Entered in initialization Mode

Similar Questions

• the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  Hello

  · Were there any changes made on the computer before the show?

  You can check the link: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

• Impossible to enter in recovery mode

  I use a rooted Xperia SL and I can't enter into recovery mode. I was running on pre rooted Doomlord Stock JB ROM for Xperia S and Trinity ultimate core. The problem started when I tried to flash sound improvements and Walkman app from XDA forums.
  After he flashed and I restarted my phone, my phone just kept restarting without being able to get to the home screen. So I went to TWRP screen and I reflashed the JB ROM. Now, even if I Flash using Fastboot recovery, I am still unable to get into recovery mode
  I tried to use goo.manager but still no luck! The rom works very well and it is prerooted and I can use it to work normally, but I'm not able to enter in other applications-Flash recovery
  Help, please

  Make sure that the recovery is compatible with the rom and kernel, you have on your Xperia

• Can not enter in the Mode of recovery to Neo V... Help, please

  HII friends... I anchored my Xperia Neo V a few days ago and flashed with ClockworkMod...

  The problem is that I can't enter into Recovery Mode via ROM Manager or QuickBoot
  When I click on reboot into Recovery its just restart the phone... So kindly help pleaseee

  Forst, go to MCG app and select install MCG (if not done before). Now, turn your unit off and restart it, as soon as you see blue LED, press the home/menu/back key

  See if you enter MCG

  If not then I must assume that you have installed the wrong MCG

  The app is different for Neo V

  http://Forum.xda-developers.com/showthread.php?t=1364509

  Install this app from above, after you install it, go to app MCG > select Installer MCG > fact

  Now restart your device

  as soon as you see blue LED, press home/menu/back key

• P2715Q - flashes "Entering Power Save Mode" all 35 sec while the SP3 is asleep

  Configuration: Windows 10, Surface Pro 3, CDM--> DP on P2715Q cable

  As soon as the Surface goes to sleep (OR the operating system turns the monitor off after X minutes), the P2715Q says "Entering power saving mode"... and then made... and then 35 seconds later turns to say "Entering power saving mode" again... and then just a loop like that again and again like clockwork.  It's really annoying when you try to sleep and keeps it light up the room.  : () o

  It only when the Surface is turned off or in hibernation... only when he is asleep (via timer or manually) or the displays turned off after X minutes of inactivity.

  Does anyone have any suggestions how to solve the problem?  The defective monitor or is it more likely to be an OS/driver/firmware/other problem?  It is brand new and previous ViewSonic monitors did not do this.

  Thanks for any help!

  This message means that SP3 is always ping monitor. So this "mode" is not really sleep. First, run all the SP3 updates. Restart and test again. If it still does not, post on the Forum area to get their thoughts.

• "Enter power saving Mode.

  Hi guys. I have a desktop HP and Dell SR2320L monitor. It was working fine up until a few months back. I was in the city, came out the week last back and now whenever I start my PC there just here "Entering Power Save Mode. I tried almost everything that the search for a solution to the problem, but won't work. Is there a way to check if the cable is the problem or the monitor or something else? Any help will be much appreciated. Thank you.

  Ankur

  Hi John,.

  Monitor can enter save mode, when it does not receive enough power for its energy operations. If the monitor is the cause, you can try to put the cable from the monitor and make sure that the connections are secure. You can also try to swap the ends of the cable and see if the problem still occurs. Another step, try is to use a known good cable and see if the problem persists. If so, as a last resort, you can try to reset the default monitor. For more information on this, you can consult the manual of the monitor: http://bit.ly/10ErgRX

  Another possible cause of the same question could be video drivers on your computer. You need to maybe uninstall and reinstall the video drivers and you can see the power options in the operating system. You may need to check the HP website for the download and installation of the video drivers (relevant for system model).

  Please share the findings.

• cannot enter in the Mode target Mac 10.10

  Hello

  I'm running OS X 10.10 and 10.9 of VMS in Fusion. When I try to enter in the Mode target system-> startup disk preferences, it has no listed target Mode option. And I can not enter in T-mode T pressed to start upward.

  Any ideas?

  Thank you!

  Hi ITMan01,

  Target disk mode is a feature provided by the firmware of the Apple system and does not part of Mac OS X.  We don't currently implement this feature in our virtual machine firmware, so target disc Mode is not available in a VMware virtual machine.

  Thank you

  --

  Darius

• A satellite series will not automatically enter hibernation/standby mode

  This feature to work on my laptop, but at the time (maybe 6 months), he started this problem. I don't remember any significant incident they coincide at the beginning of this problem. The computer will enter either of these modes and works fine if I manually turn them, but I can't put it so that they enter these modes automatically after a period of time. I tried to change controls for both the Toshiba utility and Panel options screensaver standard windows, but neither worked for a while. Any ideas?

  An application may be preventing the laptop to enter the Hibernate?

  I remember that PowerDVD did this on my laptop, so close all applications you can, then try again.

  If you have no luck, you may need to run the recovery to reinstall Windows.

  Also try a BIOS update.

• My computer restarts even I enter in safe mode

  My computer always restarts even if I enter safe mode and other options.

  When I choose an option it loads but the screen becomes blue with letters inside, after 1 second it restarts again.

  The computer will start up again.

  I tried to put the CD in Windows Vista but the installation does not appear.

  Please help me.

  Hello

  Try to disable the auto restart and display the error message for this will help us to work on the resolution.

  To disable automatic reboot of the Advanced Boot Options.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  In the meantime, try to perform the Startup Repair.
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Let me know if this helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• HP LJ MFP M425dw 400 does not wake after entering sleep / Auto mode

  Hello

  After you have installed the latest version of the firmware 20140521 (May 21, 2014), the device is not trampled after entering sleep / Auto Off mode.

  The configuration of the device and save the settings listed below.

  Tell me how to solve this problem?

  

  

  It could be a hardware or a firmware related issue.

  You try to perform a reset of the base unit and also try to send new firmware.

  The device may need to be tested with additional troubleshooting steps, so I would say to make an appeal for support through your regional HP Support channel.

• BlackBerry 10 directly enter the operating mode

  HY all

  Knows anybode here, if I can directly enter the Mode of operation to 10.3 BB? Now, I need to pass manually each time in work mode. Wehen I unlock the phone, I find myself in personal mode. It's not really a lot of work, but not on my nerves...

  aplboy

  Hi @aplboy

  An option to automatically switch to the run mode when the device unlocking is not possible at the moment.

  Since then, it the case, I'll pass along your comments for further review.

  Thank you!

• WINDOWS 8 enter "the sleep mode" and not to wake up, necessary reset.

  PC:Samsung np530ub
  OS: Windows 8 pro x 64

  What happens, laptop in sleep mode: off of the screen, drive hard light stop, Dungeon of light wireless on, seeing power keep on... Press the power button to wake the computer nothing happens. have to hold the power button to reset the machine.

  It happened once in all, but now is every time. Cleaning of the NET solution... nothing has worked

  what I've done so far:

  updated drivers

  windows update

  bios update

  turn off wireless and bluetooth
  activate usb bios s3
  the powermagement on devices tab
  power management - see if any device in the way of fashion is "Eve". powercfg-applications
  powercfg - requestsoverride driver \FileSystem\srvnet system
  check the multimedia device sharing (disabled)
  hybrid mode (off)
  disable the fast startup (disabled)
  Powercfg - devicequery wake_armed (return NONE)
  for now I have disabled the quick start and "sleep" mode...

  Hi Leo,

  We appreciate your efforts.

  Have you updated the drivers from the chipset on the computer? If this isn't the case, I suggest you to update and check if it helps.

  Step 1

  Run the electrical troubleshooting and check if it helps.

  a. press Windows + W on the keyboard.

  b. type Troubleshooting in the "search" tab and press enter.

  c. click show all on the left panel.

  d. click Power, will new popup window.

  e. follow the instructions on the screen.

  Step 2

  Delete the current power management and create again.

  Check out the following link to change the plan of power to your needs.

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  See the section: how to create and delete a power plan

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• When I press Ctrl enter in library mode, see a video of selected images...  I get an error message that says that the video is

  When I press the Ctrl Key and the Enter key, in library mode, to see a slide show of images that are selected... I get a window error that says "Lightroom - video support is not enabled.

  I can see regular video located in my catalog and other videos on the internet... very well.

  How can I 'activate' or turn on video?

  I've recently set up a second monitor and I don't know if this has had an effect...   But, I can't view slideshows even with just my phone on and the second monitor goes blank...

  Its a confirmed bug.   See here.   I wouldn't guarantee a quick or any difficulty considering Adobes bug of history setting. (not good)

  Video Support is disabled. Lightroom forums

• Operations to exhale when you enter the Maintenance Mode

  Given that we have upgraded to Esx 3.5 version, we noticed that when a host server between maintenance mode there are always a few VM that will not migrate due to operation Time Out errors.  I don't know where is the problem, but I was informed that if I cancel the mode entry maintaining, I can manually VMotion virtual machine off the coast of another host without any problem.

  Everyone knows this?

  ________________________________

  Jason D. Langdon

  Upgrade to 2.5.0U3, that should fix the problem

  http://www.VMware.com/support/VI3/doc/vi3_vc25u3_rel_notes.html

  Migration of virtual machines are not recommended when the ESX Server host enters the maintenance or Standby Mode

  Do not perform a migration of virtual machines completely automated out of a host in maintenance mode or standby mode, if the level of VMware HA failover is violated after that the host is in the required mode. This restriction applies if strict HA admission control is enabled or not.

• How to enter in recovery mode in El Capitan?

  The way I did on the previous operating systems was hold cmd + r, BUT now if I do this, he sends me to the recovery of the Internet Mode instead which as far as I know, must only show when I press cmd + option + are so I'm confused, what is the new way to get into the recovery mode and not the mode of internet recovery on El Capitan?

  If the recovery partition is not available on your machine you will be automatically mixed with the recovery of the Internet.