A satellite series will not automatically enter hibernation/standby mode

Similar Questions

• Satellite P100 will not stay in hibernation mode

  Hi everyone ~.

  Satellite P100
  Vista

  Before going to bed, in that I always put my computer in hibernation. He won't stay in hibernation mode. I don't know fashion 'sleep' here.
  I click on the Start button and then choose put into hibernation. It goes into hibernation and I go to bed, so I don't know when it will come out of hibernation.

  I used to have to press the power button, get up and running after his hibernation. Along the front of the computer are 5 blue lights. I'll call them a, b, c, d and e.

  d & e are usually off when I use the computer.

  a, b, and c are on when I'm on the computer. When it goes into hibernation mode b turns off.

  When I get up in the morning a, b and c are all back on and everything that I have to do is move my mouse around then newspaper instead of the first press of the power button.
  I have a few scheduled tasks, but I've always had people.

  Help, please. Is there a setting that I can do to take care of this problem? TIA

  Hello

  Have you noticed the same thing with the mode sleep too?

  Anyway, check it please Windows Update option and disable it. Click the settings (left) and make sure that the first option install updated is automatically disabled. Maybe your laptop starts each day at a time and try to do the update of audit.

  Test it!

• Satellite L300 will not start even in safe mode

  Hello.

  Whenever I turn on my laptop, it shows me two options: start windows normally or perform a system repair.
  I tried both of these options, but I can't seem to access the page where I have to enter my password to access my desktop, I tried a number of things by pressing F8 during startup, including startup repair up to and restore to the previous point, but nothing happened.

  I have the vista operating system and it seems to freeze immediately after loading (the long rectangular bar with the Green thing from left to right, saying Microsoft Corp. below). It freezes... the page is all black and my cursor is there, I can move the cursor, but nothing is there to click on. HDD/ODD lights do not Flash indicating that the laptop is not all 'work '.

  In addition, it took me to a page where he was "collection of data for the crashdump"... don't know what this means but yes and it also took me to a page where it says 'one of your disks should be checked for consistency. He also posted a message saying that the registry file failure does not load. Systemreboot/System32/config/system

  I start it in safe mode and it shows a bunch of files and says please wait.
  After my computer goes on a blank page (all black) but I can see and move my cursor and it is bigger than usual so I guess he's about to go to safe mode, but just, he remains on the screen and does nothing else.
  He was about 35 minutes and it's still at this screen, that nothing has changed.

  Thanks for your help :)

  Hello

  Try to recover the device by using the drive HARD recovery option.
  I hope you didn t change anything on the HARD drive recovery partition.
  HARD drive recovery allows you to reinstall the operating system without the use of all disks!

  Turn on the device, press F8, choose repair my computer and choose the option to drive HARD recovery.
  Usually, it would begin the new installation of the OS. But note; HARD drive recovery option would be to format the whole HARD drive, which means that you will lose all files stored on the HARD drive.

  Welcome them

• Portege z30-b-14z 10 Pro 64 bit will not be in hibernation

  Dear all,

  My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.

  I can not hibernate through the following methods:
  1. click on 'Start', 'power', 'Hibernate '.
  2. press x and windows, click on 'Close or disconnect', click on 'standby '.
  3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".

  Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.

  Well want to can someone help?

  See you soon,.
  Bender22

  Dear all,

  There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.

  I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.

  Can anyone help, because Toshiba cannot.

  See you soon,.
  Bender22

• Satellite L300 will not let me connect

  My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen

  Help!

  Who knows what's the problem here?
  Maybe you should install new OS. You can enter boot options using F8 at startup?

  Repair my computer option is available?

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Satellite P200D - will not read the Memory Stick Pro duo adapter

  Kia Ora
  My Satellite P200 will not read my Memory Stick Pro Duo adapter, both brand Sony.

  I am running Vista Home Premium. SD cards are read OK.
  The adapter works fine in my PC running XP Home premium. I tried two cards different pro duo. Help, please!

  Hello

  I think you should consult your user manual because this type of card is not supported:
  + Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. Do not insert the Memory Stick Duo/PRO Duo into the slot. Data lost or damaged if you use one card other than those supported. +

  Do you have more questions? ;)

• Envy 14 will not be in hibernation

  My machine Hibernate not reliable. It seems very similar to this post on the machine is not in standby mode:

  http://h30434.www3.HP.com/T5/lockups-freezes-hangs/envy-14-not-going-to-sleep/m-p/321738#M3895

  At work, I have a Kensington universal docking station which has a Display Link USB graphic adapter card / VGA connected.

  When I unplug the Universal Dock the laptop do not hibernate. When I leave it plugged in it will be in hibernation.

  After hibernation, neon House, start the system and trying to Hibernate (no dock at home) the laptop will not be in hibernation.

  When the laptop is not hibrnate the following occurs:

  The screen turns off.

  The hard stills in car and the fan is going.

  The key backlight still works (I can toggle keys market).

  I waited 10 minutes the machine put into hibernation without success.

  I went through the event log, a step seen anything related to that.

  How can I determine the cause the machine to crash during hibernation?

  Thank you

  Pei

  Hibernate worked sometimes, so this isn't a problem with it being disabled.

  I've upgraded to the latest version of the BIOS (A F.13) and now it works.

• My computer will not automatically updated, even if it is enabled. I get the error message #0 x 80070424?

  My computer will not automatically refresh. I went to ensure that this automatic update is on and it is, but it won't let me update. Whenever it comes up with error #0 x 80070424. Is there a way I can fix this or do I need to take it for repair?

  Hi DebbieVondervoort,

  You did it of any material changes or software on the computer before this problem?

  This problem occurs if a service that is required for Windows Update or Microsoft Update is not registered.

  You can follow this link and check if the problem persists.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424

  Hope the helps of information.

  Please post back and we do know.

• Windows 7 - date/clock will not automatically be synchronized with the internet time

  Windows 7 - date/clock will not automatically be synchronized with the internet time

  Please help me solve this problem...

  every time I can't manually change the date and time...

  If the time server internet will not synchronize the clock, select 'Change settings' and choose a different time server from the drop-down list.

• print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  I have a printer HP psc 2510 series deskjet.  Print many documents, it has notified me that I was low on ink which I was aware of.  I had a little more what to print, and chose the young project option for printing of no more than 1 to 3 pages.  I constantly tried to cancel the job that kept the origin of the printer show (not answer).  It aligned to the top other jobs, but after trying to delete all, printer then turn on again, it still shows the original print job, and I'm unable to find a way out of Quebec

  Verification of updates, there are only two listed as "optional" still thought by downloading them, it can solve the problem.  It does not; He gave the error message on the print job in that causing a feeling of power.

  I've never seen this before; I was always able to plug & play on my desktop printer and trying to use it on my Sony VAIO VGN-NW310F series.

  It is imperative to get this resolved.  School assignments are due and professorts not only does not want to hear the excuses of any kind, printing problems have always been easily resolved so far.

  Please - I need immediate assistance.  I already used the troubleshooter printer online which, as said earlier custody indicating the print job to Québec, is causing the printer to not answer.  I cancelled each time, but it will not go away.  I turned off the printer, reinstalled in the hope it would be empty, but it will not.

  I appreciate your atttention guest on this subject.  I work with Windows 7 Home Premium 64 bit operating system.

  Thank you for your help.

  Robyn Drake

  E-mail address is removed from the privacy *.

  Try in Services, locate the printer spooler, select it, and then stop the service.

  Then check if you can delete the print job, if so restart the service

• bundle photo series will not work in lightroom 5.4.

  I just bought a subscription bundle of photo, but the serial number will not work in lightroom 5.4.

  I hade a LR5.4 tril version that is now exhausted, so I bought the PhotoShop LightRoom bundle but serial number will activate not LightRoom.

  I get a big red x

  Can any body help [plaease.

  Concerning

  Rik

  You must install Lightroom 5.4 using the CC Application Manager. Prior to this, follow these steps.

  Uninstall the trial LR 5.4 (Mac drag the application from your application package under) victory use Control Panel to uninstall. Your presets user, catalogue etc. will remain in place. Reboot your system, then to open CC Application Manager and download LR should be available for download. You will not actually enter the serial number.

  The two applications are the same just the licensing procedure are different in the creative cloud.

• the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  Hello

  · Were there any changes made on the computer before the show?

  You can check the link: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

• Windows XP Professional, Media Center Edition 2005 SP3 will not automatically put into hibernation

  I have re-installed drivers quick resume technology drivers & Intel Graphics & Sound & all associated drivers. but not good.

  Computer will be manually Hibernate & come out of hibernation, but is not automatically updated in hibernation?

  I tried the recommendations of microsoft all the but not good?

  The Device Manager shows all devices OK?

  Performed a restore the registry of oem disc & now put into hibernation very well at the moment, I hope that it will last? only lasted for a few days? its now to return again. ?

  not a fan of the system restores, especially under xp, but if it did work at one point, what has changed on your system, since it worked?

  http://support.Microsoft.com/kb/306084

  This is for two versions below, then you should be good.  But again this could be a temporary solution to a problem.

  Microsoft Windows XP Professional

  Microsoft Windows XP Home Edition