Vista - Windows Update problem

Similar Questions

• Satellite L650 - 11Z - Windows update problem 800706BE/800706BA

  Hey,.

  I have problems with the automatic update on windows 7 64 bit. I bought this laptop (Toshiba Satellite L650 - 11Z) last July.

  When the computer begins to do the automatic update, there a while and reports the problems mentioned in the subject.

  I tried to find help for Windows support, but there is a statement, that if windows is installed in the laptop before buying it, I should consult the producer of the computer.

  Matias

  Hello

  I found this info on the 800706BE error:
  + Error 800706BA is a standard Windows error with many causes. It more often refers to Microsoft COM Internet Services (CIS) on the call of client DCOM Distributed Component Object Model (RPC_S_SERVER_UNAVAILABLE); the RPC server is unavailable (Windows Event ID) 1722. That's when a RPC request expires and 800706BA error results. +

  I found this here:
  http://www.Symantec.com/business/support/index?page=content&ID=TECH54543

  Here are also a few details and proposals for solution of Microsoft:
  http://Windows.Microsoft.com/en-in/Windows7/Windows-Update-error-8024000B
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Hope this helps

• KB2676562 error 80070490 Windows update problem

  original title: Windows Update problem

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  Have you tried everything in this article: http://support.microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  If this method does not resolve the problem, go to method 2.

  Method 2: perform a Windows repair installation

• Windows Update problems 0x8024a005

  problems of updating Windows 7 every time I try to update I get error 0x8024a005 next

  OT:

  Windows Update problems

  Try the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Disable third-party firewalls.

  Also: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/win-7-updates-keep-repeating/12ecb219-c374-e011-8dfc-68b599b31bf5

  J W Stuart: http://www.pagestart.com

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• How can I fix windows update agent 32-bit vista Windows Update agent 7.6.7600.256 keep for lack of 8007041D error code

  How can I fix windows update agent 32-bit vista Windows Update agent 7.6.7600.256 keep for lack of 8007041D error code

  Clean boot tried tried reboot fix he said componet needs to be repaired

  Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. when (date about) don't you buy the computer?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  5 are ALL the following updates listed in installed updates (not update history)? [1]

  (a) KB2705219, KB2712808, KB2744842 [KB2722913 or KB2719177 or KB2699988], KB2731847 [or KB2718523] and maybe KB2736233;

  (b) KB2698365, KB2691442, KB2655992 & KB2719985 [or maybe KB2721691];

  (c) KB2685939 and possibly KB2686833.

  (d) KB2658846, KB2659,262, KB2660649,562, KB2688338 & KB2690533 KB2676;

  (e) KB2393802 KB2644615, KB2633171, and especially KB971029.

  6. If Windows Vista Service Pack 2 is listed in the installed updates, when (the exact date) he was installed according to the history of the update (this time)? [2]

  7A. is the 7 Version of Java Update 7 (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://java.com/en/download/installed.jsp

  7 b. v11.4.402.278 is Adobe Flash Player (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://www.adobe.com/software/flash/about/7. Is Firefox, Chrome or any other alternative browser installed?

  8 is Firefox or another alternative browser installed in addition to Chrome?

  9 have you ever had the opportunity to do a repair installation or a clean installation of Windows?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner Registry Cleaner)?

  ==================================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

  [2] start | Control Panel | Windows Update | View the update history (in the left menu)

• Windows Update problem - 0 * 80070005

  * Original title: windows update problem

  I'm not get windows updates.so I run the program update troubleshooter.in windows he showed the error of update problem as... windows 0 * 80070005 (2016_05_17_T_06_03_42P) .and this problem was not fixed. and again, I have no answer answer.pl.

  First of all

  KB3138612 would be the last for a manual installation

  The first would actually KB3145739

  Homepage for all versions,

  https://TechNet.Microsoft.com/library/security/MS16-039

  After that you manually install you KB3153199

  I would also like to before doing this,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

• RC of Windows 7 / Vista pointer of the ultimate mouse & Windows Update problem?

  Have a Dell XPS 630i and made a new instalation of Vista Ultimate, and Windows 7 RC 64-bit and have the same problem with TWO operating systems after installation.

  Performance and once installed, Windows Update, the mouse pointer will NOT click on the boxes to the left, updates to install specific updates, but will allow me to check the box to install all the.

  It happens in the TWO operating systems.

  Windows 7 also freezes on "restart" mainly on the part 'stop' to reboot.
  Periodically, the system will also freeze if left running for 4-5 hours?

  Thought it may be computer, rather than the operating system, but all the troubleshooting tests do show no problem?

  any help would be appreciatd

  Thank you.

  Performed a clean installation on a computer, using a much more ancient, well-known usb keyboard and mouse and questions GONE!

  After the installation, all the drivers, in good order, and ran to Windows Update to get all THE updates without any problem.

  It could issue NEW hardware, as the keyboard and mouse have been included with recent computer purchase.

• Full Windows Vista Edition update problem

  I got the upgrade to Windows Vista Ultimate Edition to SP2 as shown in the screen of the Microsoft System. Update agent 7.6.760.256 said as installed successfully in the history, but not in the installed list. The system is now a loop looking for new updates.

  All of the suggestions.

  Victor

  To resolve the problem you're having with Windows updates, check if running the Windows Update troubleshooting tool from the link below works:
  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-Vista

  If the problem persists, restore your Windows Update components following the instructions mentioned on the link below and see if that solves the problem:
  https://support.Microsoft.com/en-us/KB/971058

  If the problem is still not resolved, run the System Update Readiness tool from the link below and see if it works:
  https://support.Microsoft.com/en-us/KB/947821

  Hope this will help you.

• update of Windows vista home premium w/sp2 kb978207 IE8 for vista security update problems

  I finally understand exactly update has been the cause of my problems with my laptop could not complete the startup after installing an update.

  System: vista home premium w/serv pack 2
  Antivirus: Avira
  other notable programs: itunes, roxio creator media, Skype, messenger, yh, IE8, msn messenger

  I tried several times to install IE8 KB978207 update without success. The last time I tried it, he first gave me an error code of 8024200d, then I reinstalled it. I finally understood by installing the updates one at a time which caused my laptop to not be able to run the start afterreboot after you install updates. I end up having to run the diagnostic tool for starting and when it finishes, I check the error log and it tells me that the reason that she didn't was due to a patch, then using the advanced features to restore my system before installing KB978207.

  Does anyone have a solution to get this installed correctly?

  Jon

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista - Windows Update service does not work

  Windows Vista 32-bit sp2... Its said that for a while and I think I got malware or spyware, virus, because updates have been down.

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update problems - you must run Microsoft Internet Explorer 5 or later

  Whenever I try to go to windows update I get this

  Thank you for your interest to get updates of our site.

  To use this site, you must run Microsoft Internet Explorer 5 or later.

  To upgrade to the latest version of the browser, go to the website downloads of Internet Explorer.

  If you prefer to use another web browser, you can get updates from the Microsoft Download Center , or you can stay up to date with the latest reviews and updates using automatic updates. To turn on automatic updates:

  1. Click Startand then click Control Panel.
  2. Depending on which control panel view you use, classic or category, do one of the following:
     • Click System, and then click the automatic updates tab.
     • Click performance and Maintenance, click System, and then click the automatic updates tab.
  3. Click the option you want. Make sure that automatic updates is not turned off.

  am under explore 8 and it is updated. Is there any help out there for this? I'll be bald if I can't solve this problem quickly.

  I will try to reinstall the Windows Update Agent Installer.  Here is a link to the Microsoft site that explains how to do this: http://support.microsoft.com/kb/949104.

  Go to the section How to get the last agent to update as it is already installed.  Scroll down to the section on the additional information tab called Windows Vista, Windows Server 2008, Windows XP, Windows Server 2003 and Windows 2000 Service Pack 4 (I checked that it also works under Windows 7).   Choose one that fits your computer (x 86, x 64, Itanium).  Run this update and follow the instructions.  Windows Update will now be reinstalled, but it's a good idea to restart at this point.

  I hope this will solve your problem.

  Barbara

• Windows Vista, windows update error Code 80072F8F

  I get the error code 80072f8f. I searched the forums of discussion for something that will help, but nothing helped. I also lost the ability to use the system restore. I checked my timestamp in windows and it shows the date and time correctly. I even went into my bios to make sure that my system time was correct. Both are. I went to this Web page http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10acefdc-297f-4d14-9f5c-5a90250a8b8c and followed the instructions but had no luck either.

  I don't know if system restore is a symptom of the same problem or one of its own. I ran into this problem when I tried to install a netgear 311t wireless network card. I have since deleted from the card and uninstalled the software, I don't know if the map was part of the question, but I noticed when I tried windows update in order to get a driver for the card. I am running Windows vista Home premium 32-bit on a Pentium D 3.00 ghz with 3.5 g of ram. Any help would be great. Thank you.

  Chris

  I was afraid you might say that!

  OPTION 1: Contact the Symantec Support.

  OPTION 2: Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the Norton removal tool (new) before installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (e.g., SAV, Microsoft Security Essentials - free).

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  Wish I had better news for you. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows update PROBLEM - always needs to change first the file distribution system

  I am running with Windows Vista Home Basic Edition and are struggling to update my files after a clean reinstall.  Finally got through many strategies, but doing so thereafter (once) noticed that the failures occurred each time that the "System of Distribution" file in the windows folder has not had been empty of logs and the previous downloads.  Don't know what that means.  Any ideas?  Could there be a problem with the hard drive, processor, motherboard, short circuit? (Have no problems downloading on other computers in my house, my overall connection is good).

  Thank you.

  Hi Loraoshea,

  You can read the following article and try to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.