Entries missing tab in data controls

Similar Questions

• Bind several web service data controls on the same page

  Hello
  JDev version: 11.1.1.6.0
  I using SOAP web services. I have the following usage:
  I have the data control for the web service, that records the values entered into the form. I created the entry form using the data control (DC1).
  There is an input field [T1], on the tab, I need to fill an another text field, for which the data is returned to an another web service (DC2) data control.
  For the same input text [T1] on the tab out, I need fill in the object list in the component selectonechoice, for which the data is returned to an another web service (DC3) data control.
  
  Is it possible to use bind several data controls on the same page to reach the use case?
  However, I want to avoid the use of managed bean. Is it possible to do this?
  
  Concerning
  Fabiola

  Hello

  I can make the case to use even without the use of the managed bean?

  Yes, although the managed bean solution seems reasonable to me.

  Difficulties are

  + 1) REQ1 and REQ2 are the parameters that is common to both 1 and 3 services. +

  Text fields that provide arguments to a method are related to an input variable (file PageDef has an iterator variable in the executable section). A variable can be referenced from method arguments

  + 2) REQ1 is the parameter that is common to both 2 and 3 services. +

  Identical to 1. Create a setting for service 2 and map variables in the arguments of the method of service 3

  + 3) Service3 needs all REQ1, REQ2, REQ3, and REQ4 parameters as parameters to save the data. +

  As said, fields can be referenced from variables, dependent, the linking of the attribute fields (as I guess it is a return value in the bound field)

  There are problems of links as the same setting is available between several departments.

  It's new to me

  Is it possible to solve these problems of binding addresses?

  Yes. Make sure however that WS DC iterators you see in PageDef have their property Refresh ifNeeded for the refreshment of the bound field work properly

  Frank

• Why: Data control not extensible/empty - flow ADF based task entry on HT.

  Hi all
  
  I hope to create an ADF task flows based on a human task. I have an ADF stand-alone application in the ViewController which I want to create this workflow. The control of data entry resulting doesn't seem to be expandable.
  
  Questions
  1. When you create a Taskflow ADF based on a human task, should always be within a project in the same application as the SOA components?
  2. If not, is control of resulting data blank human task or not expandable because the xsd for the HT is based on the MDS? I have configured all MDS connections in my application.
  
  JDev: 11.1.1.4
  
  Thank you
  PP

  Hello

  Answers: -.

  1. No, it is not necessary that your ADF Taskflow based on human task should be in the same application where the SOA project. But this Taskflow-ADF deployment, to the SOA Project.You can add this project whenever you want to deploy.
  2. it may be the cause because of the Configuration of MDS.

  Do one thing, while creating the ADF Taskflow human task, you select the .task via the file system file not the MDS.
  If you select the. Your soa project task file, then it will ask you to name the Taskflow, just to name the taskflow you want and say ok.
  After you have created the taskflow, it will add a large number of xml files in your project and it will create a data control.

  It could be useful!

  Kind regards
  Shah

• Number of entry by using data control counter

  Hello
  I have a simple question :)
  I created a data control using a simple POJO class. I am trying to create a number of entries on the page counter.
  I created an int with getter/Setter in my POJO and generated the DC, but when I fall on the Joint Strike Fighter, I don't have the ability to create a number of entry counter. I tried to create an "Integer" object and a string as well, but no luck.
  
  What I create in my POJO so that when I drop, I have the option of creating a counter of the number of input
  
  Thank you

  Hello

  not all of the ADF Faces components are listed in the ADF link dialog box. So in your case, you create an inputText and then change to a counter. You can do this by selecting the counter in the component palette using the right button of the mouse and move it over the text entry field to change to become a counter. Then during the conversion of the components, then IDE shows you which attributes are changed (for example is no longer available in the new component)

  Frank

• final 3.0 - > 2.1 EA1: remove the persistent settings missing in the data tab

  Hello
  
  This cool new feature in the result set of the worksheet appears to be missing in the data of the table/view tab. This can be added?
  
  Thank you
  K.

  I thought he is most likely to the worksheet grid go wrong - where you would hit the persistent settings button to delete, compared to the tabs in the object browser (where the user does not query the grid).

  It is in the context menu on the column if headers, but it does not help when the grid is not displayed because of any disorder upward. Therefore, it is here on the toolbar of the tab of the spreadsheet results.

  Do you use it as a default restore values or when things go wrong?

  -Rambeau

• Cannot find the data control to the Web Service in the Menu

  Hello
  
  I try to call a web service in the ADF. To do this, I want to create a web service data command
  
  If I understand correctly, if I right click on the template project, I see the data control from the Web Service under layer Business > Web Services. (as indicated in 2.1 Sec-http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html#WsProxyPojoControl)
  
  However, I am not able to find this entry in there.
  
  I tried the following things:
  
  I tried with Jdev 10.1.3.5, 10.1.3.4 and 10.1.3.1
  I tried to select all available models of technology to create applications
  -Any model
  -Web Application [JSF, EJB, Toplink]
  -Web Application [JSF, ADF]
  -Web Application [JSF, EJB
  -Web Application [JSF, Struts, ADF]... .and everthing else...
  
  I still don't see the web service proxy.
  
  Then I opened the ADFToystore sample application, and I could see the service data Web controls here!... .that mean my jdev is not defective... something else is missing.
  
  So, I tried to see what libraries are selected... I saw that a library named 'Web Service Data Control' are there in the project, which is not there in the model applications project that I created. So I added this library to the project, but it still does not work...
  Next, I added all THE libraries I have seen in the libraries in the project properties section... still no luck
  
  I don't know I'm missing something basic. Can someone please help.
  
  Rgds,
  Amit

  Hi Amit,

  try to set the filter above in New Gallery to filter by: all Technologies

  Kind regards

  Branislav

• Broken tab LV8.6 control

  Hi guys,.

  I just started working with LabView a month or two ago.   I make the front of my VI to look nice and pretty, grouping and locking of the things that I went so I wouldn't keep grabbing the wrong items.  I tried to block the tab control, but when I went to unlock it, it said that it had never been locked.

  Now, I can't grasp the tab and resize/etc-it, like he was really stuck.  In addition, if I add a new element to any given tab, I lose control of it and can not resize/right click or anything.  I can drag to select an item, then delete it or move it with the arrow keys, but I'm not even those to the tab control.

  I tried locking and unlocking of the control tab, but if I play too much, I get an error message about fpsane.cpp.  It is certainly not go far, however.  Any thoughts on how I can avoid completely rebuild the façade?

  Thank you!

  PS. Here is the error log.

  ####
  #Date: Monday, March 2, 2009 12:08:47
  #OSName: Windows NT
  #OSVers: 5.1
  #AppName: LabVIEW
  #Version: 8.6
  #AppKind: FDS
  #AppModDate: 26/06/2008 03:25 GMT

  Crazy FPHP + 810F268, UID 5171, in "XY_Scanner_VME.vi" object: {identifier} (0 x 4): list (LIST)
  Crazy FPHP + 810F268, UID 5171, in "XY_Scanner_VME.vi" object: {identifier} (0 x 4): list (LIST)
  Crazy FPHP + 810EAF8, UID 5166, in "XY_Scanner_VME.vi" object: {identifier} (0 x 4): GrouperObject (DDO)
  Crazy FPHP + 810EAF8, UID 5166, in "XY_Scanner_VME.vi" object: {identifier} (0 x 4): GrouperObject (DDO)
  Crazy FPHP + 81F22F8, UID 12, in "XY_Scanner_VME.vi" object: {sub} (0x10): component (DDO)
  Crazy FPHP + 81F22F8, UID 12, in "XY_Scanner_VME.vi" object: {sub} (0x10): component (DDO)

  c:\builds\penguin\labview\branches\Saturn\dev\source\panel\fpsane.cpp(432): coolish: fatal insanities(0x00000014) are in ReportInsanities, "XY_Scanner_VME.vi".
  $Id: //labview/branches/Saturn/dev/source/panel/fpsane.cpp#10 $
  0x00F3566A - LabVIEW + 0
  0x00F35DFC - LabVIEW + 0
  0x005AA7BA - LabVIEW + 0
  0x005ABC4A - LabVIEW + 0
  0x005AB190 - LabVIEW + 0
  0x005AB4F5 - LabVIEW + 0
  0x005AB7D8 - LabVIEW + 0
  0x0100B17A - LabVIEW + 0
  0x00D57D1A - LabVIEW + 0
  0x0140C2EC - LabVIEW + 0
  0x01413AB1 - LabVIEW + 0
  0x01414F01 - LabVIEW + 0
  0x00E3A5B9 - LabVIEW + 0
  0x00DBAA01 - LabVIEW + 0
  0x00E4C69C - LabVIEW + 0
  0x7E418734 - + 0 USER32
  0x7E418816 - + 0 USER32
  0x7E4189CD - + 0 USER32
  0x7E4196C7 - + 0 USER32
  0 x 00404264 - LabVIEW + 0
  0 x 00404696 - LabVIEW + 0
  0x100014A6 - + 0 QtManager431
  67093321 - + 0 NIQtCore431 0 x
  0x00000000 - LabVIEW + 0
  0x00000000 - LabVIEW + 0
  Stack dumping bread crumbs *.
  mental health #* heap verification: 'C:\Documents and Settings\Jared Stewart\Desktop\VME\Quarknet VIs of Selex\XY_Scanner_VME.vi '.
  #** vérification of mental health: "C:\Documents and Settings\Jared Stewart\Desktop\VME\Quarknet VIs of Selex\XY_Scanner_VME.vi."
  #** compilation: 'C:\Documents and Settings\Jared Stewart\Desktop\VME\Quarknet VIs of Selex\XY_Scanner_VME.vi '.
  End Dump

  Hey,.

  I think that I managed to unlock it. If you check the box that is around the tab and send it to the back. then move the tab area. Select the entire tab control and then unlock it. It worked for me. Please see the attached VI.

• Windows could not load the NLS being missing or corrupt data.

  I reinstalled Windows Vista 32 bit on my laptop Gateway using the OEM install cd that comes with it, but now, when I boot, I have the following window:

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. To resolve this problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  Status: 0xc000000f
  Info: Windows failed to load the NLS being missing or corrupt data.

  Reading a similar post, I tried kites 3 methods of WinRE (Startup Repair, Bootrec /RebuildBcd, System Recovery) but they didn't work. I ran the WinRE Windows memory diagnostic tool and no error on my hard drive.

  I went to the gateway support site & also tried to access the recovery partition by pressing ALT + F10 to reboot, but it didn't work either. I tried pressing F8 safe mode, but I don't have the option "Repair your computer" that would have gotten me in the window of the gateway recovery management. I can't get in either safe mode, load a list of files and stops on Loaded: \Windows\system32\drivers\crcdisk.sys, then the message Windows Boot Manager window reappears again (see above).

  Reading another post, perhaps to copy files .nls of my installation on my hard drive cd would do the trick, but I don't know how to do this. I need the old data, I want to just my laptop to boot and run without having to buy a new hard drive.

  Thanks in advance for your help.

  Here is an answer I've found: http://www.eggheadcafe.com/software/aspnet/34039669/nls-data-is-missing--cannot-repair.aspx of Gary Velvet:

  I set up an instance of Vista virtual machine and copied since all the
  *.nls in/Windows/System32 files and all *.fon files of the
  Windows/Fonts.  I then put on a USB key and inserted in
  the breakage of the machine.

  I didn't know that this WindowsRE could read USB drives. It does things
  easier. I then crushed the files on the area damaged with those of the
  clean installation and a reboot took me directly in Vista.

  If may also be possible to copy corrupted files of a true Vista Installation DiskLhttp://www.vistax64.com/tutorials/261616-extract-files-vista-installation-dvd.html.

  To find out which kid are corrupt, we need to run a program to find the corrupted system files. If you use the drive, go to the prompt controls and cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files usinghttp://support.microsoft.com/kb/928228.  Try to put all the files corrupt here so that we can see if they can be repaired with good copies of the installation disc if we can identify those who go there where replace them correctly.

  Let's see how these options work before considering anything else.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot set 'DD-MM-YYYY' date control in BB5.0

  Hi all

  I'm stuck with date control in Webworks. I need set the default ("DD-MM-YYYY') in the date control in blackberry 5.0.

  It does not dispay in BB5.0. Same code works for BB6.0.

  find the code below:

  Please help me.

  Thanks in advance.

  Hello

  I'm not sure I understand. Do you mean that the fixing of the value date is not correctly displayed on OS 5?

  Note that the code you provided in your original thread lists without any quote " " dd-mm-yyyy ". The value is what is actually shown in the entry; not necesserily the date format.

  If you pass in theas you describe, it could just be the browser of the OS 6 is capable of meaning, while the OS 5 browser cannot.

  Validation W3C provides the following error message:

  Bad value dd-mm-yyyy/ for attribute value on element input: The literal did not satisfy the date format.
  

  Erik Oros

  BlackBerry Development Advisor

• Customer connection remains for the data control

  Hello

  I ve recently created an ejb rest aplication consequence with the tutorial of:https://blogs.oracle.com/imc/entry/building_simple_java_ee_rest

  It works perfectly in factor.

  Now, I want to create the client application.

  I started to make adf web application, and in the template project, I want to get the webservice through the connection still to expose it as a datacontrol to user interface layer.

  However, I m in web service data to create order Wizard, in the first step, create the connection REMAINS, I put endpoint URL: "the url I get when deploy the web service application" but when I test gives:' error received: forbidden ' or if I put the url of a method: ' received error: the source cannot be found.'

  How can I fix it, please.

  Thanks in advance.

  Carlos

  Your REST is back JSON or XML.

  The REST data control now supports only the XML responses.

  Here's a demo of use basis:

  https://blogs.Oracle.com/Shay/entry/accessing_remote_databases_from_oracle

  If you return JSON, at this point, you create a Java class that parses the JSON and then to expose this class as a data control.

• Problems to change my url endpoint data control for Web Service design time vs deploy times. Where is the url of time to deploy the "deployment configuration" stored?

  https://blogs.Oracle.com/ADF/entry/changing_endpoint_url_for_a_web_service_data_control

  Using this link as a reference, I created a data control Web Service, and when I deploy via JDeveloper for different environments I can change my point of endpoint accordingly on this screen:

  

  However when I change my point of termination at the design time, the changes do not appear in the screen "Configuration of the deployment. This would not normally be a problem, but our automated deployment (maven/ant) seems to keep picking up the url "Deployment Configuration" instead of what we change in the DataControl.dcx. So I have a few questions:

  1. Why is there a difference between what we have in the source code and what is shown on this ""Deployment Configuration "screen for manual deployment of JDeveloper? "

  2. where is this "Deployment Configuration" end point url located? I can change it during an automated deployment as I can on a manual deployment?

  3. What is the best practice to change a url endpoint to the Web Service data control with during an automated deployment?

  It turns out that the connections.xml had the url of the endpoint that the profile of the deployment and jdeveloper was referencing at deployment time.

  In order to get our automated generation work, we use a search and replace of Ant utility to change endpoint in this connections.xml before construction/deployment of the application.

• Problem with iterator and EJB data control

  My project components:

  JDeveloper 12.1.3

  Back end & the intermediate layer, JPA, EJB 3, controls data EJB

  JSF pages simple front end (no fragment), bounded task flow

  Hello

  I have a weird problem with iterators in my project, project using EJB 3 & JPA and EJB data controls

  When the user come to a page (this page is part of a stubborn workflow) and add a record to a table (linked to an iterator) and without saving changes, leave the page (means output delimited task flow)

  do something else and again back to the first page iterator always keep this line is entry and it cause problems in my system

  If I close the browser and come to this page for sure the line is not there

  I expect when the user leaving a stubborn workflow each thing belongs to this workflow should be deleted. Is this true?

  Or someone has the same problem? Any suggestions / or work around?

  Respect of

  Mohsen

  Have you read the link I posted? Have you named the BA a transactional data control?

  When you leave the workflow you issue a rllback and the new line should have disappeared.

  Timo

• How to create the data control to a custom object of sale cloud using web service.

  Hi all

  I'm working on a requirement I need to display the common custom object data and their children object. After the display of the data user will be able to select multiple records by using the check box and then update the State to close.

  So basically, I need to create a table in which the data will fill with the checkboxs and when the user clicks on the button update then I need to update a field in the parent object.

  Any help would be appreciated.

  Thank you

  You must follow the steps below

  1. right click on the template project, select the new option

  2 Select the data control in the left hand side of the tab "All Technologies"

  4 Select "control of data from the Web Service" in the right side panel

  3. Enter the name of the data control (custom name)

  4. provide your WSDL to the URL https://crm-domain.oracleoutsourcing.com/foundationCustExtn/CrmCommonReferenceService?wsdl

  5. click Next, next if all methods to winow than wsdl, mix to the right and click Finish button

  6 refresh "data control" in your right side panel to request

  7 expand control of data and select only control data that you have already given

  8. then you can see the methods that comes from your wsdl.

  9. Select the method and expand it, you will get the return values

  10. drag and drop the return as a table value, you will get the af:table on the page

  11. don't want to operatet this table.

• How to refresh 'Web service data control'

  Hi experts,

  I use Jdev 11.1.1.5, and I would like to know how to refresh a Web Service data control, when changes are made to the web service (that is, add a new method, change the settings,...)

  Thanks in advance,
  Jose.

  Hi Jose,

  Check this https://blogs.oracle.com/shay/entry/updating_adf_web_service_data

  How to change or update the control of data is created once WebService?

  Nitesh

• ADF Data Control WS - methods with 'Object' instead of native types

  Recently, we noticed a strange behavior during the integration of services SOA Suite with ADF Web Service data controls:

  -Consider a service, where the WSDL has the following operation:

  <wsdl:operation name="CreateEmployee">
    <wsdl:input message="inp1:requestCreateEmployeeMessage"/>
    <wsdl:output message="inp1:replyCreateEmployeeMessage"/>
  </wsdl:operation>
  

  - And the request message is:

  <wsdl:message name="requestCreateEmployeeMessage">
    <wsdl:part name="payload" element="inp1:CreateEmployeeRequest"/>
  </wsdl:message>
  

  - And the element in the message:

  <element name="CreateEmployeeRequest">
    <complexType>
    <sequence>
    <element name="EmployeeId" type="int" minOccurs="0"/>
    <element name="EmployeeName" type="string" minOccurs="0" nillable="true"/>
    <element name="Salary" type="decimal" minOccurs="0"/>
    </sequence>
    </complexType>
  </element>
  

  -If this service is added to a project ADF as a Web Service data control, the method in the control of data will be represented by:

  CreateEmployee(Object)
  

  -However, if you change the WSDL file, so that the element has the same EXACT name as the operation:

  <wsdl:message name="requestCreateEmployeeMessage">
    <wsdl:part name="payload" element="inp1:CreateEmployee"/>
  </wsdl:message>
  <element name="CreateEmployee">
    <complexType>
    <sequence>
    <element name="EmployeeId" type="int" minOccurs="0"/>
    <element name="EmployeeName" type="string" minOccurs="0" nillable="true"/>
    <element name="Salary" type="decimal" minOccurs="0"/>
    </sequence>
    </complexType>
  </element>
  

  -Then method of data control will be displayed as:

  CreateEmployee(Integer, String, BigDecimal)
  

  It's strange because the WSDL file is still valid, if the element root of the query has a different name of the operation (the SOA service was created using JDeveloper).

  In addition to this solution that I share, alternative would be:

  (1) create a proxy for the service and register the proxy under control data instead

  (2) to call the service, as shown here

  Is this a Bug?

  When you have an object as a parameter to a data control, you should also see a parameter created object that has simple types.

  For example, see the video here:

  https://blogs.Oracle.com/Shay/entry/calling_web_service_with_complex