ENVY 750 - 055xt: screw the motherboard for socket mSATA

I have the HP ENVY 750-055xt, which uses the motherboard of Kaili.  There is a plug on the motherboard mSATA and I inserted an EVO of 850 Samsung 1 TB SSD.  Fortunately this solid state drive works and is immediately recognized by Windows 7, no other frills.  However, the motherboard doesn't have the small screws in the tiny mSATA solid drive on the motherboard.

Anyone know the right screw size used to secure the mSATA SSD to the motherboard in Kaili?

Hi Big_Dave,

Thanks for your reply.  I have besides a picture of the Samsung 850 EVO mSATA SSD drive.

It fits in the slot on my motherboard HP MS-7826 (Kaili) mSATA.  Please see below.

The drive performs as well as my boot drive.  As it is not properly attached to the motherboard, the only thing holding is the strength of tensioning of the socket.  Ocassion the tiny jury comes off in the socket and it won't be visible in the path of startup.  Opening upward the chasis LIKE 750 and re - insert the mSATA jury will get the computer running again.  The little screw would prevent the Council of Regularisez making and the frustration of re-Foundation there.

Elsewhere in this forum, I found mention of the screw that I'm looking.  This is the same as that used in the dwelling of minimap express PCI used for the WiFi card.  The expertise here source describes the machine screws Flathead as a M1.6 size.  I ordered a M1.6 x 3 mm of China.  I think it should work.  Some here said they used a M2.0 to head flat screws in the slot mSATA and it seemed to work for them.

My motherboard HP isn't a slot m2.  If so, then I probably would have opted for the Samsung SSD m2, instead of the mSATA SSD drive.

For now, I think I solved the problem with the mother screw missing for the location of nSATA.  Nevertheless, Big_Dave, thanks for responding to me here.

Tags: HP Desktops

Similar Questions

  • Compaq 6005 pro: Manual of the motherboard for a compaq 6005 pro.

    I need a manual for the motherboard for a compaq 6005 pro. No luck in my search.

    Hello

    http://static.highspeedbackbone.NET/PDF/HP%20Compaq%206005%20PRO%20Business%20pc%20Computer%20Maintenance%20&%20Service%20Guide.PDF

    Maintenance & amp; Guide service: HP Compaq 6005 Pro Business PC - removal and replacement procedures format microtour (MT) chassis
    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01869904

    Maintenance & amp; Guide service: HP Compaq 6005 Pro Business PC - removal & replacement of Small Form Factor (SFF) chassis procedures
    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01869966

    Maintenance & amp; Guide service: HP Compaq 6005 Pro Business PC - POST Error Messages
    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01869903

    Concerning

  • HP ENVY 15 t-j100 Quad Edition: replace the motherboard for HP ENVY 15 t-j100 Quad Edition CTO Notebook PC

    HI guys,.

    I have "HP ENVY 15 t-j100 Quad Edition CTO Notebook PC"

    Serial number: (deleted content)

    Product number: E1P04AAR

    Bought a laptp renovated off eBay from someone with thousands of positive feedbacks. It worked great for 6-7 months and then one morning it has not started up. I tried everything, called Hong Kong HP support and even bring to the service center, but was not able to get it fixed because this model was never launched in Hong Kong...

    I tried calling HP we support and they would fix it for $ 300 + and that too, I send this laptop in the USA to someone I know and then HP will come from there. Is not possible.

    So now what I'm trying to do is to look for the replacement of the motherboard, this is what im says does not work. I searched and found these links - I need to know if it is OK for my model?

    http://www.eBay.com/Sch/i.html?_odkw=HP+envy+motherboard&LH_PrefLoc=1&_udlo=49&_mPrRngCbx=1&LH_FS=1&...

    It will be a great help if you guys allow me to know which of them is compatible with the model above.

    Thank you!!

    Hello

    It's a CTO machine therefore normally only available in the United States and perhaps the Canada. Please use a portion for PC cards from the following link:

    http://PartSurfer.HP.com/search.aspx?SearchText=E1P04AAR

    Again, it is a machine CTO, you should check its parts before you buy any replacement.

    Kind regards.

  • HP ENVY 750-055XT: HP download win 10 for win 7

    I bought a refurb unit. He came "upgraded to win 10 64.  But there is no win 7 files to restore.  I have a new win 7 64 pro license. On the CD.   How can I install and lose 10 WIN.  I want to have anything to with win 10 in the computer.

    I have the same computer with win 7 pro 64 installed. I have raid 1 disks.  If I removed the drive in the new computer and installed one of my raid drives which would solve the problem?

    I'll have one connected to the internet and the other will have my critical files and will not have internet capability.

    @HEMI7309

    http://support.HP.com/us-en/mediaorder/HP-envy-750-desktop-PC-series/7779687/model/7805186/softwareitem/M2H64AV/STEP1

    REO

  • Screw the motherboard in HP G62 b29SA - unused holes in the motherboard?

    I've been fixing G62 b29SA laptop from a friend (just replace the fan). There was some time between take apart and put back together (to get the right fan) so I do not remember if all the holes in the motherboard had screws in them. Quite a lot for screws, just spin and spin - there is no wires behind the motherboard or the screws are too small (but I don't think that I have large screws (or at least none that are not from another section (for example, battery or other).)) All the holes in the motherboard has screws?

    seanspotatobiz wrote:

    ....  All the holes in the motherboard has screws?

    Hello

    No, some of them have no screws, BUT all the screws must have holes. Please see the following book to see all the screw locations (see #79 page):

    http://h10032.www1.HP.com/CTG/manual/c02542472.PDF

    Kind regards.

  • replacing the motherboard for hp pavilion

    I have a HP Pavilion model a4316f. The system no longer recognizes any of the readers. This system

    has a motherboard Violet 6 and from what I read in the forums, this is a common problem. If I replace

    the motherboard with another motherboard of violet 6 will be provided with recovery disks the

    system still works? If not, what are my options, do not want to buy the software after buying the motherboard

    for a 4 year old computer.

    Thank you

    You must send the motherboard to HP or an authorized service center for tattooing the BIOS/CMOS with your information system, if you want to use your HP recovery disks in the future.

    Alternatively, if you can still read the product key 25 character Windows on the Microsoft COA (see example below) attached to the computer, you can install Windows 7 using this key.

    Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 using the 25-digit key from the COA Microsoft on your computer. Understand that this method will not contain any what customizations HP or HP software value-added.

    Windows 7 SP1 can be found HERE and HERE.

    Direct link to Windows 7 USB/DVD Download tool.

    Please consult your computer HP Pavilion a4316f Desktop PC drivers page for Windows 7 drivers. If you have any questions, locate the appropriate drivers, please message the Windows Device Manager (text only) "Hardware ID" of all remaining missing or unknown devices, as shown in the example below.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Need information about the motherboard for Satellite C850D-125

    Hello

    The Board of Directors of Toshiba Satellite C850D-107 wotk in Toshiba Satellite C850D-125?

    I need advice for my Toshiba Satellite C850D-125, and I can't find C850D-125...

    But I found a C850D-107.

    Can you help me?

    concerning

    According to the specifications, the two machines have different numbers. Satellite C850D-125 except the number PSCC8E and Satellite C850D-107 PSC9SE. They have different CPU and GPU.

    In General, I think that you could use, but I don't know if all ports placed left and right are identical. Check if you can find a motherboard for the models with the same part number.

  • HP pavilion notebook 15 - n03: what is the model number of the motherboard for hp pavilion laptop i3 15-n037cl

    While I put a fan 90 b error and it froze on some video games, it was still under warranty but I wanted not to part with them for weeks and tried to clean it myself, I tore from the power button ribbon clip out of the motherboard and it will not power, my first question is that this will be not covered will be?

    My next question is how would you recommend I rectify this error, what is the motherboard model number, so I can get a replacement? and where can I find some information on the permutation of the cpu and fixing what needs to be fixed, thank you.

    Yes. It's a 3217U i3 with Intel integrated graphics

    So this is the motherboard:

    Intel Core i3-3217U DC 1.8 GHz (3 MB L3 Cache, 1600 MHz DDR3, 17 W) for use with Standard Windows. 737982 501

    Also not in stock at Partsurfer.

  • ENVY 750-055xt CTO: hard disk capacity

    The motherboard comes with 4 ports for SATA drives.  I ordered 2-drive Raid 1.  Can I use other 2 ports for two disks?  I have a 500 watt PS

    Hi @HEMI7309!

    Yes, you can use both your motherboard SATA ports and connect two hard drives. Regarding the cables, you can check for some extra power and data cables connect the drives with.

    Hope this helps, and feel free to ask any questions you may have.

    See you soon!

  • where to buy the motherboard for 6633w

    need to purchase replacement for hp 6633w motherboard

    The system is in the next part of the motherboard that can be purchased at several retailers such as Amazon and Ebay:

    620887 001Motherboard - AMD 785 G(RS880/SB710), Alvorix

  • HP ENVY h8 - 1520t: set the bios for the site with riders

    I need jumper to clear the BIOS settings in the CMOS. Does not start to any menu or menu setup after getting out of battery and replacement.

    Thank you

    Chet wood

    Product number:

    C9D47AV #ABA

    • HP ENVY h8 - 1520t CTO desktop PC
    • Win 8 64-bit
    • Microprocessor Intel core i7-3770 CPU @ 34.0 Ghz
    • 8 GB MEM
    • Mem slot 1 8 GB 1600 Mhz Micron
    • Chart AMD Radeon HD-7570
    • Current RES 1920 x 1080
    • refresh rate 60
    • 2AD5 Board of Directors system 1.03

    BIOS 8.14

    2AD5 Board of Directors system 1.03

    The motherboard is the same as indicated, BUT the jumper CMOS block illustrated on the Web page must be another block I watched card mother pictures of this model from EBay and they show the jumper in the position that you indicated.  There are two blocks.  There are two blocks of blue jumpers with the configuration pins as shown in the picture I posted.  I think that what the picture posted is saying leave the jumper on the right side block is and only move the jumper on the left side of the position shown, then again.  Just to clarify, there is a block under this block, we want, and who says "ROM_RECOVERY" and this block has a single rider together 1-2.  Jumper block we are debating is actually marked "CMOS-PW.

    Hope that helps clear things upward.

  • Bought Aspire ATC-780-AMZi5; ask for details of the motherboard for adding hardware

    Purchased an ATC-790-AMZi5 desktop version 2 TB of Amazon.

    How can I find information about the motherboard?

    I want to add RAM and an SSD SATA3 of m2.

    How can I determine the speed of the motherboard?

    Can I add 2400 Mhz RAM or should it be only 2133?

    A link to the current BIOS for this machine can be supplied?

    Someone else in this forum it bought on Amazon? You have found the information of the motherboard? from where?

    Hello!

    This is the specification of the http://www.acer.com/ac/en/US/content/model/DT.B59AA.002 unit

    If you go to http://www.acer.com/ac/en/US/content/drivers using the serial number or SNID of unity, you can find the manual for the unit and get the information you need for this device.

    I hope this helps you!

    Don't forget if to Bravo!

  • Swap the motherboard for the section previously acer m5910 / how to Exchange win7 for this mobo HELP NEEDED

    IM about to exchange the new motherboard with chipset intel my m5910 system. I have not install win 7 dvd with my purchase in 2011, it seems to be built in. I have win 7 Home premium product... always on my case and acer s/n + snid number too.

    Only the DVD that I found are 3 dvd - r and it is written: empty recovery DVDs, I checked and all 3 are filled with data.

    When I swap card mother how can I use THIS win7 operating system in my new motherboard?

    If your Windows supplied with your Acer computer, then your Windows is an OEM version and not the retail version. My suggestion will probably not work, but you can always try. Worst case, it's that you have purchase a retail version of Windows from any store.

    If you are patient, wait for Windows 10 is released. You might be able to work around the problem of it being related to the motherboard, or at least 10 Windows can be cheaper to buy retail (I am purely speculating).

    If you don't have the extra money right now to buy a new copy of Windows, then please don't follow my suggestion. My suggestion in the previous post probably will not work because you OEM of windows, but it's just something I want to try it personally.

  • I want to disable the motherboard for a Pavilion p6232p video driver

    I need to turn off or disable the driver for the card on mother built in video card in a p6232p of Pavalion.

    The manufacturers motherboard is an Asus IPIBL-LB

    I bought a GE Force 620 Nivida GT video card. I installed it. Then, I ordered a 400 watt power supply to replace the 300 watts delivered with the p6232p. I put everything back together and then I read the installation

    Once again the instructions and I saw that everything built the onboard video drivers supplied with the p6232p had to be disabled. I was frustrated and hung on my monitor for the new card (Nividia GT 620).

    I booted up and everything worked fine. I then installed the CD supplied with the card and it worked as well. BUT! the installation instructions were to remove the old video card or disable any motherboard built

    among drivers. So, that's what worry me because when I started first with the new pc card took control without any installation disc. There is no connection to the old pc blue monitor connector. Maybe I could check the list of devices to see if the drivers are always active. Thank you for your response, cajanpepper

  • is the GPU of NVIDIA chip on the motherboard for HP Pavilion dv9420us

    My HP Pavilion DV9420us just went 'all white' and now won't show anything.  It also keeps cycling on and outside.

    I just read that a class action has been filed last year (2010) against NVIDIA on GPU chipset.  It's time to add my complaint to the trial.

    So, as my laptop is 'dead' anyway, I want to replace the GPU NVIDA myself.  I know that it is on a 'table', so I have to replace the Board on what it is.

    My questions are: is this on the motherboard? or on a separate Panel? When I opened the laptop, the chip is identified as "NVIDIA" blah, blah, blah?

    I have built office machines and have replaced a video screen on another laptop, so I am familiar with the "inner".

    Just like get some info before I try this.

    I have a device to get "dead" files on HARD drive, but when I looked at the pins of the connector on the HARD drive (2), they are 90 ° to the HD and separated, very different from a 'normal' laptop HD where the stems come out all right.

    I found a place on the WEB that has a motherboard for my laptop, about $165.

    Any info will be appreciated.

    Thank you for your time.

    jmzamo

    Hello:

    Here is the link to the service manual for your laptop.  You will need to replace the mother board to replace the video card. See Chapter 5 for removal and replacement procedures.

    http://h10032.www1.HP.com/CTG/manual/c01311536.PDF

    I'm sure it's a standard SATA HDD and you just have to remove the adapter in.

    In any case, Chapter 5 provides procedures for withdrawal and replacement for that too.

    Paul

Maybe you are looking for

  • I cannot set the outgoing port Thunderbird 38.0.1.

    Thunderbird 38.0.1 does not allow me to set the outgoing port, parameters of account or in the Assistant accounts again. To be able to do was my only reason for considering change of Qualcomm Eudora. This flexibility is apparently available in earlie

  • Wireless keyboard not working not properly. (Microsoft Wireless MultiMedia Keyboard) (SOLVED, CHECK MY ANSWER)

    Hello, I replaced my monitor, but my keyboard did not work properly and when I spam a letter as "aaaaaaaaaaaa" very long, it stops and I have to press it again. Can someone help me? I have the same situation in a game when I'm pressing certain keys t

  • Menu item

    HY guys, I have created a few buttons on a screen, and I want that they also to appear in the menu. Here's a buton ButtonField myButton = new ButtonField ("Push me", ButtonField.CONSUME_CLICK);myButton.setChangeListener (new FieldChangeListener() {}

  • VLAN MGMT

    I have 2 L2 switches, one in the DMZ and in LAN. I would like to put a single vlan dedicated to these switches tqo. What is the best option? (a) is it by creating the same vlan on both switches and then connect a cable between the LAN and DMZ switch.

  • Ox80240031 error message came when I tried to download 8.1

    I can't connect to Windows Store (I have Windows 8) therefore impossible to download 8.1 Windows or any application store (I've tried several apps and same error message came).   Ox80240031 error message came when I tried to download 8.1 Computer rec