Entry at the invalid iOS Simulator test

Similar Questions

• Lack of Options > Advanced Options > Applications entry for the application of Simulator test

  I'm new to BlackBerry dev and I'm still doing my set up and tested development env.

  EPS consists of XP, Eclipse SDK 3.4.1 BlackBerry JDE plugin for Eclipse 1.0.0.67, BlackBerry component Pack 4.3.0.16 version 4.3.0 and the BlackBerry 8120 Simulator.

  I created a test application simple and loaded on the Simulator for testing through the cmd Eclipse Run > run as > Blackberry Simulator.  As expected, the application icon was displayed on the screen of the Applications (in the Simulator), and, when selected, the application has successfully launched and behaved normally.  So far so good.

  However, when I checked the Options > Advanced Options > Applications on the Simulator, I found that my request was not among others installed apps.  (I tried on two other simulators with the same results.)  I thought about reading the other posts on this forum that I would wait to see this information.   When I install on a simulator I would indeed expect display name information and the app version contained in Options > Advanced Options > Applications list?  If Yes, what should I do to make the information appear?

  Thank you.

  If you install your app in the Simulator simply by copying the COD file in directory of the Simulator (what is JDE when you run Debug), then you should not wait for the application to create. The modules in the files of the cod will be stil it well and that's all that generally the County. You can see the list of modules under Options-> Advanced Options-> Applications-> (Menu)-> Modules. Applications that are included in the Options-> advanced-> Applications are just constructions of metadata on top of modules to simplify various tasks, like setting permissions, adding and removing applications rather than tracking dependencies and individual modules.

  PS, You can programmatically create the entries in the application using the CodeModuleGroupManager and CodeModuleGroup if you really must have your request under Applications. Do not however forget that classic pose methods (Desktop Manager, Web OTA Download, BES OTA Push) all create them the entries in the appropriate application. So, you don't usually have to worry about this problem in the production environment.

• Is it possible to test an app DPS in the IOS Simulator

  Does anyone know if it is possible to test an app DPS in the IOS Simulator? We try to remain accessible to users of the iPad 1 for as long as possible) to test 5, 6 and 7, IOS in the retina and resolutions non-retine, which means I'm going to need 5 ipads. I only have two

  See you soon,.

  Keith

  Sorry for the delay in responding.

  The IOS Simulator seems to observe the DPI information for screens, even to change scale setting for virtual IOS devices compatible retina when you move the Simulator to a display of high resolution to normal display. As I have both, I'd get a reasonable facsimile.

  There is unfortunately no way to IPAs run in the Simulator - as I discovered it now is not imitate the environment ARM and applications have developed for the Simulator to use for testing.

  I have to go shopping...

• Black bands during export to the iOS Simulator

  Hello

  I don't understand why I have black bars when exporting to iOS Simulator on an iPhone 5, with an AIR for iOS?

  I also managed to test on my device once and ever after... And I managed to export on the device the first time, I also had these black stripes at the top and bottom.

  It's like having an iphone 4 inside an iphone 5 (which you have when you open an iPhone app on the iPad).

  On the screenshot, the image inside must take the entire screen, as you can guess...

  Thank you

  

  I finally realized thanks to this site: AIR of deploying applications on iPhone 5

  Including an image called "[email protected]" to the root of the package has worked!

• iOS Simulator launch, id: point of entry (start) undefined error

  I'm still not able to launch the iOS Simulator after update to AIR 16.0.0.245. I see the following on the execution of a debugging error message run:

  Create iOS package

  ID: undefined (early) entry point. Usually in crt1.o for architecture i386

  Compilation failed during execution: id64

  My adt settings look good, and path to the SDK (iOS 8.1) is good. Debugging on unit works very well. This occurs in a pure ActionScript project that makes heavy use of Stage3D/Starling/feathers.

  Can anyone point to some troubleshooting on this topic?

  This issue is fixed in the latest beta (16.0.0.250), please try with the same and let us know if you face any problem.

• Invalid entry in the configuration of the system on vista

  The system configuration Windows blocks always Open Office to run at startup.  The only thing is, I don't have Open Office installed on this computer anymore.  I read somewhere that I could use checking the Windows registry to resolve this problem, but this isn't a part of Vista.  The system configuration tool points to a text file I can edit to remove the invalid entry, or is there something else I need to do?

  Look for entries from startup to Open Office:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

  Autoruns has failed.  In fact I ended up doing a system restore to an earlier point in time.  I think it could work if I knew what I was doing.

  This thread can be marked as resolved; It's too much work to get it right.  Just a nuisance that I have to endure, not a real problem.  If I knew how to close a message, I'd do it myself.

• Location using the simulator tests

  I use Eclipse to develop and test a "Hello World" application I've included resources files for English and the French understand and test the localization of the application plan. I am however stuck, test the application with the french properties.

  I tried to configure a new profile in the simulator by providing "/ local en =" as a parameter of the command line in the hope that the Blackberry Simulator will use French as the default language and so the French beam will be used for rendering the user interface. There is a generation of application step I'm missing to get the location missing?

  Any help to test the localization will be much appreciated. Thank you.

  It is a fairly old article, but as far as I know, it is still correct:
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/801083/How_To _...

• Problem when deploying application to the IOS Simulator!

  Dears

  I have faced the following error when you try to deploy application (oracle application example) on iOS Simulator

  [22: 45:01] undeployment.

  [22: 45:01] - incomplete deployment.

  [22: 45:01] failed to deploy on the iOS Simulator.

  [22: 45:01] deployment failed due to one or more errors returned by 'osascript '.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 1).

  I use Xcode 6.1 and JD 12.1.3

  Thank you

  Dears

  I solved this problem by reinstalling Xcode worm 5.1.1

  Xcode 6.1 is not compatible with the MAF so far

  Thank you

• I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

  I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

  Note that iOS signature is only available on Mac. If you're on a Windows machine, you won't see the iOS tab.

  Neil

• Impossible to use iOS Simulator with the new update of February

  16 & 17 AIR worked fine with the iOS Simulator... This news throws version errors is every app installed... AIR even app that were already installed...

  I have an application that loads the external sounds to play and I get a 1009 error when I try to read.

  Thank you

  Craig

  Repair permissions and restarted... seems to work now.

• Grid infrastructure to install 11 GR 2 - size of the invalid entry

  HW/SW platform: Win 7 under a machine Virtualbox 3.2.10 with Oracle Enterprise Linux 5.5 x86_64 2 prompt guests to support the DB instance in a RAC configuration two.
  
  Here's the question:
  
  During the installation of 11 GR 2 grid Infrastructure of zip file downloaded on a Virtualbox (Linux) guest host, the process stops with the error ' Invalid input size (expected 729772, but has 729794 bytes).» After several attempts of difficulty (see below), I get the same error that only he throws different byts sizes if it seems to fail at different points in the process of randomly. So far that all take great - HW/SW/network all the pre-reqs without error (took a piece of work to get there!).
  
  I scoured Metalink, Google docs. Google shows a large number of cases where this sort of thing happened with different configs but no coherent solution is presented, nor caused already discussed. Based on my results, I tried several things but am now at a total loss for what to do. Here's what I spent the last two days, in order to work around the problem:
  
  -a confirmed the value cksum and bytes are correct before decompression.
  -installed and used a different download manager and pulled down a new copy of the file zip both my PC and directly on the Linux (PCS used in binary mode when copying the files in Win7 for Linux).
  -downloaded a third party utility zip to try.
  -reran the installation of many times (cleaned of all directories before each series)
  -created a symbolic link to point to the utility unzip in/usr/bin rather than Oracle provides with the software in case that was the problem.
  
  Anyone can shed light on this issue? This could be the cause of this rpoblem? Maybe someone has had experience of this type of fixing problem and can share what's the root casue.
  
  Here's what's installation log file (the last lines). It indicates the prcoess stopped at the first command of fastcopy...:
  
  INFO: Definition of variable 'ROOTSH_LOCATION' ' / u01/app/11.2.0/grid/root.sh'. The value from a block of code.
  INFO: Definition of variable 'ROOTSH_LOCATION' ' / u01/app/11.2.0/grid/root.sh'. The value from a block of code.
  INFO: preCopyScript running
  INFO: /tmp/OraInstall2010-11-25_11-28-26PM/mvstubs.sh
  INFO: InstallProgressMonitor: from phase 2
  INFO: Current Installation
  INFO: Current Installation
  INFO: Extraction of the files in ' / u01/app/11.2.0/grid'.
  INFO: Extraction of the files in ' / u01/app/11.2.0/grid'.
  INFO: Performing fastcopy operations based on the information contained in the file "oracle.crs_Complete_exp_1.xml".
  
  Here's what's in the error log:
  
  -# Begin Stacktrace # -.
  * ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:7566
  oracle.install.commons.base.driver.common.SetupDriverException: size of the invalid input (expected 729772, but has 729794 bytes) *.
  at oracle.install.driver.oui.OUISetupDriver.setup(OUISetupDriver.java:467)
  at oracle.install.driver.oui.SetupJob.call(SetupJob.java:166)
  at oracle.install.driver.oui.SetupJob.call(SetupJob.java:47)
  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:269)
  at java.util.concurrent.FutureTask.run(FutureTask.java:123)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:650)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:675)
  at java.lang.Thread.run(Thread.java:595)
  * Caused by: oracle.sysman.oii.oiic.OiicInstallAPIException: invalid entry size (expected 729772, but has 729794 bytes) *.
  at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:1016)
  at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:936)
  at oracle.install.driver.oui.OUISetupDriver.setup(OUISetupDriver.java:456)
  ... 7 more
  
  -# End Stacktrace # -.
  
  I really need to make this work and suspect that maybe it's a bug, but I think that anyone he said now. Any help is greatly appreciated. I will update the post tomorrow when I get a new copy of the download to another point of network access, but where this is not the problem I wanted to get this thing connected now to save time in case someone might know what is happening.
  
  Thank you very much in advance...
  
  Tony G.

  to all,

  Unfortunately, I have the same problems with "Invalid size entered" during the installation of Oracle GI V11.2.0.2 (downloaded from Oracle Support!) and Oracle GI V11.2.0.1 (download delivery).
  MD5 and sha1 after copy with scp in the guest OS aro OK license!
  I use Virtualbox 3.2.12 and my host platform is windows 7 (64-bit) with 2 guest with Oracle Linux 5.5 systems.

  any idea,

  Michael

• Debug using iOS Simulator (cvm.properties file missing)

  Hello

  I'm trying to debug your sample of JavaDemo. I already have the deploy in an iOS Simulator and I have done the job. But now I'm changing a little more sample and I would like my debugging code.

  I followed the instructions of Testing and Debugging ADF Mobile Applications - 11g Release 2 (11.1.2.3.0)
  

  Can't get to step 3 to specify the debug cvm.properties file settings. Without this clarification, I can't debug my app.

  Where is this file or how it create?

  Thank you for your attention,

  Kind regards

  Will be.

  Watch this video - https://blogs.oracle.com/mobile/entry/debugging_adf_mobile_apps_on

  You can find the cvm.properties file in JDeveloper under the accordion of application under descriptors resources.

• IOS Simulator Flash CC access problem

  Hi, after upgrading to Xcode 6.0.1 I can't test CC Flash applications, through "Control" > "test movie". I get the message "unable to launch iOS Simulator from the following location...". ».

  The path that I use (iOS Simulator SDK) is: /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S DKs/iPhoneSimulator8.0.sdk

  I use the AIR SDK 15.0.0.302

  Hi all

  Thank you for your patience. All issues related to the Simulator iOS XCode 6.x have been fixed in the latest version of Flashpromanager.new CC 2014 (Build No. 14.2.0.20) which was released yesterday.

  Inviting you to please update and try and let us know if you still face problems.

  You can update your version of Flash CC 2014 by simply going to the help > update or through Creative Cloud App.

  You can learn more about the update to Flash Professional help | Summaries news

  Rgds,

  Mukesh

• You cannot change device iOS Simulator, AIR_IOS_SIMULATOR_DEVICE ignored

  I can't get the iOS Simulator application to run as something other than the iPhone 5 when using AIR adt. I tried to change the variable of environment AIR_IOS_SIMULATOR_DEVICE of different values, but the Simulator always throws my app simulating an iPhone 5.

  I tried the following:

  setenv launchctl AIR_IOS_SIMULATOR_DEVICE 'iPad Retina.

  setenv launchctl AIR_IOS_SIMULATOR_DEVICE "iPhone 6.

  I confirmed that the setting is changed by testing:

  getenv launchctl AIR_IOS_SIMULATOR_DEVICE

  I have to restart something or something to rinse?

  I use AIR 15.0.0.289, Xcode 6.0.1 OS X 10.9.5. Is a pure ActionScript Project making intensive use of Stage3D/Starling, and I use 14 IDEA IntelliJ EAP IU - 138.2210.3 (ouch that name hurts) as my development environment.

  Raise IntelliJ IDEA after that every change of AIR_IOS_SIMULATOR_DEVICE is the only way to get this working.

  Boring, but works for me!

• Problem launching iOS Simulator with AIR 15.0.0.274

  I'm not having any luck debugging my AIR 15.0.0.274 pure ActionScript project with iOS Simulator included with Xcode 6.0.1 (OS X 10.9.5).) No iOS work debugging Simulator for someone else with this combination of FLIGHT and Xcode?

  The packing process-error with the following message:

  Uninstall the Application from the iOS Simulator

  Unknown or not supported SDK version:

  /Applications/XCode.app/Contents/developer/platforms/iPhoneSimulator.platform/developer/SD Ks/iPhoneSimulator.sdk

  Hi Grahamsmith,

  We checked the issue at our end, things work correctly.

  Could you please use following command to package and install app on Simulator.

  App package:

  ADT-package - target the ipa-test-interpreter-Simulator - shops - keystore < certificates=""> -storepass < password=""> <.ipa> <.xml> platformsdk - /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S DKs/iPhoneSimulator8.0.sdk/

  Install App:

  ADT - installApp-ios - platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S Dks/iphonesimulator8.0.sdk-peripherique ios-Simulator-package platform< ipa="">

  Launch the application:

  ADT - ios - platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S Dks/iphonesimulator8.0.sdk-peripherique ios-Simulator - appid launchApp-platform

  Thank you

  Jitender