Envy 17: No driver

Similar Questions

• HP ENVY m6 - 1188ca Notebook PC: HP ENVY m6 - Hard Drive short DST check FAILED

  Hi there, I get the following start-up error message.

  HP ENVY m6 - 1188ca Notebook PC

  Short hard drive DST Check: FAILURE

  FAILURE ID: GU71BT-6AA892-XD7X1F-60RK03

  Restoration of the system, cooling system, auto repair, no recovery option seems to work. I get to the screen only and cannot get into Windows.

  Is this a problem of material strictly for some? What are my options and next steps? Laptop went from warranty.

  Thanks in advance for any answers.

  

  Last UPDATED October 19, 2016 - I now get this screen when the laptop is turned on.

  

  New laptops are much more fast and pleasant. If your budget by all means, treat yourself. You could fix your old for around $ 100 may - $50 - $60 for a hard drive and about $40 for a recovery media.

• Laptop HP Envy - RECOVERY (d :)) drive is almost full

  I recently bought a HP Envy and am confused as to why my RECOVERY (D car has only 2,37 GB on 23.7 GB available to the left.) I have a backup of McAffee after buying this laptop, but nothing else. Can someone help me?

  Hello:

  Do not back up all files on the recovery drive.

  This partition is strictly there to restore your PC software out of the box state.

  It is quite normal for this partition be almost complete.

  Please see this guide for more information.

  http://support.HP.com/us-en/document/c03737312

• HP Envy 15: Unknown driver

  Hi there, I discovered a little there there is a unknown hit-and-run driver by id USB\VID_138A & PID_0050 & REV_0060 & USB\VID_138A & PID_0050 material on my computer.  I downloaded the driver for validity that is supposed to fix, but it did not set for me. If someone could give me a different driver download that will work it would be great that its been my computer very slow.

  Also, sorry if this gets put in the wrong place, this is the first time using the discussion forums.

  Thank you!

  @AlexN_

  AlexN_ wrote:
  

  Salvation Dragon-fur,

  My product number G0T55AV number is and sp 66915.

  Information file:

  sp66915. CVA

  This isn't your driver, that is, holders of 66915 driver fingerprint readers other than the drive built into your computer.

  System:

  HP ENVY 15 t-k000 CTO Notebook PC (ENERGY STAR)

  I can't find the Windows 8 HP drivers for this system - there are rated drivers for Windows 7, Windows 8.1 and Windows 10.

  Driver sp66110.exe is designed for Windows 7 and Windows 8.1 - it may work for Windows 8 as well.

  Supported devices (in sp66110.cva):

  [Devices]
  
  USB\VID_138A & PID_0050 = "Validity Sensor (WBF) (PID = 0050)" "

  • Create a Restore Point before you make changes to your computer.
  • Download sp66110.exe > save it in your downloads folder
  • Uninstall the driver from your device manager sp66915 - also check the box to delete the driver.
  • Shut down the computer > wait a few seconds > start and open a session
  • Install the downloaded driver 66110
  • Shut down the computer > wait a few seconds > start and open a session

  If you use SimplePass,

  If you have not yet updated the program,

  If you are using series 8 HP SimplePass (some version 8.x),

  then:

  Download and install this latest version:

  sp75196_HP_SimplePass_V8.0.1.53A_W7 - W10-32/64-bit

  Reference

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Envy 17 K205nl: Envy 17 k205nl driver (audio Beats + buttons) page

  Hello

  I bought a brand new Envy 17 K205nl a few days ago and downgraded to windows 7 SP1 x 64 (cloned my old HDD, since I haven't the time to reinstall everything)

  I managed to install all the drivers properly, but I now have 2 things missing:

  -Audio work but no Beats Audio and speakers are very weak without it...

  HDAUDIO\FUNC_01 & VEN_10EC & DEV_0290 & SUBSYS_103C229D & REV_1000 and

  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2808 & SUBSYS_80860101 & REV_1000 (why I have 2 sound cards, audio bt + Nvidia audio?)

  -Function buttons (they do not work properly, but I have no GUI and my bright orange F6 Mute button lights when you press on)

  Thanks in advance for any help!

  p.s. This page: http://support.hp.com/it-it/drivers/selfservice/HP-ENVY-17-Notebook-PC-series/7527536/model/7633630#... shows no driver/software for my laptop, for the two windows 7 or 8.

  Thank you for the update!

  For more information, the HP System Event (sp71156) utility works also under windows 7. My button mute is now illuminated pressed orange, but still no GUI with the exception of the FN + ESC which displays now system information correctly.

  Installs the audio software (sp69618) and now I get the Panel audio beats up & running as well as the key FN + B.

  Extra:

  Setup HP Coolsense gives an error during installation, may be missing some required software but I don't have any additional info.

  Perfect!

• HP dv6 envy: wipe HARD drive

  My laptop could not start. He kept saying 'Please Wait'. I took the HARD drive and made a slave on another computer; took all the user files and then formatted the HARD drive. When I reconnected the HARD drive in its own machine, the computer says that he tries a recovery.

  What are my options? Please help.

  Hi there @Munthu,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to reach out and help! I understand that wipe you the hard drive and now you receive an error message indicating "Seeks a Recovery" on your HP ENVY dv6 Notebook PC.

  Have you tried to insert recovery discs?

  Did you create recovery discs before reformat you the hard drive?

  When reformatting a hard drive, it takes the operating system and everything related to it off the hard drive. That being said, in order to re - install the operating system and all of its essential drivers, you need Recovery CD or a USB stick recovery. If you have not done one for the laptop, you can follow the document 'getting HP Recovery disks or year HP USB Recovery Drive' .

  Here are a few other documents for you who understand the steps and troubleshooting information on the recovery of the system:

  • Performing a HP system recovery
  • Troubleshooting the HP system recovery problems

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of troubleshooting as well as your model number (How can I find my model number or product number?).

  Have a great day!

• M9U51AV Envy 15t: display driver closes and retrieves

  A dozen times a day, the screen freezes briefly and the (approximate) message "Display Driver is dead and has recovered." I can't identify a specific program that causes the problem, but it often happens when you watch videos youtube on Internet Explorer 11.

  I went through all the steps in the wizard of assistance including the restart of the BIos. With the GeForce experience or with the HP Support Assistant, I have updated to the latest display driver. GeForce GTX 950 M, Intel Core i7-6500 CPU @ 2.50 GHz, 16 GB RAM, 1920 x 1080 60 Hz, 361,43 driver version. Microsoft Windows 10 Pro.

  HP ENVY - 15 t best laptop value product number: M9U51AV product number: M9U51AV

  Try to use a browser that you can uncheck use hardware acceleration in its configuration. I use Firefox go to the menu, then uncheck advanced options and in general use hardware acceleration

• Envy 17: Controller driver of storage for disk SATA 4 to

  Hello

  I can't the initialization of a new 4 TB SATA (Seagate Barracuda 3.5 ") drive. I connect to my HP Envy 17 (Windows 7 64-bit) via a USB 3.0 drive hard dock for purposes of backup only. Initialized using GPT, but nevertheless he refuses to show the true volume of the new HARD drive and the system keeps recognizing him as a GB 1677,9 disk.

  I read a little about this issue online and guess that only the volume above 2.2 to is detected but that he couldn't find a solution anywhere and Seagate does not offer one or the other. Have tried to update the driver for this disk (Microsoft driver version 6.1.7600.16385; driver date 21/06/2006) but the system tells me that this driver is up to date.

  Thanks for all your tips and advice!

  KrisD

  Hello

  Check with the manufacturer of the external USB docking station and ensure that it takes care of 4 TB hard drives.

  Otherwise, open the window RUN (Admin) and try the following:

  DiskPart

  list disk

  Select disk x---> x is equal to the target disk

  clean

  output

  Now, unplug the USB and plug it in again.  You should get a prompt to format and initialize the GPT to choose HD and assign a drive letter and label.

• Envy 15: Envy 15 two drives?

  Hi all

  I just ordered a custom envy 15 and I was wondering if this model has been able to accommodate 2 hard drives as my old DV7 17 inches. The computer was shipped with a mechanical drive of 1 TB and I tried to buy a SSD but didn't know if I could use a smaller for system files and keep the mechanical drive for the media. Initially, I wanted to install an mSATA SSD, but it seems that the feature has been removed in newer models. The product in issue is of # L8C63AV_1.

  Thank you!

  Dan

  Dan,
  
  See Page 2 of this manual:
  http://h10032.www1.HP.com/CTG/manual/c04510889
  
  No configuration double hard drive for HP ENVY 15 models.
  
  However if you like you could replace optical drive with disk using a cart like this and use it to store data only, while you start from the primary SSD. You may also like to swap the façade of the old optical disc to good installation issue:
  https://www.jacobsparts.com/items/HDDBAY-02/
  
  Hope you know, work on replacing the hard drive is very hectic: 63, 64 in the Manual Page & he'll cancel guaranteed if something goes wrong eventually for this important disassembly yourself.
  
  Concerning
  
  Visruth

• 4 1002-tx envy: Envy 4 hard drive failure

  Hello world

  I have a HP ENVY 4 1002 - tx Ultrabook (Intel core i5, ssd of 32 GB, Windows 7, out of warranty) which failed the Test of break-in and of another diaognostic HP tests. The result - HDD smart check fails and gives a long fault code. I took a backup and reformatted PC to factory settings, but the problem is still there. I browsed the HP forum and looked at a few responses and guess I have to change my drive hard as the best possible solution (even if it's at work, but the HARD drive may stop working at any time). I would like to know:

  1. what HARD drive (HDD) should I replace with as I have currently Hitachi 500 GB 5400 RPM? Should I go with the same brand, or there are other good options. In addition, this time I would go for 1 TB HARD drive

  2. when I was looking for new HARD drive on the web I found there are different dimensions 1.8 "or 2.5" HDD ", size of the cache, SATA or PATA. That look is this laptop?

  3. Finally, it is easy to change the HARD drive on your own because it is a ultrabook or should I go to a repair shop

  Thank you

  Sahil

  The replacement hard drive is actually not so difficult. Remove the back cover and you will have access to all internal components. Even the motherboard is fairly easy to replace. Here is the Manual:

  Repair manuals

  See p. 37. The real question you'll encounter is cache 32 gig WSSD accelerator and the fact that the storage is in RAID mode. Reloading of an operating system on the new drive is a little awkward and get the "acceleration" of work is also a bit more difficult than the normal software installation. You have a HP recovery disk?

  To answer the other question, you can use any 2.5 inches wide 7 mm thickness SATA HDD to. It is a "superslim" configuration and is readily available, but be careful not to get the type of 9.5 mm thicker. The 32 gig WSSD provides quick access to start and the program, you can get without a SSD drive. I would get a 1 TB drive, like this:

  http://www.Amazon.com/1TB-7200rpm-32MB-7MM-SATA/DP/B00IEY4KVY/ref=sr_1_5?s=PC&ie=UTF8&QID=1461594199&SR=1-5&keywords=1+TB+7mm+RPM+laptop

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Envy 15 Display Driver crashing into some games

  Hello

  Since I bought the HP Envy 15, I had problems with the AMD display driver. First of all, I went to fixed graphics in the bios. When I use the AMD GPU, I have random crashes while playing a few games (only tested Minecraft that runs on Java). I have the latest version 64 bit java, so this isn't the cause of this problem. Accidents appear at random times with no errors except the bubble "AMD display driver crashed and successfully recovered" to appear at the bottom right. When the driver crashes, I have to restart all programs that use the GPU because they do not work properly unless I have restart them. I have already discussed this problem with the HP Instant Support (Chat ID: 39947114) and I was told that the R & D of HP will be notified to soon release an update of the driver. I don't know if the R & D was notified or if the driver is going to get an update. If all goes well, there is a solution to this problem.

  Spoiler (Highlight to read)

  Product number: A9P60UA #ABA

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  : Processor Intel® Core™ i7-2670QM 2.20 GHz, Intel64 family 6 model 7 Stepping 42
  Number of processors: 8
  RAM: Mb 8139
  Graphics card: AMD Radeon 7690 M, 1024 Mb, switchable with Intel® HD Graphics Family.
  Motherboard: Hewlett-Packard, 1688

  BIOS version: F0.9

  : Java Java version "1.7.0_09".

  Product number: A9P60UA #ABAOS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bitProcessor: Intel® Core™ i7-2670QM CPU @ 2.20 GHz, Intel64 family 6 model 42 Stepping County of 7Processor: 8RAM: MbGraphics card 8139: AMD Radeon 7690 M, 1024 Mb, switchable with Intel® HD Graphics Family.Motherboard: Hewlett-Packard, 1688Bios Version: F0.9Java Version: java version "1.7.0_09".

  Thanks in advance.

  After the recommendation from someone, I installed the Drivers UNIFIL of Leshcat and noticed significant performance improvements. They also set the crash issues I had with HP drivers. If anyone has problems with AMD + Intel graphics cards, I recommend a look at the drivers of UNIFIL.

• Monitor for laptop HP ENVY 17-j053ea driver

  Hello, I recently had my screen replaced because of a crack, but the driver that he was replaced at a base in the process, limiting my screen resolution at a fraction of what he is capable of.

  My laptop is a HP ENVY 17 - j053ea Notebook PC that runs windows 64 bits 8.1

  I was wondering if someone can direct me to a place where I can find the driver that came with the laptop.

  Thanks for your time.

  Hello:

  There is no such thing as a monitor driver for all HP laptops I have ever been.

  They all appear as P & P monitors.

  There are different screens with different resolutions.

  I have to imagine that your screen has been replaced by one of a lower resolution.

  For example: this desire 17j has the same resolution of 1600 x 900 your monitor has been replaced by.

  http://support.HP.com/us-en/document/c03930558

  I contact HP technical support, report the problem and that the case is resolved.

• HP ENVY 17-j184na driver download page

  Just bought a 17-J184 Envy and the need to find the HP driver page.  As a developer, I'd rather have a completely clean install.  Driver Genius has done its work very well, but it was missing the drivers for the fingerprint reader.

  While searching for this I'm greeted by a message as follows

  HP could not find the page you want. Please review the information below to get support for your product.

  Nowhere can I find what I need.

  Any ideas?  I thought with a premium product id HP would at least ensure that their support pages are running.

  MattHB

  My apologies for jumping in...

  It is an assumption - page of your driver does not seem to be absent and no device information, it is more difficult to assess the exact needs.

  The following will work for the Eagle Validity Sensor as described below:

  USB\VID_138A & PID_0050 = "validity Sensor (WBF) (PID = 0050) Eagle" "

  Driver:

  validity sensor V4.5.228.0 W8.1 sp63418 - 64

  1. The pilot controls the fingerprint reader.
  2. You will need the HP SimplePass program to interface with the fingerprint reader.

  Probably your system came with, or would be expected to run, the last of the series 8 HP SimplePass program.

  You will find the link to the latest version of the program series 8 HP SimplePass in this document:

  HP SimplePass update instructions

  NOTE: unless you get to the point where you can't get the 8 series to work, ignore all references in the document of 6 HP SimplePass series.  Series 6 isn't bad, it's just an older version - is no longer officially supported, and you can use the latest version and the series if you can do it.  If you decide to switch from one version (series) to another, there is an article to explain how to do this.  Note that you can not the series 6 and 8 of the series on the system at the same time - these are various programs written by teams of different programs.  The names are the same; code is different.

  You can extrapolate your section of the Page 5 installation instructions:

  Procedure - updated / (install HP SimplePass Re)

  • Essentially, you first install the driver, reboot, download and install the second.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• Envy 14 - hard drive failure imminent

  I have an Envy 14-1110NR laptop and receive a message of imminent hard drive failure, whenever I start.  After you run the HP diagnostics, checking the hard drive breaks down so I think I need to replace it.

  The hard drive is a Samsung HM640JJ which is obsolete.  Anyone know what I need to do...?

  Thank you very much...

  Hello Stephen,

  In this case, may be your best option to create an Image of your existing installation system and store it on a HARD drive external - that can then be loaded on the new drive and your machine will be in the exact same condition as it was when the image was created.

  There is a good guide on creating it on the following link - start to the subtopic 'An Option'.

  http://www.eightforums.com/tutorials/8956-system-image-create-Windows-8-a.html

  At the end of the process, be sure to create the 'system repair disc'.

  When the drive has been replaced, you can then boot from the repair disk and reload this Image to the new drive - the procedure is detailed in the guide on the following link.

  http://www.eightforums.com/tutorials/9064-system-image-recovery-restore-image-computer-Windows-8-a.html

  Best regards

  DP - K

• HP envy 17 beats driver for windows 7

  Hello

  I have a HP ENVY 17-j010ep, I got it downgrade to Windows7 Pro 32 bit because most of the software I use to program machines is not available for Windows 8 or windows 8 Pro.

  I managed to make the best of the material works fine except the audio Beats.

  Is there a driver available for Beats audio on windows 7 Pro (32-bit)?

  Thanks in advance!

  Hi Paul!

  What I did during this time, I have installed the driver audio HP 64 bit. Guess what, it works! inclusive Beats...

  This will probably work better on a 64-bit Windows 7 but sinus computer I'm not a DJ, it works well enough for me

  In any case, thanks for the suggestion of Paul!

  See you soon

  Addy