Alignment and Listview header history

Similar Questions

• PSC 1350xi and cleaning head alignment

  I recently installed Windows 7 and need to install new ink cartridges.  My printer software is not the Toolbox to align the print heads or cleaning.  Can help you.

  Hi swilkins44,

  I checked this further and with the age of the printer it's probably why you do not have the ability to run the alignments.

  I have included a document but to manually clean the cartridge nozzle plate.

  Cleaning the area around the cartridge nozzle plate.

  This document provides information for the box tool after upgrading to Windows 7.

  I can't access HP Toolbox after you install a driver in OS Windows 7.

  Thank you.

• The life of ink cartridge and print head alignment failed

  I use an Officejet Pro 8500 A910 and did not have any problems with it until I recently changed the ink two weeks ago.

  I bought HP original on Amazon UK and after four attempts to align the print head (which fails permanently), my ink for all, but the black cartridge high capacity is exhausted.

  I havn't print all pages in full color, black only for the ebay postage labels.

  Hell this printer that consume all my ink in five attempts to alignment?

  HP will reimburse me for the color ink cartridges?

  I solved the problem.

  BUY A CANON INKJET...

  It cost me less than a new set of cartridges for the HP OfficeJet

• OfficeJet 6100: Bad alignment and calibration

  The printer was working fine. Impressions began to be wilted as weak ran cartridges. Replaced the old cartridges with new cartridges. Now the prints are bright, but desalignes.

  I right click on the printer and click "Print Options". Under 'Services', I click on "calibrate the unit. In the dialog box "Calibrate the device", I click [Calibrate] and then click [Align], but nothing happens.

  How can I get this printer HP OfficeJet 6100 recalibrated and aligned?

  Thank you...!

  Hi DVSsteven,

  Looks like first of all, let us check your alignment in the printer and the problem from there.

  This document is a few steps to your Officejet 6100 align the print heads. Go to the six solution on to halfway to the bottom of the page.

  http://support.HP.com/us-en/document/c03156019

  Let me know if this solves your problem!

  Thank you

• How can I fixed listView header in GroupDataModel.

  Hello

  I want to set my header of the listview as a guess I put the listView header in GroupDataModel (Group: ItemGrouping.ByFirstChar). and now when scroll us in listview header must be fixed on what is the current title of the item in the listview. like Blackberry Hub.

  Thank you

  You can use the sample to reach this.

  dataModel: GroupDataModel {
                  grouping: ItemGrouping.ByFirstChar
                  sortingKeys: [ "title" ]
              }
              layout: StackListLayout {
                  headerMode: ListHeaderMode.Sticky
              }
  

• Alignment of printer heads, failed to 7680

  The two print heads (HP88) have been replaced today. C/M that works very well. The K/Y seems pretty faulty. My K/Y Printhead and ink cartridges are HP brand. After completing the installation of the print heads, the window of the printer showed "alignment failed". So I ran the alignment and line tools. Still have the same error. Print only C/M.

  The Self Test diagnostic page reads for the health of the print head: good. Date at the end of the 2014-03-26 warranty and installation 2012-07-15

  I tried pluggin and unplugging the printheads. I ran the clean print heads (used too much ink). Still no black or yellow printed ink.

  I ran the utility Mac HP program and health of the print head for the B/Y now says "Fair"... It's strange how what he says good about an hour ago (it should because it's new).

  Any suggestions on what I should do?

  Mac Pro, OS 10.6.8 20 GB of ram

  HP printhead passable health utility

  

  

  Two hours later, after swapping in old (in order or return B/Y printhead to the dealer), I also get both GOOD. But it will not print black or yellow. The alignment still does not work. Don't see the magenta lines.

  

  Now it's back to the FAIR. It's really frustrating. I'll just pack.

  I had to show this. Now TWO new heads are BAD

  

  I should have done this in the first place: I just called HP technical support and the gentleman said HP can't even stand the 7680 more and the printer is probably dead. It's that old (bought in 2007). He offered to the extended 8600 Officejet more a strongly reduced guaranteed new of 3 years with free return shipping on exchanges in the my (now deceased) 7680. I'm happy to keep that thing out of landfill. Now, I must return this second set of printheads.

  Although I'm bummed to get rid of the 7680, I am impressed by the HP support to take into account the factor of the v3 and the disappointment of customers. They did everything quite transparent and somewhat painless. .

• ListView & heads

  Hello!

  I'm having some difficulty with the definition of the properties of the my ListView header.

  Here are some of my code QML:

  ListView {
              id: threadView
              objectName: "threadView"
  
              dataModel: GroupDataModel {
                  id: modelPost
                  sortingKeys: ["timestamp"]
                  grouping: ItemGrouping.ByFullValue
              }
  
              listItemComponents: [
  
                  ListItemComponent {
                      type: "header"
                      Header {
                          id: header
                          title: ListItemData.author
                          subtitle: ListItemData.timestamp
                      }
                  },
  
                  ListItemComponent {
                      type: "item"
  
                      PostRenderer {
                      }   
  
                  }
              ]
          }
  

  As you can see, what I want to do is to sort items by time stamp. But the legend must be something else: the author of the message.

  And with the current code, the question I have, is that the header shows nothing... so just the gray rectangle + the blue line. No text.

  Strangely (to me), I don't see a content in the header if I write something like this:

  Header {
        id: header
        title: ListItemData
        subtitle: ListItemData.timestamp
  }
  

  And then he does not care about the subtitle, view just the title, and the title will be the sort key: the time stamp.

  I'm not sure that, in the doc:

  - http://developer.blackberry.com/native/reference/cascades/bb__cascades__header.html

  - http://developer.blackberry.com/native/reference/cascades/bb__cascades__listitemcomponent.html

  It seems that we could do it like this. Could someone tell me what I'm missing?

  BTW, I also see in the doc that the listItemComponent sometimes have a type "listItem", but in my experience, if it's not only "item" I won't be able to choose what will be displayed in the points...

  Could you tell me why?

  Thank you!

  Hello!

  GroupDataModel groups elements, in this case of timestamp. In the header of the function data() (ListItemData in QML) returns a common timestamp for this group of items. So he has no fields such as .title etc, it is just a timestamp. The fields are available only for items.

  As there can be multiple elements in the model with a given timestamp, additional logic will be necessary to search for a specific item, for example, while reiterating the and find a first point with this timestamp.

  Regarding "itemType" and "element":

  GroupDataModel returns the type "header" for the headers and 'article' for items. This can be replaced by the implementation of the function GroupDataModel::itemType() or declaring a function JavaScript itemType() QML and returning a string different for some (or all) indexPaths. ListView uses a ListItemComponent with corresponding itemType.

• My iPad 2 is very slow.  I removed all unused applications and erased from history.  What can I do else?

  My iPad is very slow.  I removed all unused applications and erased from history.  What can I do else?

  A disclaimer clause.

  I make no warranty, express or implied, that my own procedures return EACH older iPad to a usable state, running.

  Try all of the following conditions:

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the settings app, under the Safari settings panel, tap lightly on the Panel in the right-hand turn off / disable Safari Suggestions.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!

• Display and removing the history of the internet on the router)

  Hello

  This is my first post on this Web site.

  I would like information on how to view and delete the history of the internet on a router. I have a linksys router (default SSID is AFAQ wireless) and I'd like to see the history of the internet. Above all, what are the internet sites have been opened on my router. I'm able to get on the Web http://192.168.1.1/ page but can't see all the options for display and delete the sites/pages visited.

  You can provide any help would be appreciated.

  Thanking you in advance.

  What is the model number of your router? To view the history, you must turn on the feature to save on your router. Once you connect to the router configuration page you must click on the "Administration" tab and below you have to click on the "Log" sub-tab and enable logging feautre on your router... " This will allow you to view the history of the Internet.

• Auto align and distribute objects in a grid?

  I like the align attribute and distribute 'tools', I use them all the time.

  but he has always seemed thay, they are good for a single line of objects.

  is this correct or is it possible to select a "grid" of objects and make them evenly aligned and distributed?

  

  Yes, this is where Christoph...

  http://www.scriptsrus.TalkTalk.NET/distLayers.htm

• Align the column heading in the table of the ADF in the Center

  Hello
  I'm trying to align the column heading in the table of the ADF in the centre, but not able to find any property of the table, I also tried using inline CSS but not able to achieve any success.
  Can someone help me make.

  Hello

  Try:

  -Anton

• PSC950 entrelardée impression even after cleaning and alignment of the heads

  My impressions were strips of different colors, when I print in normal mode (or project).  My ink cartridges appear to be good and are 3/4 full.  I cleaned the heads and aligned with them, but the problem remains.  Are there any suggestions as to what I can do to remove the problem?

  Eskimo wrote:

  My impressions were strips of different colors, when I print in normal mode (or project).  My ink cartridges appear to be good and are 3/4 full.  I cleaned the heads and aligned with them, but the problem remains.  Are there any suggestions as to what I can do to remove the problem?

  This would usually be caused by a problem with the interconnection.  Try cleaning the 78 cartridge and printer contacts as shown here.

• The print and print head alignment failed.

  Black ink does not print than other print colors. "In addition, message" alignment failed "shows. Printer HP Photosmart C8180.

  Hello

  Please perform the below mentioned steps that should solve the problem.

  1. Press SETUP (key tool), and then
  2. Press TOOLS, then
  3. Press the clean printhead / cleaning the cartridge.
  4. Now try printing.

  You may need to try the above steps 2 - 3 times.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as accepted Solution !
  See a great post? Give a Kudos!
  I work for HP

• OfficeJet 6500 Series E709A: aligning the print heads whenever the printer on

  Replaced print head cartridge-door and put new cartridges.  Now, every time I power the printer, he gets head alignment mode and print a correct page.  I press the OK button and the printer works correctly then.  It is the second replacement in two years.  Had no problems the first time.

  Don't know where you answer correctly on this problem that I reported.

  After trying all the options that have been proposed and did not get a resolution of the problem.

  I tried the only other possibility was not offered.  I bought another head of HP ink replacement

  which is where I had bought that does not.

  The new replacement of HP has solved my problem.  The printer works properly.

  I guess I get out of $70.00 for non-functional replacement, unless someone wishes to

  give me a contact who does not send back them on where

• Story IN Action is "approved" and PO header is in "Inprocess".

  Hi team,
  
  We are in 11.5.10.2, we order, header status is "Inprocess" and history of the action is 'approved '.
  
  We want to cancel the purchase order. Please notice no work around is to go to fix data to cancel the purchase order
  
  Thank you
  Kiran

  You can open approval from view by using IN. Summary Windows Firewall page > tools option and see where the WF is blocked?

  Generally, you can watch the WF attributes and updated who is causing the problem and Rembobiner the WF (this will insert also the current data in Action IN history) to the log sales from / stuck.
  Please post the status here once you tried/cast an eye to the WF