USB 3.0 not good results

Similar Questions

• Explain Plan shows not good results.

  Hi gurus,
  
  Please help me understand under question.
  
  Whenever I have do explain plan on any sql statements he says as explained but when retriving explain plan output it shows same results again and again.
  
  DB - 11 GR 2 Stand alone
  ASM - configured.
  OS - RHEL 6.2.
  
  
  SQL > select count (*) in the t2114;
  
  COUNT (*)
  ----------
  639292
  
  SQL > explain plan for select count (*) from t2114;
  
  He explained.
  
  SQL > @?/rdbms/admin/utlxpls.sql
  
  PLAN_TABLE_OUTPUT
  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Hash value of plan: 1497650422
  
  ----------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  ----------------------------------------------------------------------------------------
  | 0 | SELECT STATEMENT | 6634. 524K | 2993 (19) | 00:00:01 |
  | 1. SORT ORDER BY | 6634. 524K | 2993 (19) | 00:00:01 |
  | 2. TABLE ACCESS BY INDEX ROWID | T2210 | 6634. 524K | 2947 (17) | 00:00:01 |
  |* 3 | INDEX RANGE SCAN | T2210_T | 6842. 108 (22) | 00:00:01 |
  ----------------------------------------------------------------------------------------
  
  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------
  
  3 - access("T2210".") C490008000 ' =: SYS_B_0 AND "T2210".» C490009100 ' =: SYS_B_2.
  (AND "T2210". ' C301363300 '= TO_NUMBER (:SYS_B_1)).
  
  16 selected lines.
  
  
  SQL > explain the plan for
  2. SELECT T2114. C1 FROM T2114 WHERE ((T2114. C1000000001 =: 'SYS_B_0') AND (T2114. C536871442 =: 'SYS_B_1') AND (T2114. C536871477 =: 'SYS_B_2') AND ((: "SYS_B_3" - T2114.)) (C3) > =: 'SYS_B_4') AND ((: "SYS_B_5" - T2114.)) (C3) < =: 'SYS_B_6') AND (T2114. C1000000217 AS: 'SYS_B_7') AND (T2114. C536871478 <: 'SYS_B_8')) ORDER BY C1000000161 DESC,: 'SYS_B_9' ASC;
  
  He explained.
  
  SQL > SELECT * FROM TABLE (dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Hash value of plan: 1497650422
  
  ----------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  ----------------------------------------------------------------------------------------
  | 0 | SELECT STATEMENT | 6634. 524K | 2993 (19) | 00:00:01 |
  | 1. SORT ORDER BY | 6634. 524K | 2993 (19) | 00:00:01 |
  | 2. TABLE ACCESS BY INDEX ROWID | T2210 | 6634. 524K | 2947 (17) | 00:00:01 |
  |* 3 | INDEX RANGE SCAN | T2210_T | 6842. 108 (22) | 00:00:01 |
  ----------------------------------------------------------------------------------------
  
  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------
  
  3 - access("T2210".") C490008000 ' =: SYS_B_0 AND "T2210".» C490009100 ' =: SYS_B_2.
  (AND "T2210". ' C301363300 '= TO_NUMBER (:SYS_B_1)).
  
  16 selected lines.

  In the future, please do not use * on object.
  Use the owner, object_type, object_name
  You avoid output unreadable in doing so.

  In the output that you show, you would need to know where the PUBLIC synonym points, by querying dba_synonyms or all_synonyms.
  If she SYS. Plan_table, you can drop ARADMIN. PLAN_TABLE.
  If there is no PLAN_TABLE SYS, you have to solve this problem.

  -----------
  Sybrand Bakker
  Senior Oracle DBA

• Tecra S1: USB Ports do not work correctly

  That one of my USB ports work correctly - that next to the DVD player. The two rear appear to be defective. Sometimes, they will work, but usually isn't. I have a Microsoft Notebook Optical Mouse and when I plug it into one of the ports back, it lights or control the cursor in Windows XP or Linux, but it does not work in the port on the side.

  I tried it with different settings of the BIOS for example disabling USB legacy mouse, KB and floppy and COM and parallel ports, but it did not help.

  There must be some kind of life in the faulty ports, because when I plug the mouse in all running Linux (I don't know where to look for the error logs in Windows), I get a series of error messages like this:

  USB 2-1: new device using uhci_hcd and address 2 low speed USB
  USB 2-1: error reading/64, device descriptor - 71
  USB 2-1: error reading/64, device descriptor - 71
  USB 2-1: new USB device of low speed using uhci_hcd and address 3
  USB 2-1: error reading/64, device descriptor - 71
  USB 2-1: error reading/64, device descriptor - 71
  USB 2-1: new device using uhci_hcd and address 4 low-speed USB
  USB 2-1: device not accepting address 4 not, error-71
  USB 2-1: new USB device of low speed using uhci_hcd and address 5
  USB 2-1: device not accepting address not 5, error - 71

  Post edited by: ngolian

  Hello

  Try to remove all the USB ports on the Device Manager, and then restart the device. Check again the ports with different USB devices. If the result is the same, it must be a hardware malfunction. Maybe the contacts!

  I'm afraid that the appliance must be sent to the service. :(

• HP 15-r002se: USB port does not

  I have a problem with my laptop [HP 15-r002se] all three 3 usb ports do not work, or even detect that something is plugged, I tried techniques to conquer the problem by the system of formatting and reinstalling windows 8 32-bit where I found myself without success, because I can't able to get compatible drivers of troubleshooting. Then I go to the usb ports even on windows 7 64 bit does not. and finally, format and install windows 10 64-bit, I downloaded the drivers from hp website, but unfortunately when I run the downloaded software sometimes nothing appears either to the pop-up a message on the error or continuation and sometimes it shows this kind of error after it finished extracting

  

  Finally with the help of pilots pack that I managed to install all required drivers but finally arrived with NO SUCCESS, yet neither the operation of the usb port. Here is the screenshot of my device manager.

  

  Please, I seriously need your help to solve this problem, because I am a student, I can afford to buy another laptop earlier

  Hi @Mustapha_Musa,

  I read your message and please try the following steps. A brilliant work has been done by trying these steps. Kudos to you on this point. It's a problem of clear material with the device. The USB ports are defective, the motherboard should be replaced. you will need to contact HP telephone support on this subject for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  The workaround, for now, is the following: If you have a USB port on the device that works, then you could buy a USB port extender and connect it to the port good work.

  Then you connect other devices to the USB port extender. This way multiple devices may still be connected to the computer.

  Just to say thank youPlease click the ' Thumbs Up 'button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Thank you and have a great week ahead.

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• L50-B-137 - USB satellite feeds not Versa Laser Engraver

  Hello

  I'm having a problem, you can be able to help.
  I just bought Satellite L50-B-137 to replace my previous Tosh, who died a few weeks after 4 years of good and loyal service.

  However, the new laptop does not seem to be able to feed the laser engraver that I use with it.
  I tested the laser and all software associated with work on another machine and everything works fine, so it must be the laptop that is having problems.

  When I plug the laser in one of the laptop USB ports is not recognizing the device and after what this either, a few minutes to a few seconds, it switches off the laser engraver swtching machine off the coast (this is normal on a shift).

  I tried to change power-saving features and giving all delays ever but I still have the same problem.

  It seems to me that there is not enough power coming through USB to operate the laser.

  Any ideas?

  Thank you
  Acko.

  Did you test all USB ports, including two ports placed on the right side?

• WNR2200 Netgear ReadyShare USB storage does not

  I have trouble getting the USB ReadyShare working on my router Netgear WNR2200 storage. If I reset the router to factory by using a paper clip and now the reset button in and then just connect a computer to Ethernet, 1 Port, it works fine and I can access by typing just "\\readyshare" in windows Explorer. Unfortunately I can not leave the router with its factory settings as it is not good for my network, I disable DHCP, because it's the 3rd router on my network. The router itself works great when I do that, all the computers connected to have a connection to the internet and can also connect to each other etc... purpose storage readyshare file sharing no longer works. It's just as if she is not there.

  While I was trying to experiment when he actually stopped working, so I reset the router to factory settings and started again. Connected to the computer first to 1 Port Ethernet and it worked fine as before. Went in the router settings and turned off DHCP and it has always worked well. It is only when I actually connect the router to other routers which ReadyShare USB storage stops working. When it is assigned an IP address from my main router which is the DHCP I guess? I don't know why that's upsetting it well? I checked on the same workgroup (a setting that I didn't notice initially) but also makes no difference.

  Does anyone have an idea what I am doing wrong? I guess it is just configured wrong and it's probably something really simple, but I can't see it. Any help would be much appreciated, thanks!

  Simon

  Change the LAN IP is affecting an IP address on the WNR2200 to be in the same range of main router.

  You will be able to change this in the LAN Setup.

  The steps would be:

  1. do you have a computer just be directly to the WNR2200 and nothing else.

  2. navigate to the router admin page.

  3. change the LAN IP to a unique IP address, such as 10.0.0.200 or one IP address that is not used in the network.

  4 disable DHCP.

  5. once the settings are saved, connect the main router to one of the WNR2200 LAN ports.

  From there, you should be able to access the USB key.

  Let me know what happens.

• USB controllers do not work

  I recently bought a 250 HP (F0Y78EA) G2 with Freedos SO portable.
  I installed Windows 7 32 bit.
  I noticed that the three (two 2.0 and a 3.0) USB ports do not work.

  Usb device is not detected. In 'Device Manager' usb controller shows in other devices.

  Windows Update cannot find the driver.
  I tried to download some drivers from HP with no result.

  Can you help me solve this problem?
  Thank you and best regards.

  Ciao:

  It is very difficult to find a USB 3.0 driver.

  But it's one you need...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=23734&keyword=USB+3.0&lang=eng

• Satellite A10 s203: USB ports does not work

  Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...

  Hello

  If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

  Good bye

• USB keyboard does not work laptop computer whis Satellite A100-012

  I have install WinXPpro and my usb keyboard does not (id error 10). I have try 3 different usb keyboard. Other usb devices are working normally.
  Windows XP Home Edition reanimation keyboard drive works normally.
  I have install the chipset and latest bios drivers. What can I do to make my keyboard work in WinXPpro?

  Hello

  Don t know why the USB keyboard may not be recognized, but I recommend suite solution:

  1. click on start
  2. right click on my computer, click Properties
  3. click on the Hardware tab
  4. click on the Device Manager button.
  5 expand the Universal Serial Bus controllers section.
  6 right-click every device under the Bus USB controllers and click on uninstall to remove them one at a time.
  8 restart the computer and let the operating system reinstall the USB controllers.
  9. plug the removable USB storage device and perform a test to ensure that the problem should be solved.

  good luck buddy

• Why USB-6501 does not install on Win7?

  We are in a process of migration of the old XP machine test system to the new system of Win7. All but got properly installed USB-6501. After you install LabView / DAQmx and connection USB-6501 windows could not find the drivers for this device (poster the exclamation sign on the icon of the device in devices and printers). MAX 4.7.4 detects either of the device. I looked for similar scenarios on the Forum OR and abroad and tried the solutions proposed. Nothing worked for me. I know the issue isn't with the USB-6501 material because it is functional on the old system. 4.7.4 MAXLE Win7 system detects a very well (GPIB-USB-HS) different USB device, but not for USB-6501.

  I hope someone can help us identify the problem that we have struggled with for some time. Here are the differences between shipments of software on two systems:

  Old system:

  OS - XP SP3

  LabView - 7.0

  DAQmx - 8.0

  VISA - 4.4.1

  MAX - 4.5 (detects the GPIB-USB-HS and USB-6501.) Status on 6501 LIGHT flashes continuously)

  New system:

  OS - Win 7 Enterprise

  LabView - 7.0

  DAQmx - 9.2.2

  VISA - 5.0.3

  MAX - 4.7.4 (detects only GPIB-USB-HS. Status on 6501 LIGHT flashes 3 times and then road)

  Germano,

  The device has been appear in Manager devices, but with the yellow exclamation mark for no drivers found/expenses. Update drivers on the property page does not help.

  So yesterday I spent most of the day removing all facilities OR according to the instructions, I found in this forum. Then I reinstalled the software OR in the order following, restarting after each installed:

  (1) LabView 7.0

  (2) DAQ 8.0.1

  (3) NEITHER-488. 2 (v2.30)

  (4) connected USB-6501 first. The installation of the device has gone well and is now detected to the MAX!

  (5) connected GPIB-USB-HS. Scanned for changes on the hardware, peripheral GPIB presents itself to the MAX, but with a weird name announcement its INF file on his behalf. See the screenshots below:

  GPIB device incorrectly installed:

  

  GPIB device properly installed:

  

  The strange thing is that this GPIB device was fully functional on my previous installation (see attachment max_report_3-23 - 11.pdf), now reinstall after its unusable (see attached max_report_3-24 - 11.pdf). Looking for GPIB instruments to help Max returns no result, but if I reconnect GPIB-USB-HS to the old system of PC all instruments are detected (for instrument scan error message see attached MAX after reinstall.jpg).

  That my new problem is not related to USB-6501, maybe I should open a new forum thread.

• I'm tryin to update my computer... I keep getting code and the error 646... I need help I am if confused as to what to do to get these updates... I tried to disable my firewall, but which is not good... Help, please

  I'm tryin to update my computer... I keep getting code and the error 646... I need help I am if confused as to what to do to get these updates... I tried to disable my firewall, but which is not good... Help, please

  Download and install the update/s who is / are relevant to your computer manually.
  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=974771&displaylang=en&stype=s_basic

  TaurArian [MVP] 2005-2010 - Update Services

• We need a manual imagePASS-S2. Searched online with no good result. Found sales.

  We need a manual Canon imagePASS-S2.  Searched online with no good result.  Found the manual of sales.  We will create the imagePASS-S2 soon.  TY

  Hi sscaffa!

  Thanks for posting in the Forum! Canon does not provide direct support for imageRUNNER the serial products, but your dealer will be able to help you! If you do not have a reseller, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide you with dealers who are in your area.

• My USB ports do not recognize my external devices

  Hello

  My USB ports are a complete mess. My external drive and my USB is not recognized in one of the ports, my mouse is recognized only in 2 of them, my cam and my mobile are recognized throughout. The external drive, USB key, and mouse already worked in all ports, but stopped working after I sent the PC to the store; Apparently, they did do a very good job.

  Could you help me please? The main problem is that I have everything in my external drive and cannot transmit information of my laptop anywhere.

  Thank you...

  Hi ZukaRashid,

  Thanks for the replies.

  Now let's see if from the information that you have provided the best way to help.

  Since you are on XP, this question would have been better served at the XP forum, but we will work with you from here to find solutions.

  Here are some articles to the Knowledge Base that may apply to your situation:

  • Please do not forget to back up all critical data and create a system restore point before you follow the steps below.

  Troubleshooting articles:

  One or more USB devices may not work when you start your Windows XP-based computer

  USB port may stop working after you remove or insert a USB device

  Peripheral input USB do not work in Mode safe mode or Real Mode

  For your information items:

  Basics on development of device drivers universal serial bus (USB)

  Please follow the troubleshooting steps that are listed in the articles and keep us informed on this issue.

  I'd preferably starting with PORT USB CAN STOP of WORK AFTER YOU REMOVE or INSERT A USB DEVICE.

  Thanks again for the announcement in our discussion group.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.