Environment variable is not set after the installation of oracle 11i...

Similar Questions

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

  Original title: xp does not start after the installation of avira

  I have a HP Slimline s7410
  XP Home Edition SP3
  I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
  I have a cd/dvd drive of work.
  I don't have an XP bootable installation CD

  My system worked well until: I installed the free version of Avira

  Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
  I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

  Here's what my BSOD looks like:

  Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

  Any help is greatly appreciated! :)

  My first suggestion is to do a system restore at this time point.

  second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

  third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

  Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

  so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

  fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful

• LIP does not work after the installation of a local language, writing in my windows software 8

  LIP does not work after the installation of a local language, writing in my windows software 8

  

  This icon is hidden... and there is no preview in the installed LIP.

  
  I hv uninstall the software, but for the LIPS does not work

  Hello

  You use the Microsoft Account or Local user account?

  Create a new user account and check the status of the question in the new user account.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  You can also refer to:

  User accounts: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

  Thank you.

• My CC of LR 2015 stops right, "do not answer", after the installation of windows 10. What should I do?

  My CC of LR 2015 stops right, "do not answer", after the installation of windows 10. What should I do?

  This means that a problem with the graphics card.

  You update your graphics card drivers?

• can not start after the installation of 10 Windows via bootcamp OSX

  Hello, I need help.

  I tried to install 10 Windows via bootcamp, and I did it successfully with no problems. However, after the installation, I restarted my computer, hold down the option key and tried to boot into OS X, but it won't work. It would be a symbol that boot lead me to windows 10!

  all solutions? I do not have a backup of my files under OSX, I lose my files?

  NOTE: when I formatted the partition for windows, he said not bootcamp next to him, but it is clear that the partition that I had to format, it is the same size that I decided to make Windows when I was in bootcamp in OSX + it was empty at 100%.

  UPDATE 1: so I managed to get into the recovery of the internet and deleted the partition that had the windows and install OSX Marverix instead (temporarily) also, I fixed the hard drive MACINTOSH HD, but now I can't boot it at all when I press the option button during the priming of the mac. all solutions?

• Server does not start after the installation of the USB bootable, ESXi

  Hello

  I installed VMware ESXi 5 on a SSD drive using a bootable USB key, but my server does not automatically start since the SSD after installation. I can boot ESXi in the offered by the BIOS boot menu.

  The startup configuration is perhaps incorrect because during the installation of the USB drive is present, but after the installation, it is not?

  Also has anyone seen this problem?

  Kind regards

  Gijsbert

  Updating the BIOS on the DQ77MK at 49, and you should be able to start - UEFI must never be activated.

• Error 404 - not found - after the installation of Essbase 11.1.2.2

  Hello
  
  I encountered error.
  
  I have a box of PMC 11.1.2.2 using Windows 2008. After the installation of Foundation and configure it, there is no problem at all. I can open workspace and interop as well.
  However, I added Essbase, installation and configuration of it. But after installing Essbase, I managed to turn it back on Hyperion Sharing Service, it did not work.
  
  The error that says:
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  
  What I did is also a reconfiguration of shared services, Essbase. But no luck at all.
  Does anyone have any idea, please advise. Thank you.

  Sometimes, this error may be because the data source details are incorrect that I showed you yesterday in WebLogic.
  I don't know how you managed to cause questions to the Foundation after the addition of essbase as I do not have the process that you did.

  If I go to WebLogic and change the user to the EPMSystemRegistry data source and then start the server EMP service the same errors are generated.

  <15-Jun-2012 08:32:58="" o'clock="" bst="">
  ".>

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• Some Java applets do not work after the installation in silent mode, resolved in tilting head "enable Java content in the browser" - why?

  We have about 1 800 workstations with Windows 7 (32-bit and 64-bit) running different versions of JRE Java 6 update via update 7 51 32.  Most are on 6 45 update.  We would like to standardize on update of Java 7 51 (32-bit) and get everyone updated to this version for security reasons.

  For the last two weeks, we had trouble with our driver prior to installation.  What we are seeing, it of that our procedure successfully closed all open Internet Explorer Windows and processes related to Java, uninstall all older versions of JRE Java and says then successfully installed of the update of Java 7 51.  The Java Control Panel works.  We can even take Internet Explorer to check the Java Version or Java Tester - what Version of Java are you running? and confirm that the Java applets on these sites load (although the latter only works after adding the site to the list of site exceptions); However, when the testers try to access our system Kronos Workforce Central 6.3.10, used by this system Java applets do not load.

  We tried the following things, which none worked:

  • Empty the Internet Explorer browser cache and cookies.
  • Clear the local Java cache.
  • Restart the computer.
  • Reset Internet Explorer settings, including personal settings.

  Go to the Panel control Java, ranging in the Security tab, uncheck "enable Java in the browser content", the only thing that works based on apply, press OK in the pop-up window, checking the box "Enable Java in the browser content", press OK, press OK in the pop-up window and then restart Internet Explorer.  It is only after this point, all Java applets, including those used by Kronos Workforce Central 6.3.10, work.

  What I need to know, is how I can automate the reset procedure from the box "Activate Java content in the browser" after installation, or I'm something wrong or missing a step in automatic installation that is originally for this?

  We use Microsoft SCCM 2007 R3 to perform this upgrade, and everything is run on the client computer by using the SYSTEM account.  First of all, the "javaclean.ps1" PowerShell script is run, with part of the process of command line change of the strategy of running script PowerShell for Bypass.  This script handles the closure of Java-dependent applications and Java deals and uninstall older versions of Java.

  javaclean.ps1:

  #Find all Java products, excluding the automatic update that actually is uninstalled when the main installation is removed.

  write-host "If you are looking for all versions of Java installed" - ForegroundColor yellow

  [table] $javas = Get-WmiObject-query "select * from win32_Product where (name as" Java % ' or name like '% of Java (TM)' or "J2SE %") and <>the name «Java Auto Updater»»

  If ($javas.count - gt 0)

  {

  write-host "Java is already installed" - ForegroundColor yellow

  #Get all Java processes and kill them. If java is running and processes are not killed then this script will call a restart suddenly.

  [table] $processes = Get-Process-name "Java * ' #-erroraction silentlycontinue

  $processes += get-Process - name "iexplore" #-erroraction silentlycontinue

  $processes += get-Process - name "firefox" #-erroraction silentlycontinue

  $processes += get-Process - name 'chrome' #-erroraction silentlycontinue

  $processes += get-Process - name "jqs" #-erroraction silentlycontinue

  $processes += get-Process - Name "jusched" #-erroraction silentlycontinue

  $processes += get-Process - Name 'jp2launcher' #-erroraction silentlycontinue

  If ($processes. Count - gt 0)

  {

  foreach ($myprocess to $processes)

  {

  $myprocess.kill)

  }

  }

  #Loop through the Java products installed.

  {foreach ($java to $javas)

  write-host "Uninstall" $java.name - ForegroundColor yellow.

  $java. Uninstall()

  }

  }

  Once this script is complete, SCCM calls a script VBS "install.vbs" to perform the installation of Java JRE 7 day 51.

  install.vbs

  '* ********************************

  '*

  ' * Script: install JRE 7 routine

  '*

  ' * Date: 14/03/14

  ' * Author: [REDACTED]

  ' * Rev: 1.0

  ' * Notes:

  '*

  '* ********************************

  '--------------------------------

  ' / / / Common

  '--------------------------------

  Set objFSO = CreateObject ("Scripting.FileSystemObject")

  Set objWshShell = CreateObject ("WScript.Shell")

  «Get the system architecture»

  Protected colSys: Set colSys = GetObject("WinMGMTS://"). ExecQuery ("SELECT AddressWidth FROM Win32_Processor", 48)

  Dim objSys

  For each objSys in colSys

  If objSys.AddressWidth = 64 then bolIs64Bit = True

  Next

  'Get the operating system

  Dim colOS: Set colOS = GetObject("WinMGMTS://"). ExecQuery ("" Select * from Win32_OperatingSystem ", 48")

  Dim objOS

  For each COS in colOS

  If left (objOS.caption, 20) = 'Microsoft Windows 8' then

  bolIsWin8 = True

  WScript.Echo "win8.

  End If

  If left (objOS.caption, 22) = "Microsoft Windows 8.1" Then

  bolIsWin81 = True

  WScript.Echo "win81."

  End If

  Next

  ' Set 32-bit directory program files

  If bolIs64Bit = True Then

  strPFILES = "Program Files (x 86)".

  strSYSDIR = "SysWOW64".

  Else strPFILES = "Program Files."

  strSYSDIR = "System32".

  End If

  ' Set repertoire_windows

  strWIN = objWshShell.ExpandEnvironmentStrings("%windir%") "

  'Set the current directory ".

  strCurrentDir = objFSO.GetParentFolderName (Wscript.ScriptFullName)

  ' Set computer name

  strCompName = objWshShell.ExpandEnvironmentStrings("%computername%") "

  '--------------------------------

  ' / / / Main script

  '--------------------------------

  '--------------------------------

  ' / / / Installation using .msi & capture exit code

  '--------------------------------

  ' intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\package.msi" "" & "TRANSFORMS =" "" & strCurrentDir & _)

  ""\transform.mst"" "ALLUSERS = 1 Reboot = ReallySuppress/SB»(, 8, True)"

  ' wscript.quit (intExitCode)

  ' * COMMANDS RUN HERE *.

  "Create the folder structure if it does not already exist

  strFullPath = 'c:\Windows\Sun\Java\Deployment' "

  "How many levels are there in the path?

  nLevel = 0

  strParentPath = strFullPath

  Do until strParentPath = «»

  strParentPath = objFSO.GetParentFolderName (strParentPath)

  nLevel = nLevel + 1

  Loop

  ILevel = 1 to nLevel

  "Path of directory to the iLevel level to understand

  strParentPath = strFullPath

  For j = 1 To nLevel - iLevel

  strParentPath = objFSO.GetParentFolderName (strParentPath)

  Next

  ' Is it exist directory? If not, create it.

  If objFSO.FolderExists (strParentPath) = False Then

  Set newFolder = objFSO.CreateFolder (strParentPath)

  End If

  Next

  "Kill process

  objWshShell.Run "taskkill /F /IM iexplore.exe", 8, True

  objWshShell.Run "taskkill /F /IM firefox.exe", 8, True

  objWshShell.Run "taskkill /F /IM chrome.exe", 8, True

  objWshShell.Run "taskkill /F /IM javaw.exe", 8, True

  objWshShell.Run "taskkill /F /IM java.exe", 8, True

  objWshShell.Run "taskkill /F /IM jqs.exe", 8, True

  objWshShell.Run "taskkill /F /IM jusched.exe", 8, True

  "Copy deployment files

  objFSO.CopyFile strCurrentDir & "\deployment.config", "c:\Windows\Sun\Java\Deployment\", True

  objFSO.CopyFile strCurrentDir & "\deployment.properties", "c:\Windows\Sun\Java\Deployment\", True

  "Disable UAC".

  ' If bolIsWin8 or bolIsWin81 = True Then

  "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop t REG_DWORD 0 f d", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM v EnableLUA /t REG_DWORD /d 0 f", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM/v ConsentPromptBehaviorAdmin t REG_DWORD 0 f d", 8, True"

  "End If

  "Install application".

  intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\jre1.7.0_51.msi" "IEXPLORER = 1 AUTOUPDATECHECK = 0 = 0 JU JAVAUPDATE = 0 WEB_JAVA = 1 ALLUSERS = 1 Reboot = ReallySuppress/qn", 8, True ")

  "Enable UAC".

  ' If bolIsWin8 or bolIsWin81 = True Then

  "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop /t REG_DWORD /d 1 f", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM EnableLUA /t REG_DWORD /d 1 f v", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM v ConsentPromptBehaviorAdmin /t REG_DWORD /d 5 f", 8, True"

  "End If

  WScript.Quit (intExitCode)

  '--------------------------------

  ' / / / Installation via .exe on network

  '--------------------------------

  "objWshShell.Run" "" "& strCurrentDir &"\Setup.exe"" s - sms - f1 "" "& strCurrentDir & _"

  "" "\setup.iss" "-f2" "" & strWIN & "\Temp\Install-app.txt" "", 8, True

  "Need to turn off the security warning opening the file first.

  Set objEnv = objWshShell.Environment ("PROCESS")

  objEnv ("SEE_MASK_NOZONECHECKS") = 1

  ' intExitCode = objWshShell.Run ("" "& strCurrentDir &"\jre-7u45-windows-i586.exe"" /s /v "" / norestart "& _)

  ("" "TRANSFORMS =" "" & strCurrentDir & "\Tribe-jre7.mst" "", 8, True)

  ' WScript.Quit (intExitCode)

  ' * COMMANDS RUN HERE *.

  "Then turn it back on.

  objEnv.Remove ("SEE_MASK_NOZONECHECKS")

  '--------------------------------

  ' / / / Features

  '--------------------------------

  Help on this issue would be much appreciated!

  It turns out that it is actually a problem with Kronos Workforce Central.  We had the parameter 'site.java.plugin.CLSID.familyVersion' as an application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the CLSID Java Java 6.  After update this value to "clsid:8AD9C840 - 044F-11 D 1-B3E9-00805F499D93" (the universal CLSID of Java), this problem does not occur when the automatic upgrade of Java.

  We also have good Java 6 and 7 in our environment and did during our implementation of Kronos, so I don't know why we used the Java 6 CLSID in the first place.

  Detective Conan!