Impossible to enter in recovery mode

Similar Questions

• How to enter in recovery mode in El Capitan?

  The way I did on the previous operating systems was hold cmd + r, BUT now if I do this, he sends me to the recovery of the Internet Mode instead which as far as I know, must only show when I press cmd + option + are so I'm confused, what is the new way to get into the recovery mode and not the mode of internet recovery on El Capitan?

  If the recovery partition is not available on your machine you will be automatically mixed with the recovery of the Internet.

• iPhone 4 crashed, has entered into recovery mode and don't update or restore (error 4013)

  Hi all

  So, the other day, while watching a YouTube video, my iPhone 4 became unresponsive and turns off. Since then, he has been slain in recovery mode, only showing the "connect to iTunes screen.

  iTunes gives me two options: update or restore. As I wanted to save my data (I have been so sloppy as to not have backed up the device for about a year!) I tried to update a bunch of times. However, it keeps me gives error 4013. Then, having given up this possibility, I also tried to restore the device several times, but unfortunately exactly the same phenomenon occurs.

  What happens is: iTunes downloads and extract the software, says "waiting for iPhone" for a few seconds, then it said "Preparing iPhone software update" because I think little about exactly 15 minutes. Then he said "Waiting for iPhone" still for a few seconds, after which it gives me error 4013.

  My guess is the iPhone automatically leaves the recovery mode so that it gives me this error because after 15 minutes and restarts alone, leaving iTunes to "think" that there is some kind of connection problem or do not recognize the device as being the same when it turns off and turns back on after 15 minutes. If this is the case, perhaps restarting interrupts the update/restore process. Or maybe just crashes in this state of preparation for 15 minutes because he is unable to do what he needs because of a sort of damaging the material.

  What I've tried so far:

  -Update iTunes to the latest version (12.2.2)

  -Updated the software on my Mac (although I must say that it is an old MacBook with OS X 10.7.5; I don't know if it's any factor here)

  -Restarting my computer

  -Switch to the other USB port

  -Using another USB cable (although the one alternative that I have is not in very good condition)

  -Try on a friend's computer (a much newer MacBook; I don't know what operating system well)

  -Force the device to restart a package of time (now the power and the home buttons)

  -A few third-party applications that claim to be able to get the iPhone out of recovery mode

  Any of you have ideas, ideas or suggestions on what is the cause and how can I get my phone back to life again? Recover my data would be obviously ideal, but I would also be very happy with just equipped with a device of work once again. I know it's an obsolete phone but it has always worked well.

  Thank you in advance for your help!

  Anyone? I could really use some help. Thank you!

• Can not enter in the Mode of recovery to Neo V... Help, please

  HII friends... I anchored my Xperia Neo V a few days ago and flashed with ClockworkMod...

  The problem is that I can't enter into Recovery Mode via ROM Manager or QuickBoot
  When I click on reboot into Recovery its just restart the phone... So kindly help pleaseee

  Forst, go to MCG app and select install MCG (if not done before). Now, turn your unit off and restart it, as soon as you see blue LED, press the home/menu/back key

  See if you enter MCG

  If not then I must assume that you have installed the wrong MCG

  The app is different for Neo V

  http://Forum.xda-developers.com/showthread.php?t=1364509

  Install this app from above, after you install it, go to app MCG > select Installer MCG > fact

  Now restart your device

  as soon as you see blue LED, press home/menu/back key

• Can not switch to OSX Recovery Mode: looking for the keyboard and magic mouse

  I'm trying to reset my end 2012 Mac Mini 2.3GHz/i7/16GB to factory settings to try to get the machine a new lease on life.

  However, when I try to enter in Recovery Mode (in now command ⌘ + R when the system starts up), the machine will stop to a screen showing the instructions to turn on a magical keyboard and Magic Mouse.

  I have a trendy apple (USB) keyboard and a USB mouse is connected.

  How can I activate these entries, or how can I pass this screen looking for a keyboard/Magic Magic Mouse?

  [I guess one option is to use a magic mouse or a magical keyboard - I have in my office - but it is not sensible that you need them to access recovery mode].

  Thank you

  Got my Magic Mouse of the office, got into recovery mode. Surprised, you need a Magic Mouse, and who does not have a USB mouse to the recovery mode!

• Internal HD will not rise in Recovery Mode

  I have an MBA who said that I had to repair the disk 11'.  Easy fix right?  So I restarted the computer and enter in Recovery Mode, to make a repair in disk utility and the HD is grayed out.  I can't select it, nothing.  I ended up installing El Capitan and during the installation he completed repairs, but I still can't get to HD in repair mode.  The computer starts and works fine otherwise.  I must stress that the HD is a secondary market Transcend that we replaced a year ago.  Now my client wants to wipe the computer and give it to a family member, but like I already said I can't make a clean wipe and install via the recovery mode.  Any ideas?

  Thanks in advance!

  Rob

  What version of Mac OS X has been pre-installed, when it was new? If you plan give away, and then you must clear the disc and install the version that CSME with the computer. If it's on DVD, you need the installation discs.

  Before you sell or give your Mac before Lion

  Follow the instructions until you get to step 5:

  What to do before you sell or give away your Mac - Apple Support

  When you get to step 5, you will need your Snow Leopard or earlier installation disc that came with the computer when it was new.

  1. Follow these steps to install the original version of the operating system that came with the computer.

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After disk utility charges select the hard disk entry in the list on the left (mfgr. ID and)

  size of the disk.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Journaled), then click on the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. If you plan to sell or to give to your remote computer, then proceed as follows:

  Once you reformat your hard disk and reinstall OS X, the computer restarts with a

  Screen of welcome and you prompt to choose a country or region. If you want to leave

  the Mac in an out-of-box state, do not continue with the configuration of your system. Instead,.

  Press command-Q to stop the Mac. When the new owner turns on the Mac,

  the Setup Wizard will guide them through the configuration process.

  Otherwise, if it came with Lion or later:

  What to do before you sell or give away your Mac - Apple Support

• Need help to Mini 4 into Recovery Mode iPad

  Password forget on ipad mini 4 device and peripheral not spend in recovery mode according to the instructions from Apple.  Device is disabled, and each restart of the device it turns off for 15 minutes, including those trying to enter into recovery mode.  WiFi is not enabled on a device disabled, so no iCloud reset option.  iTunes is available, but the camera never sync would be so iTunes requires the device to be connected first before it connects.

  The iPad Mini 4 has a different process to enter into recovery mode?

  Directions to the recovery mode are the same for all iOS devices, but it may take a few tries. Follow the directions here: https://support.apple.com/en-us/HT201263

  -AJ

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.

• I try to restore my ipod, but it wants me to enter the password on the ipod but my ipod is disabled, ive even put the ipod into recovery mode

  Im trying to restore my i Pod but 5th generation. I put my ipod into recovery mode, but when I try to restore it, it asks me to enter the password on my ipod but I can't because the id ipod disabled.

  People with disabilities
  Place the device into Recovery Mode iOS
  https://support.Apple.com/en-us/HT201263
  and then connect you to your computer and restore via iTunes. The iPod will be erased.
  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled
  https://support.Apple.com/en-us/HT204306
  If the recovery mode does not work, try the DFU mode.
  How to put iPod touch / iPhone in DFU "Karthik doodles."
  https://geekindisguise.WordPress.com/2009/07/16/how-to-put-iPod-touch-iPhone-int o - dfu mode.

  To learn how to restore:
  Use iTunes to restore your iPhone, iPad or iPod to factory settings
  https://support.Apple.com/en-us/HT201252
  To restore backup see:
  Restore your device from an iCloud or iTunes backup - Apple Support
  https://support.Apple.com/en-us/HT204184
  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.
  You can re-download most of iTunes purchases by:
  Download after purchase from the App Store and iTunes Store iBookstore
  https://support.Apple.com/en-us/HT201272

  If no problem what happens or doesn't happen, and when in the instructions? When you get the iPod into recovery successfully mode and connect to iTunes on the computer should say that it found an iPod in recovery mode.

• iPhone stuck in Recovery Mode 6s

  I have updated to iOS 10. When I came back to my phone, it's in recovery mode. I kept restarting. Still stuck. It takes forever to restore on my computer, it ALWAYS does. I don't know if this has to do with the fact that my phone has had betas out there, but now I turn here: what's next?

  Hello malcolm229,

  Welcome to the communities of Apple Support!

  Looks like you were previously running iOS 10 beta and now have problems updating your iPhone to the public version of iOS 10. We can see you iPhone seems to be in both recovery mode and you cannot move forward.

  We know that unexpected situations, as are not optimal, but we are here for you!

  At this point, if you have not already done so, you will need to follow the steps described in the article below to restore your iPhone and run the public version of iOS 10.

  Any software beta iOS - Apple Support

  Back to the current version of the iOS

  If you want to come back to the current version of the iOS using iOS beta, follow these steps:

  1. Make sure you use the latest version of iTunes.
  2. Put your device in mode recovery and restore it. If you enable find my iPhone, enter your Apple ID and password after restoring to activate your device.
  3. If you are unable to finish the restoration, get help.
  4. Once the restore is complete, you can configure your device to your backup archived. This backup must be from an earlier version of iOS.
     

  If your device is equipped with a version beta of iOS and you return the device to a previous version of iOS, that you can not restore your backup. This can happen if the backup is from a later version of the iOS. For example, if you restore your device to the current version of the iOS and try to use a backup that you created using a beta version of iOS.

  We realize that your iPhone is already showing connect to iTunes chart on the screen, but the work through the steps as described here to try to resolve the problem.

  Have a nice day

• can't get into recovery mode

  My ipad2 nonstop, first. When I press on and press and hold the power button on the top, slide stops seeing never does. Finally I connect to computer via USB and itunes. When I try to turn off hard, it just won't work. I try to get back in now theHOME and button / stop, but I never get further than the white Apple Logo.

  Just to be sure:

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  You may need to do the above, more than once as recovery mode is difficult to enter.

  Restore first as New and test. Then restore backup if you wish. If the backup is corrupt it will probably bring back the question.

  https://support.Apple.com/en-us/HT201263

  If the steps above do not help, you may need to consider at an Apple store for testing.

• Mount gray for disk encrypted in Recovery Mode

  I'm under the last El Capitan on a MacBook Pro for mid-2015. The internal boot drive is encrypted with FileVault. The issue I see is that when I boot into Recovery Mode so that I can run first aid on the boot volume, the "Mount" button is dimmed when I select the logical volume. Anyone know what I am doing wrong or what could be the problem?

  Thank you.

  You must first UNLOCK it. To do this, in Recovery Mode. Select the volume greyed, then click on edit on the menu bar and UNLOCK. Enter a password has been set to unlock the volume on startup.

• Need help in recovery mode.

  -Used in all attempts at password.

  -Ipad says now "Disabled - Ipad connect to Itunes" on the lock screen.

  -When hooked up to itunes that does nothing, it's just told me to enter the password on the ipad, I can't.

  -L'Ipad doesn't have a wifi password stored so cannot use Icloud to delete it and start over.

  -hold the "home" button when offshore and connect to PC/Itunes doesn't either.

  Any ideas?

  Follow the instructions in this support article under 'Clear your phone with Recovery Mode':

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  See you soon,.

  GB

• iPod Touch 5th generation stuck in recovery mode

  I don't see anything on this topic anywhere. However, I "brick" my iPod 5th generation Touch while implementing the update to the 9.2.x the 9.3.1. I held 9.3 as people around me ran into a similar problem with their iPhones, but they were able to recover their phones - just with wiped data.

  My experience:

  1. Received the notice that 9.3.1 was available.
  2. Plug it to my PC and backed up with iTunes.
  3. Downloaded the update via iTunes and begun the process of updating.
  4. Entered my PIN to unlock the device and allow the update.
  5. Update started a few minutes later, I received a notice that it failed and the unit would need to be restored. (Error code was 3014 in my case).
  6. The restoration is only an option "restore and update".

  No matter what you do, the device fails to restore ever.

  The link they send you is useless: https://support.apple.com/en-us/HT201210

  In my case everything was up to date. I restarted the system – several times. Forced on the device reboots. Put it in recovery mode, etc. (https://support.apple.com/en-us/HT201263)

  There is no problem with my hosts (https://support.apple.com/en-us/HT201442) file. I completely disabled my firewall and AV. I had plugged nothing else than the KB and mouse... I even tried from another computer - nothing.

  In fact I never get a real 'Restore' option - always started with restoration, but the next screen has been updated and the restoration.

  I saw a post were actually downgrade iTunes to an older version (for a first generation iPod Touch) solved the issue but I have not yet tried.

  Fix network errors

  Errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200. You can also see these alert messages:

  • There was a problem downloading the software.
  • The device is not eligible for the requested build.

  These alerts mean that your computer is either having difficulty contact the Apple update server or connect with your iPhone, iPad or iPod touch. Search your computer for the software or settings that might cause problems of communication between your computer and Apple or between your computer and your device.

  If you still see the error message, check your security software.

  Check your security software

  Errors: 2, 4, 6, 9, 1611, 9006: sometimes security software may prevent your computer to communicate either with the server up to date with your iPhone, iPad or iPod touch or Apple. Check your security software and settings to ensure that they are not blocking a connection to Apple servers.

  If you still see the error message, locate the USB connection problems.

  Check your USB connections

  Errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014. You can also see a message that includes "invalid response". If a USB connection between your iPhone, iPad or iPod touch and your computer is interrupted, you will not be able to update or restore.

  To narrow the problem, try different equipment:

  • Use the USB cable supplied with your device, or another cable USB Apple.
  • Plug your cable into another USB port on your computer. Do not connect on your keyboard.
  • Try another computer.
  • The other problems with the USB connection, then with your security software.

  If you still see the error message, search for hardware problems.

• First HP V13 recovery mode.

  Hello!
  Well, I need help I was playing with the buttons on my first HP. Then I press symbol (X) then. Suddenly, the screen displays the message 'First HP V13 Recovery Mode.'
  and I don't know what to do!
  I'm afraid to do anything else if I keep on pressing the buttons. Please help me

  

  Hello

  There are several ways to reset the calculator:
  
  What follows is a simple warmstart, retrieves the keyboard control, restores most of the RAM to the State in which he was stopped last, losing so eventually changes made at this session:

  • On-Symb key

  Or

  • Reset hole (back of unit)

  The following clears most of the memory, but it retains a few basic things (e.g. name of calculator, color theme, language):

  • ESC + Apps + we

  The following text always resets the calculator to new factory:

  1. Press in and hold the three keys with the letters C, F and O (non-zero).
  2. And now their all downstairs, poke a paperclip in the RESET hole in the back.
  3. When the diagnostic screen appears, release the keys C, F and O.
  4. Press 4, then 3, then enter.  He will wipe away the memory of the new plant calculator.
  5. When the blue OK is displayed, press ESC, and then 9.
  6. It usually ends with the initial installation, including hitting swiping the tiny HP logo with your finger to the right, by selecting the language by default, or other things, according to the versions of your hardware and firmware.

  Have you updated the calculator to the latest firmware?

  The latest version is currently 6030. (updates Dec 2014:6975)

  Install the connection from the CD Kit.

  Once installed the connection, update the calculator.

  The following method is recommended:

  • Connect your HP Calculator first via the supplied USB cable (connected directly, do not use a USB hub)
  • Start the HP connectivity Kit
  • Click the tab of the calculator
  • Right click on the name of the first HP you want to update (it would be that you connected before starting this procedure)
  • Write down the version number, and then click the OK button
  • Click the Help Menu and select Check for update
  • Look for the pop-up box to update, check the version number that is newer than the one you want to update.
  • Then click on the download button
  • That's it, you will see the update being loaded and installed on your calculator screen. Don't click too quickly out of the HP Connectivity Kit, wait a minute or two after the completion.
  • In addition, there are a step in the connectivity Kit where it is advisable to back up the version that you had before the procedure, just in case. This way, you have a way to cover again.