CC closes whenever the mouse pointer is over the AI program, but works fine if I use a few keys on the keyboard.

Similar Questions

• The mouse pointer stuck in mode full screen, but works for bearings and clicking on boxes

  Using win7 x 64, when I get full screen of a game (wow) mode, I lose the use of mouse pointer (its icon is stuck, but I can't gess it runs from bearings and clicking any key).

  Also, if I use another game with win7 x 64 (Flight Simulator) everything works. So, without blaming win7 in itself, I suspect a problem of compatibility between the client of the game and also the video card driver.

  Since everything is updated, my only hope is that you can suggest something, the mouse settings, settings, anything which might help as a workaround. Thank you, ricardo

  Found the workaround from another thread in battle.net, and I reported it here:

  http://EU.battle.NET/wow/en/forum/topic/975220040

• Network error mystery - Windows cannot access \\server\users when you use the netbios name, but works fine when you use the full domain name.

  Hi all:

  Mystery - I have a Win 7 work company that cannot access a particular action.  I get the following error-"you are not allowed to access \\server\users.  Contact your network administrator to request access.  However, these users can access these files successfully on other computers, and also if I use the fqdn or the IP instead of the "netbios name server", it connects successfully.

  Environment:

  -Workstation and server at the same time in the same AD Windows 2008 r2 domain.

  -All users, admin and non admin, cannot access this share when connecting to this computer only.

  -ACCESS to the other actions on the same server, as well as actions on other servers.

  -The biggest mystery to me - if I type the FQDN, \\server.domain.local\users, it works!  What the?

  I tried:

  -Deletion of the domain and add it again, no improvement.

  -Check Event Viewer, nothing jumps (not red or yellow).

  -Enabled auditing for access to objects on the server, it does not show a failure in the security event log.

  -Turn off the firewall of my computer.

  -UN-share and re - share the directory.

  -Give everyone full control (the fact that it works well with de facto authorities a little full domain name, a candidate little likely, but I have an open mind).

  For anyone wishing to offer their 'help' by asking me to make some sort of workaround as re - install windows or turn off netbios or use only of the full domain name here on out or whatever, please Don ' t bother.  I appreciate your help, but I am quite able to reinstall and I'm not interested unique hacks that affect this otherwise network well managed, I'm looking for a solution that will allow me to save time and is a long-term solution.

  In my view, that a key point here maybe I can connect successfully using \\server.domain.local\users, but not \\server\users.  Someone at - it some thoughts?

  In DNS server of youe, go to the area in question and in the use of select search before Wins wins tab and enter the address of your wins server if you have one. If not, install one.

• The mouse pointer passes over the Satellite L10

  I have a toshiba satellite mobile celeron 1.5, 512 MB ram, 40 GB HDD, dvd - rw, wireless, modem, lan.
  I have a problem when you type in certain documents, or simply type a few things. When I type in the world of the example or write an email that my mouse pointer jumps 5 or 3 or 10 lines (or), I normally use a touchpad. This problem is disturbing me since when I bought this laptop (September 2005).
  I downloaded and installed a new BIOS, but it is the same problem - mouse pointer jumps...

  Does anyone have a solution?

  TNX, Danijel

  Hello

  Try to disable the touchpad while typing. You can use the FN + F9 key combination.
  I checked some of the messages in this forum, and generally this should help.

• Keyboard not typing special symbols above the number keys online, but works fine otherwise

  Original title: keyboard problem

  Keyboard not hitting that special symbols above the number keys online, but works fine otherwise. When the shift button is held and you press a number key he type the last letter, which was typed any symbol, you try to type. Keyboard worked fine before, tried another keyboard and got the same results.

  Hi Patrick,

  1. what type of keyboard you use? Is it wireless or wired?

  2. did you of recent changes on the system?

  3. what web browser do you use?

  Method 1:

  If you use Internet Explorer, you can use another web browser and check if the problem occurs.

  Method 2:
  Step 1:

  You can start the computer in safe mode with network and check if the problem persists.
  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works

  I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?

  Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.

• My mouse pointer moves in the opposite direction, I intend when I use the touchpad on my laptop. It works fine when I use my docking station and external mouse. How can I fix it?

  I'm using Windows Vista with a Sony Vaio laptop.  At the office, I have a docking station with keyboard and external mouse.  Everything works fine with this Setup.  But when I unplug the docking station and use the touchpad on the laptop, my mouse pointer moves in the opposite direction, that is my intention.  I move my finger and the pointer down.  I move to the right and the pointer goes left.  How can I fix?

  Go to start /Control Panel, and then double-click the icon '' mouse. '' When this window opens, select the tab "Touch Pad" at the top. There's a box near the bottom called "Touch sensitivity", click on that. Change the settings a little bit lower than what they are currently at.

• Windows 7 64 bit - the mouse pointer doesn't move do not but the mouse is recognized and left/right click

  Problem:

  My mouse pointer is in the middle of the screen and will not go. If I have a left or right click, click on the system recognizes this, but does not respond to the mouse movement. My wacom tablet 's going to move the cursor.

  I've been running the system for 6 months. This problem occurred only 4 days ago. All other features are OK and unchanged.

  Solution attempts:

  I bought another USB mouse and it has the same problem.

  I also tried to reinstall the USB drivers as shown in the post of http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/20826bf8-996e-4622-96f5-09ab7a7d0b1f

  Hardware / software:

  • Generic PC with motherboard Gigabyte
  • Intel Core i7 with 12 GB
  • Windows 7 Professional 64 bit (active)
  • Razer mouse connected via a USB cable
  • Generic USB mouse is brand Legend

  Please let me know if you need more information

  Hi Ardeet,

  Two other things I would say.  First of all, have you been able to test your mouse on another machine to make sure it's working properly?

  Also, have you been to the website of the manufacturer of your computer to update the drivers for your machine and chipset?

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Embedded audio player doesn't work with Firefox in a laptop computer, but works fine on a PC. How can I fix? It started with the new design of Firefox.

  This problem apparently only occurs with the audio player built into http://www.theskepticsguide.org/ . I tried other embedded audio players from other websites and they work fine. In the Firefox installed in my laptop, no matter what I do it does not play the SGU podcast. When I try to click on the download option it says "Video cannot be read because the file is corrupted. However, I can play and download the podcast without any problem with Firefox installed in my PC, which is the exact same version that is in my laptop, so I don't really know what could be the cause.

  I remember that this was not the case before the new design of Firefox. I tried the solutions proposed on this problem before asking this question. I checked that the plugins are up-to-date. I removed all the addons and plugins, and this did not help either. Firefox reset with no luck. Also tried a fresh install of Firefox and it didn't work. I used the laptop without synchronization first, and then synchronize with no difference. Flash is up to date and there is no apparent problems there.

  Maybe it's a codec missing or damaged? I wouldn't trust codecs from sources other than Microsoft for this purpose, since Firefox tries to use Windows to read the file.

  If you decide to give up and around the native player for a plugin, these changes of settings usually work for this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste media and make a pause so that the list is filtered

  (3) [except XP], double-click on media.windows - media - foundation.enabled to change its value from true to false.

  (4) double click on media.directshow.enabled to change its value from true to false.

• the videos do not work in Firefox, but work fine in windows Explorer. Why?

  I tried to check my plugin and all are enabled. I found here where it was suggested to delete and reinstall Firefox, but that did not fix problem either. I tried to change the Viewer for video, but still no luck. Not sure why Quicktime does not work. Note that when browsing videos will not open, but everything else works fine. Videos work very well with windows explore, but not Firefox.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My garmin gps is considered unallocated disk1 on my windows xp machine, but works fine on any other machine. I have re-installed all my drivers but still the same problem

  My Garmin GPS recently stopped to connect to my PC, I hear the beep when it connects and the driver is loaded in Device Manager, but appears as unallocated disk1 in disk management and will not assign a drive letter. It works fine on any other machine. (The same thing happened to my nook also color).
  Here is what I tried:
  1. tried all ports USB - same effect
  2 uninstalled/re-installed all the usb drivers
  3 remove the controller device manager usb and windows allowed to re - install.

  I am currently at a loss as to what else to try

  Kind regards

  Sean

  Hi Sean,.
   
  Check if any firmware or the last update is available for the device from the manufacturer's website.
   
  Updates & downloads
  Communicator Plugin software version 2.9.3
   
  You can also run the troubleshooter from the link given below and check if that helps fix the problem:
  Hardware devices do not work or are not detected in Windows
   
  Additional information is available at:
  Troubleshooting Garmin, DeLorme or other third-party devices with Streets & Trips, MapPoint, or highway

• HP 3510 only prints blank pages of the i - pad, but works fine with xp configured portable computer. Why? Help!

  I have a hp3510 wireless printer which worked well with my i - pad and on my laptop when 1st installed.  now it will only print blank with the i - pad pages, even if it still works fine when using my laptop configured xp.  can someone tell me how to fix the problem of the i - pad, so that I can print wireless using this device?

  Thank you!

  I begin with the tension of the Apple device, make sure that you hold the power button down and drag the bar on the screen on 'Off '. If you have more than 1 iOS device that you use with the current of the printer (like an iPad or iPhone) them down at the same time. Then reactivate them all and try to print to the printer.

  If still a problem, I would then turn off the printer, router and device from Apple.
  1. unplug the router, (most do not have a power button)
  2. turn off printer and Apple device
  3 wait about 20-30 seconds
  4 plug router back in and wait for it to be fully operational and all the light on it again as they were before unplugging.
  5 printer and apple pyromecanismes turn on (check the settings of the iPad to make sure he's still on the same network as the printer and "ask to join other networks" is enabled).
  6 try to print

• Photoshop displays an error and closes whenever the opening/saving a file

  It started just happening really recently and I don't quite know what is the cause, so I was hoping someone here could help me! Open or save files, Photoshop displays this error message and closes of itself:

  Runtime error!

  Program: C:\Program Files (x 86) \Adobe\Photoshop 7.0\Photoshop.exe

  R6025

  -pure virtual function call

  and here is a picture of the error message: http://i.imgur.com/rK6Ji.PNG

  It appears when registering and opening some files, but not others. I can't figure out what causes it to happen to individuals, since they are not all in the same place, or the same type of file.

  I am using Windows 7 64 bit and it's Photoshop 7.0

  Any help would be appreciated, thanks!

  Photoshop 7.0 is kind of old to use on Windows 7, but I'm not saying it's impossible.

  The message you saw is not generated directly from Photoshop as I know.

  • You have installed plug-ins lately?  Or perhaps applications like iTunes or QuickTime that could change things in your path?
  • The free space on any of your drives crosses a border terabyte?  Photoshop 7 has some problems with large capacity disks.

  Another thing you can try, if you have not a direct failure reason, must clear the default Photoshop preferences by pressing Ctrl - Shift - Alt immediately after cold start Photoshop.  If you get the keys down quickly enough, it will set up a prompt asking you to confirm the deletion of your current preferences.  Note you will have to re-do the changes in preferences, you did after doing this.

  If all other fails, current version of Photoshop Elements, which is inexpensive and fully compatible with Windows 7, did better, and more features than Photoshop 7.0.

  -Christmas

• I just buy the creative cloud and photoshop continues to close. Everything I'm doing wrong... Lightroom works fine.

  I can't get my operational photoshop... Help!

  You get an error message like "Photoshop cc 2014 has stopped working"?

• Why don't the bars of links or search on the top half of the page does not work on any site when I use firefox but work fine in Internet Explorer?

  links and bars research on top of half of the pages do not work and is not that I click on them and they don't work, but it won't let me click on it it's like he doesn't see the

  Recently, the Yahoo toolbar and the extension of Babylon have been reported because of this problem. They appear to overlap invisibly on the top of the display of the web page. If you have one or both, uninstall or disable them/it or see if an update is available that solves the problem.

  • See-> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
  • See-> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
  • See-> http://kb.mozillazine.org/Uninstalling_toolbars

  If this does not resolve the problem:

  • See Troubleshooting extensions and themes
  • See-> Troubleshooting plugins
  • See-> basic troubleshooting

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.