Ensure the mobility Client Certificate Problem | CEP-transfer-url

Similar Questions

• Firefox Mobile has a kind of key store? How to import the SSL client certificate?

  Firefox Mobile has a kind of key store? How to import the SSL client certificate?

  There is no built-in way to add client certificates to Firefox for mobile. We hope to add this in a future version.

  See this previous question for some (kind of complicated) ways to add client certificates in the current version of Firefox for mobile:
  https://support.Mozilla.com/en-us/questions/786035?s=certificate & As = s

• Install the MDW and the mobile client on the same platform

  Hi all

  We implement our 11g Oracle Database Server from Mobile environment and I was confused about something I read in the Release Notes (http://docs.oracle.com/cd/E22663_01/doc.11100/e22675.pdf).  In section 3.2 says 'do not install MDW and the mobile client on the same platform.'  Did mean really say 'platform' or does really do not install the MDW and the mobile client on the same device?  We are a store of Windows 100% - the mobile server is installed on a Windows Server machine, we plan to develop with Workbench Mobile database (GMD) on a Windows 7 desktop PC, and we intend to run the client mobile Windows 7 tablets. The Release Notes say that I can't do this?

  Yes - the way it is written is a bit confusing.    We will correct it in the next version of doc.    What we were trying to say, is do not install them on the same system.    Thank you for this comment.

  Kind regards

  Mike

• Just improved 5.0 to 6.0u2 vcenter.  How do eliminate you the web client certificate error?

  We were a vSphere 5.0 shop for many years and enjoyed the client c# 4.0, 4.1 and 5.0 then days.  We just upgraded 6.0 Update 2 this week and although always, we are primarally used to the c# client and will use it for a while to come, I am getting used to the web client for the new features that are available only in it, such as SRM and VR.

  I was able to click through the numours of screens of reminder to get via Firefox after all these certificate warnings and even easier just click the one or two things in Chrome or IE to get in.  But how could eliminate total certificate errors?  Example, now I'm with Chrome, but the https:// in the address bar is red with a slash through it.

  In most all other device based on web or connection we have, as HP iLO, Dell iDrac etc... usually, we create a CSR on this device and it present our internal Windows certificate authority and recover a file to go back to the device.  Is it possible to do this with the web client?  We have a certificate of 'Server Web 2' model that generates the sha256 return certificate and inherently all field devices to trust him because the area is important our root certificate authority.

  Also, we are running services such as replication vSphere and SRM, I would not change certificate affects only or same vSphere Update Manager.  We have two sites HQ and DR.

  I ended up getting rid of the cert errors by following this page: 6 replacement vSphere SSL certificate / implementation by using the Certificate Manager-automation tool

  I followed the procedures for "Certificate of Machine (Reverse HTTP Proxy) replace with certificate custom" and just that.  I didin 't' t mess with root VMCA with custom signature certificate certificate because its seems to me like he wanted to do an endless number of the signature of the certificate request and keys.  But the first option considered for our internal Windows CA took care of her.

  For replication of vSphere 6.1.1 that I had to turn off the virtual devices from replication via customer web vSphere vSphere and then put them back on.  Then connect to their URL of web management (port 5490) and make the reconnection to the vsphere on the connection tab, where he was invited to accept the new certificate.

  For AUVS I had to run the VMwareUpdateManagerUtility.exe under C:\Program Files (x 86) \VMware\Infrastructure\Update Manager and to the third option of re - register to vCenter, and then restart the service.

  Surprisingly, SRM sites remained paired although I've read that some people have trouble with it.  I'm on 6.0 update 2 and I think one of the questions was fixed in 6.0 Update 1 b.

• The GMail Contacts syncing doesn't transfer URLs

  Synchronization with GMail transfer URLs, y at - it a tirck for this or is it just a bug?

  BTW How do send you a bug report? It doesn't seem to be any formal mechanism to achieve this. Palm should add a Bugzilla system.

  If you want to see additional synchronization between the contact fields, I would recommend this asking devs to www.palm.com/feedback where we monitor applications to client new features and improvements.

  TreoAide

• Client certificate SSL V3.0

  How can I connect to a web service that requires client certificates SSL V3.0 using CFMX?
  
  I am trying to use a client certificate to connect via CFHTTP a secure Web site and I'm getting a "403.7 - Forbidden: certificate customer required" error. I have correctly installed the Web site cert by following the instructions here:
  http://www.TalkingTree.com/blog/index.cfm?mode=entry & entry = 25AA75A4 - 45a 6-2844 - 7CA3EECD842D B576
  
  When I access the secure site using IE, I am asked to use the installed client certificate, and then I'm able to view the content secure without no 403 errors.
  
  After completing the research question, I read in this post that CFMX7.01 does not support the SSL V3.0 protocol:
  http://www.houseoffusion.com/cf_lists/message.cfm/forumid:4 / messageid:229870 / step: 0
  
  Did someone using client certificates SSL V3.0 with CFMX7.01? Is it a question of Adobe or java problem? Are there alternatives?
  
  

  CFX_HTTP5 worked great!

  I wish just called him 'good '. I asked the question about a popular mailing list and got absolutely no response. I also searched Google for a few hours and did not find anything. CFX_HTTP5 did the job and now I can finish what I started instead of saying my client I found a mission critical issue that ColdFusionMX couldn't do.

  Thanks again!

• BlackBerry Facebook Z10 z10 Mobile client

  Facebook behaviour seems to have changed from this morning: at the start of the application, I get a message "no narrative not returned."  I tried a reboot hot, cold with the app restart reinstall nothing helped.  Then I came across of workaround: sailed 'Account settings' and selected in the main menu of news while there and the news feed seems OK but with a size smaller than before.  A maybe something changed on the Facebook site?

  Found the solution on the Crackberry forum - a friend of mine to the display of a link to "books I've read" caused the mobile client BB10 to blink and return to Nada.  The solution is to hide the post incriminated in the version of the browser to Facebook and then the app BB10 is happy - took me a while to find it!

• How to download the mobile version to the Web-host Business Catalyst

  The tutorial Adobe on a mobile edition shows how when downloading Business Catalyst but not to another Web host. If I download my mobile version for a 3rd party host, the mobile user will be directed to the mobile version? If so, how? The mobile version will have a different URL?

  Hello

  Yes, the site would be automatically redirected to the mobile version, the url will change phone version which would be www.domain.com/phone/index.html

  These links include more information:

  http://helpx.Adobe.com/Muse/using/creating-website-mobile-devices.html

  ml http://www.lynda.com/Muse-Tutorials/Publishing-testing-your-mobile-site/129004/143914-4.HT? vid = 6 & fatoc = 1

  Thank you

  Sanjit

• ANyConnect Client certificate authentication and verify the Client against the Microsoft AD using DAP via LDAP domain membership

  Hello

  as described in the title one want to connect with AnyConnect Secure Mobility Client 3.0.2052 ASA 5540 Version 8.4 and licence Premium SSL.

  Customers using Maschine certificate to authenticate to ASA. It works very well.

  Now, I want to install a DAP to check the customer against the Microsoft AD using LDAP. I have configured the LDAP server in see ASA:

  AAA-Server LDAP protocol ldap

  AAA-Server LDAP (inside) host ldap.com

  LDAP-base-dn DC = x DC = x, DC = x DC = com

  LDAP-scope subtree

  LDAP-login-password *.

  LDAP-connection-dn *.

  microsoft server type

  I see that it works if I test via the testbotton server in ASDM and I also see in CLI "debugging ldap 255". But if I configure in DAP: AAA attribute ID:memberOf = Membre_domaine I can't see any request to the LDAP server as I try to connect with the Client und does not correspond to the DAP.

  No idea where the problem lies?

  Thanks in advance

  Hi Klaus,

  DAP will not make any call LDAP itself, it will only act based on the attributes received LDAP via the LDAP authentication or authorization.

  So you will need to enable the LDAP authorization in the tunnel - or connect to groups.

  Once you have, you can either use DAP or a map attribute LDAP for accept/deny access, see the example of these two methods.

  HTH

  Herbert

• How extract/export a client certificate of FF mobile?

  I created an account for StarSSL of my Android device and a client certificate has been downloaded/installed in the mobile browser.
  Now, I tried to save this cert to my desktop Pc. After searching a lot about this, I found out how to copy the files cert9.db and key4.db on my PC, but now I don't know how to extract the certificate of the files. Using the command:

  certutil k d sql:.

  shows something like:

  certutil: check the chips 'certificate of NSS DB' slot 'private NSS user key and Certificate Services.
  RSA < 0 > < some long letter/digit ID > < Email address > s ID StartCom Ltd.

  Now, I know I should use pk12util to extract the key, but the command:

  Pk12util o ~/cert.p12 - n '< ID from the top >' sql d:.

  Displays the following error:

  Pk12util: find the Pseudo user certificates could not: PR_LOAD_LIBRARY_ERROR: failed to load dynamic library

  Thank you very much for help and keep excellent work with mobile Firefox (and office)
  Greetings,
  tuxflo

  Resolved by myself, the solution is not to enter the ID of the certutil command, use name instead of the certificate:
  SQL d Pk12util:. out.p12 - n o 'ID < mail_address > StartSSL Ltd.'
  After you enter the password twice, I had the certfile out.p12 in the current directory and could import on my Firefox on my desktop.

• Problem installing Client AnyConnect Secure Mobility Client 3.0.3054

  Hi all

  This is my first post and I hope that someone can help me with my problem.
  I'm trying to install the Client AnyConnect Secure Mobility Client 3.0.3054 on my PC (Windows 7 Professional 32 - bit operating system) and
  I get the following errors.

  Cannot install the Client AnyConnect Secure Mobility Client 3.0.3054 with the Installer error: fatal error during installation. Cannot establish a VPN connection.
  The acsock service failed to start due to the following error: a device attached to the system does not work.
  Please notify.
  Thank you.

  Anna,

  I had the same problem. Have you found the solution in some way?

• I can't transfer files flv to mobile to the computer, when I tried to transfer the file, a dialog box indicates that the file is opened in the Media Foundation Pipeline. Exe

  I can't transfer files flv to mobile star Samsung Galaxy of the computer, when I tried to transfer the file, showing a dialog box indicates that the file is opened in the Media Foundation Pipeline. Exe

  Discussions were merged.

  Deleted duplicate.

  Hello Arun,

  Thanks for posting back.

  If you have successfully transferred your files and they are stored in a location on the hard disk, that is, in a folder or drive on your computer, they will remain on your computer, regardless of any number of reboots.

  Hope this information is useful. If the problem persists, please post back for assistance.

• AnyConnect Secure Mobility Client, the Module of access network, wired PEAP

  Hello

  I tested AnyConnect Secure Mobility Client, Module of access network as supplicant with PEAP authentication for wired network users. With the default configuration it works well.  With the default configuration is to trust the root CA certificates installed on the operating system.  Do you know how to set up NAM that it will validate certificate ACS with specific root CA certificate?

  In the profile Module of access network Editor, there are two options on the certificates:

  One is trusted certificate authority which has two options by its self first is too trust any certification authority root certificate that is installed on the operating system and the second is to import root CA certificate in the profile. Potentially second option can help in my case, I can manually import certificates of CA root in each profile. But I think it will be difficult to update root CA certificates in the future in this way.

  Second is Trusted Certificate Server rules, this option have corresponding capacity in certificate common name.  For what can be used this option?

  Capture screen I have attached included the path to the exported root CA certificate. What I did was the Root CA certificate to export to a file and include that cert in the profile (it's manual CA supply directly via the profile editor).

  If you have already added the CA certificate root in the trust store client certifcate through a Group Policy object, you can select the other option "Trust root certification authority installed on the operating system", which will work fine.

  If you do not have an internal root certification authority to issue the certifcates and rely on self-generated certificcate ACS management and for EAP authentication, you need to include the generated certificate locally each device in order to have the confidence of the customer the CSACS device.

• Zero error of the client certificate provided is not rooted in the devices certificate store after upgrade to the Horizon view 6

  We have just updated our infrastructure VMware View Horizon of 5.3 to 6.0.1 and all zero clients are provided certificate is not rooted in the devices certificate store.  The certificate on the brokers of the connection has not changed.  Customer relationship connections Horizon view a connection, as well as when we connect to the connection to the server via a web browser.  We had no cert errors before the upgrade.

  You need to add the following as PEM files to fix the problem on the zero client.

  The intermediate certificate - DigiCertCA.crt

  The root - TrustedRoot.crt certificate

• JAX - WS: how to choose among multiple client certificates on the fly?

  I have a webapp that calls a web service provided by a supplier. The seller requires the use of client certificates for authentication, and with success, I called their service using the keystore PKCS #12 they gave us with JAX - WS 2.2 using code like this:

      System.setProperty("javax.net.ssl.keyStore", "myKeyStore.p12");<br />
      System.setProperty("javax.net.ssl.keyStoreType", "pkcs12");<br />
      System.setProperty("javax.net.ssl.keyStorePassword", "password");

  The problem is, my webapp will support multiple profit centers, and the seller makes a distinction between our business units by issuing separate certificates for each. So I'm faced with a dilemma: I have four PKCS #12 files, one per unit of my webapp, and business will have to decide which one to use when running. In addition, this webapp could be highly used by many concurrent users, and therefore more than one of the CERT can should be used at the same time. So whatever the solution is, it must be thread-safe.
  
  I was able to combine all four certificates in a single key JKS file using the JDK 1.6 operation "keytool - importkeystore ' with each of my four certificates PKCS #12, so I have now all four in a single JKS keystore. The above code would be this:

      System.setProperty("javax.net.ssl.keyStore", "myKeyStore.jks");<br />
      System.setProperty("javax.net.ssl.keyStoreType", "jks");<br />
      System.setProperty("javax.net.ssl.keyStorePassword", "password");

  So my challenge now is to select between the four possible certs program during the call to the provider's web service. How do I with JAX - WS RI 2.2?
  
  Thank you
  Bill

  1.6 I think you can set a default value for custom SSLContext. So you do that and equip with a customized KeyManager you can control outside to ask what keystore alias to use.