Entrare in SSH su UN nodo con Esx root of da a different account

Similar Questions

• PROBLEMA CON ESX SERVER 4.00 y device of Almanecamiento NAS

  Dias 'Buenos '...

  I have a server VMWARE ESX 4.0.0

  Tapeworm running 3 maquinas office en UN Terastation (Buffalo), hasta only to repent UN dia debido has a corte electrico han dejado funcionar.

  Al VSphere Client open me las como encuentro: Unknow (Inacesible): Normal porque no can montar el NAS dispostivo, y el servicio NFS without esta running.

  Tras leer y leer, me daba errores refused to conecction, por lo as disabled el no firewall y el servicio portmap Québec corri no estaba funcionado.

  Ahora cuando intento montar desde el Vsphere me error da este:

  Create the NAS data store

  192.168.1.208

  Configuring the host error: error NFS: impossible

  Mounting filesystem: unable to connect to the NFS server

  Desde el ESX, TR intento montarla manualmente me devuelve este error

  [root@eowyn /] # mount t nfs 192.168.1.151:/openerp/new_instancia/mnt/net /.

  Mount: 192.168.1.151:/openerp/new_instancia failed, reason given by server: permission denied

  AENF me daba connection refused error, pero como dije antes he desactivado good rules of firewall del ESX y ahora me da este error TIME OUT antes como o.

  [root@eowyn /] # rpcinfo Pei localhost

  program to proto port

  100000 2 tcp 111 portmapper

  100000 2 udp 111 portmapper

  100024 1 udp 925 State

  100024 1 tcp 928 status

  100003 2 udp 2049 nfs

  100003 3 udp 2049 nfs

  100003 4 udp 2049 nfs

  100021 1 udp 45214 nlockmgr

  100021 3 udp 45214 nlockmgr

  100021 4 udp 45214 nlockmgr

  100003 2 tcp 2049 nfs

  100003 3 tcp 2049 nfs

  100003 4 tcp 2049 nfs

  100021 1 tcp 50514 nlockmgr

  100021 3 tcp 50514 nlockmgr

  100021 4 tcp 50514 nlockmgr

  100011 1 udp 656 rquotad

  100011 2 udp 656 rquotad

  100011 1 tcp 659 rquotad

  100011 2 tcp 659 rquotad

  100005 1 udp 845 mountd

  100005 1 tcp 848 mountd

  100005 2 udp 845 mountd

  100005 2 tcp 848 mountd

  100005 3 udp 845 mountd

  100005 3 tcp 848 mountd

  [root@eowyn /] # service portmap start

  From portmap: [OK]

  [root@eowyn /] # cat/etc/hosts

  127.0.0.1 localhost

  192.168.1.208 eowyn

  [root@eowyn /] # cat /etc/hosts.allow

  #

  # hosts.allow this file describes the names of the hosts which are

  # the right to use local services of INET, as agreed

  # by the server "/ usr/sbin/tcpd.

  #

  [root@eowyn /] # cat /etc/hosts.deny

  #

  # /etc/hosts.deny this file describes the names of the hosts which are

  # * not * allowed to use INET services, as agreed

  # by the server "/ usr/sbin/tcpd.

  #

  # The line portmap is redundant, but it is left to remind you that

  # the new secure portmap using /etc/hosts.deny and hosts.allow.  In particular

  # Please note that NFS uses portmap!

  [root@eowyn /] # mount.nfs 192.168.1.151:/openerp/new_instancia/mnt/net.

  "mount: mount server NFS ' 192.168.1.151 ' failed: expired (try again).

  Alguien sabe as puedo hacer? He read por todos sites pero no encuentro none answer nor are se por donde pueden come los tiros.

  MUCHAS Gracias.

  Hola splitX:

  Me alegro as todo haya ido well. Aunque los puertos aparezcan open no you extranes what's been algun USO fichero o activo as solo algo haya will can eliminate don't con a reset a fabrica.

  Thanks for the guy there remember puntuar las useful responses there close the consulta.

• Lost of Comunicación con ESX 3.5

  Hola,

  OS Le the problem as I have.

  Stage

  VC 2.5

  2 ESX 3.5

  ESX1: 4VM

  ESX2: 4 VM

  Storage shared Cabina de EMC ISCSI Comunicación

  Leads running 2 Años sin any problema, pero hoy desde el VMware Infrastructure Client conectado al VC he visto as el ESX2 esta in gray con UN aspa en rojo las Máquina Office tambien estan in gray y no puedo access consoled her desde el Client from VMware, las maquinas office are running, I can access desde TS.

  VMware Infrastructure Client no puedo conectarme al ESX2

  PuTTY I can connect ESX2 desde Al

  El ESX1 works perfectly.

  SE os happens than you can estar pasando?

  Gracias

  Hola MEfoc:

  Checks TR por HTTP (S) you can access al ESX2. No ser asi y tienes oportunidad reiniciar el host, hazlo.

  A greeting.

  --------

  José Luis Gómez Ferrer de founder Couto of PiPo e2H Blog: http://blog.e2h.net

  If upon that esta otra respuesta utility fue, por favor any o da el voto. Gracias.

  If you find this or any other useful answer, please consider awarding points. Thank you.

  

• Fallo al hacer cluster HA con ESX 4

  Hola

  Me estoy sown este fallo al pasar a UN HA clustered host, me da el fallo what're porque puse UN gateway that doesn't exist (in reality no tengo) y ahora no puedo quitarlo, hay alguna forma quitar esta puerta of enlace?

  creeis than viene ahi el problema?

  Gracias.

  Jose de Buenas

  If no tienes a gateway este o none are pings you can try specifying otra u otras Máquinas para that el las HA use para saber if hay cortes.

  Lo puedes con specifying the das.isolationaddress option that is in las the config led HA advanced options (you UN pantallazo annex).

  También puedes specifying in estas Québec el HA options use otras redes u otras consolas para realize esta funcion suponiendo than tuvieses more than one SC o as for example use una Dirección ip para determining that ESX realmente esta aislado el mas...

• To connect by SSH slow to deal with the root password

  Strange question here, more than inconvenience cause really questions. I just did an install ESX 4 on a G5 BL680 vanilla. I enabled root ssh and sshd restared so I could connect and configure with PuTTY. In the putty session, after that I entered the root password, it takes about 50 seconds to complete the opening of session - every time... The same server by connecting with the ILO, it is as usual. There isn't any other slow once connected, just that. Other ESX hosts on the same subnet (ESX 3.5) do not have the same problem. I tried to restart sshd, restart the server. It has all the latest patches for ESX 4.0. Someone has an idea of what he does all this while?

  Thank you

  Randy

  Check if you have DNS configured correctly or at all.

  cat /etc/resolv.conf

• ESX on RAID another or different partition

  Hello

  Simple question, I have a PowerEdge R710 with 5 X 146 GB SAS.

  I should:

  1 - create a RAID-5 and install ESX on it and given VMs

  2 create a RAID-5 and two partitions: one for data and one for ESX

  3. create a RAID-1 for ESX and RAID 5 for the data

  Option 1, what happens if I want to reinstall ESX, the configuration will erase all data from VMS?

  For option 2, is it possible? I'm not sure if I saw the possibility of creating a partition during installation

  For option 3, already tried and working great, but I lost performance and storage

  Thank you!!

  I create a RAID5 with 5 disks and would divide - using the RAID controller - in two logical volumes. 10 GB for the hypervisor (actually 5-6 GB is the minimum) and the rest to the data store.

  I hope that you have a RAID controllers with cache battery backup, otherwise that your system is not very efficient, regardless of RAID level you use.

  André

• ESX 3.5connect on 2 different SAN

  Hello

  It is possible to connect different SAN 2 on the same ESX Server?

  Thank you

  Yes... Just plug them together in the same fabric and area available LUN like you did with the first.

  Go here and click on "Fibre Channel SAN Configuration Guide" for more details.

• Connect to an ESX 4.0 host 2 different San

  HI -.

  Just wondering is it possible to connect a host to 2 different SAN Fiber Channel s in 2 different sites. I think it's possible, but I do not forget that you are presenting one of two SAN to be vigilant on the ID of the LUN also is it possible to always support multipathing when you are connected to 2 FC SAN?

  Anyone can comment on their experiences? Any advice would be welcome.

  Kind regards

  Wesley

  CSOPS1 wrote:

  Just wondering is it possible to connect a host to 2 different SAN Fiber Channel s in 2 different sites. I think it's possible, but I do not forget that you are presenting one of two SAN to be vigilant on the ID of the LUN also is it possible to always support multipathing when you are connected to 2 FC SAN?

  Yes, it is possible and taken in charge. You just give the WWN name to your team of enterprise storage, they present your recan your storage adapers (or possibly restart), storage, add storage and to define your strategy for creating paths to each LUN.

  We do now because we are in the middle of a SAN migration.

• VLAN Trunking, Link Aggregation Teaming e

  Hello to all,

  avrei need some delucidazione in merito ad una configurazione di vsphere tipo di.

  VI spiego in brief:

  2 vSphere host (host a host B e) con Nic 4 x host

  1 Swicth (by manage Vlan [LAN, WAN, DMZ, vMotion, FT, iSCSI, etc...])

  UNA configurazione base pensavo di implementare e configurazione di che a vSwicth0 con 4 Nic teamwork by every host.

  1 configurated it grouping schede di 4, sul mio spend devo configurare Illinois Link Aggregation o mi not serve? (Su Che HP e called trunk mi pare) in terms static pole e Unico supportato da vmware. IO ho noticed no configurando sullo switch funziona tutto e nulla che to provo a uno dei 2 cavi dictionary alla volta no capacity it marked.

  In più is configurated the vlan lato vmware e lato switch it tutto funziona a meraviglia.

  Ho cercato della menus in merito e mi sono imbattuto knew menus che strategies come collegare una a nodo con ESX 2 schede di rete grouping known uno switch HP 1820 - 24G switch trunk spiega di configurare lato Dove he terms static e change policy Exceptions led on the way teamwork based on hashing IP!

  Ho seguito guida (penso alla lettera!) my con mi ritrovo a problema e cioè che non raggiungo più he nodo ESX... create Reed is raggiungo all the macchine all'interno delle vlan!

  Part menus seguita indicarmi could be wrong something particular? Qual'e un'approccio by una configurazione del genere?

  Grazie!

  Ciao,.

  He port group management che ESXi default crea sommergibili durante ha UN override sulle di teaming dello switch che lo contains rules, pertanto is configuri ip hash sullo switch devi premurarti di farlo Reed dichiaratamente anche sul port group, altrimenti lo lost cosi come indichi! By Miss instradamento e momentaneamente entrare ESXi stacca chest he oppure altre tre at door

  By the configurazione, funziona tutto anche senza trunk perch it grouping nativo port id che fa e agli switch, solo devi overlooks VMware verificare che gli convenctions delle tabelle di ARP siano veloci, o nel caso di più presenti, che sia abilitato switch it quick dello tree covering weight, my con i modelli HP come he tuo o superiore usually queste cose funziona nativamente.

  Ciao,.

  Luca.

• Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

  Hola Buenas,

  Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

  El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

  Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

  He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

  El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

  Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

  El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

  MUCHAS Gracias

  Buenas

  Between 2 workstation are posible realize ese tipo configs of forma limpia.

  El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

  Para hacer eso as pides, deberias workstation pasar an esxi.

  Saludos

• Update 4.0 to esx 4.1.0 348481 can no longer connect in SSH

  Hello:

  I've recently updated 4 host esx 4.1.0.  I called them VM1, VM3 and VM5 VM7. I also installed a new physical server Vcenter. For one of the hosts, (VM1), I decided to do a fresh install using the CD. I am doing this for my own personal reason so I'm forced to redo a machine from scratch due to rehabilitation.

  For my 3 other hosts (VM3, VM5, VM7), I used the Update Manager tool, followed by documentation and some UTube tutorials. This seemed to work well. I had all the computers in a cluster, and they all worked without any problems.

  What I'm trying to do now is to install a component of Dell. Following the instructions for it, I ran into an issue with SSH. I can no longer connect SSH using PuTTY with the two previous accounts that I had before the upgrade.

  When you perform a new installation, I always create a 2nd account called vmadmin. I'm doing this on the same screen, he asks the password to root for the installation CD. Once I have installed host I use an article of Vmware to access SSH root (8375637 KB)

  Interstingly enough VM1 (installation of one I did costs since) allows me to connect in SSH using VMadmin... and roots. But the three hosts I upgraded using the Update Manager is no longer connect in SSH allows you to use one of the two accounts.

  Using Vcenter I can connect to the host directly using roots but is no longer it will allow the account vmadmin connect (permission denied).

  When I connect to the host using Vcenter, I see the vmadmin account. I tried to look at the properties on both my work (VM1) host computer and a work not to compare... but everything looks the same.

  Can anyone help with what do I do to fix this? and or add a question if I can respond to the need for additional information?

  Thank you

  R

  I guess that you don't have a DRAC card in your server... otherwise, it is simple to access the console and resolve the problem.

  Have you try to connect to each host and add a new user?

  André

• ESX 2.5 - How can I confirm if the server is start from the MUI SAN or SSH?

  ESX 2.5 - How can I confirm if the server is start from the MUI SAN or SSH?

  [root@esx011 /] # wwpn.pl
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0

  [root@esx011 /] # wwpn.pl - v
  WWPN 1.02 Copyright VMware 2003
  Display the names of WW and VMHBA ports for fiber channel cards
  For each relevant here are the Qlogic vmhba and names of Port Emulex WW
  Adapter WWPN PCI (decimal)
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0 / proc/scsi/qla2300/2
  vmhba0:0: scsi-qla0-port-0 5005076300c7b4a2 = 5005076300c0b4a2:5005076300c7b4a2;
  vmhba0:10: scsi-qla0-port-10 500507680110b79d = 500507680100b79d:500507680110b79d;
  vmhba0:11: scsi-qla0-port 5005076300cc9561 - 11 = 5005076300 c 09561: 5005076300cc9561;
  vmhba0:12: scsi-qla0-port-12 5005076300c80db4 = 5005076300c00db4:5005076300c80db4;
  vmhba0:13: scsi-qla0-port-13 5005076300cbb0b1 = 5005076300c0b0b1:5005076300cbb0b1;
  vmhba0:1: 500507630308414 d scsi-qla0-port-1 = 5005076303ffc14d:500507630308414 d;
  vmhba0:2: 500507630313414 d scsi-qla0-port-2 = 5005076303ffc14d:500507630313414 d;
  vmhba0:3: scsi-qla0-port-3 5005076300c7b0b1 = 5005076300c0b0b1:5005076300c7b0b1;
  vmhba0:4: scsi-qla0-port-4 5005076300cbb4a2 = 5005076300c0b4a2:5005076300cbb4a2;
  vmhba0:5: scsi-qla0-port-5 5005076300cca01d = 5005076300c0a01d:5005076300cca01d;
  vmhba0:6: scsi-qla0-port-6 5005076300cc0db4 = 5005076300c00db4:5005076300cc0db4;
  vmhba0:7: b 500507680140, 799 scsi-qla0-port-7 = b 500507680100 799:500507680140 b 799;
  vmhba0:8: scsi-qla0-port-8 5005076300cfa01d = 5005076300c0a01d:5005076300cfa01d;
  vmhba0:9: 5005076300 c 89561 scsi-qla0-port - 9 = 5005076300 c 09561:5005076300 c 89561;
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0 / proc/scsi/qla2300/3
  vmhba1:0: scsi-qla1-port-0 5005076300d0a01d = 5005076300c0a01d:5005076300d0a01d;
  vmhba1:10: scsi-qla1-port-10 5005076300cf0db4 = 5005076300c00db4:5005076300cf0db4;
  vmhba1:11: 500507630318414 d scsi-qla1-port-11 = 5005076303ffc14d:500507630318414 d;
  vmhba1:12: 5005076300 c 49561 scsi-qla1-port - 12 = 5005076300 c 09561:5005076300 c 49561;
  vmhba1:13: 5005076300 d 09561 scsi-qla1-port - 13 = 5005076300 c 09561:5005076300 d 09561;
  vmhba1:1: scsi-qla1-port-1 5005076300c4b4a2 = 5005076300c0b4a2:5005076300c4b4a2;
  vmhba1:2: b 500507680130, 799 scsi-qla1-port-2 = b 500507680100 799:500507680130 b 799;
  vmhba1:3: scsi-qla1-port-3 5005076300c4b0b1 = 5005076300c0b0b1:5005076300c4b0b1;
  vmhba1:4: scsi-qla1-port-4 5005076300d0b0b1 = 5005076300c0b0b1:5005076300d0b0b1;
  vmhba1:5: scsi-qla1-port-5 5005076300c4a01d = 5005076300c0a01d:5005076300c4a01d;
  vmhba1:6: 500507630303414 d scsi-qla1-port-6 = 5005076303ffc14d:500507630303414 d;
  vmhba1:7: scsi-qla1-port-7 500507680120b79d = 500507680100b79d:500507680120b79d;
  vmhba1:8: scsi-qla1-port-8 5005076300d0b4a2 = 5005076300c0b4a2:5005076300d0b4a2;
  vmhba1:9: scsi-qla1-port-9 5005076300c30db4 = 5005076300c00db4:5005076300c30db4;
  [root@esx011 /] # vdf h
  Size of filesystem used Avail use % mounted on
  / dev/sda1 3.0 G 2.5 G 364 M 88%.
  / dev/sda3 15G 5.6 G 8.3 G 40% / images
  No 392M 392M 0 0% / dev/shm
  / dev/sda6 23% 424 M 1.4 G 2.0 G/var
  / dev/sda5 7.7 G 81 M 7.2 G 2% /vmadmin
  vmhba0:0:0:1 91 82 G 8.5 G 90% / vmfs / vmhba0:0:0:1
  vmhba0:1:10:1 15 G 15 G 0% 7.0 M / vmfs / vmhba0:1:10:1
  63 7.7 M 63 0% G G vmhba0:1:11:1 / vmfs / vmhba0:1:11:1
  vmhba0:1:1:1 63 63 G 0 100% / vmfs / vmhba0:1:1:1
  vmhba0:1:2:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:2:1
  vmhba0:1:3:1 63 63 G 0 100% / vmfs / vmhba0:1:3:1
  vmhba0:1:4:1 63 63 G 0 100% / vmfs / vmhba0:1:4:1
  vmhba0:1:5:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:5:1
  vmhba0:1:6:1 63 63 G 0 100% / vmfs / vmhba0:1:6:1
  vmhba0:1:7:1 63 63 G 0 100% / vmfs / vmhba0:1:7:1
  vmhba0:1:8:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:8:1
  vmhba0:1:9:1 63 63 G 0 100% / vmfs / vmhba0:1:9:1
  vmhba0:5:0:1 59 G 14 G 44 G 24% / vmfs / vmhba0:5:0:1
  vmhba0:6:3:1 29 G 14 G 14 G 49% / vmfs / vmhba0:6:3:1
  37 G 35 G 1.7 G 95% vmhba0:6:6:1 / vmfs / vmhba0:6:6:1
  vmhba0:7:0:1 499 G 450 G 49 G 90% / vmfs / vmhba0:7:0:1
  7.4 G 7.3 G 180 M 97% vmhba0:9:0:1 / vmfs / vmhba0:9:0:1
  37 G 36 G 1001 M 97% vmhba0:9:1:1 / vmfs / vmhba0:9:1:1
  vmhba0:9:3:1 G 7.4 7.4 G 0 100% / vmfs / vmhba0:9:3:1
  vmhba2:0:0:8 39 G 39 G 29 M 99% / vmfs / vmhba2:0:0:8
  [root@esx011 /] # df h
  Size of filesystem used Avail use % mounted on
  / dev/sda1 3.0 G 2.5 G 364 M 88%.
  / dev/sda3 15G 5.6 G 8.3 G 40% / images
  No 392M 392M 0 0% / dev/shm
  / dev/sda6 23% 424 M 1.4 G 2.0 G/var
  / dev/sda5 7.7 G 81 M 7.2 G 2% /vmadmin
  [root@nbxva011 /] # wwpn.pl
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0
  [root@esx011 /] # cat /etc/lilo.conf
  command prompt
  Timeout = 50
  boot = / dev/sda
  install=/boot/boot.b
  linear
  default = esx

  image=/boot/vmlinuz-2.4.9-e.71smp
  label = linux
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-e.71smp.img
  read-only

  image=/boot/vmlinuz-2.4.9-e.71
  label = linux-up
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-e.71.img
  read-only

  image=/boot/vmlinuz-2.4.9-vmnix2
  label = esx
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-vmnix2.img
  read-only
  Append = "mem = 800M cpci = 0: *;" 1 : * ; 2 : * ; 3 : ; 4:5:0; 7:0; 9 : * ; 10:; 11:; 12: *; 14:; 15: *; 17:; 18: *; 20:; 21: *; 23:; 24: *; 26:; 27: *; 29:; »

  It's client server which I can not restart the server boot or HBA settings view.

  All points will be awarded.

  Thank you

  And in MUI - HBA is not shared with Service Console

• Unable to access esx host after installation via ssh

  Hi all

  Can someone tell me, why can't I access the esx host via ssh after fresh installation of esx? HTTPS access works.

  see you soon,

  City

  You can not connect or your connection impossible?

  http://KB.VMware.com/kb/1003807

  http://KB.VMware.com/kb/8375637

• enable access for a user not 'root' ssh

  I want to create user for minimal Troubleshooting on esx server 5.x and this account has the permission to reboot or shutdown server and esx with ssh access.

  
  

  but only ROOT ssh access account

  
  

  I create the administrative account but not access on ssh... only root account

  
  

  Help me

  
  

  Thank you

  
  

  Hello

  Open a client vsphere directly on your ESXi and create a local user.

  

  Then add the user to the Administrators group.

  

  You will then be able to use ssh with this user.

  

  Kind regards

  Julien.

• Change host esx, unas how many dudas

  Buenos dias, I need of vuestra couplets y experiencia para resolver dudas what unas me atanen hacer los updates del entorno vsphere. Currently I have 2 clusters con 4 esx host y unidos con a vcenter. OS Le mas o menos evolución of mi entorno. TODO empezo con esx 3.5, el ano pasado por estas fechas, el otro administrator than habia subido of esx 3.5 an esx 4.1.0 build 381591, ha pasado UN Año is y creo that there is actualizarles toca.

  Me gustaria agreed an esxi are mucho mas seguro, aunque pierda consoled her. The version of vCenter 4.1.0 build 258902 than sober is a windows 2008 r2 y con una BBDD sql2005. Are the first time that actualizare an entorno virtualizado, por lo that I need of vuestros consejos y recommandations. Manager Update sober el he estado reading algo, sober como los updates, create import base y aplicarlo. Ahora son of dudas set:

  -ahora tengo yo license vSphere 4 enterprise, con esa license could fornuis sin problemas esx an esxi?

  -Los pasos which would be? Fornuis el vCenter primero y luego ir July in modo mantenimiento cada esx host e ir actualizandolo?. Se could con hacer las maquinas VRIJWIEL? ES decir tengo 4 esx cluster por, pasaria las maquinas uno has los otros 3, ese pongo en mantenimiento, actualizo y cuando paso secured las maquinas y asi con el resto o tendría than apagar todas las maquinas y hacer los 4A the vez?

  Es a largo post, pero son dudas as siempre he tenido el poco y me gustaria me echarais una mano.

  MUCHAS gracias y a greeting

  Hola ElBielas:

  You licenses por vSphere 4 destrezas hypervisor del uses ESX/ESXi. If in algun momento eso you sigue generating instalate en UN VMware Workstation ESXi el duda y aplicale her license, you say TR o vale no vale.

  A greeting.