EPMA 9.3.1 Unable to redepoly once again (not able to choose the deploy of the view)

Similar Questions

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to register cs2 once again, I need to use the part of the program bridge

  I need to register cs2 once again, I need to use the part of the program bridge

  There is nothing you can do to save your version/copy of CS2.  There is a special version for those who own CS2 and need to reinstall.  Infos and downloads are available through the following:

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• How to get google work once again, I tried all of the suggestions I've seen so far!

  The service Google has suddenly stopped working in Firefox. In the box of the home page, of toolbar and to address, when I search I just get a blank screen, no results.

  I uninstalled Firefox and reinstalled from a new download. I checked all add ons and plugins are up-to-date, I did a full system scan to check the malware and nothing seems to work.

  Someone at - it ideas?

  You can check if you have the XML files including Google's default search engines still in the searchplugins folder in the Firefox program folder.
  
  If this isn't the case, then you need to reinstall Firefox.

  Try to use the extension SearchReset reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  • http://KB.mozillazine.org/Unable_to_search_or_add_new_engines

• Adding tags in more than 15 photos at once. Not able to do.

  I am trying to add tags to several images at once, and I get a problem if there are more than 15 selected.  If 15 or less are selected, the details pane reads, "Tags: tag", and clicking on this, I can add a tag. However, when 16 or more are selected, the details pane reads, "show more details... ». If I then click on it, I'll sometimes get "Tags: tag", but at other times not. It seems as if more than 16 are selected and some of those who already have tags, but some do not, that I can't add tags to all. But if they either all have the same tag, or nothing at all, I can always add tags.

  You know any way to add tags to more than 15 images at once, regardless of any tag on one of the photos? Thank you!!! :)

  Have you tried to use the photo gallery program instead?  Microsoft made an optional download, but it provides functions such as File Explorer does not work.

  get it from http://get.live.com

• Even after inserting a disc in the CD/DVD drive, my computer asks once again for a disc in the drive. "Please insert a disk into drive E".

  All of a sudden my computer asks 'for a disc in the drive. Please insert a disk into drive E ". I put an and closed several times and it says all right, then it is said again and again the same message. ?? Help

  Original title: disc E

  Hello

  Thanks a lot for posting your request on this forum. You have reached the right place, and I'll do my best to help you with this question.

  It would be awesome if you can explain this problem with greater clarity. Please provide the following information to help you better with this problem.

  (1) Windows operating system you are using on the computer?

  (2) what exactly you are trying to do on the computer? You try to install games and Applications using the installation CD/DVD?

  (3) what is the exact full error message you get?

  (4) when exactly you get this error message? It's when you try to start the computer?

  (5) are you can play any CD/DVD using the CD/DVD drive on the computer?

  (6) what are the recent changes that you made to your computer before this problem?

  Please get back to us with all the relevant information about this question for assistance. You can see the article below, so that it would be helpful for you to include all the required information.

  Suggestions for a question on the help forums

  Hope it will be useful.

• I'm unable to open .bkf files in Windows 7 that were created in Windows XP. I downloaded the WGAplugin and I'm still not able to open the files.

  How to open .bkf files in Windows 7 that were created in Windows XP?

  See http://www.winhelponline.com/blog/restore-bkf-file-ntbackup-windows-7-vista/

  Microsoft has promised a utility, but it has not yet arrived.

• Once again: too dark prints after the CS3 to CS5 upgrade

  Hi, I know this has been discussed before, but I have not found a solution to my problem in the existing threads. Probably missing me something obvious, and perhaps someone here can point out he me.

  I recently updated from CS3 to CS5. In the two editions of photoshop I followed the recipe of Eric Chan to set up the print workflow: http://people.csail.mit.edu/ericchan/dp/Epson3800/printworkflow.html. In CS3, everything works as expected, i.e. Printing corresponds to the test. Print the image even from the same computer/monitor in CS5 product which is much darker than the softproof printing or printing from CS3.

  In case this is relevant, my psd files are all in Adobe RGB 1998, I use the print Epson provided (v5.51) for the Stylus 3800 diver. I use the icc profile for Epson exhibition fiber paper, which is what I print on. The conversion method is Relative calorimetric with verified Blackpoint Compensation. Photoshop runs on a Windows XP SP3 32-bit computer.

  Any suggestions? Are there settings that are not mentioned in the description of Eric Chan I should look to find the source of the difference? Is there anything that could explain the different random draws?

  Thank you!

  Martin

  > I printed the wacked out of CS3 and CS5 image. In CS3, everything looks good, i.e. the test corresponds to printing. In CS5 the test seems identical to CS3, but printing is dark.

  This is useful information, a kind of conversion took place or the footprints would be blue

  immediately I notice you're using different printer profiles in photoshop CS3 and CS5 print dialog (the text in your screenshot is too blurred to read)

  I have no way of knowing if you have used the same profile in Proofing

  But if photoshop softproof does not match the impression that something is happening, the question is: what?

• Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  You can apply the opacity to images or defining a key position for slide show as well as with the page highlight opacity changes and will bring similar effect.

  Thank you

  Sanjit

• Unable to print on hp 1320 even after installing the upd

  I'm unable to print (even the test pages) on my printer. I tried installing the upd and after days of work on the subject, was finally able to print. But I find that it will not be printed once again today.

  I also notice that there are 2 printers installed. One is called HP PCL5 to universal print and other series hp Laserjet 1320 UPD PCL5. I don't know who I should focus on both printers. I was able to get them to print but now can't get either to print. It is connected to a netgear router.

  Hello

  Please follow the steps in the link below to fix the problem:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=410622&docid=emr_na-c00026681&docLocale=en_US

• I am unable to get my volume and power icons in the tray again.

  I try to get the use of the battery and the volume control in the notification area, I took the necessary steps to activate the icons, but they are gray and turned off so I'm not able to click on it and turn it on. What can I do to get them back in the region of notice... once again, I went to customize and click the icons of the Tower on or off and I couldn't because just the power and volume are grayed out and unable to move, and stuck in the closed position

  Hi Jodaro83,

  If one of the system icons is out, you can reactivate the as follows:

  Right-click on the taskbar and select Properties. This will bring up the tab "properties of menu taskbar and start.  From there, you can click on Customize button on the icons

  section. Look for the icon that you are missing, and check the status. The type of report should read "Hide icon and notifications", change that to "Show icon and notifications".

  If this does not resolve the issue most likely you have a problem with group policy on your machine. This can be corrected by following the instructions on the following link:

  http://www.mydigitallife.info/2009/01/01/fix-network-clock-volume-and-power-battery-system-icons-missing-with-disabled-or-grayed-out-check-box-options/

  Hope this helps,

  Steve <> Microsoft Partner

• View is not to connect to the event db and error unable to connect to the db

  Hello

  while trying to connect the event dB view, I encounter a weird problem where, by getting "unable to connect" error message.

  in the error log I get below error also can you pls help.

  TP-Processor1 > code [ConfigurationManagerBean] ADAM Error: 2 128 com.vmware.vdi.admin.ui.ConfigurationManagerBean.updateDatabaseConfiguration(SourceFile:181)

  com.vmware.vdi.adamwrapper.exceptions.ADAMServerException: database initialization failed, SQL exception when connecting to the database: TCP/IP connection to host failed. java.net.ConnectException: connection refused: connect

  at com.vmware.vdi.admin.be.ConfigurationManager.a(SourceFile:1703)

  at com.vmware.vdi.admin.be.ConfigurationManager.updateDatabaseConfiguration(SourceFile:1580)

  at com.vmware.vdi.admin.ui.ConfigurationManagerBean.updateDatabaseConfiguration(SourceFile:177)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  to com.vmware.vdi.admin.ui.common.ViewFlexFactory$ ViewProxy.invoke (SourceFile:113)

  to com.sun.proxy. $Proxy56.updateDatabaseConfiguration (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:418)

  at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)

  at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1400)

  at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:1011)

  at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:103)

  at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)

  at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)

  at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)

  at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:166)

  at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:291)

  at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:353)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:723)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:646)

  at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)

  at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)

  at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)

  at com.vmware.vdi.admin.ui.servlet.AMFProxyServlet.a(SourceFile:90)

  at com.vmware.vdi.admin.ui.servlet.AMFProxyServlet.doPost(SourceFile:57)

  Hi James,

  It's a SQL API based in the event database connection, it does not need an ODBC connection, see will do for you.

  I just wanted to know what operating system you are using to connect to the server and did you do Windows Update on this machine? If not done it please do.

  restart the machine try connecting the event database. It does not work please check the things mentioned in the KB below

  http://KB.VMware.com/kb/1029537

  You can do one more thing before checking the KB, if the connection to the server OS is windows 2012 and the SQL Windows 2012, take a snapshot of the VM Server conection and proceed to

  under location

  C:\Program Files\VMware\VMware View\Server\broker\shared\lib\sqljdbc-1.2.jar

  Stop all the service view in the connection to the server.

  sqljdbc - 1.2.jar and rename sqljdbc - 1.2.jar.backup.

  Download SQL JDBC 3.0 driver http://www.microsoft.com/en-us/download/details.aspx?id=21599

  extract the downloaded file and copy the sqljdbc4.jar to location (C:\Program Files\VMware\VMware View\Server\broker\shared\lib\)

  also copy same file once more and rename the file to sqljdbc-1.2.jar

  Restart all services server connection and wait 10 minutes, then check the admin page.

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Unable to choose the range in iMovie

  Unable to choose the range of iMovie 10.1.2

  Hi, Jeff.

  You can select a range inside a clip with your clip in the timeline, placing your cursor on it and hold the 'r' key when you drag your cursor over the clip while pressing your mouse or track pad.  The range will be described in a yellow box.

  To select a range of multiple clips, select the first clip, and then select the last element while holding down the SHIFT key.

  Best,

  -Rich