Envy 15 t: using a USB key as the recovery media

Similar Questions

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• USB key contains a recovery media - I can save other data on this USB key?

  I saved a recovery media on a 32 GB USB flash drive. Recovery media occupies only about 10 GB to 32 GB flash disk.

  With 20 GB left, I like to use the remaining space for the conservation of the docs/pix/vids using the Windows ReadyBoost feature.

  I wonder... can I use this USB (containing the recovery media) for other things?

  Please let me know.

  My computer information: HP Pavilion p6877, Windows 7 (64 bit) desktop PC.

  It is not recommended that you store other files on a USB flash drive or use it as a Windows ReadyBoost device. You can use for these functions, but you run the risk of corrupting the image of HP recovery.

  Frank

• I used my USB key to work and computer encypted here my files. Now, he won't open all files on my PC at home. What should I do to recover my files?

  I used my USB key to work and computer encypted here my files. Now, he won't open all files on my PC at home. What should I do to recover my files?

  Hello

  You will need to work with the IT Department. to work to get the files not encrypted on the disc so that you can
  use the disk and the files at home. "" They could add ability to encryption of your system at home
  If you need that and they allow it.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

  Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

  Hello

  It is possible in some cases - Adpater, power and the ability to read the disc
  are the issues.

  Check with the manufacturer of phone and the USB key and their forums.

  How to: use your USB with the Nexus 7 [root]
  http://www.androidcentral.com/how-use-your-USB-flash-drives-nexus-7-root

  For phones Windows ask in this forum and check the support.

  Answers - Windows phones
  http://answers.Microsoft.com/en-us/WinPhone

  For other phones check with their Support and Forums.

  Support of SanDisk and Forums (and others) would be a good source of info.

  SanDisk - Support
  http://www.SanDisk.com/SanDisk-support/

  SanDisk - Forums
  http://forums.SanDisk.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Windows vista USB flash drive installation AND recover the WINDOWS KEY from the recovery disk

  Hi all

  I formatted my laptop some time ago. Now I want to reinstall windows vista (came along with my laptop). The thing is due to a problem that my CD drive does not work so I would like to install windows vista by using a USB key. Can you get it someone please let me know if this is possible... If Yes, how I've go ahead make a bootable USB.

  As someone can tell me if there is a way to retrieve the WINDOWS KEY from the recovery disc.

  Thank you.

  Hello

  This can help, but you will need a Vista system to create the working bootable USB key:http://www.askvg.com/how-to-create-bootable-usb-drive-to-install-windows-vista/

  As for the product key, it should be on a sticker on the laptop (usually on the bottom). If it is not readable, contact the manufacturer for further assistance. As we said already, the product key is not on the installation disc.

  Replace broken laptop optical drives is not too difficult, you can see this as another option.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• [not resolved] At boot esxi USB key, but the key is broken, how to recover?

  Hi all

  I installed a host vmware esxi 3.5 starts using a USB key.

  My problem is that the key has been broken.

  I have reinstall a new key with the same version of esxi 3.5 and assigned the same IP address to the host.

  Should what steps I follow to host my comments towards the top and run again?

  Thanks a lot for your help.

  It's not good

  Are you sure that your storage space is not the original problem?

  If you start from USB, and the key fails, ESXi will continue to function until you restart the box. ESXi RAM tracks

  If your storage space is 100%, you can try the following

  Advanced settings under configuration if I remember correct:

  EnableResignature change to 0

  Replace disallowSnapshotLun with 0 as well.

  A new analysis of the storage card at least 2 times

  Change the values back to 1 if it works

  Concerning

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate. Thank you.

• Installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Rufus can create a bootable copy instead:

  

  Rufus - credit: Pete bastard/Akeo

  After installing Rufus:

  • Launch it
  • Select the ISO Image
  • Point to the file ISO for Windows 10
  • Check create a disk bootable using
  • Select GPT partitioning to EUFI firmware as the Partition scheme
  • Choose FAT32 NOT NTFS as file system
  • Make sure that your USB in the device list
  • Click Start
  • Close when you are finished

• Can we use this product key on the back of the laptop for the activation and the windows 7 Professional 32-bit to windows 7 Professional 64-bit upgrade?

  I have a laptop HP originally shipped with windows 7 32-bit professional. Now I want to upgrade to windows 7 professional 64 bit. I don't have with me installation disk. So I thought that it is possible (and legal) to resume an installation of windows 7 professional 64 bit disc from a friend and use this product key on the back of my laptop computer to activate windows after the installation of 64-bit? I'm a bit confused.

  NOTE: This sticker on the laptop has windows 7 pro oa, and a product key to 25 digits (xxxxx-xxxxx-xxxxx-xxxxx-xxxxx) written on it.

  In addition, the product ID in the information system in the control panel is OEM.

  Yes, you can use the product key located on the COA sticker with a full retail version or the version upgrade Windows 7 Professional disc.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:
  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  See also:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Cannot use any USB device after the upgrade from XP.

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Windows 7 handles USB devices very well.

  Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

• CC closes whenever the mouse pointer is over the AI program, but works fine if I use a few keys on the keyboard.

  Problems with Ia CC, closes whenever the mouse pointer is over the program, but works fine if I use a few keys on the keyboard.  I already uninstalled and reinstalled the program and still does not work.  Any help would be greatly appreciated.  This is the error I get every time:

  Process: Adobe Illustrator [566]

  Path: / Applications/Adobe Illustrator CC/Adobe Illustrator Illustrator.app/Contents/MacOS/Adobe

  ID: com.adobe.illustrator

  Version: 17.1.0 (17.0.0)

  Code type: X 86-64 (Native)

  Parent process: launchd [164]

  Responsible for: Adobe Illustrator [566]

  User ID: 503

  Date/time: 2014-06-05 12:23:44.975-0500

  OS version: Mac OS X 10.9.3 (13 D 65)

  Report Version: 11

  Anonymous UUID: 6F26D886-D388-DB7F-A836-BB28AFDFD88D

  [long crash deleted information... Please only send a log of crash to a technician, when asked]

  > Mac OS X 10.9.3

  NUMBER of messages concerning problems with this version

  You could go to Illustrator to see what other users say

  10.9.3 Mac workaround https://forums.adobe.com/thread/1489922

  or

  -Activate the user Root Mac https://forums.adobe.com/thread/1156604

  -l' Root user more http://forums.adobe.com/thread/879931

  - and more user root http://forums.adobe.com/thread/940869?tstart=0

• Re: Satellite Pro L - error using the recovery media creator

  Try to copy in memory USB, using Recovery Media Creator, original image from the Pc; just in case of future problems, I get this message: error 040 EAE-02-000000000.
  No idea what this means?.

  Thank you

  Hello

  Have you tried another USB key? The stick is probably defective, so the recovery media can t create successfully.

  Also format the stick before using the recovery media creator.

• The product key for the Windows Media Center 8 does not work!

  I tried 3 or 4 times to use the product key for the Windows Media Center 8, that you sent. But it keeps saying "this key will not work. Check it or use a different key. "I tried too communicate with someone who could help me and now I am very displeased with Windows. I tried several times.

  You are running Windows 8 or Windows 8 Pro? Media Center requires that you run Windows 8 Pro and your installation must be enabled.

  http://techingiteasy.WordPress.com/2012/11/29/how-to-get-your-free-Windows-Media-Center-key-for-Windows-8-Pro/

  Add the feature does not

  To work around this problem, disable the Nalpeiron Licensing Service until you try to install the feature. To do this, follow these steps:1.Swipe from the right edge of the screen, and then click search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on search.

  2. type services.msc, and then press or click on Services in the results of research.

  3. press on or double-click Nalpeiron Licensing Service or NLS.

  4 tap or startup type-click and select disabled.

  5. press or click OK.

  6. restart the computer.

  7 install the feature and then restart the computer.

  8. Repeat step 1 to step 3, and then change the startup type for the licensing of Nalpeiron or NLS on automatic Service.

  9. click OK and restart the computer.

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.