WINDOWS 8 enter "the sleep mode" and not to wake up, necessary reset.

Similar Questions

• HP OfficeJet 3830: 3830 HP wireless printer is offline in "sleep mode" and don't wake up to print

  I've just set up a HP OfficeJet 3830 as a printer connected to my network wireless domestic (Airport Extreme Base Station router 802.11ac wireless). I was able to print-out of my MacBook, but when the printer goes into sleep mode, it appears offline and unresponsive to print. I have to restart the printer for her to appear online and respond. The printer will be in the basement, so it would be very inconvenient down to reboot just to print it. Kind of defeated the purpose of a wireless printer. I tried to disable the sleep mode to see if it works, but sleep mode settings cannot be disabled in the printer preferences. I already spent 3 hours to solve this problem.

  I contacted HP technical support to solve the problem. The person told me restore default settings and then unplug the power to the printer and the router wireless for 30 seconds. After restarting the router, then the printer, we have connected the printer to the network with a static IP address. Who did the trick. Even if the printer is in "sleep" for several hours, it has not disappeared in offline mode, as it is done before. Problem solved for now. Hope this helps others.

• Windows 7 goes into sleep mode when not in service

  Computer completely locked up all night, had to make a stop/reboot power strip, now everything works fine, but it won't in standby mode when not in service, regardless of the settings I can give it in the control panel

  I want to emphasize this happened after I downloaded rage radio, although I've uninstalled it quickly after realizing I was didn't want or need and I loved all the extra stuff that goes with it.   Have no idea if they are related or not...

  I checked for updates of driver in the Device Manager specially for the new mouse I had installed.  He said that the device was working properly.

  I did the boot as described in the previous post, with no result.

  Not having anything better to do, I decided to try reinstalling the original mouse (disconnect the new mouse from the USB port and plug the original mouse) starting the computer working properly.

  There is clearly some kind of conflict with the new mouse, but I have no idea what it could be.

  Anyway, thanks a lot for your help.  I'm happy to have solved the problem!

• second monitor is not on after the "sleep mode"

  HI, I have an iMac of 2014 and an AOC monitor as a second screen, when my iMac goes into sleep mode and then re - wake up he does not recognize the AOC monitor and goes back to be one screen on the iMac. I have all the latest downloads and I am running OSX El Capitan

  What cable you use to connect to the screen. My friend had the same problem with a HDMI cable, it has opted for a thunderbolt cable and never had the problem again. Hope this helps, good luck to you,

  ~ Michael M

• During the installation of Windows XP, I enter the key and send a message: you have entered the CD key is not valid.

  Invalid CD key?

  Im trying to install windows xp on my old laptop from samsung before I sell, I have a copy genuine windows xp home edition (bought a few years ago), but when I get to the point to enter the product key, it says ' you entered the CD key is not valid! The key is the rear of the product then why it does not work and what I do?

   

  I thank you for all the help guys, don't really know if that it settled, but I read that if the time of bios is bad it can perform, I changed that and very well installation (so far!)

  Thank you

• Why my computer (windows 7) would a 'sleep' mode while I am on the internet or just doing some stuff on my computer?

  Recently I ran into a few problems with my windows 7.  Everything first, just a week and a half I am upgrading my antivirus/spyware program and a number of times I want to restart the computer.  I managed to get into my computer without difficulty the first time, then the last restart, I couldn't enter my computer!  So, I used the recovery disks and started fresh and I also bought another disc of the same product antivirus/spyware, installed and put in the new activation key and thought I was standing (there was some problems under reliability, he says Microsoft register server has stopped working).

  This morning, I have the problem that when I'm on the computer (either on the net or just doing some stuff on the computer), it goes into mode 'sleep' and I have to enter the password.

  What happens here?

  Palette of

  Hi Palette,

  Thanks for posting your question on the Forum of the Microsoft community.

  1. What is brand and model your computer?
  2. What anti-virus program is installed in the computer? Do you have problems running the program?

  The error "Microsoft register server has stopped working" usually arises due to the DEP data. In addition, your computer past "standby mode" reflects a possible problem with the installation fails, the anti-virus program or due to a misconfigured power management. So, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try to run the electrical troubleshooting utility and check if you get the sleep mode issues.

  Reference:

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  In addition, refer to the section: my computer will switch automatically to standby if I don't use it after a short period of time in the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  If the problem persists, go to method 2.

  Method 2:

  The other possible reason, then this problem started, like installing antivirus, I suggest you uninstall the program, run Microsoft fixit to uninstalled programs and then reinstall the software.

  Step 1: Uninstall anti-virus from its corresponding removal tool or in the control panel as shown below.

  • Open programs and features, click on the Start button , click Control Panel, click programs and then click programs and features.
  • Select the anti-virus program and then click Uninstall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  • Restart your computer.

  Step 2: Run the next fixit.

  The problems that the programs cannot be installed or uninstalled

  Step 3: Reinstall the anti-virus from the disc program.

  Check if you get the question.

  If the problem persists, try Method 3.

  Method 3:

  The question may arise also because of any conflict of third party software. So, I suggest to start your computer in a selective startup called, clean boot and check for the issue.

  How to perform a clean boot in Windows

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  In addition, for the error "microsoft register server has stopped working", please refer to the steps posted by Naman R in the following thread link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Microsoft-register-server-has-stopped-working/bd7b6ad6-c8ac-4D30-95d6-5a96f0fcd90f

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Windows 7 Professional "Sleep Mode" is not available

  Hello

  I have recently upgraded to Windows 7 Professional with a customized upgrade. But now, there is no choice to sleep in the power settings (it's just gray rather than black). It is also not available in the settings of power either. only, stop and put into hibernation. I have a laptop and find it more convenient to use the "sleep mode" when I close the lid rather than hibernation. How can I fix that it's getting boring now...
  Thanks :)

  Hello aust_09,

  Thank you for visiting the Microsoft answers community.

  This happens usually when your graphics card driver is not compatible.
  Try checking to determine which States are at your disposal:

  -Click on Start Orb > type cmd in the search box > right-click on cmd in the above results > click on run as administrator of
  -At the command prompt, type powercfg-a > press enter
  
  Read the results to determine which sleep states available

  You can also try to visit your manufacturer's website to find the correct drivers.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• Pavilion Elite HPE-180 t, windows 7 64 bit started to stop the sleep mode.

  Pavilion Elite HPE-180 t, windows 7 64 bit began to stop in the past few weeks.  It seems to happen from the sleep mode.  I leave the computer for more than 20 minutes, and when I come back, it is turned off.  When I start again, I have an error message and be able to start in safe mode.  I start in normal mode and I get an error "windows has recovered from an unexpected shutdown" without solution.  I also see an action center say error - consider sending additional information about a problem with the ATI display driver (graphics card is ATI Radeon HD5450 1 GB).  When I click for the solution, says that this solution could not be downloaded.  I've updated my drivers.  I haven't added a new hardware or software.

  Thanks HardBeatZ (HP).

  I did as you suggested and I had to uninstall several times because the device picked up previous ATI vs the generic drivers.  In any case it still stop with the blue screen of death when waking from sleep mode.   Then I went back and installed the latest graphics driver from the HP site for my system. I still had a few stops.

  Then I went through all my devices and checked for latest drivers.  All said that the best version is already installed.  Then I noticed that my HP bt500 bluetooth USB 2.0 adapter had only a driver available for windows 7 32 bit (I have installed 64-bit).  I used a keyboard and bluetooth mouse.   So I unplugged the adapter and have resorted to the USB keyboard and mouse and closures of blue screen stopped.  It seems that the network card was originally wake up from its sleep.  I also disabled the reactivation of LAN in the properties of the network adapter device.

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• I'm trying to install Office note 8.1 but get this error message immediately after you enter the serial number and authentication code.

  Remark Office OMR

  I've been remark office omr 8.1 installed on 32-bit windows vista (intel pentium DC) for the last year laptop. Now plan to move it to a more recent hardware and the OS.

  I'm trying to install Office note 8.1 on Windows 7 Home Basic 64 bit (on laptop AMD E450 DC base). But am getting this error message immediately after you enter the serial number and authentication code. I tried to install different versions of the .net Framework (from 1.1 to 4), but nothing seems to solve the problem.

  I even tried to install it in mode compatibality. but no luck.

  Here is the error message (between BEGIN and END lines)

  -BEGIN-

  An error occurred instantiating the object of authentication. Please restart your computer, and they run the Setup again.
  Error number = 2147219705

  Error = description

  ------ END--------

  Appreciate any help

  Thank you

  SJ

  Just for the follow-up of this: I have sent comments, and they responded in 20 minutes with:

  Please contact the Support of the note.  I'm sorry that you are experiencing this error, but it seems by the error message that you install note on a Windows 7 computer.  This error is caused by a Microsoft security update that was released in July 2011 for Windows 7 and caused upward to change our software.  Here is access to our Download Center for you to install the version 8.4 of note.  You will use your current serial number, license key and authentication code.
  They then provided a link to their Download Center where I could download 8.4
  E - mailer to * address email is removed from the privacy * and they will answer you. They have great customer service.

• Install window xp media Center 2005 you entered the CD key is not valid

  Hello
  I have an Advent 8111 laptop and I am trying to format the hard drive and reinstall Windows XP Media Center Edition 2005. I have a copy of the Widows XP MCE 2005 to my IT Department at my workplace as they said that they could download and burn for me quickly!
  but after formatting the hard drive and the partion on my laptop I have to type my product key, which I got from the bottom of the laptop. The error window pops up saying "you entered the CD key is not valid" and I don't see any other option to have passed this stage. I contacted ADVENT but they were not able to help. What should I do next?

  Where did you downloaded it go?  Are they legal?

• Pair cant my apple wireless keyboard for my new tv4 apple... He will not be the Apple TV and not ask the pairing code enter... Anyone know what I need to do?

  Pair cant my apple wireless keyboard for my new tv4 apple... He will not be the Apple TV and not ask the pairing code enter... Anyone know what I need to do?

  The ATV4 does not work with any wireless keyboard. The only alternative to the built-in function 'keyboard' is the iOS app.

• When you enter the user name and password in Windows Mail I get the following error: Server error: 0x800CCC90, error number: 0x800CCC92.

  Difficulties of username and password.

  In Windows Mail I suddenly wonder for the user name and password.  I fill them but receive no mail from mu.  I get the message:

  Account: 'pophost1.classicfm.net', server: 'pophost1.classicfm.net', Protocol: POP3, server response: '-ERR failed the connection. ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92.

  Please can you help me?

  Hello

  ·         Were there any changes to the computer, lately?

  Method 1:

  (a) start the Windows Messaging mail client.

  (b) click on 'Tools' from the main menu and choose "accounts".

  (c) a pop up will appear showing you all the email accounts in Windows Mail. Select the one that gives you the error and then click on the button 'Properties'.

  (d) another window pop up displays all parameters associated with this account.

  (e) under the "servers" tab check the 'e-mail username' and 'password'. One of them would certainly incorrect which translates the ID of Windows Mail error 0x800CCC92

  (f) to avoid having to enter the user name and password each time, check the box in front of "Remember password".

  (g) once you make the appropriate changes, click on the button 'apply' then 'OK'. Close the other pop-up window

  Method 2: Remove the existing from Windows mail email account and create a new one following the link provided below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

• Everytime I open my Windows Live email account I asks me to enter the user name and password and I see an 0x8000CC17 error message

  Whenever I open my email account, I asks me to enter the user name and password and I see an 0x8000CC17 error message. Please can you offer any advice. Thank you

  * original title - Hello, I am a user of Windows Vista and my email account is windows mail *.

  Hi Petersanswers,

  Thanks for posting your question in the Microsoft answers Forum.  For information about Windows Live Mail, please visit the following link:

  http://windowslivehelp.com/forums.aspx?ProductID=15

  Thank you!