new version of the BIOS did not work

Similar Questions

• I need to update the screenshots for a new version of an app existing Itune application to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  Copy the contents of the cd in a desktop directory.  install from this directory.

  or

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I'm from the Argentina and I bought an Iphone in Miami 2 weeks ago. When I arrived to my country, I realized that the iphone did not work. There is no Apple store in the country of mi, but I am going to the Uruguay in the next few days. Can I change it he

  I'm from the Argentina and I bought an Iphone in Miami 2 weeks ago. When I arrived to my country, I realized that the iphone did not work. There is no Apple store in the country of mi, but I am going to the Uruguay in the next few days. Can I change it here?

  # Given that the iPhone was purchased from the United States which is the place you can have anything done using the guarantee. You or your agent must submit to Apple in the United States, because Apple does not accept foreign shipments.

• I want to cancel my account.  The exporter did not work, and I would like a refund while I'm still in my 30 days.

  I want to cancel my account.  The exporter did not work, and I would like a refund while I'm still in my 30 days.

  Thank you, Tiffany G.

  See ces.html http://helpx.adobe.com/x-productkb/policy-pricing/cancel-subscription-acrobat-online-servi

• Is there currently a Camera Raw plugin for Photoshop CS for the Nikon d-600? tried to download version 7.3, but did not work

  Is there currently a Camera raw plug taking in charge the d-600? I tried to download version 7.3, and it did not work!

  You have photoshop cs (photoshop 8) to 2003?

  If so, what operating system are you using?

  In addition to the upgrade to photoshop cs6 or by subscribing to the creative cloud, you can probably use Adobe's DNG Converter to convert your nikon D600 naves in best dng, which should then open in photoshop cs.

  You must have the 2.4 for DNG camera to work in photoshop cs raw plugin.

• ΗP - 15-r124nv (ENERGY STAR): ΗP - 15 r124n - tune can not install a newer version of the Bios (sp72062)

  Hi all

  I have a problem installing the BIOS via HP assistant. It starts to download the latest version of Bios (110 Ko..), and finally the HP Assistant fails to install the bios.

  what I've done: uninstall the old version of HP assistant and install a more recent version.  The problem continues to insist

  Any idea or suggestion?

  Concerning

  Georgios

  Geokok

  Welcome to the Community Forum of HP.

  Comment

  Your computer Support pages:

  HP laptop - 15-r124nv (ENERGY STAR)

  Reference:

  Updated the BIOS

  It is the opinion of the Expert that you shouldn't depend on HP Support AWizard when it comes to BIOS updates.

  According to other factors in the system at the time when the HPSA trying to hit your system with an update of this type; the results could be... other than expected.

  You can set 'Notification' HPSA to prevent it from trying to update your BIOS.

  DON'T update the BIOS when you see an update in your Web page of the computer AND that this update can be used to provide a fix for a problem that you have discovered in your system.  In other words: If your computer is happy, do not update the BIOS just because you think it would be a good thing to do.

  If you decide to update your BIOS

  • Make sure that ALL backups are up-to-date and complete - this means that everything you need to restore the system in case something goes wrong.
  • Understand that even when you do everything exactly right, you can end up with a bricked computer, that is an expensive paper weight.
  • Make sure you have at least your critical data on some form of external backup.
  • Unplug the USB drives and other useless material.  Desktop keyboard and mouse can stay connected.
  • Always run power cable to update the BIOS, never on the laptop battery
  • Touch the system during the update is underway
  • Optional: Leave wireless ONbutton. You could turn off the router to ensure that there is no interruption.

  If you still get into trouble, see: restore the BIOS

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Tecra A10 - update the BIOS does not work on Windows 7

  Upgrade the BIOS for TECRA A10/M10 and Satellite Pro S300/S300M to v1.90 version using P0065v190.exe (bios 20090304141534) fails with the message:

  "The [error] BIOS update is not taken in charge of operating system. No support for operating system or service pack is installed. »

  Note: Running as Administrator returns the same error.

  Probably Windows 7 only is not supported but, it must be explicit protection since the release of Vista should work in 7. There is no update setting to jump this protection?

  BIOS update is designed and tested for some OS. Win7 is not on the market and now Toshiba offers tested BIOS updated for Vista only.
  Sorry, but what else to say. You probably know how supposed BIOS updated and it can be dangerous. So do not play with this and do not untested experimenting with such things.

  Win7 will be placed on the market in a few months and Toshiba will start a public support. You can wait a few weeks isn't it?

• How to check the version of the BIOS is not damaged on Equium A60

  I have another thread in regards to IEEE 1394 host controller usually start and other strange questions for Equium A60.

  Regarding above, I feel THAT BIOS can be altered that I cut two pins to get rid of power according to the tried and tested instruction on another site, the BIOS password. Properly deleted BIOS password! Password requirement has occurred after that the computer is not used for a long time. Maybe the short circuit with a paperclip to cause corruption of the BIOS? Computer note seems to maintain time and date so battery CMOS OK?

  Can I reflash the BIOS or require special equipment? Any help appreciated more

  Hello!

  Why would you say that the BIOS is intact?

  If you have downloaded the BIOS Toshiba it s not intact. Toshiba doesn't offer these BIOS versions, they would be tested before.

  The BIOS (for example with an older version), you can reflash t. This can make an ASP (authorized service provider). If you wish, contact your local ASP. Only, they know to do this and will not get such textbook because it s a user to user forum.

  Good bye

• Sound does not work, the troubleshooter did not work

  is not its workload is using push wrong can not detect a problem and im getting low static

  Original title: does not work its volume is help push bad cannot detect the problem and im getting low static

  Hello

  1 did you changes to the computer before the show?

  2. who is the operating system installed on the computer?

  3. What is the brand and model of the computer?

  4. can't you hear all the sounds of Windows?

  I suggest you perform the steps described in the article:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I also suggest you to provide more information about the issue so that we can better help you.

  I hope this helps.

• Aspire Switch 10, new Version of the problem "does not start.

  Hello! I read through all the relevant threads and have not found a problem exactly like mine. I tried all the troubleshooting solutions but none worked.

  I had my Tablet for two weeks, works perfectly.

  My tablet was low on battery so I plugged it. I saw that he was in charge. Then I left it for about three hours. When I came back, it was off. Well, he seemed off. Except the blue light was turned on, the power button.

  I tried clicking on things, but nothing appeared on the screen. I tried clicking the power button... nothing.

  So I went online and verified solutions. I can't charge the battery, because of my model. I was able to turn off by holding the power button, but it will start. Instead, when I disable and click the power button again, the blue light (not orange) turns, but that's all. Just the light blue, no other indication of life.

  I tried to increase the volume, power, power + volume DOWN, home + volume, the pinhole reset button...

  They successfully all the 'turn it off', but nothing lights up it back.

  So, I tried one last thing, running down the power. After a while with the blue light on, warm up the screen. In fact, he got hotter than usual. But NOW, I'm afraid to keep the battery running down like that, because it "s more hotter and hotter. Is it dangerous for her to be too hot?

  Is there something else I can do?

  Thanks in advance! I loved my Tablet while he was fully operational, so I'd like a solution.

  normally, it will start the BIOS, reading your report, can be a dead LCD screen or the bad mother.

  If you are still under warranty, give Acer service a call.

• the 32-bit version of the plugin does not work after filterSelectorParameters

  Hello!

  I have a working version of the 64-bit plugin tested PS CC 2015. It manages only the filterSelectorStart and the filterSelectorAbout, and it works well. To compile as a 32-bit version, that I modified the caviggia file from

  CodeWin64X86 {'PluginMain'},

  TO

  #ifdef _WIN64

  CodeWin64X86 {'PluginMain'},

  #else

  CodeWin32X86 {'PluginMain'},

  #endif

  Then I compiled 32-bit version of the plugin and have started testing in PS CC (not 20xx, just CC). Before I tried to debug plugin has caused an error in allocating memory, debugging showed me this call stack.

  WHY is it produces, why 64-bit plugin works well and 32 bits can not? I tried to maxSpace value 0 or a low value, but in any case filterSelectorParameters branch has been called, and then there was an exception in the depths of the PS.

  Please help me fix this strange problem. Thanks in advance!

  Thank you very much Tom for assistance!

  During the long search I found a core of the problem: it is my love for the __stdcall calling convention. It looks like PluginMain must be __cdecl, so if you like __stdcall too, set at least CC of PluginMain to __cdecl. No other problems were detected.

• After loading vista sp2, the dvd did not work.

  Updated the driver so it works (open 1 time) but now not ejector opens. Eject Gets an error message. DVD is a dh-16w1s hh sata 16 x dvd +/-rw

  Try to re - download and re-install the latest updates of your DVD ROM drivers If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I restored my files Carbonite - or thought I did - but they can't are not there - I thought I found the right file - please help! The steps did not work!

  I thought I found the right file to restore my files of Thunderbird for... or so I thought... This is the file with 8 random characters...
  Anyway, the tech of Carbonite had restored the files in a folder on my desktop. I copied the file and paste this file to Thunderbird.
  As the files are being restored, the system I warned that thousands of files were the same... I said to replace.
  I deleted my profile e-mail and closed before Thunderbird I did all that. Then I returned to my email account. But the restored files aren't there. Only my Inbox since the transfer. No old emails, no record, no contacts...
  I don't understand what I am doing wrong?

  Just wonder if you copied it into your profile as a subfolder or if it replaced your profile?
  How did you create your backup?
  What is a full copy, a partial copy or a compressed copy (zip)?
  You copied to "C:\Users\Regina\AppData\Roaming\Thunderbird\Profiles\9k2py1g1" which, you profile should have ended .default
  I guess it was a typing error in.

  Only if your 'Thunderbird restore' was a complete copy or if you develop a one zip

  For not to destroy anything try:

  • Rename your old profile fx 'X9k2py1g1. Default X"or move.
  • Copy your "Restore Thunderbird" (I think that it contains a folder with subfolders 9k2p1g1.default) so C:\Users\Regina\AppData\Roaming\Thunderbird\Profiles contains a new 9k2p1g1.default

  Try restarting Tbird

• New router now the printer will not work wireless

  The printer is a HP1102W. Operating system is windows 7. At & t installed a new router is a netgear 7550. I tried several times to get the printer to work wireless but just cannot make it work. Not very food to computers so I could really use some help.

  Thank you

  Hello

  Please follow the instructions below to fix:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Kind regards.