Entries related to the movement commands

Similar Questions

• Hierarchy of approval for the movement commands

  Could we have a trust hierarchy to place orders allow the amount of approvals-based?
  
  The business process is the following:
  
  A good eAM work is created for electrical work. Because misfortune, foreman finds he needs 2 of section 1 of article B, 4 A, the point C and 6 of article D costs. Item was $100, $500, $250 C and D $ 300 B. Thus, the total material requirement because this misfortune is (2 * 100 + 1 * $500 + 4 * $250 + $ 6 * 300) = $3500 TTD. So now move command is generated. If the foreman does not have authorization to obtain $3500 in stores, it should go to his supervisor. Not necessarily a name, but could be a position as Manager of materials. Once supervisor approves, go command generates Slip Pick and material is delivered to the good work eAM.

  Doc sent u. This is the solution of the sample to Move approval command. You can also go through Planner set with ceiling authorized in de FACTO forces, like u said.

  Thank you
  Shishir

• Define the movement command here the record high office

  OK, I need help aliitle here. Files or programs on the desktop right click and I down a drop with controls on it opens. Example: move here, copy and two other orders only four in total. How is it applied?  Now, I can't find the fall down with orders on this subject.  Any info would be helpful thanks.

  The menu that you talk only shows up if you right-click-drag a file icon.  When you release the right mouse button, you get a choice of which passes (how you want to place the file that you are dragging).

• What is race of keyboard called the menu command with an underscore on the road M.

  I use Windows 7 and organize my bookmarks in Firefox. I want to save time by using a shot of keyboard rather than the drop with the Move command. The underlined M does not mean that a keyboard should activate the command MOVE? I tried the CTRL and the Alt with the M button nothing works. Which key allows the straight run to activate the MOVEMENT from the keyboard rather than the menu drop down. I guess that there must be a command; Otherwise, why is the M in MOTION said.

  This shortcut only works if you have the menu open in the case of the menu arrange, you need to press Alt + O and M to activate the movement.

  You can also use cut (Ctrl + X) and paste (Ctrl + V) instead.

• How can I disable the automatic move command?

  How can I disable the automatic move command?  When I choose the command move it automatically moves any element that is selected, using the previous dimension used to move something.  Big problem.

  Perhaps related to this?

  See post #14

  http://forums.Adobe.com/message/4844794

• Much more difficult to move the individual layers in PS CC 2015.1 (using the shortcut COMMAND for the move on the Mac tool) in older versions of PS

  Hi all

  I find that selecting and moving layers in Photoshop are MUCH more difficult to 2015.1 CC PS as in earlier versions of Photoshop (using the shortcut COMMAND to temporarily toggle the tool move).

  In earlier versions of Photoshop, if I had several layers and one of the layers selected in an image by hitting the keyboard shortcut CTRL-COMMAND (that I had my mouse over the image), and then selecting the name of the layer that I wanted to work with / move, I could then easily hit the "COMMAND" key (which is a shortcut for the tool MOVE) if I happened to have another selected both tool and this would automatically switch to the MOVE tool until what I released the button COMMAND key. Then I could move the layer as needed.

  Well, in the current version of the PS CC 2015.1 this shortcut (using the COMMAND to convert temporarily the MOVE tool) does not work very well the Group WHOLE layers (if I have layers within a group) is selected instead of just the layer I had chosen.

  ONLY if I actually choose the MOVE tool in the toolbar it works correctly and I am able to move the selected layer.

  Oh my God, it was so much harder to explain that I thought it would be! I hope this makes sense.

  Hi Christine Holzmann,

  It is a known problem with the latest update.

  For now, the workaround is to select the move tool and uncheck "Selection automatic Layers ' and then hit cmd as a shortcut for the move tool.

• How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  Joshua Smith

  Are you referring to the evolution of the virtual machines network portgroup of one to the other and in your case potentially issue on to another vSwitch? If so, take a look at this script: updateVMPortgroup.pl everything you do really makes a call to ReconfigVM_Task() and passing in a specification change and put to day the network in which you want to change

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• 3 related issues: slow movement; the photos are all from the first image; and no sound from the soundtrack to the DVD downloaded.

  I put a DVD in my computer. It plays fine in Windows Media Player. When I transfer to Windows Movie Maker Live, three things happen: 1) the thumbnails are all the same - the first image. (2) the movement is slow. I tried it accelerates, but it is simply not the movement in real time - either too slow or too fast. (3) the soundtrack plays for a fraction of a second.

  What is the problem and how to fix it?

  I converted DVD to WMV format. This fixes the movement of the image and I can hear the music (not quite synchronized), however the thumbnails are still just the first image. In addition, every single feature that I blow (editing, effects, forwards, etc.) the picture freezes and yet the soundtrack plays again.

  ===================================
  It is normal that video to be the first image thumbs.

  Since it was a DVD... I guess it's a big project
  and the gel could be due to a lack of system resources.
  If you wait it can dissipate.

  Some video converters are better than others... Freemake
  maybe worth a try.

  It is also possible that your video driver may need an update.

  Verify that the video driver is problematic is to
  reduce the graphics hardware acceleration:

  Windows 7 - reduce graphics acceleration
  (see following article)

  More low hardware acceleration
  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=15391
  (Windows 7 / Vista / XP / 98 / ME / 2000)

  Good luck...

• Insert variable/attribute in the SSH command?

  Does anyone know how to insert a variable/attribute in a SSH command for execution on a remote machine?

  Not directly with the workflow stock 'run SSH command '. If you look at the script of this workflow code, you will see that the string entered by the user entry control is passed directly to the run command.

  What you can try is to duplicate this workflow and add code to "twist" the input command string before passing it for execution. For example, you can consider a nice syntax placeholder for names of attribute such as % attr, you can replace it with the actual attribute name and then move the chain gave rise to eval().

  Therefore, if the user enters the following command string:

  some sample % attr1% command

  You need to convert to something like expression concatenating string to the following address (note the single quotes)

  "some examples" attr1 + "order."

  When you pass this expression to eval(), evaluate the real value of the string attribute attr1 and you'll get his command of actual string to run as SSH command.

• Problem with export history related to the incopy file

  Hi all

  I am facing problems when exporting all stories in a document as an incopy files. I use Edition-> Incopy-> export-> order stories & graphics all. The document contains a lot of out of the page text boxes and a huge related story that flows through a number of textframs linked, this real content related story. The story also contains tables and images of the arrival. When running above the export command, I get files incopy for all charts and out of text boxes box but not to the related main content.

  It is a document provided by one of my clients. I'm actually a plugin developer and have no knowledge of very deep design. I'm trying to understand what could be the possible reasons for this problem.

  I tried the same command with that two executives linked text box. It creates the incopy file. What I could have done wrong in my document. All suggestions will be welcome.

  Thank you

  D

  Again, I have encountered the same problem a few days back and understand what is happening.

  Related tagged frames of related texts that are closely linked with the xml structure could not be exported to InCopy when the xml structure has lack of start and end tags.

  This case occurs when the xml content is paid within the frameworks of related related texts, part of the content (para or image caption) is moved to different textframe unrelated. This action leaves a placeholder to the linked frame tag (used to move content back in place if ever, newly created frame has been removed) causing an inconsistency in the xml structure.

• How to UN-restrict the movement of the regions to take

  The use of Logic Pro 10.2.3, I want to spend an excerpt from a plug to another track (which is not in the same folder to take). This is the procedure I use:

  1. Make sure the quick slide is off
  2. Cuts in the region to isolate the part I want to spend
  3. Drag the region upwards or downwards to the other lane.

  This works, because the logic is binding the region so that I can spend only it other ways to take in the same take folder.

  Copy and paste also don't work. When I select the region and press Cmd + X, it will appear a notification saying "Command is not available because there is no selected event."

  Then, how should I be trying to accomplish this?

  It is possible, but not with copy - paste. It takes a little knowledge that is actually. Here it goes:

  • When you save a passage while cycling with the option 'Take the folder' selected, logic creates an audio file (record). You see that the regions themselves are just axe-upper regions of this simple Audio file. Watch the project tree, and you'll see what I mean.
  • Look at my screenshot with two folders take on two different tracks. Audio the project browser shows two audio files with the individual region
  • Suppose that you want to place the last region to take (that I wrote). If I click on it, I'll see what region located in the Audio project (marked on the right) tree

  

  • To move that take to another track and take the folder, you select this folder take (in my screenshot synth) and place the playhead in the mounting position where you want to have its starting position (see arrow).
  • Now right click on this area in the project Navigator to open the context Menu. The first command is "Add track" and it's what he does. He takes this region (do you) and adds it to the railway in the region highlight starting at the position of the read head

  

  • In the following screenshot, you can see the result, take it in the folder to the Piano track is now copied to the folder to the Synth track
  • "Caution 1: these are clones of the region", which means, in changing a (i.e. trim) will change the other too. TO avoid this, you can copy and paste the region in the first project Navigator before the command "add to the track.
  • "Attention 2: destination folder take must be long enough to"accommodate"new take" (adjust to the right) or elsewhere, the region will be places like a region independent and not end up in the folder to.

  

  This all sounds really complicated, but it's not. It's actually quite 'logic' and once you do it yourself and get the hang of it, it is actually quite simple and fast. Even if a procedure to copy - paste would be good to have.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• How can I get rid of the voice command on my iPod iOS 6.1.6

  The voice command suddenly appeared and interrupts all the time. I want to get rid of. I have been in settings and off voiceover but it makes no difference. It comes even when I turned off my iPod and when I then go to use it the battery is flat. Help, please.

  To turn off VoiceOver on iPod nano using VoiceOver gestures

  1. slide to the right or to the left with two fingers until you see or hear parameters.

  2 double-click to open settings.

  3. move your finger up or down the screen until you see or hear general, then double-click.

  4. move your finger to the top or the bottom of the screen until you see or hear the accessibility, then double-tap.

  5 move your finger up or down the screen until you see or hear VoiceOver, then double-click.

  http://support.Apple.com/kb/HT4317

• Premium HP: HP Premium - problems with the TRIANGLE_P command in the programs.

  I have version 2015 7 28 (8151) firmware and can not be updated any further because I have only the Android app.

  Maybe the next problem has also been fixed already in a more recent update, as a previous problem of mine. We'll see.

  I want a 3-dimensional triangle of the project on the screen using the advanced form of TRIANGLE_P.

  First the good news.

  The following program works:

  EXPORT experiment1
  
    BEGIN
  
       LOCAL P1, P2, P3;
  
       RECT_P();                   Clears the screen
  
  P1: = {100,100,75};
  
       P2: = {200,100,75};
  
       P3: = {100,200,225};
  TRIANGLE_P ({P1, P2, P3}, {{1,2,3, #FF}});
  GEL;
  
    END;

  Explanation: I define three dimensions 3 points P1, P2, P3 and insert them in a list in the triangle command. What are the angles of the triangle.

  In the second argument, I defined the triangle specifying these points in the first list indices, which are 1,2,3. #FF means that it is blue.

  Here is the result:

  

  It's not very spectacular, because the only thing that the program leaves the coordinate z points away and drawing of the triangle 2 dimensions resulting. So there is not a lot 3-dimensionality thereon. In fact nothing.

  Now, I'll try to do a little more complicated by the third argument, I have left aside until now. The first 2 arguments are the 2 lists of lists.

  The simplest form is a rotation matrix or list trivial-{1}:

  Syntax: TRIANGLE_P ([G], points_definition, triangle_definitions,

  rotation_matrix or {rotation_matrix or - 1, ["N"], [{eye_x, eye_y, eye_z}

  or - 1], [{3Dxmin, 3Dxmax, 3Dymin, 3Dymax, 3Dzmin, 3Dzmax}]}, [zstring])

  User manual

  The simplest rotation matrix is the identity matrix which consists of all zeros except the diagonal elements, which are 1. So I create this way M1.

  Now, I have replace the triangle command by:

  TRIANGLE_P ({P1, P2, P3}, {{1,2,3, #FF}}, M1);

  Or

  TRIANGLE_P ({P1, P2, P3}, {{1,2,3, #FF}}, {-1});

  "Two return output programs: ' error: invalid entry.

  "I tried several forms of the third argument, for example by specifying all possible sub arguments, but all what I try, I always get nothing else than: ' error: entry invalid.

  So I would like to know if if my firmware update is the cause, or I did something wrong or it is a bug.

  Hello

  I thought about it...

  The 'problem' is that, with only 3 entries in the first list and matrice matrix of a rotation, think the system, the first review, 3 3 points x, y parameters are, z coordinates for each of the 3 points. On second review, we see that they are not valid and an error. This stems from the fact that the Triangle can take so many different types of arguments and that it is not always easy to distinguish between the different forms.

  You can make sure the system interprets the input data in the form that you want to ensure that the list of the point has at least 5 Articles (even if they are not used). Then, he will work as in:

  EXPORT tt
  BEGIN
  LOCAL P1, P2, P3;
  RECT_P();                   Clears the screen
  
  P1: = {100,100,75};
  P2: = {200,100,75};
  P3: = {100,200,225};
  
  TRIANGLE_P ({P1, P2, P3, P1, P1}, {{1,2,3, #FF}}, [[0.5,1,0,0], [0,2,0,0], [0,0,1,0], [0,0,0,0]]);
  
  GEL;
  END;

  Cyrille

• The terminal commands/help shell initialization files

  A few days ago, I opened the terminal on my MBP and tried the help command. Here, I tried ls help. I was expecting to get help for the command ls, but I got this instead:

  LS: help: no such file or directory

  I know that ls , it was just try random commands on my terminal. However, after some searching on Google I realized that some people had similar problems with some commands doesn't work is not on the terminal. And most of the problems appear to be related to the shell initialization files.

  How can I fix this?

  It was just try random orders

  Orders randomly won't work. You must enter commands that make sense. "ls help" is a command to list a file named 'help' in the current directory. Since there is no file, all you get is an error message. If you want to learn how to use the shell, I suggest you only begin by reading a book or a tutorial online. I don't have a specific recommendation.

• Photo constantly order of photos in a slideshow changes no matter how many times the movements of the user the photo back to the good look at an order. Example: Bathroom Plans eventually grouped with pictures of kitchen! I have found no way to stop this o

  Apple Photo 1.3 serious problems - how can I SOLVE all these problems?

  (1) breaks down without rhyme or reason no matter where I am in the workflow.

  (2) pictures will not be Shut Down Every Time, even after several days of waiting.

  (3) aPhoto frequently badly chooses picture in the EDIT picture option, I get a picture different than the one I clicked on which is on a 100 pictures in a row.

  (4) picture constantly order of photos in a slideshow changes no matter how many times the movements of the end user the photo back to the good look at an order. Example: Bathroom Plans eventually grouped with pictures of kitchen! I have found no way to stop this weird behavior! Is there a way to stop this? If I drag the photo again some 7 additional photos in the slide show, after a minute or less, he appears again to where it was it not. !@#$%$#

  (5) If you make any CHANGES to a photo, it often changes the appearance of your complete slideshow of this picture with impatience. So you lose all this not work fix your configuration of the slide show. Even changing the order of photos once more that I had put back where they should be. !@#$$#@

  (6) photo identifies often shades of lamps and long door handles as the faces of the people.

  (7) photo made bad decisions when it comes to brightness, contrast and colors effortlessly around other than to use other software, where as with iPhoto there was a lot of workarounds. I could continue, but will save one who might be reading of this.

  I am up to date on all updates for my Mac. If anyone have REAL answers so please spilling the beans, but according to me, it's the only truth is that Apple has rolled out a product inferrer to replace an exceptional product, called iPhoto, which does not work on my new iMac computer 5K of 27 ".   If I knew what I would have chosen another computer that I use iPhoto to prepare more of fifty to sixty thousand photos in a given year and I use iPhoto to make hundreds of slideshows from it.  Are there plugins for Photo 1.3? I ask because I see where there could be Add-ons, but I can't find.

  Apple has taken a serious decision by turning his back to iPhoto and tens of millions of loyal users.

  Thanks in advance to anyone brave enough to tackle this job.

  James

  First, back up your library of Photos and hold down the command and option keys while launching Photos - repair your database - you have a corrupted database

  LN