ENVY TouchSmart j040us 15 HP

I need drivers to downgrade to win 8.1 for win 7 64 bit. Thank you

WARNING *.

HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto', if this option is available.

In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

From the top...

Download f6flpy-x 64.zip, extract the files/folders and place it on a USB Flash drive.

(1) turn on the computer and immediately start typing the key "ESC".

(2) when the MENU is displayed, press "F10".

3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

5) press "F10" and click "YES" to "Exit Saving Changes".

(6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

(7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

(8) to turn on the computer and immediately start typing the key "ESC".

(9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

(10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

(12) you may need to provide Intel SATA/RAID drivers at the moment...  Insert the USB Flash drive with drivers Intel SATA\RAID previously extracted.

(13) follow all instructions and meet the need. Enter the Windows 7 key when asked.

64-bit drivers for Windows 7 from your computer TouchSmart from HP ENVY 15 - j040us Notebook PC drivers page should work for you. Please post (text only) Windows Device Manager "Hardware ID" a rest of missing and/or unknown devices, as shown in the example below and we can direct you to the correct drivers.

If you have any other questions, feel free to ask.

Please click the 'Thumbs Up' white LAURELS to show your appreciation

Tags: Notebooks

Similar Questions

  • Envy Touchsmart 15-j040us: trying to upgrade my Touchsmart 15 keyboard

    I would put the keyboard on my laptop to a backlit keyboard. I have an envy Touchsmart 15-j040us; a HP technician told me that the motherboard is C8N73AV, based on the serial number of my laptop. I currently have keyboard 720242-001 (not backlit) and it seems that 720244-001 is the correct keyboard for the backlight.

    My question is my motherboard has the correct port to connect the backlight ribbon cable or not. I want to assure you that my motherboard will support the upgrade before the tear in my laptop just to find that it will not support the upgrade...

    Thanks for any help!

    Your laptop has the pointer stick keyboard? I searched the manual and there is no different motherboard only so that the keyboard model so, the assumption is that all motherboards have the plugin for the backlight cable. The problem is that the process to remove and fix the backlight cable is not documented in the manual. Removal and replacement of the keyboard also appears to require complete disassembly, including removal of the motherboard.

    Manual

    See p. 95. Sorry I can't be more definitive but I would say as my best guess that all motherboards have the connection for the backlight cable.

  • TouchSmart HP ENVY 15-j040us Notebook PC-problem with internet gambling after upgrade to 8.1 windows

    I have a HP Envy 15-j040us Notebook PC Touchsmart is currently using 8.1 64-bit windows.  I play 2 Farmville on Facebook.  I started having problems after installing Windows 8.1.  My mouse hesitates and reluctant game and I can barely move on the screen.  I am not real computer savy but can follow directions if you can just tell me what I need to do to correct this.  Everything on the screen is just very slow and the mouse does not seem to want to go where I'm pointing to it.

    Hello @aodom ,

    Welcome to the HP Forums!

    I see that you have any questions, play Farmville 2 since the update to Windows 8.1.

    First, update the drivers for your graphics (GPU) with the following download: driver Intel graphics high definition (HD).

    Once you have done this, update Adobe Flash player plugin with the following download: Adobe - Flash Player

    Once you have updated the GPU and the Flash Player, disable hardware acceleration for Flash on your laptop:

    1. Right click any where on the Farmville game once it has loaded.
    2. Select settings.
    3. Make sure that you are on the tab display/graph (see image below).
    4. Clear the check box to enable hardware acceleration if it is available. If you are prompted to activate the control of your webcam or microphone that these steps do not apply because the game is not trying to use the acceleration.

    Let me know if it helps.

  • Envy of HP Touchsmart M6 - k022dx: network (Ethernet/WiFi) for HP Envy Touchsmart M6-k002dx drivers?

    Hi all

    Had to replace a dead hard drive and installed a new one with Windows 7 on my niece envy Touchsmart M6-k022dx. Can anyone recommend Windows 7 drivers for this model of work. I thought that I did need to get the ethernet/wifi working so that I can update the Windows 10 laptop and then install the drivers of page drivers. Any recommendation is greatly appreciated.

    Thank you

    You are the very welcome.

    See if this driver W7 IDT Beats Audio works on your model.  Install and reboot the PC.

    This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

    http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64958.exe

  • ENVY TouchSmart m7-j120dx: need to upgrade tips - ENVY TouchSmart m7-j120dx

    I have the mobile suite:

    ENVY of HP TouchSmart m7-j120dx Notebook PC

    http://support.HP.com/us-en/drivers/selfservice/HP-envy-TouchSmart-M7-J100-notebook-PC-series/540117...

    I want to spend as a result of:
    500 GB SSD
    16 GB OF RAM

    From the following link, I discovered that the RAM should be SO-DIMM DDR3L-1600 with 1.35 volts
    I also know, I need this cable and caddy:
    http://www.Amazon.com/HDD-cable-Caddy-envy-J000/DP/B00GIGJYBG

    Now my questions,

    1. I currently have two 4 GB of RAM at 800 MHZ. If I buy a 8 GB 1600 mhz and use with one of the 4 GB of RAM I have, it's going to work?

    2. What is the maximum memory supported by my laptop? The first link, it seems to me 16 GB max.

    3. I need too amazon links for compatible RAM for my laptop for the 8 GB and 16 GB.

    4 I need also links amazon to compatible SSD drives. I'm looking for 500 GB.

    Thank you
    Jay

    Hello

    The following manual will answer most of your questions:

    http://h10032.www1.HP.com/CTG/manual/c04091762.PDF

    1. not all the RAM sticks are the same. My suggestion to use Crucial to get the right result:

    http://www.crucial.com/USA/en/memory-info

    2 Max is 16 GB as mentioned on page 2 of the manual,

    3. as #1 above.

    4. all standard SSD can do, you can see as Crucial to the right, and you can buy on Amazon after obtaining the right of Crucial.

    Finally, you need ONLY the caddy if your goal is to install 500GB SSD on the second span.

    Kind regards.

  • 15 clicks Ghost Envy TouchSmart

    Hello

    I need to make this folder somewhere - thing

    My HP Envy TouchSmart E3S19UAR 15 had a problem of ghost-click with the touch screen from the first day. I did all this as recommended on these forums (and), including all updates, reinstall crushed, blah blah blah. Even sure my screen is clean and all other physical possibilities are excluded.

    The problem, like many others on these forums, comes after Windows puts the system to sleep. This happened under Windows 8.0 and continues under Windows 8.1. It goes right now.

    For some time, I thought the problem was solved - but then this weekend, my battery died suddenly. You see, in order to solve the problem, I had changed my setting of the system of 'Always On' power and changed other settings that Windows has gone to sleep. To realize that, I changed power settings back to "sleep mode"... and of course, in the awakening of his first sleep in a few months, ghost-clicks of the system started up again.

    This is why I write - I am a few hours away from my expiring warranty (it is daylight saving time of 22:00, 20:00 for the time zone apparently used here). People of guaranteed phone HP just me transferred to the support paid and was told that the warranty service would not help. The website of HP warranty, confirms nevertheless that I am still under warranty. (Yes, I have screenshots and documents printed with the stamps).

    So I intend to continue tonight if I can and certainly tomorrow (Monday) when there is hope that American support. Since I don't know how else to do this thing on the record, I post here.

    Please help, someone from hp. I'll call.

    Thank you.

    Tim C

    series 6xxxxxxxxG

    [Note: edited by OP to delete serial No. after the issue is resolved.]

    I asked the escalation of your problem. Cannot lead to any action - but at least maybe it will help with your documentation.

  • Upgrade of an ENVY TouchSmart 17-j005ea

    I plan to replace my Dell with what would be my first HP laptop (a 17-j005ea ENVY TouchSmart), but I'm not sure if I would be able to upgrade.

    I'd be looking to replace one of the hard drives with a SDD and replace the DVD drive with Blu - ray burner, but I heard that the upgrade can be a problem with some HP laptops.

    These upgrades would be not possible for a person with basic experience of the PC?  (I create my own desktops and have upgraded discs and memory on Dell laptops without difficulty.)

    Depends on how you define the problem. Here's an announced a swap and go for replacement:

    http://www.eBay.com/ITM/HP-466803-501-656795-001-6x-Blu-ray-burner-slot-in-drive-envy-Omni-TouchSmart-/121233654476?PT=US_CD_DVD_Blu_Ray_Duplicators & Hash = item1c3a16c2cc

    Here is the Service Manual:

    Manual

    Page 56. Remove the service cover and screw. Drag the old drive on. Remove the cover of the old drive and pop on the new and slide in. You will need a Blu - Ray as the current version of Power DVD burning software and software Blu - Ray as the current version of Nero.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Windows 8 or 8.1 update? HP ENVY TouchSmart all-in - One desktop PC 23-d260qd

    I just bought the HP ENVY TouchSmart all-in-One desktop PC 23-d260qd and it happens today. I wonder if it is better to upgrade to Windows 8.1 instead of windows 8. It seems that several people had problems with the upgrade. I just got my computer today and have yet to open the box, but I wanted to know what OS is better and how I would go about updating Windows 8.1 must be optimal. My computer specs are below:

    • 64-bit Windows 8
    • • 3rd generation Intel® Core™ i7 - 3770S processor [3.1 GHz, 8 MB of shared cache]
    • • 1 GB NVIDIA GeForce GT610M [DX 11, 3. 0a MXM]
    • • 12GB DDR3 1600 MHz SODIMM [DIMM 2]
    • • 2 TB 7200 RPM SATA Hard Drive
    • • Microsoft Office Trial

    Thanks in advance for your suggestions and help!

    Create a recovery disk set before even considering the upgrade.

    If you are not yet accustomed to Windows 8, then give yourself a little time to get familiar with before committing to an upgrade to Windows 8.1.

    I prefer the upgrade of Windows 8.1, in particular the return of the Start button, it is not the same as the Start button was before Windows 8.

    Important factors for Windows 8.1 are available on the web support download portal for your PC.

  • install the tv tuner to HP ENVY TouchSmart all-in-One 23-d160qd

    I have a HP ENVY TouchSmart all-in-One 23-d160qd that I ordered from hp.  I would like to run ota tv via my pc and use it as a dvr.  Is it possible to add the tuner to my all-in-one, or I have to look for other solutions?  What other options are available?  Thank you

    It is not recommended to install certain devices such as TV Tuners within the unit due to the complexity in their design and the ability to add additional hardware. However, you can use the USB TV Tuners and connect to a USB port and start using it for your needs.

  • Incomplete recovery of 17 HP envy touchsmart

    I have a laptop HP Envy Touchsmart product model E1P14AV 17 t-j100 number 17.

    I'm trying to restore to the factory via a USB port, but get incomplete restoration. I tried all the methods of the HP recovery method and all three gave the same answer. It runs through everything and reload the software but gives this answer. If I click on try again it tells me to insert the recovery media.

    Try changing the date in the BIOS to 01/01/2012. Save & Exit. Boot from recovery and to run the process-, but on the first reboot, it initiates enter the BIOS to ensure the update is still. If so let recovery resume - if not change again, then restart.

  • Sound distortion on my envy TouchSmart 4 Ultrabook.

    I just bought an envy TouchSmart 4 Ultrabook (4-1215dx). I'm his deformed/sturation during playback of music or videos.  Any help? Thank you.

    Jwpimentel,

    Please provide the solution which currently has your problem is solved. If you have any other questions don't ' hesitate to ask.

    Nice day.

  • H * ENVY TouchSmart 17-j153cl: H * ENVY TouchSmart 17-j153cl broken hinge

    I searched this forum and Google and YouTube, but have not found a way to repair the left hinge on my laptop of 17-j153cl H * ENVY TouchSmart. The left hinge has separated from the main frame causing the bottom of the laptop to get out of the upper part. Fixing of the screen is still fine. The right hinge has not failed yet, but with the extra pressure in this regard, it may be only a matter of time.

    I am just out of warranty, unfortunately. Are there resources to attempt this repair? I wouldn't break my worst computer he is already going blind.

    Thank you

    -Brian

    @BrianMiller

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).



    If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.



    Thank you for visiting the Forum from HP Support.

  • envy touchsmart 15-j024sa: hard disk hardware kit

    I just got a 15-j024sa envy touchsmart, there a 126 GB ssd card but I need a disc hard material kit part No. 718432-001. If I can fit a 2.5 drive ".  Where can get a please.

    I'm in the United Kingdom.

    Hello

    Please use the following stores:

    http://PartSurfer.HP.com/search.aspx?SearchText=718432-001

    http://www.eBay.co.UK/ITM/HP-envy-15-J-Series-SATA-hard-drive-connector-w-cable-6017B0416801-/131399170824?PT=LH_DefaultDomain_0&hash=item1e98003b08

    http://www.eBay.co.UK/ITM/720545-001-6017B0416801-HP-15-J013CL-envy-15-J-hard-drive-caddy-cable-grade-A-/151187198856?PT=LH_DefaultDomain_0&hash=item2333759388

    http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=547

    Kind regards.

  • Envy 15 K239TX: very bad experience with HP - Eny core i7 1 5th generation HP Envy Touchsmart K239TX 15

    Hello friends

    Last day I ourchased HP Envy Touchsmart K239TX 15 and I am shocked, it is laptop very and very slow and I am very disappointed. My brother 4th core i5 gene and it is very portable fast but my is more recent and new, but his work very and very slow, what to do?  Its 8.1 windows

    I bought brand new sealed packet laptio its renovated not so what I do?

    Is there any solution to make it faster.

    Thank you

    Hi there @Zainshah94,

    Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that your notebook Touchsmart from HP Envy 15 K239TX is slow.

    So I understand perfectly, I just have a few questions for you.

    1 - is your computer laptop itself that is slow, or is it when you browse online?

    2. have you updated any drivers?

    In the meantime, I have a document for you asked to tune (Windows 8) slow system performance.

    Please follow these troubleshooting steps provided in the document and the re-post with information to the above questions.

    Thank you!

    Have a great day!

  • HP X4000b Bluetooth mouse with HP ENVY TouchSmart 15 t-j100 Quad Edition CTO Notebook

    I bought a XP X4000b Bluetooth mouse as a gift for a friend to use with their HP ENVY TouchSmart 15 t-J100 Quad Edition CTO Notebook with Windows 8.1 update 1.  She has developed a very strong aversion to the use of the touchpad of the notebook and has often been expressed that she preferred to use a mouse instead of the touchpad.  Especially for copy and move files between different folders.

    My questions are:

    1 hardware/software of the Touchpad should be disabled or uninstalled before the mouse Bluetooth software and hardware is introduced in order to prevent any conflict?

    2. other than the need to activate Bluetooth support, are there other settings of control panel which will have to be modified in order to use the Bluetooth mouse?

    Thank you.

    lkmcmillen,

    I regret that the document was not useful for you.

    For the Touchpad is disabled, in general you can use both the keyboard and the wireless mouse at the same time. Some computers have a disable command set by default when you add a wireless mouse. It is an option found in Control Panel > devices and printers > mouse that can be enabled or disabled depending on whether you want to use the mouse or not.

    Here is a video on how to for Activate the TouchPad on and off easily according to your preferences when you use a wireless mouse.

    I am including the HP X4000b Bluetooth Pairing User Guide, which explains how to pair your mouse with the computer according to the operating system. What I see in the guide, there are no other settings to change otherwise than to turn on Bluetooth and add the device.

    I hope that is the information that you have when you are looking for.

    Best of luck and have a great day!

Maybe you are looking for

  • I can see my mails in WIn Explorer but cannot import them

    I drilled down to e-mail records stored in Carbonite and restored in a known location. I then tried to import records from tuberculosis, but there are only 3 files imported and all are empty. Records are RECORDS PREMISES, MAIL.COMCAST.NET AND POP3.CO

  • Logging of additional results of step before reminder

    In my sequence, the recall of SequenceFilePreStep checks if a step is a test step (e.g. NumericLimitTest). If this is the case, a value of temperature of an overall picture must be kept at additional step results. Let's say the array of temperature i

  • Outlook 2003

    I would like to know if I can display both my e-mails and my calendar at the same time on one screen, I think I saw it in new versions of Outlook.  Thank you.

  • Replacement hard drive - how to get a license of operating system installed

    HP Pavilion dv6-3133nr Windows 7 64 bit System partitions and recovery are intact (I connected the hard drive to another computer, back up the Documents folder, browsed leave them system and recovery) But with the HARD disk in the Pavilion, I turn it

  • Client VPN connects but cannot ping all hosts

    Here is the configuration of a PIX 501, which I want to accept connections from the VPN software clients.  I can connect successfully to the PIX using the 5.0.0.7.0290 VPN client and I can ping the PIX to 192.168.5.1, but I can't ping or you connect