Entry monitor (FAQ solution did not work)

Similar Questions

• This solution did not work for me. Does anyone else have another answer.

  Since I updated to El Capitan I can't open or access my photos. I tried the

  combination keys 2 recommended, but had no luck. Received no dialog

  box to rebuild. Someone else has a solution to open the Photos?

  1 - if you held dow, key command and options all Photos and kept then downwards until the remedial order repair library you would well - you did something incorrectly as it most certainly works

  2 If you want further help you provide details for us since we can not see or read your mind

  help with a question it is possible to meet see written an effective communities of Apple Support question

  LN

• My website won't load properly in FF, but will be in IE - tried solutions - did not work

  I have 2 (1 sites cloned from the other) that the two have worked well in FF - until about a month.
  www.drydiapersplus.ca
  (landing page loading correctly in FF - but loads correctly in Internet Explorer) and www.drydiapersplus.com (load properly)

  When I try and open the site .ca - the left panel, the top panel and the right panel open properly - and the text in top... but none of the images load at the bottom of the screen in the Middle 1/2.

  I tried to empty cache, I tried CTRL F5 (hard refresh) - and none of this works.

  This is the .ca site this load IS NOT properly in FF (but fact in Internet Explorer)

  "< a href ="http://s43.photobucket.com/albums/e361/sugerray50/?action=view & current = casite.png"target ="_blank">< /a >"

  It's the American site that load properly in FF
  "< a href ="http://s43.photobucket.com/albums/e361/sugerray50/?action=view & current = USsite.png"target ="_blank">< /a >"

  edited by a moderator to fix the first two links of Hypertext - Ed

  Currently, the .ca page seems, probably because you have a static image there instead of a Flash animation.

  On the .ca, you use the full path in the EMBED tag? On the .com site, this path uses the secure HTTPS protocol. You could run a problem with the mixture of content of a domain security in the other domain. Try to bring it on the same domain or by using the same protocol used in the page.

• Unexpected error opening catalog. 3 solutions did not work

  Error unexpected opening of catalog

  This solutions (below) are unnecessary. Relocation of too useless

  Solution 1: Install the Microsoft Visual C++ Redistributable 2012

  • For instructions, see: error in MSVCR110.dll opening apps in Windows 10

  Solution 2: run Lightroom as administrator.

  1. Open the folder Program Files/Adobe/Adobe Lightroom.
  2. Right-click on the Lightroom.exe file.
  3. Choose run as administrator.

  Solution 3: change the permissions on the folder in your catalog.

  1. Select the folder to your catalog is. By default, this is your pictures/Lightroom folder.
  2. Right click on this folder.
  3. Select Properties > Security > edit.
  4. Select your user name in the user or group names section. and click full control in permissions.
  5. Click on apply, then click OK in the dialog boxes.

  Once Lightroom is open, then go to file > open catalog.

  From there, select the location of the last catalog and see if you are able to open the catalog or not.

• 6 Lightroom crashing at start up - validated solutions did not work. Help, please

  Hello

  Machine features:

  Surface Pro 3

  Intel Core i7,

  Windows 8.1,

  8 GB of ram.

  The application crashes at startup upward. Splash screen shows but when I hover over with the mouse or click on the app, I get "not responding". Things I've tried: rename the preferences file, delete the file from catalog .lock, update windows 8.1.

  All the other things I can try?

  TIA

  Ok. I guess I missed it. After trying this, it fixed my problem.

  Lightroom does not launch or closes automatically after the splash screen

• I don't know what is happening, I did a system restore and it did not work, and all my icons and files I had on my monitor have gone

  I don't know what is happening, I did a system restore and it did not work, and all my icons and files I had on my monitor have gone

  Try this to rebuild icons: -.

  Open the command prompt as administrator and copy and paste each command and press ENTER after each command:-

  • Taskkill /IM explorer.exe/f
  • CD /d %userprofile%\AppData\Local
  • DEL /a IconCache.db
  • Shutdown /r

• My malware is off how do I put this back on, I pressed round but did not work

  My malware from windows went and I don't know how to put it back on I need this to protect my computer I pressed turn back on but did not work

  It is in windows security alerts

  Thank you

  Hello

  Malware is BAD and infects your computer

  do you mean Windows Defender which protects you FROM malware?

  If so this read below information; But if this isn't the problem, give accurate and detailed information about your problem and the exact name of the program:

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Unable to get out of safe mode, your solution does not work

  went into SafeMode to solve a problem of flash player. now I can't get out. I tried solution in the help section. did not work. uninstalled the program. and the new downloaded version. did not help.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• I lost my bootcamp partition after update to El Capitan (solitary method T did not work for me!)

  I lost my bootcamp partition after update to El Capitan (solitary method T did not work for me: () is lost forever?)

  I can't access my files or the partition from the finder

  My bootcamp partition size is 380 GB.

  This is all the information on the situation:

  sudo TPG - r - vv show disk0

  

  sudo fdisk/dev/disk0

  

  diskutil list

  

  sudo-l/dev/disk0 Gdisk

  

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  

  Sudo gdisk/dev/rdisk0

  

  in IPARTITION

  

  My bootcamp partition is referred to as a free space

  in the finder

  

  Thanks a lot for your help!

  How do you have a 100 MB NTFS file system and free space after the partition of 100 MB. You have a MSR (100 MB), but your windows are the current MSD.

  SIP is activated. Your MBR has no bootable entry, because it is not marked. Please describe in detail what steps were tried.

  What is the year/model of your Mac?

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• new version of the BIOS did not work

  Hi, I updated the BIOS of my HP Pavilion dv7-3079wm Entertainment Notebook PC F11 to F13 but it did not work properly (I downloaded the file from the HP site). I need the old version (F11), if any of you have it, because it is not on the site of HP.
  or if you have a link or a solution for the proplem. Thanks in advance.

  Ghassan hamza

  Hello

  For BIOS problems, contact HP or ask their Support Forums.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• After updating IOS 10, hands-free BMW did not work

  After updating IOS 10, hands-free BMW did not work

  If I want to launch an appeal, all thinking looks like normally, but after 5 to 8 sek. the call will be abort. so I can't use the hands-free system!  Others with the same problem?

• button refresh Foxfire did not work when clicked on for the past two weeks

  button refresh Foxfire did not work when clicked on for the past two weeks

  Hi, see controls customize Firefox, buttons and toolbarsand click on restore default settings.

  If this does not help, Try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• moving data from Thunderbird to a new computer did not work - help, please!

  I - I hope! -followed all instructions Support of Thunderbird on moving a profile from one computer to another with a different OS (save a copy of the profile of the first computer file, download and install TB on the new computer, find the 'Profile' folder and then either paste the contents of the old profile file in the new profile file [thus overwrite the latter]) then open TB... but it didn't work.

  I then tried the same thing, but with a slightly different method: I copied the name of the new profile file, he has given the profile of the old computer file, then renamed the new file profile and pasted the old profile file - now with the new designation - in the new directory... which also did not work.

  I spent a few hours trying to get this to work and am almost to the point of giving up on tuberculosis as an e-mail.

  Any help would be welcome!

  Hi, Matt;

  Thank you for your continued support - I appreciate it!

  Yesterday, I downloaded the command-line tool dbx to eml unless you had kindly recommended (at http://code.google.com/p/undbx/ ), and, as I had supposed, its function is to do what OE itself can only do by email - that is, convert a .dbx .eml format - but do it by folder, records forever, which is much more elegant.

  The tool dbx to eml was very easy to download and use, and I could ask him to convert all my files at once (which is equivalent to more than 50 records and hundreds of emails). He did a great job, and I was able to identify the location of the output directory that results anywhere I wanted.

  Because the tool dbx to eml records records converted to any specified location, one can then import them into Thunderbird Thunderbird either on the same or another computer.

  I wanted to spend all my email OE to a new computer (which involves a passage from XP to Windows 7), and, in my case, it was easy to do because I have two computers connected by a network (intranet) data drives: after you convert all the OE dbx eml files, I went to my new computer to Thunderbird instance and , using the add-on for Thunderbird Import-ExportTools (https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/), I simply imported saved eml files, one at a time. It has worked flawlessly.

  In a situation in which two computers were not connected by a network, we could easily save the eml on a USB output directory and have computer of the new Thunderbird import eml from this location.

  I would also add that this dbx to eml command-line tool is supposed to also function as a current backup utility: it begs for find and convert new files later in OE, and it only will not do, but is also their corresponding folders in the original output folder, if they exist from a previous operation.

  I still have to import all my newly created on my Windows 7 Thunderbird eml files, but - so far - it seems like it should work smoothly.

  Based on the different methods I did research - and the few that I actually tried - has my reviews, so far, is that using the tool of command line without dbx-to-eml, at http://code.google.com/p/undbx/ , is the way simpler and more reliable to move files from email Outlook Express - within their corresponding e-mail folders - to Thunderbird , either the same or different computers.

  It would be nice if Mozilla could try this method for themselves, and - if they are to find it as infallible, as I - promote this as one of the first methods to use to move electronic mail Outlook Express to Thunderbird. It others will save a lot of time and frustration.

  Matt - your kind and generous support made it happen: thanks!

• I really hate this version 23.0 requires me to have the band to tabs. I want to remove it. I tried to install version 22 of the archive, but it did not work.

  I rarely use tabs; When I work, I prefer individual browser windows. For a single window without tabs, tabs band is clutter and space wasted. Previous versions of FF has allowed me to remove the tape to tabs in the options. Now on v.23 I can't. How very, very boring.

  I tried to install the previous version, v.22, from the archives, but it did not work. I would be grateful a way to remove the band to tabs in v.23, or further instructions for down to v.22

  Thank you.

  The following may not be the only or most effective way to get the view you want, but that's what I saw recommended so far.

  You can ban the entire tab bar, or when only several tabs are open, by using a setting in the Tab Mix Plus extension.

  Please see this answer for more information: https://support.mozilla.org/questions/963676#answer-464257

  Tab Mix Plus extension: https://addons.mozilla.org/firefox/addon/tab-mix-plus/