Envy 17-2080en

Similar Questions

• HP envy 17 can not boot windows or using recovery DVDs after the replacement of the motherboard

  Hi all, I need your help

  first of all sorry for my English but I'm from Greece. I really don't know a lot about the mobile only very basic computer.

  I have a hp envy 17 3d 2080en with windows 7 Home premium which, after overheating, chips to the motherboard. I ordered and installed a used motherboard from China (part 630793-001 hp number).

  After that I tried to start the laptop, but when he opens he said probably due to the change of the material he cannot start windows normally. After reading a lot on the internet, that I tried using the recovery DVDs I had prepared before the problem, but they will not start just yet. Then, I tried to use the cd system repair but again no luck.

  I looked in the bios as some people say on the internet and realized that the product number and serial number are different from those of my laptop and it's maybe part of the problem, but I don't know. I looked in other posts about similar problems, but did not get a definitive answer and this is why I post for your help.

  Thanks to you all

  Nikos

  IF YOU HAVE AN HP LAPTOP (MINE IS HP ENVY 3D 2080EN) THAT YOU HAVE CHANGED THE MOTHERBOARD WITH ANOTER ONE (MINE WAS FRIED OVERHEATING) AND AFTER REPLACING YOUR LAPTOP DOES NOT START AND YOU CAN'T FIX IT WITH SYSTEM REPAIR DISC OR DOES NOT PERFORM A CLEAN WINDOWS INSTALL OR DON'T LISTEN NOT A RECOVERY CD/DVD RECOVERY THEN EXPERTS HP WHO KNOW NOTHING. LOOK IN YOUR BIOS, AND IF YOU SEE THE PRODUCT NUMBER OR SERIAL NUMBER DIFFERENT THAN THOSE APPEARING ON YOUR COMPUTER (USUALLY IN THE BATTERY COMPARTMENT) THEN GO TO A HP SERVICE ALLOWED AND TELL THEM TO HAVE YOYR TATTOOED BIOS. WITH THE TATOO (COST US $ 40), THEY WILL REPLACE THE NUMBER OF BAD PRODUCT AND/OR THE SERIAL NUMBER WITH YOUR MOBILE PHONE NUMBERS AND YOUR PROBLEM IS SOLVED. MY MOTHERBOARD HAS BEEN FRIED TO OVERHEAT AND I BOUGHT A USED ONE FROM CHINA. AFTER I REPLACED IT THE LAPTOP WOULDN'T START AND WOULD NOT ALLOW ME TO REPAIR DVD HE OR EVEN THE USE OF RECOVERY. I CALLED HP SUPPORT, I EVEN JOINED THE HP FORUM TO ASK FOR HELP AND I GOT ONE EXPERT WAS USUALLY TRY THIS OR TRY THIS. DON'T LISTEN TO THEM. FINALLY, I READ AN ARTICLE FROM THE INTERNET THAT EXPLAINED THAT WHEN YOU CHANG THE MOTHERBOARD / SYSTEM BY ANOTHER THEN THE BIOS REFERS TO THE NEW PRODUCT NUMBER, MOTHERBOARDS AND/OR THE SERIAL NUMBER AND THIS WAY THERE IS INCOMPATIBILITY WHICH DOES NOT ALLOW WINDOWS TO START, YOU CAN NOT REPAIR WITH SYSTEM REPAIR DISC OR IT DOES NOT PERFORM A CLEAN WINDOWS INSTALLATION OR A RECOVERY CD/DVD RECOVERY. ONCE YOU TATOO THE BIOS THATS IT. THE LAPTOP WORKS. I HOPE THAT THIS MESSAGE WILL HELP SOME PEOPLE WAISTING THERE TIME AND SPEND THE MONEY FOR NOTHING

• pictures 1.0.1 quit unexpectedly after printing on HP Envy 5640

  Hello

  I just bought a HP Envy 5640 printer.

  It works very well, but every time I have to print a photo in Photo 1.0.1 NICU OS X 10.10.5, Photos will be leaving after that print is sent to the printer.

  The photo prints fine, but needs pictures to be restarted every time.

  Does anyone have the same problem?

  Any solution?

  Thank you.

  I've not seen posted here - but since you are more than a year behind in updates, bug fixes and new features, you can see a verry old bug that has been fixed many years ago for people who follow to this day - unless he ia a clue right for you m = not updated I suggest you backup and update of OS X Sierra = and Photos 2.0 - this never can solve your problem

  LN

• I have a MacBook Pro, who hates contact my HP Envy 7640 printer all-in-one. Printing can take as long as 10 minutes! If it prints at all! Does anyone have similar problems?

  If I use my iPad to print a photo there is no problem, but if I use the Macbook for the same function, it will be either print it after a long period of time or he'll quit and say "Printing cancelled!" It seems that these problems started after the update. I am running El Capitan 10.11.6. In addition, when you use Hallmark Card Studio for Mac, as soon as I use two back, it will print the first side no problem and then he hangs up and ends by spit the paper without printing the second side! When I got to the printer, everything worked fine, but now...

  Maybe:

  e-with-OS-El-Capitan/td-p/5417344 http://h30434.www3.HP.com/T5/Printer-Software-and-drivers/HP-Envy-7640-compatibl

• How to print multiple copies on a HP Envy 5540

  I'm running OS X 10.7.5. on an iMac. I recently bought a HP Envy 5540, connected wireless printer. It fails to print more than one copy at a time. I see nothing in the software or instructions to change it. Help please!

  It is not clear, put you number of copies in the boxes of Copies and pages?

  Can try this...

  Startup HD, (operation key shift key down to start), run the disk utility in Applications > utilities, then highlight your reader, click on repair permissions.

  All devices which appeared already in your list of printers and faxes list should be added again after resetting the printing system.

  Reset the printing in Mac OS X 10.5.x system +++

  1. To use the reset function of printing under Mac OS System X 10.5.x, follow these steps:
  2. Choose System Preferences from the Apple menu.
  3. On the view menu, choose Printers and faxes .
  4. Control-click on the printer list on the left side of the window, then choose "Reset printing system" from the context menu. If you don't see the list of printers, Ctrl-click on the text "click on + to add a printer or fax" and select "reset printing system...". »
     
     As an alternative, if you have one or more printers from the list, you can click the "-" (deletion of printer).

  http://support.Apple.com/kb/ht1341

  Reset.

• ENVY 15: HP Support Solutions Framework Service - high CPU usage

  ENVY 15, 10 Windows version 1607

  CPU cycles was about 50% this morning and discovered that the HP Support Solutions Framework service was 40 + % permanently.   No problems so far with high utility usage.  Problem started not with the update of the birthday that was filled with 4 days and there are several reboots.

  At a chat session with HP support, but they couldn't help.

  I stopped running - task seems to restart every time I run the HP support assistant and continues with + 40% of CPU usage.

  Any suggestions please?   Y at - it an update utility that I have to download?

  Uninstall HP Support Assistant HP Support Framework in Control Panel > programs and features

  Then, reinstall the latest version of this link

  http://h18021.www1.HP.com/helpandsupport/HP-self-support.html

• HP ENVY m6-ar000 x 360: HP Envy m6-ar000 x 360 Convertible PC Wireless Connection Disconnects frequently

  Hey everybody,

  My PC Convertible HP ENVY m6-ar000 x 360 Wireless disconnects frequently.

  What can I do to fix this?

  Thank you

  Bill

  Hey Bill,.

  Following our normal wireless troubleshooting tool is the best way to solve almost all of the cases, but with this specific model with the AMD processor jump directly to make sure that update BIOS F.06 or most recent would be necessary.

  HP ENVY Ar000 M6 X 360 PC Convertible - WiFi disconnects frequently

  http://support.HP.com/lt-en/document/c05144863

• HP Envy 4500: HP Envy 4500 reset admin password

  I just bought a new HP Envy 4500 and impossible to access many functions through the online web interface IP address. It keeps to a secure https version and then pops up to ask for a name and a password.

  I tried using admin / admin and a lot of variation with no luck.

  Any suggestions or help on this?

  Thank you.

  Rainbow7000 nailed you. I'm in place and operate properly. Thank you for your quick response to my question.

  See you soon,.

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• HP Envy 5640: Missing emails 'subject '.

  When I send an email from a Google account to the printer using the address @hpeprint.com, the body of the text of the email is printed, but the "subject" is not printed.

  Can you please help.

  Hello

  It is exepcted, the ePrint print mail attahed content or supported only the files, not the subject of the e-mail:

  Type a subject in the subject line. An empty e-mail subject line can cause the HP ePrint Server cancel the print job.
  
  E-mail subject lines do not print.

  http://support.HP.com/us-en/product/HP-envy-5600-e-all-in-one-printer-series/6583033/model/6583034/document/c03721293/

  Kind regards

  Shlomi

• 4524 ENVY: Envy 4524 habit of scanning

  Hello

  I recently changed my ISP and they gave me a new router. I set the router upward and printers on wifi and everything works fine, except for scanning.

  The scanner works very well using a generic scanner software but is not a very user-friendly software. So I want to use the HP scanning software.

  When I open the HP Easy Scan it opens fine and the scanner is listed and presets are photo, graphics etc, but when I press 'analysis' it comes back with an error message 'Scanner reported an error' HP ENVY 4520 is currently unavailable. Please check if it is turned on and... »

  Any ideas please?

  Thank you very much

  Hello
  From the Applications folder or its subfolder HP, delete all existing scanning from HP and HP Easy Scan by moving it to the trash, and then empty the trash.
  
  Then install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  Finally, if the problem persists, try restarting your router by unplugging its power for a while, it allows up to 3 minutes to start.

  Once the internet connection returns, restart the Mac and the printer and look for difference ay.

  Kind regards
  Shlomi

• ENVY 27-p100no: is it possible to activate Intel VT on my HP ENVY 27-p100no?

  It is possible to activate Intel VT on my HP ENVY 27-p100no?

  Watching the Intels Web page reported that the Intel Core i7-6700 t has support for Intel VT

  Hello:

  See if there's a parameter enable VT in the BIOS of your PC as shown in the general table below...

  

• HP ENVY tilted 27-k201nd: hdmi in

  Hello

  I have a problem displaying a screen HDMI in on my desk. I have connected my laptop (also HP) to my desktop computer with a screen to HDMI cable. My office does not recognize another screen. My laptop goes white, it recognizes the display on the cable.

  Just installed a new driver for Windows 10: Driver-video card - Nvidia 10.18.13.5330 Rev.A, but did nothing after the reboot. The button: HDMI in the left side does not work either.

  Anyone know what to do?

  Thans in advance!

  Concerning

  Janneke

  Hi @jANSKIBIET,

  I read your great post. The bios is not updated. There is an update of the bios for windows 8.1. I presume that is what got delivered with the PC, and later you upgraded to windows 10.

  Please visit these links: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/w10tp-not-detecting-my-hdmi-cable-to-tv/6868d97c-d008-4184-9437-60df25daa97f

  Link 2: http://windowsreport.com/hdmi-output-problems-windows-10/

  Do not click the ads because it is a 3rd party site.

  If this does not solve the problem and worked with windows 8.1, please back up your files and restore the windows 8.1 operating system.

  Link: http://support.HP.com/us-en/document/c03489643 

  So please update the bios, drivers chipset, video and audio from this link: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-Recline-27-All-in-One-Desktop-PC-series/6876041/model/7233230

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Trust me I did everything I could to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• HP ENVY PHOENIX 800-060: the gtx 1060 is compatible with phoenix want 800-060?

  I want to upgrade my graphics card to my phoenix envy hp 800-060 of the 645 to a 1060 6 GB gtx gtx, but I don't know if it's compatible or fit in my computer...

  Hello! @charline1, thank you for visiting the Forums from the HP Support!

  I understand that you need to know if you can upgrade the graphics card to gtx1060 on your PC.

  Given that the motherboard supports the PCIe x 16 slot gtx1060 graphics card is compatible with your PC, you can upgrade the graphics card.

  I hope that answers your query!

  See you soon!

• HP dv7-7270 envy: module Intel Centrino Advanced-N 6230 WLAN 670691-001

  ENVY of HP dv7 - 7270ca Notebook PC

  Model #: C2H79UA

  I would like to upgrade my laptop to work on the Strip fi wi 5 mhz. Are there any recent changes or updates to this issue?  The last time I checked the module Intel Centrino Advanced-N 6230 WLAN 670691-001 was the only one to try, but I would like to know if it's always an option that will work or is there another method that works?

  I need to move to 5 mhz to enjoy my internet service.

  Hi @Todddo,

  I read your post and I thank you for your response. We always recommend that you buy at HP because it is certified by HP for their computers, tried, documented and tested. If you buy a third-party site, you would do so at your own risk. Our parts to store the site link:http://partsurfer.hp.com

  Our website is: http://store.hp.com

  You could call these numbers, which appear on the Web sites.

  Please check this link out and that could be really useful: http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/HP-7260he-wireless-card-upgrade... 

  Link 2: https://www.amazon.com/Intel-Centrino-Advanced-N-Wireless-Transfer/dp/B005LAIDOY

  I ask you again to contact a local before the upgrade professional technician so that other issues arise with your computer

  You will need a wifi combo card that supports Bluetooth and wifi. Otherwise, your Bluetooth function could disappear from your computer and you must use an external Bluetooth adapter.

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.