Entry door two s in El capitan
Anyone got two bridges working in El Capitan? Is it still possible?
With two gateway is average, each interface has a bridge and both work.
read How to make for el capitan server act as a Wifi bridge
Tags: Mac OS & System Software
Similar Questions
-
What are the BCD entries to TWO instances of dual boot of Vista professional in TWO separate hard drives? -Dell Vostro 1710, my wife had to be returned to Dell, I installed its Vostro hard drive in my Dell Vostro 1710 SAME, but I don't get a menu starting double when I turn on my Vostro. (Both Vista Business operating systems are licensed separately).
I would like to start his drive hard so that it looks like 'his' office on 'his' computer.
Thanks for any advice.
The easiest way is to use the DualBoot Pro. He has the tools to write the necessary code automatically. It is excellent for managing the tasks you want to do.
However, you have a potential license problem. Even if your Dell has the exact code in the BIOS to activate the copy of Windows on the hard drive of your wife, the computer is only allowed for an OEM copy. If Dell is back after repairs then you should be OK once you have turned on the hard disk in his computer of your wife. You can delete the entry of additional start with DualBoot Pro menu,
-
Hello
I 6248, with 3 VLAN configured (1,98,99). 111 is a management VLAN.
My a x.x.x.249 switch IP address (on each VLAN I have different IP address).
to road inter VLAN, I need to set the gateway on the server/PC to x.x.x.249
When I use the gateway switch, I can access all local networks virtual reasonable.
the problem is that I do not have Internet. My exterior entry door is 106.103.1.1 and he sit on VLAN 1.
How can I 'know' switch on 'transfer' every package that should be out of the range of 106.103.1.1 of all switch the VLAN?
Thank you
Looks like you need to add a static route routing traffic outside. command should look like this.
#ip route 0.0.0.0 0.0.0.0 106.103.1.1
That should work, if not we do knowledge may need to add a route on your gateway routing traffic to the 6248, we could also examine the current configuration of the switch.
-
Photos on my new iMac won't start - get an error message after trying to fix the photo library. I just migrated all of my old iMac a new aid of Time machine backup. Both are running OS 10.11 (El Capitan).
Get an error message after trying to fix the photo library.
What does this error message say? Photos crash or exit gracefully?
Where your iPhoto library that Library stored? In your pictures folder, or on an external drive?
Try to copy the library of Photos directly without Time Machine. Connect the two Macs using your network and copy the old Mac to the new library, well as signed in on your new Mac.
Then try to open this copy in Photos.
-
What is gateway?
In terms of network, is an address on the local network, a device sends the traffic that is destined to another device on a different network.
There are some specific network gateways where traffic for a particular network is sent to say joining two known networks. A routing table tells the computer what is the address.
The default gateway is where traffic is sent when the destination network is not in the computers table. In a home network, the router's default gateway PC with no entries for each network on the internet in its table.
To a route print command prompt will list its routing table with the / pointing to the default gateway 0.0.0.0 netmask.
-
Print a daily calendar entry every two weeks
I would like to create a repetitive calendar entry that will automatically print the calendar of the day to the default printer.
This used to be very easy in the older versions of Mac OS X, but I can't seem to do with alerts current iCal.
I tried to create an Automator app or a calendar workflow.
But I can't make them work.
I can't believe that apple has taken a giant leap backwards in this respect.
Maybe you could create an entry like the one below, where 'print the calendar' is the name of a script (saved as an application) which will print the calendar of the day.
-
LaserJet color MFP M475dw 400: icons inside the entry door
On the inside of the door on the right side is a "pictogram" or icon representative a procedure which I think is what for after changing toner cartridges. I don't understand what he tells me to do.
This is what a person familiar with this "pictogram" which can describe what he tells me to do?
Any help is greatly appreciated,
Don
Correct, shows where are the doors/opening, all directions.
-
10.11.2 scrolling of two-finger trackpad El Capitan: trolling problems
Hi guys!
I have a problem since I upgraded my Macbook Air (early 2015) for OS X 10.11.2.
When I scroll through web pages in Safari (or too much Chrome), the pages are behind (especially when the scrolling slows down). The previous version (10.11.1) was OK, but the current version is terrible.
Please help me!
Thank you very much
Attila
System Preferences > accessibility > mouse & Trackpad
Click on the button "Trackpad Options."... ».
Increase the scrolling speed.
Click on 'OK '.
-
OK my programs seem to have understood copied and pirated my light money seems to be the entry door
How can I remove silverlight without having to do a full scan is a stripper
That info seems good enough and it prevents a bunch of other questions later if you can get all the information in a single message.
Why do you think that your problem has something to do with Silverlight?
Have you started having problems after you installed Silverlight?
There are several types of malware that will pop up messages saying that your system is infected (theyare the infection). Sometimes, they try to scare you by going to their WWW site and pay for help (which you won't). No legitimate program you won't change your passwords, so try not to be fooled by their disappointment.
Since there is a lot of different genres, trying to describe what the messages say it best you can since sometimes there are specific instructions to eliminate some of them.
If you can still boot, you may not need a CD quite yet - maybe you can make a copy of one from a friend later.
Try not to use the power switch, protective of surge or draw taking if you can help that might complicate things and you will need a CD. Ineterruptions of power are the last resort and the most unpleasant.
Next we make a point of departure known for malware:
Do a few scans for malware, then we can fix any problems:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
They can be uninstalled later if you wish.
The scans by operating clean, then to solve any problems.
Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
Cannot change the entry door of the Linux guest OS by the perl script customization
Default gateway Linux can be changed using script (modified from vmclone.pl) below.
Someone at - it gives help on this?
#!/usr/bin/perl -w # # Copyright (c) 2007 VMware, Inc. All rights reserved. # use strict; use warnings; use FindBin; use lib "$FindBin::Bin/../"; use VMware::VIRuntime; use XML::LibXML; use AppUtil::VMUtil; use AppUtil::HostUtil; use AppUtil::XMLInputUtil; $Util::script_version = "1.0"; sub check_missing_value; my %opts = ( vmhost => { type => "=s", help => "The name of the host", required => 1, }, vmname => { type => "=s", help => "The name of the Virtual Machine", required => 1, }, vmname_destination => { type => "=s", help => "The name of the target virtual machine", required => 1, }, filename => { type => "=s", help => "The name of the configuration specification file", required => 0, default => "../sampledata/vmclone.xml", }, customize_guest => { type => "=s", help => "Flag to specify whether or not to customize guest: yes,no", required => 0, default => 'no', }, customize_vm => { type => "=s", help => "Flag to specify whether or not to customize virtual machine: " . "yes,no", required => 0, default => 'no', }, schema => { type => "=s", help => "The name of the schema file", required => 0, default => "../schema/vmclone.xsd", }, datastore => { type => "=s", help => "Name of the Datastore", required => 0, }, ); Opts::add_options(%opts); Opts::parse(); Opts::validate(\&validate); Util::connect(); clone_vm(); Util::disconnect(); # Clone vm operation # Gets destination host, compute resource views, and # datastore info for creating the configuration # specification to help create a clone of an existing # virtual machine. # ==================================================== sub clone_vm { my $vm_name = Opts::get_option('vmname'); my $vm_views = Vim::find_entity_views(view_type => 'VirtualMachine', filter => {'name' =>$vm_name}); if(@$vm_views) { foreach (@$vm_views) { my $host_name = Opts::get_option('vmhost'); my $host_view = Vim::find_entity_view(view_type => 'HostSystem', filter => {'name' => $host_name}); if (!$host_view) { Util::trace(0, "Host '$host_name' not found\n"); return; } # bug 449530 my $disk_size = get_disksize(); if($disk_size eq -1 || $disk_size eq "") { $disk_size = 0; my $devices = $_->config->hardware->device; foreach my $device (@$devices) { if (ref $device eq "VirtualDisk") { $disk_size = $disk_size + $device->capacityInKB; } } } if ($host_view) { my $comp_res_view = Vim::get_view(mo_ref => $host_view->parent); my $ds_name = Opts::get_option('datastore'); my %ds_info = HostUtils::get_datastore(host_view => $host_view, datastore => $ds_name, disksize => $disk_size); if ($ds_info{mor} eq 0) { if ($ds_info{name} eq 'datastore_error') { Util::trace(0, "\nDatastore $ds_name not available.\n"); return; } if ($ds_info{name} eq 'disksize_error') { Util::trace(0, "\nThe free space available is less than the" . " specified disksize or the host" . " is not accessible.\n"); return; } } my $relocate_spec = VirtualMachineRelocateSpec->new(datastore => $ds_info{mor}, host => $host_view, pool => $comp_res_view->resourcePool); my $clone_name = Opts::get_option('vmname_destination'); my $clone_spec ; my $config_spec; my $customization_spec; if ((Opts::get_option('customize_vm') eq "yes") && (Opts::get_option('customize_guest') ne "yes")) { $config_spec = get_config_spec(); $clone_spec = VirtualMachineCloneSpec->new(powerOn => 1,template => 0, location => $relocate_spec, config => $config_spec, ); } elsif ((Opts::get_option('customize_guest') eq "yes") && (Opts::get_option('customize_vm') ne "yes")) { $customization_spec = get_customization_spec (Opts::get_option('filename')); $clone_spec = VirtualMachineCloneSpec->new( powerOn => 1, template => 0, location => $relocate_spec, customization => $customization_spec, ); } elsif ((Opts::get_option('customize_guest') eq "yes") && (Opts::get_option('customize_vm') eq "yes")) { $customization_spec = get_customization_spec (Opts::get_option('filename')); $config_spec = get_config_spec(); $clone_spec = VirtualMachineCloneSpec->new( powerOn => 1, template => 0, location => $relocate_spec, customization => $customization_spec, config => $config_spec, ); } else { $clone_spec = VirtualMachineCloneSpec->new( powerOn => 1, template => 0, location => $relocate_spec, ); } Util::trace (0, "\nCloning virtual machine '" . $vm_name . "' ...\n"); eval { $_->CloneVM(folder => $_->parent, name => Opts::get_option('vmname_destination'), spec => $clone_spec); Util::trace (0, "\nClone '$clone_name' of virtual machine" . " '$vm_name' successfully created."); }; if ($@) { if (ref($@) eq 'SoapFault') { if (ref($@->detail) eq 'FileFault') { Util::trace(0, "\nFailed to access the virtual " ." machine files\n"); } elsif (ref($@->detail) eq 'InvalidState') { Util::trace(0,"The operation is not allowed " ."in the current state.\n"); } elsif (ref($@->detail) eq 'NotSupported') { Util::trace(0," Operation is not supported by the " ."current agent \n"); } elsif (ref($@->detail) eq 'VmConfigFault') { Util::trace(0, "Virtual machine is not compatible with the destination host.\n"); } elsif (ref($@->detail) eq 'InvalidPowerState') { Util::trace(0, "The attempted operation cannot be performed " ."in the current state.\n"); } elsif (ref($@->detail) eq 'DuplicateName') { Util::trace(0, "The name '$clone_name' already exists\n"); } elsif (ref($@->detail) eq 'NoDisksToCustomize') { Util::trace(0, "\nThe virtual machine has no virtual disks that" . " are suitable for customization or no guest" . " is present on given virtual machine" . "\n"); } elsif (ref($@->detail) eq 'HostNotConnected') { Util::trace(0, "\nUnable to communicate with the remote host, " ."since it is disconnected" . "\n"); } elsif (ref($@->detail) eq 'UncustomizableGuest') { Util::trace(0, "\nCustomization is not supported " ."for the guest operating system" . "\n"); } else { Util::trace (0, "Fault" . $@ . "" ); } } else { Util::trace (0, "Fault" . $@ . "" ); } } } } } else { Util::trace (0, "\nNo virtual machine found with name '$vm_name'\n"); } } # It returns the customization spec as per the input XML file sub get_customization_spec { my ($filename) = @_; my $parser = XML::LibXML->new(); my $tree = $parser->parse_file($filename); my $root = $tree->getDocumentElement; my @cspec = $root->findnodes('Customization-Spec'); # Default Values my $computername = "compname"; #my $timezone = 190; #my $userpassword; my $domain; my $ipAddress; my @gateway; my $subnetMask; my @dnsServerList; foreach (@cspec) { if ($_->findvalue('Virtual-Machine-Name')) { $computername = $_->findvalue('Virtual-Machine-Name'); } if ($_->findvalue('Domain')) { $domain = $_->findvalue('Domain'); } if ($_->findvalue('ipAddress')) { $ipAddress = $_->findvalue('ipAddress'); } if ($_->findvalue('gateway')) { @gateway = split (',',$_->findvalue('gateway')); } if ($_->findvalue('subnetMask')) { $subnetMask = $_->findvalue('subnetMask'); } if ($_->findvalue('dnsServerList')) { @dnsServerList = split (',',$_->findvalue('dnsServerList')); } } # globalIPSettings my @dnsSuffixList = [$domain]; my $customization_global_settings = CustomizationGlobalIPSettings->new(dnsServerList => \@dnsServerList, dnsSuffixList =>@dnsSuffixList); my $customization_identity_settings = CustomizationIdentitySettings->new(); # identity # my $password = # CustomizationPassword->new(plainText=>"true", value=> $userpassword); $computername my $cust_fixname = CustomizationFixedName->new (name => $computername); my $cust_linuxprep = CustomizationLinuxPrep->new(domain => $domain, hostName => $cust_fixname, hwClockUTC =>"false", timeZone =>"Asia/Shanghai"); # nicSettingMap my $customization_fixed_ip = CustomizationFixedIp->new(ipAddress => $ipAddress); my $cust_ip_settings = CustomizationIPSettings->new(ip => $customization_fixed_ip, dnsDomain => $domain, gateway => \@gateway, subnetMask => $subnetMask); my $cust_adapter_mapping = CustomizationAdapterMapping->new(adapter => $cust_ip_settings); my @cust_adapter_mapping_list = [$cust_adapter_mapping]; # customization spec my $customization_spec = CustomizationSpec->new (identity=>$cust_linuxprep, globalIPSettings=>$customization_global_settings, nicSettingMap=>@cust_adapter_mapping_list); # options=>$CustomizationOptions); return $customization_spec; } #Gets the config_spec for customizing the memory, number of cpu's # and returns the spec sub get_config_spec() { my $parser = XML::LibXML->new(); my $tree = $parser->parse_file(Opts::get_option('filename')); my $root = $tree->getDocumentElement; my @cspec = $root->findnodes('Virtual-Machine-Spec'); my $vmname ; my $vmhost ; my $guestid; my $datastore; my $disksize = 4096; # in KB; my $memory = 256; # in MB; my $num_cpus = 1; my $nic_network; my $nic_poweron = 1; foreach (@cspec) { if ($_->findvalue('Guest-Id')) { $guestid = $_->findvalue('Guest-Id'); } if ($_->findvalue('Memory')) { $memory = $_->findvalue('Memory'); } if ($_->findvalue('Number-of-CPUS')) { $num_cpus = $_->findvalue('Number-of-CPUS'); } $vmname = Opts::get_option('vmname_destination'); } my $vm_config_spec = VirtualMachineConfigSpec->new( name => $vmname, memoryMB => $memory, numCPUs => $num_cpus, guestId => $guestid ); return $vm_config_spec; } sub get_disksize { my $disksize = -1; my $parser = XML::LibXML->new(); eval { my $tree = $parser->parse_file(Opts::get_option('filename')); my $root = $tree->getDocumentElement; my @cspec = $root->findnodes('Virtual-Machine-Spec'); foreach (@cspec) { $disksize = $_->findvalue('Disksize'); } }; return $disksize; } # check missing values of mandatory fields sub check_missing_value { my $valid= 1; my $filename = Opts::get_option('filename'); my $parser = XML::LibXML->new(); my $tree = $parser->parse_file($filename); my $root = $tree->getDocumentElement; my @cust_spec = $root->findnodes('Customization-Spec'); my $total = @cust_spec; if (!$cust_spec[0]->findvalue('Virtual-Machine-Name')) { Util::trace(0,"\nERROR in '$filename':\n computername value missing "); $valid = 0; } if (!$cust_spec[0]->findvalue('Domain')) { Util::trace(0,"\nERROR in '$filename':\n domain value missing "); $valid = 0; } if (!$cust_spec[0]->findvalue('ipAddress')) { Util::trace(0,"\nERROR in '$filename':\n ipAddress value missing "); $valid = 0; } if (!$cust_spec[0]->findvalue('gateway')) { Util::trace(0,"\nERROR in '$filename':\n gateway value missing "); $valid = 0; } if (!$cust_spec[0]->findvalue('subnetMask')) { Util::trace(0,"\nERROR in '$filename':\n subnetMask value missing "); $valid = 0; } if (!$cust_spec[0]->findvalue('dnsServerList')) { Util::trace(0,"\nERROR in '$filename':\n dnsServerList value missing "); $valid = 0; } return $valid; } sub validate { my $valid= 1; if ((Opts::get_option('customize_vm') eq "yes") || (Opts::get_option('customize_guest') eq "yes")) { $valid = XMLValidation::validate_format(Opts::get_option('filename')); if ($valid == 1) { $valid = XMLValidation::validate_schema(Opts::get_option('filename'), Opts::get_option('schema')); if ($valid == 1) { $valid = check_missing_value(); } } } if (Opts::option_is_set('customize_vm')) { if ((Opts::get_option('customize_vm') ne "yes") && (Opts::get_option('customize_vm') ne "no")) { Util::trace(0,"\nMust specify 'yes' or 'no' for customize_vm option"); $valid = 0; } } if (Opts::option_is_set('customize_guest')) { if ((Opts::get_option('customize_guest') ne "yes") && (Opts::get_option('customize_guest') ne "no")) { Util::trace(0,"\nMust specify 'yes' or 'no' for customize_guest option"); $valid = 0; } } return $valid; } __END__You get errors? I also recommend to check the customer that has been deployed, for linux guests, there is a log file of the customization specification and I want to say its somewhere in/var/log/vmware, but I don't remember the exact name of the file. You can see what happened in and if there is no error. Also, I assume that you have looked at the list of taken guestOSes supported for customization of comments?
-
I want to force the user to limit the entries in a textfield using only four entries unique alphabet (E, C, W or A), plus an entry of two-letter alphabet "na". I have a textfield with a limit of two characters. Right now, it is possible for the user to enter two of the same entries properly alpha. How to prevent the user to enter only a single entry, at the same time allowing the user to enter the entry "na"?
Oh OK, I thought that was simply a consequence of you only allows one entry alphabetical, never understood you wanted as a characteristic to have AutoComplete from "n" to "na".
You miswrite that last comment? As noted above, you stated that "I had hoped limit the entry of"na"in lowercase. Is it just for the entry? You want the output to always be capitalized?
If this is the case you simply remove the statement on the exit event making this.rawValue.toUpperCase (trigger) each time. And seeing you want to limit the entry for "na" to a single "n", you can delete the statement in the "verification of entry" or "na".
On change:
If (! xfa.event.newText.match(/^(e|c|w|a|n)$/i))
{
XFA. Event.change = "";
}
To the output:
If (this.rawValue == "n") {}
this.rawValue.replace(/n/g,"na")
}
this.rawValue = this.rawValue.toUpperCase)
Are you sure that this would be no 'wrong' user? willing the entry "na" and only able to enter "n"?
In your code you also have double returns 'replace(/n/g,"na") '? One off the if statement and one inside? From my point of view if one is enough. As right now it will evaluate to 'naa' in the case that the user enters "na" (I tested in a fictional form).
Maybe it's because you think you want to restrict the user to only be able to enter the "n" of single entry.
If you feel that your question is answered please feel free to mark a correct answer so that the thread will be properly tagged as well (I guess you have all the tools you need to find the exact behavior you are looking for).
Best regards, Mattias.
-
1st gateway is 192.168.0.200 for internet
and another gateway is 192.168.0.254 for leased line
I need to adjust the two entry doors by which I can use internet and access to leased lines
where I do pay gateways in windows xp professional and how much.
Hello
Try these steps and check if that helps:
a. click on start
b. click Control Panel
c. Select network connections.
d. double-click the connection that you want to work with and click on the properties button to display the information related to this adapter.
e. click TCP/IP, and then click the properties button
f. to change TCP/IP address, enter the necessary information and click on apply.
g. click the Advanced tab and add the gateway address.
You can access the link that contains multiple on the gateway configuration information: http://technet.microsoft.com/en-us/library/bb878104.aspx
-
How do Factory Reset 2010 MacBook Pro of El Capitan?
I was recommended a 'clean install' (reset factory default) by a user here to improve the speed of My MacBook Pro. However, in trying to follow the instructions provided (Figure 2), I am told that I am not so much (Figure 1). How should I proceed?
I intend to bring my computer to the Apple Store to get the battery maintenance and upgrade from 4 GB to 8 GB of RAM, as two suggested here El Capitan.
Figure 1. You cannot use this version of the application "Installer Mac OS X.app" with this version of the OS X. [El Capitan] you "install Mac OS X.app' 23.1.1.
Figure 2. Installation instructions for the installation DVD Mac OS X about restoring the computer to the factory settings said to double-click on the icon to install Mac OS X.
Reboot with the disk in the drive and press C or Option key.
(140657)
-
I can access iCloud of both devices (1 x macbook pro & 1 x IMAC, the two OS X El Capitan)-work on the macbook pro is stored in iCloud, but I can't access it from the IMAC. There is no symbol of cloud dotted next to folders - why can I not access at work?
What kind of work and how you went about saving the document to iCloud.
-
How to configure Messages with Facebook Messenger on El Capitan?
Hello!
Recently I tried to connect my account FB-Messenger Messages on OS X, using a Jabber account, [email protected] and my password Facebook. But I can't seem to connect using this method.
Any of you know how to connect two applications on El Capitan 10.11.2?
Thank you!
Hello
It is more can be done.
All ID of Facebook.chat were closed by Facebook.
They removed the Jabber server that was used for the ID Facebook.chat and the engine of their messaging inside the Facebook login regularly.
This means that the external Jabber ID and applications that can access the Jabber server that exist can discuss is more directly to Facebook users.
21:10 Friday; January 8, 2016
iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
a few iPhones and an iPad
Maybe you are looking for
-
My e709a print white or very faded.
I have a HP printer all in one single e709a. Will white print pages or extremely faded. Did all the things troubleshooting. Clean printerheads (twice), changed the cartridges (although they were not outside), unplugged, etc... Help!
-
Hey people, It's the time of year, once again, and I thought it would be fun to share a few stories of crazy holiday I have many, but one involves the Christmas party (or not) A couple of years, my wife, Carmen and I were heading to my parents for th
-
Just bought a new computer and all by familiar me with the apps I did something to the camera app when I click on it says I need to change my settings in the application. How do I do that?
-
Using Windows7 - I tried Windows10 but restored to 7.AcrobatX worked well both printing and scanning when connected to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat. In Acrobat, we don't get t
-
ORA-28575: could not open the RPC connection to the external procedure agent
Hello world Could you please help me with this problem? I am trying to configure Oracle XE 11 g for external procedures, this because I need to access certain procedures in a DLL in Delphi 6.0, but even with the simplest of the dll that I do, as a su