ENVY - automatic update failures

For the last week or plus-automatique updates to apply when stopping. Every morning, they are cancelled. I don't know what are updates, or the place to go to get them.

Hi MEJ16,

I did some research on this error code and it seems that some updates Windows will face unless you disable secure startup. This document from HP on the Secure Boot will show you how to disable. Disable startup secure then repeat the update and let me know how it goes.

Thank you

Tags: Notebooks

Similar Questions

  • Toshiba C855D laptop Windows 8 boot after automatic update failure

    My daughter bought a Toshiba C855D laptop there are a little over 2 weeks.  I helped create the DVD backup.  Unfortunately she forgot to take them with her when she returned to her job in another State.  Update from the laptop last night and restart it displays: "failed to start: a proper digital signature not found.» Select one of the files on the boot device has been rejected by the Secure Boot feature. "Her appeal until the recovery discs arrive by mail?

    I also work on a laptop with windows 8.  After a long conversation, that's what happened.  They bought for Christmas and installed Quicken and have been broadcast since.  Last week an update had completed and was stopped.  The owner stop and a few days later he turned on and with a few minutes of being on a Car Parts web site (NAPA), the locked system restarted with the same problem as icdesigner above.  I read a lot of tech ideas and that your giving, that's all they say.  Although it does not work for this system.  With security on there is a black screan with and error failed to start that stays on for about a minute then shut down the system.  With the security it starts with a blue screen that stays on with RCOVERY at the top.  The digital signature for this file could not be verified. 0xc0000428 error code.  Then he goes on to say to use the disc that came with the system to fix it. Well no disk came with it, but I was able to join the program of recovery once to restore the system to the factory.  Still getting error and can't now to the recovery program.  So is it possible that one of the updates is corrupt and rewrite the boot sector on hard drive?  I say this because when you do a complete reinstall as I did wipes everything except the boot sector.  You have all the other fixes that will work, remember that I can't go beyond these screans.  Mobile society has already said the owner that it will cost more than $300 to send it in, and it's almost what they paid.

  • "Database corrupt installation" - discovered after failures repeat the installation of automatic updates of Windows

    We're running out of WinXP SP3.  Apparently, we are unable to install/uninstall anything correctly.  I think it may have something to do with "a basic installation damaged."  I got this error when trying to manually install KB972581 (a security update for 2007 Microsoft Office System).  This could have been caused by running the Windows Installer cleanup utility, I didn't have problems with Office 2007.  We were informed at all by continuing to upgrade with another program issues.

    We daily use Outlook 2007.  Multiple users, so we can't delete it.

    Same thing with KB970895 (update of security for SQL Server 2005 Service Pack 2) - another failure with the description of the error "Unable to install Windows Installer MSP file".

    Basically, the automatic updates of Windows always fail.  Comprehensive research of these forums, I found and ran the Microsoft FixIt! # 50202, without result.

    How can I fix anything that makes things installation fails?

    I had a similar problem - resolved two things actually. First make sure yu have the latest windows installer engine. Then download the package fails and run interactive mode. This will give you the 'real' error which causes the failure so that you can correct it.

    In my case it was a dependency on another file system that was resolved by running sfc/scannow - it's maybe not the question you... once again, run the full installation package and also to enablehttp://support.microsoft.com/kb/223300 logging to track down issues...

  • Failure of the automatic update

    Automatic update KB978542 cannot install error 0 x 80070005. Provide a solution to the problem please!

    Windows XP Professional Service pACK 3 x 86 SYSTEM 32.

    Thank you

    VIC Luci

    Ask in the appropriate forum.  It is to give your comments upbout the website of answers, not not to ask technical questions. Brian Tillman [MVP-Outlook]

  • failure to screen after the installation of automatic update

    A recent update automatic is originally my screen black out about every 30 seconds. If I go back and system restore to an earlier date, it solves the problem. I had to disable automatic updates. has anyone else found this problem?

    Hi ChrissyStowell,

    ·         You receive an error message/code?

    I suggest you to perform a System Restore to the point when the computer was working fine. Install an update at the same time and the update check is at the origin of the conflict. Follow these steps to update windows.

    Step 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Step 2: You can manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

  • Photosmart 6520e: error code 8004200b on Windows 10 update failure

    I use a laptop Pavilion DV7 64 bit which my Photosmart 6520e is working. I was on Windows 7 but that you have upgraded to Windows 10 in the last 2 months.

    Updates Windows told me that attempts to install an update to printer ALALA keep failure. The message I get is "HP - Imaging - printing - HP Photosmart 6520 Series - Null error 08024200 × b" cannot install the update.

    So far, I have a solution to this Microsoft after trying various suggestions such as Windows update troubleshooting startup and clean.

    Someone at - it additional ideas, or is it because there is no suitable for my 5 year old laptop Windows 10 graphic driver?

    Gordon

    By disabling automatic updates, you can test the HP the rewritten Microsoft drivers b4.

  • This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update has not as well.

    This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update 4/16 showed failure: update for Microsoft Office PowerPoint 2007 (KB 24664594)

    Hi William,.

    First try the following article: http://support.microsoft.com/kb/971058.

    If this does not work, try this link: http://support.microsoft.com/kb/923100.

    While I'm not quite certain that the first will succeed, the second is a common and often recommended solution that has helped a lot with this error code.

    I hope this helps.

    Good luck!

  • Receive error 646 when attempt to install automatic updates

    several updates fail to install automatically and are listed as having failed in the update error code 646 story but when I manually install they go on the list of installed updates and if I try to reinstall I get the message that they are already on the system, but still they show as failed in the action center of windows and on the history of updates list. Who is this. they are there or not? I ran a windows Cleanup. tried to remove and reinstall, reboot. I always get the message failed. It's 979441 and 982331. I had problems with the automatic updates before but were able to install and get the deleted manually failure message. I was told this morning when I tried to manually reinstall I did not require 2331 441 and it was already there.

    Hello

    Here's what I recommend you do:

    1 disable UAC. Down comes the restrictions - turn it off completely.
    2 restart your computer for the change to take effect.
    3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
    4. install. It should work fine.
    5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
    6. follow steps 3-4.
    7. If it still does not work, follow step # 3 again. After you download it, try to disconnect your computer from the internet (unplug the internet cable or turn off the modem). Then, try to install the downloaded (KB982331). It should work this time.

    Let me know your results.

    WARNING: This is only a WORKAROUND and not a RESOLUTION. We worked tirelessly to find the solution. Thank you.

  • Several automatic updates do not continually settle...

    Several updates will not install when I start the automatic update, its been like this for about a year and I still have not found what to do. These are updates that keep a failure:

    Update for Outlook 2003 (KB943649)

    Update of security for Microsoft Office 2003 (KB921598)

    Office 2003 Service Pack 3 (SP3)

    Update of security for Microsoft Office PowerPoint 2003 (KB948988)

    Update for Office 2003 (KB945185) security

    Update for Microsoft Office 2003 (KB978551)

    Update of security for Microsoft Works Suite 2005 (KB943973)

    Update of security for Microsoft Office Outlook 2003 (KB945432)

    Update of security for Microsoft Office 2003 (KB953404)

    Update for the junk e-mail in Outlook 2003 (KB977840) filter

    Update of security for Microsoft Office Word 2003 (KB954464)

    Update for Office 2003 (KB954478) security

    Update of security for Microsoft Office Excel 2003 (KB955466)

    Update for Office 2003 (KB907417)

    Update for Microsoft Office Outlook 2003 (KB953432)

    Ive tried to download a couple of Download Center and it is said that they can not be applied. I don't even use Office and things like that, because, well, I can't, I lost the key when I bought my computer (software that came with it). These updates are very unpleasant. Help, please!
    Thanks in advance! :)

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Why attached used pps files opened after the latest Automatic update of the ie8?

    Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
    attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
    When I try to open files pps attached, this is what I get.
    a box with a red x will appear and this is the message;
    "this file has no program associated with it for performing this action.
    Create an association in the FOLDER OPTIONS Control Panel."
     
    Before the automatic update, this function worked fine.
    Also, the association for pps files is still there in the Folder Options Control Panel.
    and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
    .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
    .. just one more why people hate automatic updates or updates of any kind.
    like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
    So what's the cure for this annoying problem?
    E-mail address is removed from the privacy *.

    I have XP SP2 and PPS PPViewer 7 NOT VISTA
     
    That's what my watch key

    HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
     
    not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
     
    I also tried renaming it as shown below, and it will not let me NOW WHAT?
     
    where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
     
    Hi wwollmuth,

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    Hi wwollmuth,

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When you do the automatic updates of Windows Vista I get the "Security Update for Windows Media Format Runtime 11 for Windows Vista (KB968816)" = Failed__

    When you do the automatic updates of Windows Vista, I get the code below.

    'A security update for Windows Media Format Runtime 11 for Windows Vista (KB968816)' = failure

    • What should I do to fix this?
    • And what does this update actually?

    Thanks for any help provided.

    scrubie,
    If you go to programs and features, and then on the left side you should see a link for "Daily display installed."  Which would then show the list of updates with the State which will show you if it failed or not.

    Hope that helps. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Na herinstallatie van windows xp sp 3 niet meer added wordt. Nochtans zijn automatic updates ingeschakeld

    Na een failure heb ik windows xp opnieuw geinstalleerd dmv F10 in het-start menu.

    Mijn system works nu goed, alleen wordt het sp 3 niet devising added colazione automatic updates zijn ingeschakeld.  Voorheen had ik wel sp 3, nu heb ik sp2

    SP3 installatie - these...

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-0x80244019-trying-to-run-Windows-Update-on-a/6cae5a30-9945-43d6-80a7-02064bbbef5b

    .. .Gebruik google translate als I het niet begrijpt Engels.

    Tricky

  • Computer starts only in Mode safe after automatic updates.

    Over the weekend, that some automatic updates ran on my XP computer and now my computer won't start mode without failure.  I've done several restorations, and it still does not start correctly.  Any suggestions?  I use AVG Free antivirus.

    Don't know if that makes a difference, but I looked back and in 2003, we bought the computer...

    It makes a big difference ! At the #1 stage, you want to download a different removal tool using this link instead-online ftp://ftp.symantec.com/misc/consumer/Rnav2003.exe

    All the other steps remain the same.

    You may be able to connect after restarting in Safe Mode with networking by my previous answer - but be VERY CAREFUL and connect just long enough to do what you need to do.

    If my fix works, you should be able to connect to normal (Windows) to the time where you get to step 4. If not, well..., we'll cross that bridge if and when we come to it.

  • Automatic updates failed to install six new updates.

    I had a problem with the MS updates and worked with a Service professional customer online supports Microsoft MS.  The suggestions he gave helped with updates that don't settle and apparently cleaned as well other issues.  I am very grateful for the help. However, two days later the automatic updates tried to install the new updates and they did not like before with the same error code (error Code: 0 x 80070017).  A description of the six failures arises from the history of MS update:

    Update for Microsoft Office 2003
    (KB2539581)
    Wednesday,
    On 10 August,
    2011
    Microsoft
    Update
    Office 2003 Security Update for Microsoft Office
    2003 (KB2509503)
    Wednesday,
    On 10 August,
    2011
    Security for Microsoft Office was updated
    2003 (KB2289163)
    Wednesday,
    On 10 August,
    2011
    Microsoft
    Update
    Office 2003 Security Update for Microsoft Office
    2003 (KB2288613)
    Wednesday,
    On 10 August,
    2011
    Microsoft
    Update
    Office 2003 Security Update for Microsoft Office
    2003 (KB972580)
    Wednesday,
    On 10 August,
    2011
    Microsoft
    Update
    Office 2003 Security Update for Microsoft Office
    2003 (KB951535)
    Wednesday,
    On 10 August,
    2011
    Microsoft
    Update

    OPTION A: See if running the tool to Detect & repair fixes the problem. See resolution method 2 here-online http://support.microsoft.com/kb/821593

    If still no joy, see if uninstalling & then reinstalling Office 2003 solves the problem.

    OPTION B (recommended):

    COMMENT: If a free trial Norton came preinstalled on the computer when you bought it, the free trialware was reinstalled (but invalid) when you have done the clean install of Windows XP last year. If you have NOT done a uninstall this free-trial AND THEN (b) run the Norton Removal Tool (c) BEFORE you installed AVG, but also of the Windows updates, you are looking to do a clean install.

    Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

    If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

    Wish I had better news for you. Good luck!

  • Every moment & then my Vista Original fails to start after an automatic update & shutdown.

    I had upgraded from XP to Vista Home Premium.  All updates are on. I also use Microsoft essential security such as anti-virus protection. Every moment & then my Vista Original fails to start after an automatic update & shutdown. I had to reinstall all my programs. Happen 3 - 4 times in less than a year. The disturbances windows also does not work

    Any Advisor. Should I upgrade to XP?

    Hello

    Make sure that you do not install hardware 3rd party via windows update drivers

    they are normally not up to date and can cause computer problems

    change the way you receive updates and check what you install ad if you don't not right-clicking on UAC prompt you to hide it:

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

    and if you're still stuck in a loop non-Boot read these methods on how to try to fix it:

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    ;

Maybe you are looking for