Envy 13 t: reset Touchpad

Similar Questions

• Envy 15 t-3000 touchpad failure

  Envy 15 t-3000

  Failure of Touchpad: touchpad is no longer operational; turned off/turned on light TP (and tap for her area) does not work; the TP does not appear in the device under "mice and other pointing devices" Manager as it used to. I ran the latest drivers (sp56909) TP unanswered resulting. I can't find any help through the HP Support Assistant

  When running it I noticed that if I click on view devices in Device Manager, Synaptics PS/2 port Clickpad appears with a yellow exclamation mark on it.

  So I deleted the drivers and the DevMgr.Then device, I ran the Setup again SP56909 driver. The installer showed complete, but now, the TP does not show even in hidden mode. I tried to install the driver of SP56909 once again: no difference.

  Hi mickietee,

  Try to perform a hard reset on your laptop.  Take a look at this thread and let me know if this can help,

  Good luck!

• 13 - j002dx: HP ENVY x 2-reset of the BIOS password

  I have a HP Envy X 2 which is asking to specify a password to enter BIOS setup. I apparently lost the password. I am able to start windows, but cannot enter the bios setup. How can I reset the password?

  After you have entered the incorrect password three times it gives the stop code: 50495488

  @TURBO_NERD

  Enter 45593408

  Kind regards

  DP - K

• HP ENVY M6-1105dx: Synaptics Touchpad freezes briefly after typing

  The touchpad of my HP Envy M6 1105dx hangs for several seconds after you type on the keyboard, each time. This problem started after I upgraded to windows 10. My drivers are up to date. I tried to uninstall and reinstall the drivers, but that has not worked. I would rather not reinstall windows if I didn't, so I decided to come here. All advice is appreciated.

  Hey, I had the same problem and it's really frustrating.

  Here's what I did to solve the problem, I hope it helps.

  Open 'Control Panel' by clicking on search and enter the control panel.

  Then, open "Synaptics Touchpad", it will have a version number after it I think. Mine did.

  Then click Advanced in the upper tabs.

  Then you should see that a "filter activation time" set it to zero seconds.

  

  Test now by typing and then move the mouse and see if that fixes the problem... it's me.

• Envy 17-n153nr touch: Touchpad leaves no left right buttons works

  I just bought this laptop Envy.  It doesn't have a physical right mouse under the touchpad button.  The area of the bottom of the touch pad does not work like buttons.  I went into settings/mouse, but it does not show how to do the touchpad works like these 2 buttons.  How to activate these buttons?

  Yes that solved my problem.  In fact you spread the corner of the touchpad to click the button located below.  Thank you.

• J053ea HP Envy 17 - using the touchpad and keyboard simultaneously

  I just bought the laptop of HP Envy 17 in Windows 8.

  One problem I have is when running games such as Call of Duty, I need to be able to use the touchpad with the keyboard to control the game properly.  It seems that, once I have a key that is pressed, the computer does not accept any entrance of the touchpad until I release the key.

  Will there be an option in the Panel, maybe I need to change to enable the simultaneous entry of keyboard and the touchpad?

  Thank you.

  Hello

  This problem may be caused by a touchpad setting which is intended to avoid any accidental activation - for example if your Palm brush the touchpad when typing.

  You can change this as follows.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.

  The hardware/software version will depend on real option that you're looking for (see the example below), but it is usually called 'check' Palm or Smart Sense'-disable this function and apply the changes.

  

  Kind regards

  DP - K

• HP ENVY 15 t-J000 touchpad Windows 7 driver, please help

  Hello

  I want HP ENVY 15 laptop t-J000, I went down to Windows 7, and now the touch pad buttons does not have what to do... When I uninstall the driver from Device Manager and reboot the laptop, it installs the driver auctimatilly and it works before restarting another... Please give me correct driver or configuration, I have the Synaptics pointing device driver...

  driver reads as follows:

  Synaptics PS/2 Port Compatible TouchPad

  Help, please

  Hello:

  See if the W7 x 64 driver works 15 t - J100.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127735-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• HP Envy dv4 Notebook PC Touchpad not responding

  Hello

  All of a sudden I lost my touchpad. It is no longer allows her to follow my mouse movements. The power toggle button touchpad seems not too much work. I can't turn or no more. I rebooted my system a couple of times with no result. Also tried to uninstall Synaptics Pointing Device Driver and later installation of the latest version without any positive impact. Will be great if you happen to have any suggestions.

  Hello

  It is always interesting to try the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• HP ENVY 15 Notebook PC: Touchpad and erratic cursor movement problem

  My cursor shows erratic all over the screen movements while trying to move from one place to the other. This happens when I use my touch pad to control the cursor. After showing the erratic movements, it starts clicking Cesti on the entire screen. Clicks are random, and the movement of the cursor is also random.

  I tried to update my driver and everything, but the problem is still not fixed. Help regarding this situation is very welcome.

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing difficulties to solve problems with your laptop Touchpad

  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

  Please click on this link to find several troubleshooting steps to solve this problem

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• HP envy 17 Laptop: disable touchpad snaptics

  After the upgrade to Windows 10 snaptics touchpad is more deactivated. The option to turn off if a mouse is active has been in the mouse via a check box settings, but this option is no longer there.  So, how is - a disables the touchpad. I use a HP Z4000 wireless mouse. Snaptics Touchpad V1.1.  10 64-bit Windows.  Any help is appreciated.

  @geraldfont,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• Portable Envy 17 F7T68EA #ABU: Touchpad does not / not cursor

  I have recently purchased this laptop to replace my very old desktop computer and am still meet with her and W8.1 o/s.  Just tried to connect a keyboard and wireless mouse (classic HP Wireless Desktop game) and lost the cursor and all the functions on the touchpad. The wireless keyboard/mouse don't show any children successful login message, and no error message. The mouse worked briefly and jerkily with a delay of 5 seconds, the keyboard did not work at all. The only way I could figure to close the machine that I couldn't in the settings menu without the touchpad works was to hold down the power button until the light went.

  Have you tried a wired mouse, but while the laptop acknowledges that it is plugged in (it beeps at me), which does not work either. Have also tried a "hard re - set" i.e. Remove sector and battery and hold the power for 30 seconds, but nothing helped.

  Any other suggestions welcome!

  Thank you very much.

  Hey @Womblemeister,

  If you click on the Windows key or flag of the keyboard and just start typing the properties of the mouse, it will show you a screen to restore the default values. If you just keep the tab you will come to this tab.

  If it does really not just plug a USB mouse to restore the settings.

  Thank you.

• Laptop HP Envy M4 - no reset windows product ID 8

  After a reset on my laptop HP M4 after it crashed, windows 8 cannot be activated anymore.  However, there is no product ID.  Already done some troubleshooting and some research online, but still cannot do.

  Has seen many posts here with similar problems but have seen no problems yet.  Need help from you guys.

  Thanks for the update on the issue.

  Activation of the phone works in most cases, however, as 8.1 Windows came pre-installed on the computer, unfortunately you will need to contact the manufacturer of your HP computer to get the product key.

  Hope this information is useful. Thanks for posting for further assistance, we'll be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• HP Envy 6-1010us: resetting the BIOS password

  Can someone help me, I don't know the BIOS password, and I have a 59842754 system disabled.

  I was trying to get into the BIOS, because my laptop says no it does not find a hard drive.

  Help, please

  Hello

  Come in:

  46720390

  Concerning

• HP Envy: How to reset my laptop to factory setting?

  I want to whisk all my data from my computer before giving it away. How can I do this?

• ENVY 15-k211ne: "Synaptics TouchPad Driver VERSION: 15.1.6.64 REV: has '-download page not found

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02733811&DocLang=en&docLocale=en_US&...

  Oops. We cannot find this page for you!

  Try this link:

  http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50718.exe

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.