toolbar area-no options?

  Tried to add a menu toolbar or a toolbar of bookmarks. No options appear only when I click right in the toolbar area - or not to hide the toolbars. It was suggested to reset firefox by lowering a window by clicking the firefox button in the upper left corner. I don't have such a button. I'm frustrated and going around in circles. Your video on toolbars does not run. Pretend he does, but does nothing. I'm a Firefox user for years without any problem. Browser Firefox has diverted and unable to solve the problem because access is really a challenge. Avast suggested browser cleaning & even though it disappeared temporarily he returned. So I uninstalled Firefox and spent my allegiance to Google Crome. Favorite browser Firefox, however then reinstalled - and here I am. At the present time - not a satisfied customer! I'm running firefox on a Windows 7 operating system. I would try reinstalling but have already imported by bookmarks in Crome - this could be a part of the problem? Shouldn't be, I think. Thanks for any help.

  You were probably in mode full screen, if you had the ability to hide the toolbars in the context menu.
  
  You should also have seen the choice of exit full screen in this context menu.
  
  As reported above, pressing the key F11 will also toggle / disable mode full screen.

  • https://support.Mozilla.org/KB/how-to-use-full-screen

• Buttons on the Panel are not more enlightened

  Buttons on the Panel are not more enlightened. How can I solve this?

  Enter the parameters of the BIOS (F2 at startup) and under Advanced BIOS options you will find LED illumination. Set it on, save the BIOS settings and restart your laptop.

  Does that help?

• My button mute in my launch buttons fast remains red when the speakers are not dumb.

  I have a Pavilion dv7-3165dx with win 7 Home premium pre-installed, and recently, I noticed that my button mute in the quick launch buttons stopped to change to white when the speakers are reactivated. I tried to install the latest drivers for the buttons to quick launch, which did not work. Someone solved a similar problem (button remained white when cut) by installing something, it calls the Total of HP Advisor and his advice, but I can't find the program.

  IF what I post solves your problem, please, click the button 'Problem solved' on my post.
  Oh, and if I helped you, by clicking on the star of "Congratulations" on my post would not hurt my feelings ether.

  Hello

  Try download and reinstall the IDT Audio driver on the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48830.exe

  Once installation is complete, restart the computer and see if it has no effect.

  Kind regards

  DP - K

• There are 4 buttons on my Aspire 5100 key board above right of the ower button.

  On my keyboard, there are 4 buttons to the right of the key power and lights...

  Looks like 1.Mail, Globe, 3.a 'P' 2.a, 4. a 'E '.

  How to use?

  David

  Thailand

  [under the direction of privacy - please do not share personal or unique information]

  OK

  I found the right program thank you for your help!

• Horizontal size of the taskbar button is too small, as if there are several buttons, he the overcrowding.

  I downloaded a program called Styler which changes the appearance to look like Windows 7 or Royal themes. It worked fine for the first days, until that day when my laptop could not start after hibernation, so I hard-rebooted, and the horizontal size of the taskbar button is too small. I tried to restart, change the appearance back, locking/unlocking/resizing of components of taskbar. I wish I could send a screenshot. Yes, I have these vertical bars displayed and all, and no, they do not change it. I use as a separate program called AlienGUIse Alienware, which has not had a problem in 2 years, I got it, and it didn't fix it either.

  Why I say that it is as if there are many buttons clutter is the "group similar taskbar buttons" function. I figured out how to put the picture of the problem in my profile to do this, click on it.

  Someone has replied

  a system restore point worked!

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• Microsoft PAINT - how can I amplify a drawing are in paint, enlarge the concentration of pixels?

  Microsoft PAINT - how can I amplify a drawing are in paint, to increase the concentration of pixels?

  Hi Uuj112,

  Concentration of the pixel depends on the quality of the image. If the image quality is very good, then you might be able to enlarge the picture with good quality.

  You can try to resize the pixels in Microsoft paint. Try the following steps.

  1. open Microsoft paint.

  2. click on the Home tab > resize

  3. click on Pixels and trying to adjust the horizontal size of the image.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why are there "No content found" even after updating the Guide on WMC. I also note that, on the main page of ITV, none of the links are clickable. What gives?

  I removed and re-installed Internet TV for my Home Premium from windows system 7 several times, using an account administrator as well as a standard user account. I find that the ITV homepage is NOT clickable; the links don't point out even when I hover over them (top tv, full episodes, etc.). I also click on an icon of TMZ in alternation, which, once clicked active active search at the top right of the screen button, but when I opt for the Internet TV within the open window radio button I've always found "no content found. Does anyone have an idea here? Confused in Maryland.

  Microsoft has removed Internet TV in Windows Media Center effective 9/20.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

  We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

  kathleenl62675526 wrote:

  Hi Tanuj,

  There is no place to change fonts.

  You must go to the LR Edit (or Lightroom on Mac) menu > Preferences > Interface > choose 'Options' in the menu 'panels '. There should be a setting for the font size of Interface. You will need to close and restart LR for the font change are taken into account.

• I'm new to Lightroom CC.  It's always like that?  I click on the button import in the library module.  All the pictures shown in the display of the grid are blurred.  They are very well in simple mode.  My file extension is NAVE.   How to fix?  Any help p

  I'm new to Lightroom CC.  It's always like that?  I click on the button import in the library module.  All the pictures shown in the display of the grid are blurred.  They are very well in simple mode.  My file extension is NAVE.   How to fix?  Any help please.

  Our team is already working on this, and there will be an update to Lightroom soon with previous import window.

  During this time I ask you to please you back to the previous version of Lightroom:Instructions to restore an earlier version of update