ePrint broke up with IOS6
ePrint no longer works on my: -.
iPhone 4s, iPad 2, new iPad, iPhone 4, since the upgrade to IOS6.
The same applies to 2 wifi networks different and 3 different printers HP (2 x B210, 1xB109). I noticed on the web, that it applies to others. Although Airprint still works it is not easy to print A4 prints with it. done ePrint is easy.
Can someone fix it and release an update soon.
Thanks for the update.
Works perfectly.
Yes very well done HP.
Tags: HP Printers
Similar Questions
-
Broke up with iOS 9.2.1 contact ID
Touch on my iPhone 6s ID broke out after I have updated to IOS 9.2.1. I rebooted twice with no luck.
Any ideas?
Hello, Nealf.
It seems that you are having problems with Touch ID recently updated to iOS 9.2.1. The following Knowledge Base article offers some great recommendations for troubleshooting:
Use the ID button on iPhone and iPad
Get help with Touch ID
Sometimes, you will need to enter your access code or your Apple ID instead of using Touch ID:
- If you have just restarted your device
- If your fingerprint is not recognized five times in a row
- If you have not unlocked your device to more than 48 hours
- If you have just registered or deleted fingerprints
- If you try to open the contact ID & password in the settings menu
- If necessary password is defined on immediately under settings > general > Restrictions
If you still need help, follow these steps. Try again after each step:
- Make sure you have the latest version of iOS.
- Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
- Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not press hard, tap too quickly or move your finger.
- If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
- Tap Settings > Touch ID & password. Make sure the Unlock iPhone or iTunes and App Store is on, and that you have entered one or more fingerprints.
- Try to register another finger.
- If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.
1 moisture, sweat, lotions, oils, cuts, or dry skin may affect fingerprint recognition. Certain activities can also temporarily affect the recognition of fingerprints, including exercise, shower, swimming, cooking, or other conditions or changes that affect your fingerprints.
Thank you for reaching out to the communities of Apple Support.
See you soon.
-
Passage of custody of data with broker fails with ORA-16570 / ORA-16665
I'm using Data Guard 11 g on Windows Server 2012 64 Bit. Recently, I have configured the broker to manage the permutations more uncomfortable.
Unfortunately the digital switchover does not work. Broker Setup seems fine, since I can activate t and redo apply works perfectly...
Now, the behavior is as follows... Once I put the passage through brokers, it shows the following:
DGMGRL > passage to the smart_stb
Continue to pass, please wait...
Error: ORA-16665: wait for the result of a database
Failed.
Unable to failover, primary database is always "smart".
The digital switchover happens, there is no restart of the primary database well! Does not appear to be linked to a DGMGRL buggy service entrance. In fact the database will not yet descended. The principal is supending all processes while trying to do so. Broker runs into a timeout, of course, but the principal remains in a State of supending. The primary doesn't seem to be able to cominicate with side standby or vice versa. Which is strange since the restoration of log shipping and apply is workng fine as mentioned... do a manual failover. I don't know what could cause this kind of behavior... Double checked everything. Once I restart the two databases and align on the rule of law that the digital transition is complete. But Needless to say that it is not intending to use the broker...
Primary DRC.log States the following:
2014-09-10 746441090-02000000 MICHAEL 09:13:01.378: PASSAGE to smart_stb
2014-09-10 746441090-02000000 MICHAEL 09:13:01.378: start execution of the task: the DIGITAL switchover
2014-09-10 09:13:01.378 NSV1: using RFIUPI_DGCI_CDESC
2014-09-10 09:13:01.409 NSV1: using RFIUPI_DGCI_CDESC
2014-09-10 09:13:01.409 02001000 746441090 notifier Oracle Clusterware to the primary database of disassembly for the DIGITAL switchover
2014-09-10 09:13:01.425 ACLS: not configured CRS, config = 2
.
2014 09-10 02001000 746441090 MICHAEL 09:13:01.425: display primary instances for PASSAGE of phase 1
2014 09-10 02001000 746441090 MICHAEL 09:13:01.425: State of rfi_post_instances() for CTL_SWITCH = ORA-00000
2014-09-10 09:13:01.425 INSV: message received for publication of inter - the instance
2014 09-10 02001000 746441090 MICHAEL 09:13:01.425: dispersants message to STANDBY for TRANSITION phase BEGIN
2014-09-10 09:13:01.425 req ID 1.1.746441090, CTL_SWITCH opcode, phase BEGIN, 5 flags
2014-09-10 09:13:01.425 NSV1: using RFIUPI_DB_INST_CDESC
2014 09-10 02001000 746441090 MICHAEL 09:13:01.425: entered rfmsoexinst() for phase BEGIN
2014-09-10 09:13:01.425 INSV: response for message with
2014-09-10 09:13:01.425 req ID 1.1.746441090, CTL_SWITCH opcode, phase BEGIN
2014 09-10 02001000 746441090 MICHAEL 09:13:01.425: primary instances display for transition to THE phase 2
2014 09-10 02001000 746441090 MICHAEL 09:13:01.440: State of rfi_post_instances() for CTL_SWITCH = ORA-00000
2014-09-10 09:13:01.440 INSV: message received for publication of inter - the instance
2014 09-10 02001000 746441090 MICHAEL 09:13:01.440: dispersants message to STANDBY for transition to THE phase of DISMANTLING
2014-09-10 09:13:01.440 req ID 1.1.746441090, opcode CTL_SWITCH, disassembling, 5 flags
2014 09-10 02001000 746441090 MICHAEL 09:13:01.440: entered rfmsoexinst() for disassembling
2014-09-10 09:13:01.440 RSM0: received the State value ask: rid = 0 x 01041001, sid = 0, phid = 1, econd = 2, sitehndl = 0 x 02001000
2014-09-10 09:13:01.440 Log transport resources: SetState OFFLINE, DISASSEMBLY phase, external Cond SWITCH-OVER-PHYS_STBY
2014-09-10 09:13:01.440 RSM0: received the State value ask: rid = 0 x 01011001, sid = 4, phid = 1, econd = 2, sitehndl = 0 x 02001000
2014-09-10 09:13:01.440 of database Resource [IAM = PRIMARY]: 0 x 02001000 SetState PHYSICAL-APPLY-ON, DISASSEMBLY phase, external Cond SWITCH-OVER-PHYS_STBY, handful of Site target
2014-09-10 09:13:01.440 RSM0: execution of SQL [ALTER DATABASE COMMIT to SWITCH STANDBY mode PHYSICS WITH the STOP of the SESSION]
2014-09-10 09:13:06.630 SQL [ALTER DATABASE COMMETTRE at PHYSICS CROSSING SHALL WITH SESSION SHUTDOWN] executed successfully
2014-09-10 09:13:06.630 RSM: compensation IncarnationTable internal property of the site 0 x 01010000
2014 09-10 02001000 746441090 MICHAEL 09:13:06.630: Broker determines this restart of the instance is necessary: operation = status = ORA-16570
2014 09-10 02001000 746441090 09:13:06.630 resources: smart (01011001) State: PHYSICAL-APPLY-ON
2014-09-10 09:13:06.630 INSV: response for message with
2014-09-10 09:13:06.630 req ID 1.1.746441090, CTL_SWITCH, disassembling opcode
2014 09-10 02001000 746441090 MICHAEL 09:13:06.630: Instance 'smart' (ID 1) returned ORA-16570
2014-09-10 09:13:06.630 02001000 746441090 for disassembling of the CTL_SWITCH operation
2014-09-10 09:13:06.646 NSV1: using RFIUPI_DGCI_CDESC
2014 09-10 02001000 746441090 MICHAEL 09:13:06.646: primary instances display for transition to THE phase 2
2014-09-10 09:13:06.646 INSV: message received for publication of inter - the instance
2014 09-10 02001000 746441090 MICHAEL 09:13:06.646: State of rfi_post_instances() for CTL_SWITCH = ORA-00000
2014-09-10 09:13:06.646 req ID 1.1.746441090, opcode CTL_SWITCH, disassembling, 5 flags
2014 09-10 02001000 746441090 MICHAEL 09:13:06.646: dispersants message to STANDBY for transition to THE phase of DISMANTLING
2014 09-10 02001000 746441090 MICHAEL 09:13:06.646: entered rfmsoexinst() for disassembling
2014-09-10 09:13:06.646 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:13:06.646 INSV: response for message with
2014-09-10 09:13:06.646 req ID 1.1.746441090, CTL_SWITCH, disassembling opcode
2014 09-10 02001000 746441090 MICHAEL 09:13:06.646: Instance 'smart' (ID 1) returned ORA-16570
2014-09-10 09:13:06.646 02001000 746441090 for disassembling of the CTL_SWITCH operation
2014-09-10 09:13:28.619 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:13:28.619 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:13:43.620 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:13:43.620 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:13:58.639 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:13:58.639 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:14:13.657 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:14:13.657 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:14:28.674 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:14:28.674 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:14:43.676 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:14:43.676 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:14:58.693 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:14:58.693 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:15:13.695 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:15:13.695 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:15:28.707 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:15:28.707 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:15:43.724 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:15:43.724 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:15:58.726 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:15:58.726 NSV1: smart_stb returned ORA-16665 Site.
2014-09-10 09:16:13.727 NSV1: using RFIUPI_DB_INST_CDESC
2014-09-10 09:16:13.727 NSV1: smart_stb returned ORA-16665 Site.
2014 09-10 02001000 746441090 MICHAEL 09:16:28.729: database smart_stb returned ORA-16665
2014-09-10 09:16:28.729 02001000 746441090 opcode = CTL_SWITCH, phase = DISASSEMBLY, req_id = 1.1.746441090
2014-09-10 09:16:28.729 02001000 746441090 CTL_SWITCH operation cancelled during phase 2, error = ORA-16665
2014 09-10 02001000 746441090 MICHAEL 09:16:28.729: ORA-16665 stateful failover operation failed
2014-09-10 09:16:28.729 NSV1: using RFIUPI_DGCI_CDESC
2014 09-10 02001000 746441090 MICHAEL 09:16:28.744: display primary instances for PASSAGE of phase 5
2014-09-10 09:16:28.744 INSV: message received for publication of inter - the instance
2014 09-10 02001000 746441090 MICHAEL 09:16:28.744: State of rfi_post_instances() for CTL_SWITCH = ORA-00000
2014-09-10 09:16:28.744 req ID 1.1.746441090, CTL_SWITCH opcode, phase END, 5 flags
2014 09-10 02001000 746441090 MICHAEL 09:16:28.744: passage to the aborted due to errors
2014 09-10 02001000 746441090 named Site 09:16:28.744: smart is always primary school
2014 09-10 02001000 746441090 error 09:16:28.744 = ORA-16665
DRC.log Eve shows the following:
2014-09-10 09:13:01.352 02001000 746441090 notify Oracle Clusterware base ensures target disassembly of passing data to the
2014-09-10 09:13:01.367 ACLS: not configured CRS, config = 2
.
2014 09-10 02001000 746441090 MICHAEL 09:13:01.367: display of bodies sleep for transition to THE phase 1
2014-09-10 09:13:01.367 INSV: message received for publication of inter - the instance
2014-09-10 09:13:01.367 req ID 1.1.746441090, CTL_SWITCH opcode, phase BEGIN, 5 flags
2014 09-10 02001000 746441090 MICHAEL 09:13:01.367: entered rfmsoexinst() for phase BEGIN
2014-09-10 09:13:01.367 INSV: response for message with
2014-09-10 09:13:01.367 req ID 1.1.746441090, CTL_SWITCH opcode, phase BEGIN
2014 09-10 02001000 746441090 MICHAEL 09:13:01.367: entered rfm_release_chief_lock() for CTL_SWITCH
2014 09-10 02001000 746441090 MICHAEL 09:13:06.571: entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
2014 09-10 02001000 746441090 MICHAEL 09:13:06.571: start execution of the task: the DIGITAL switchover
2014 09-10 02001000 746441090 MICHAEL 09:13:06.586: display of bodies sleep for transition to THE phase 2
2014-09-10 09:13:06.586 INSV: message received for publication of inter - the instance
2014-09-10 09:13:06.586 req ID 1.1.746441090, opcode CTL_SWITCH, disassembling, 5 flags
2014 09-10 02001000 746441090 MICHAEL 09:13:06.586: entered rfmsoexinst() for disassembling
2014-09-10 09:13:06.586 RSM0: received the State value ask: rid = 0 x 02031001, sid = 0, phid = 1, econd = 2, sitehndl = 0 x 02001000
2014-09-10 09:13:06.586 redo apply the resource: SetState OFFLINE, DISASSEMBLY phase, external Cond SWITCH-OVER-PHYS_STBY
2014-09-10 09:13:06.586 RSM0: received the State value ask: rid = 0 x 02012001, sid = 9, phid = 1, econd = 2, sitehndl = 0 x 02001000
2014-09-10 09:13:06.586 of database Resource [IAM = PHYSICS]: handle target SetState-READ-WRITE-XPTON Site, DISMANTLING phase, external SWITCH-OVER-PHYS_STBY, 0 x 02001000 Cond
2014-09-10 09:13:06.586 RSM0: execution of SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL]
2014-09-10 09:13:07.602 SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL] executed successfully
2014-09-10 09:13:07.711 RSM0: execution of SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE through FINAL passage to THE NODELAY]
2014-09-10 09:13:09.509 SQL [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE BY LAST crossing THE NODELAY] executed successfully
2014-09-10 09:13:09.509 RSM0: execution of SQL [ALTER DATABASE COMMIT to SWITCHING to the MAIN WAITING WITH the STOP of the SESSION]
2014-09-10 09:13:11.345 SQL [ALTER DATABASE COMMETTRE to TRANSITION to PRIMARY WAIT WITH SESSION SHUTDOWN] executed successfully
2014-09-10 09:13:11.345 of database Resource successful SetState
2014-09-10 09:13:11.345 INSV: response for message with
2014-09-10 09:13:11.345 req ID 1.1.746441090, CTL_SWITCH, disassembling opcode
2014 09-10 02001000 746441090 MICHAEL 09:13:11.345: entered rfm_release_chief_lock() for CTL_SWITCH
2014-09-10 09:13:28.555 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:13:43.555 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:13:58.571 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:14:13.590 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:14:28.605 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:14:43.606 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:14:58.622 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:15:13.625 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:15:28.641 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:15:43.646 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:15:58.652 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014-09-10 09:16:13.653 drcx: found the task req_id = 1.1.746441090, PROBE, but the phase is carried out
2014 09-10 02001000 746441090 MICHAEL 09:16:27.606: Data Guard Broker ending NSV0, timed out waiting for a response from the smart database
2014 09-10 02001000 746441090 MICHAEL 09:16:27.825: smart database returned ORA-16662
2014-09-10 09:16:27.825 02001000 746441090 opcode = CTL_SWITCH, phase = RESYNCHRONIZATION, req_id = 1.1.746441090
2014 09-10 02001000 746441090 MICHAEL 09:16:42.840: Data Guard Broker ending NSV0, timed out waiting for a response from the smart database
2014 09-10 02001000 746441090 MICHAEL 09:16:42.840: smart database returned ORA-16662
2014-09-10 09:16:42.840 02001000 746441090 opcode = CTL_SWITCH, phase = RESYNCHRONIZATION, req_id = 1.1.746441090
2014 09-10 02001000 746441090 MICHAEL 09:16:57.861: Data Guard Broker ending NSV0, timed out waiting for a response from the smart database
2014 09-10 02001000 746441090 MICHAEL 09:16:57.861: smart database returned ORA-16662
2014-09-10 09:16:57.861 02001000 746441090 opcode = CTL_SWITCH, phase = RESYNCHRONIZATION, req_id = 1.1.746441090
2014-09-10 09:16:58.705 746441091 00001000 MICHAEL: entered rfm_get_chief_lock() for HEALTH_CHECK, reason 0
2014-09-10 09:16:58.705 746441091 00001000 MICHAEL: task to free the 1.1.746441090 orphans, opcode = CTL_SWITCH.
2014-09-10 09:16:58.705 746441091 00001000 MICHAEL: start the task execution: automated healthcheck
2014-09-10 09:16:58.720 746441091 00001000 MICHAEL: start-up of the health check
2014-09-10 09:16:58.720 INSV: message received for publication of inter - the instance
2014-09-10 09:16:58.720 746441091 00001000 MICHAEL: rfi_post_instances() status = ORA-00000
2014-09-10 09:16:58.720 req ID 1.1.746441091, HEALTH_CHECK opcode, phase BEGIN, 5 flags
2014 09-10 00000000 746441091 MICHAEL 09:16:58.720: entered rfmhcexinst
2014 09-10 00000000 746441091 MICHAEL 09:16:58.720: rfmhcexinst call transfer
2014-09-10 09:16:58.720 RSM0: receipt get status request: rid = 0 x 02012001, sid = 4
2014-09-10 09:16:58.720 RSM0: HEALTH CHECK ERROR: ORA-16816: incorrect database role
2014-09-10 09:16:58.720 WARNING: given RCS 281474976710655 with resetlogs_id = 851952614 is less than resetlogs_change # 744657 of the incarnation.
2014-09-10 09:16:58.736 current IncarnationTable value is:
2014-09-10 09:16:58.736 2,744657,851952614,1, * 851351631, 1, 1, 0, #.
2014-09-10 09:16:58.736 RSM0: HEALTH CHECK ERROR: ORA-16700: the standby database has diverged from the primary database
2014-09-10 09:16:58.970 00000000 746441091 HEALTH_CHECK operation cancelled during phase 1, error = ORA-16810
2014-09-10 09:16:58.970 RSM0: receipt get status request: rid = 0 x 02031001, sid = 1
2014-09-10 09:16:58.970 00000000 746441091 MICHAEL: standby Instance completed the health check
2014-09-10 09:16:58.970 INSV: response for message with
2014-09-10 09:16:58.970 req ID 1.1.746441091, HEALTH_CHECK opcode, phase BEGIN
2014-09-10 09:16:58.970 MICHAEL: HEALTH CHECK ERROR: ORA-16766: redo apply is stopped
2014-09-10 09:16:58.970 MICHAEL: aggregation based on H/C, db 0 x 02001000 has gravity = 16501, status = 16810
2014-09-10 09:16:58.970 00000000 746441091 HEALTH_CHECK operation cancelled during phase 1, error = ORA-16810
2014-09-10 09:16:58.970 INSV: message received for publication of inter - the instance
2014-09-10 09:16:58.970 req ID 1.1.746441091, HEALTH_CHECK opcode, phase BEGIN, flags 20005
2014-09-10 09:16:58.970 MICHAEL: aggregation based on H/C, db 0 x 02001000 has gravity = 16501, status = 16810
2014-09-10 09:16:58.970 INSV: response for message with
2014-09-10 09:16:58.970 req ID 1.1.746441091, HEALTH_CHECK opcode, phase BEGIN
2014 09-10 00000000 746441091 MICHAEL 09:17:02.017: entered rfm_release_chief_lock() for HEALTH_CHECK
2014-09-10 09:17:13.724 drcx: task req_id is not found = 1.1.746441091 for PROBE.
2014-09-10 09:17:28.730 drcx: task req_id is not found = 1.1.746441091 for PROBE.
Primary alert.log indicates the following:
LNS: Standby redo log file selected for thread 1 sequence 12046 for destination LOG_ARCHIVE_DEST_2
My Nov 10 09:13:01, 2014
ALTER DATABASE COMMIT TO SWITCH STANDBY MODE PHYSICS WITH THE STOP OF THE SESSION
My Nov 10 09:13:01, 2014
Thread 1 Advanced to record the sequence 12047 (switch LGWR)
Currently Journal # 2 seq # 12047 mem # 0: X:\SMART\LOG1\SMART_21.LOG
Currently Journal # 2 seq # 12047 mem # 1: Y:\SMART\LOG2\SMART_22.LOG
Stop background QMNC process
My Nov 10 09:13:01, 2014
Arc1: Evaluating archive log 1 thread 1 sequence 12046
CLOSING: kill the server sessions.
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 15708 user ' ORACLE. EXE (W000)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
Program 'SYSTEM' of active processes 13372 user ' ORACLE. EXE (W001)"
CLOSED: all the closing of sessions successfully.
krss_find_arc: selection ARC2 to receive the message as a last resort
Waiting for all non-current archive ORLs...
Waiting for thread 1 sequence 12046 ORL to archive...
My Nov 10 09:13:02 2014
Arc0: Assessment of 1 thread 1 sequence 12046 log archives
My Nov 10 09:13:02 2014
ARC2: Evaluating archive log 1 thread 1 sequence 12046
Arc0: Unable to archive the thread 1 sequence 12046
Newspapers archived by another process
ARC2: Impossible to archive the thread 1 sequence 12046
Newspapers archived by another process
Involved the creation of the archivelog 'W:\SMART\ARC\SMART_12046_1_851952614.ARC '.
Archived journal 19372 extra for each sequence 1 12046 0xab72f94c dest ID thread entry 1:
ENT for thread 1 12046 sequence have been archived...
All non-current ORLs have been archived.
Waiting for all FAL entries to archive...
All FAL entries were archived.
Waiting for dest_id 2 can be synchronized...
OCISessionBegin with PasswordVerifier succeeded
Client pid [12320] annexed to the RFS pid [3648] number of the remote instance [1] to dest "smart_dg_stb."
Physical passage target Active, synchronized sleep has been identified
Transition to the end-of-Redo Log thread 1 sequence 12047 has been fixed
The digital switchover: primary YVERT seen above the value 0x0.0x22345d2
ARCH: Noswitch of archiving the thread 1, sequence 12047
ARCH: End-of-Redo archive thread 1 sequence 12047 branch
ARCH: Evaluating archive log 2 thread 1 sequence 12047
ARCH: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
ARCH: Transmitting the activation 0xab72f94c ID
OCISessionBegin with PasswordVerifier succeeded
Client pid [12244] annexed to the RFS pid [9972] number of the remote instance [1] to dest "smart_dg_stb."
ARCH: Standby redo log file selected for thread 1 sequence 12047 for destination LOG_ARCHIVE_DEST_2
Involved the creation of the archivelog 'W:\SMART\ARC\SMART_12047_1_851952614.ARC '.
Archived journal 19373 extra for each sequence 1 12047 0xab72f94c dest ID thread entry 1:
Archived journal 19374 extra for each sequence 1 12047 0xab72f94c dest ID thread entry 2:
ARCH: Archiving is disabled due to the current archive log file
Primary will check some generator of target of receiving of alls again
Final inspection for a target standby synchronized. Verification will be made once.
ARCH: Transmitting the activation 0xab72f94c ID
LOG_ARCHIVE_DEST_2 is a potential target of the transition to physical standby
Active, synchronized target has been identified
Target has received also redo all the
-----------------------------------------------------------
| Target the waking state.
| LOG_ARCHIVE_DEST_1: NO ACTIVE |
| LOG_ARCHIVE_DEST_2: RECEIVED ALL DATA.
| LOG_ARCHIVE_DEST_3: NO ACTIVE |
| LOG_ARCHIVE_DEST_4: NO ACTIVE |
| LOG_ARCHIVE_DEST_5: NO ACTIVE |
| LOG_ARCHIVE_DEST_6: NO ACTIVE |
| LOG_ARCHIVE_DEST_7: NO ACTIVE |
| LOG_ARCHIVE_DEST_8: NO ACTIVE |
| LOG_ARCHIVE_DEST_9: NO ACTIVE |
| LOG_ARCHIVE_DEST_10: NO ACTIVE |
| LOG_ARCHIVE_DEST_11: NO ACTIVE |
| LOG_ARCHIVE_DEST_12: NO ACTIVE |
| LOG_ARCHIVE_DEST_13: NO ACTIVE |
| LOG_ARCHIVE_DEST_14: NO ACTIVE |
| LOG_ARCHIVE_DEST_15: NO ACTIVE |
| LOG_ARCHIVE_DEST_16: NO ACTIVE |
| LOG_ARCHIVE_DEST_17: NO ACTIVE |
| LOG_ARCHIVE_DEST_18: NO ACTIVE |
| LOG_ARCHIVE_DEST_19: NO ACTIVE |
| LOG_ARCHIVE_DEST_20: NO ACTIVE |
| LOG_ARCHIVE_DEST_21: NO ACTIVE |
| LOG_ARCHIVE_DEST_22: NO ACTIVE |
| LOG_ARCHIVE_DEST_23: NO ACTIVE |
| LOG_ARCHIVE_DEST_24: NO ACTIVE |
| LOG_ARCHIVE_DEST_25: NO ACTIVE |
| LOG_ARCHIVE_DEST_26: NO ACTIVE |
| LOG_ARCHIVE_DEST_27: NO ACTIVE |
| LOG_ARCHIVE_DEST_28: NO ACTIVE |
| LOG_ARCHIVE_DEST_29: NO ACTIVE |
| LOG_ARCHIVE_DEST_30: NO ACTIVE |
| LOG_ARCHIVE_DEST_31: NO ACTIVE |
------------------------------------------------------------
Backup controlfile written to find the D:\ORACLE\ORA_DBA\SMART\TRACE\diag\rdbms\smart\smart\trace\smart_rsm0_12244.trc file
Compensation pending activation ID 2876438860 (0xab72f94c)
The primary database controlfile is created using the
Clause 'MAXLOGFILES 255'.
There is space for the log files waiting for redo up to 251
Use the following SQL commands on the standby database to create
waiting for redo logfiles that correspond to the primary database:
ALTER DATABASE add STANDBY LOGFILE 'srl1.f' SIZE 52428800.
ALTER DATABASE add STANDBY LOGFILE 'srl2.f' SIZE 52428800.
ALTER DATABASE add STANDBY LOGFILE 'srl3.f' SIZE 52428800.
ALTER DATABASE add STANDBY LOGFILE 'srl4.f' SIZE 52428800.
ALTER DATABASE add STANDBY LOGFILE 'srl5.f' SIZE 52428800.
ARCHIVELOG for thread 1 sequence 12047 required for recovery of the eve
The digital switchover: converted primary Controlfile controlfile standby successfully.
The digital switchover: Complete - closing of the database required
Completed: ALTER DATABASE COMMIT to SWITCH STANDBY mode PHYSICS WITH the STOP of the SESSION
My Nov 10 09:13:20 2014
(Ospid 12320) process is suspended due to the transition to a physical relief operation.
My Nov 10 09:16:58 2014
(Ospid 12244) process is suspended due to the transition to a physical relief operation.
My Nov 10 09:17:08 2014
Process (ospid 3080) is suspended due to the transition to a physical relief operation.
My Nov 10 09:17:09 2014
Process (ospid 12636) is suspended due to the transition to a physical relief operation.
My Nov 10 09:17:10 2014
Process (ospid 5292) is suspended due to the transition to a physical relief operation.
My Nov 10 09:17:43 2014
RSM0, PID = 12244 process, will be killed
My Nov 10 09:17:44 2014
RSM0 started with pid = 27, OS id = 16280
My Nov 10 09:20:56 2014
minact-RCS: received the error during the scan e:12751 usn:6 useg
minact-SNA: useg scan slip on with error e:12751
My Oct 10 09:21:19 2014
Process (ospid 16280) is suspended due to the transition to a physical relief operation.
My Nov 10 09:22:04 2014
RSM0, PID = 16280 process, will be killed
My Nov 10 09:22:05 2014
RSM0 started with pid = 27, OS id = 10528
My Nov 10 09:25:39 2014
(Ospid 10528) process is suspended due to the transition to a physical relief operation.
My Nov 10 09:26:03 2014
minact-RCS: received the error during the scan e:12751 usn:6 useg
minact-SNA: useg scan slip on with error e:12751
My Nov 10 09:26:24 2014
RSM0, PID = 10528 process, will be killed
My Nov 10 09:26:25 2014
RSM0 started with pid = 27, OS id = 15752
My Nov 10 09:29:59 2014
Process (ospid 15752) is suspended due to the transition to a physical relief operation.
My Nov 10 09:30:44 2014
RSM0, PID = 15752 process, will be killed
My Nov 10 09:30:45 2014
RSM0 started with pid = 27, OS id = 1972
My Nov 10 09:31:09 2014
minact-RCS: received the error during the scan e:12751 usn:6 useg
minact-SNA: useg scan slip on with error e:12751
Suspend action 'Block Cleanout Optim, Undo Segment Scan' MMON 82800 seconds
My Nov 10 09:34:19 2014
Process (ospid, 1972) is suspended due to the transition to a physical relief operation.
alert-journal sleep shows the following:
My Nov 10 09:13:01, 2014
ARC3: Evaluating archive log 5 thread 1 sequence 12046
Involved the creation of the archivelog 'W:\SMART\ARC\SMART_12046_1_851952614.ARC '.
Archived journal 5932 extra for each sequence 1 12046 0xab72f94c dest ID thread entry 1:
My Nov 10 09:13:01, 2014
Media, recovery waiting for thread 1 sequence 12047
My Nov 10 09:13:04 2014
Again shipping customer logged in as PUBLIC
-User is valid
RFS [6]: assigned to the process 3648 RFS
RFS [6]: identified the type of database such as 'physical' standby: customer is ARCH pid 12320
My Nov 10 09:13:06 2014
Again shipping customer logged in as PUBLIC
-User is valid
RFS [7]: assigned to the process 9972 RFS
RFS [7]: identified the type of database such as 'physical' standby: Client is in the foreground pid 12244
RFS [7]: end-of-Redo for thread archiving 1 sequence 12047
RFS [7]: Eve successfully opened journal 5: "Y:\SMART\LOG2\SMART_S_5.LOG."
RFS [7]: Journal selected 5 for thread 1 sequence 12047 dbid-1425016497 branch of the 851952614
My Nov 10 09:13:06 2014
Arc1: Evaluating archive log 5 thread 1 sequence 12047
Involved the creation of the archivelog 'W:\SMART\ARC\SMART_12047_1_851952614.ARC '.
Archived journal 5933 extra for each sequence 1 12047 0xab72f94c dest ID thread entry 1:
My Nov 10 09:13:06 2014
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
MRP0: Background Media Recovery cancelled with status 16037
Errors in the D:\ORACLE\ORA_DBA\SMART\TRACE\diag\rdbms\smart_stb\smart\trace\smart_pr00_13804.trc file:
ORA-16037: user has requested the cancellation of the managed recovery
Managed Standby recovery not using real time applies
Recovery interrupted!
Errors in the D:\ORACLE\ORA_DBA\SMART\TRACE\diag\rdbms\smart_stb\smart\trace\smart_pr00_13804.trc file:
ORA-16037: user has requested the cancellation of the managed recovery
My Nov 10 09:13:07 2014
Errors in the D:\ORACLE\ORA_DBA\SMART\TRACE\diag\rdbms\smart_stb\smart\trace\smart_mrp0_11168.trc file:
ORA-10877: error reported in parallel recovery slave
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
Data not available for the digital switchover
End-of-REDO the archived log file was not found
Incomplete recovery SCN:0:35846057 archive SCN:0:35866066
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE THROUGH FINAL PASSAGE TO THE NODELAY
has started the process of logmerger
My Nov 10 09:13:07 2014
Managed Standby recovery not using real time applies
Parallel Media Recovery started with 8 slaves
Media W:\SMART\ARC\SMART_12047_1_851952614.ARC recovery log
Identified the SNA 0x0.22345d2 end-of-Redo (failover) for thread 1 sequence 12047
Activation reset sleep ID 2876438860 (0xab72f94c)
Met Media Recovery end Redo indicator
Media recovery applied through change 35866066
Attempt to limbo arscn 0:35866066 irscn 0:35866066
Completed: ALTER DATABASE RECOVER MANAGED STANDBY database through FINAL passage to THE NODELAY
ALTER DATABASE COMMIT TO SWITCHING TO THE MAIN WAITING WITH THE STOP OF THE SESSION
Waiting for the transition from role maximum is 15 minutes.
krsv_proc_kill: kill 2 process (all the RFS)
Backup controlfile written to find the D:\ORACLE\ORA_DBA\SMART\TRACE\diag\rdbms\smart_stb\smart\trace\smart_rsm0_14652.trc file
Passage to the after complete recovery through change 35866066
X:\SMART\LOG1\SMART_11.LOG online journal: thread 1 Group 1 had been previously authorized
Y:\SMART\LOG2\SMART_12.LOG online journal: thread 1 Group 1 had been previously authorized
X:\SMART\LOG1\SMART_21.LOG online journal: thread 1 group 2 was previously disabled
Y:\SMART\LOG2\SMART_22.LOG online journal: thread 1 group 2 was previously disabled
X:\SMART\LOG1\SMART_31.LOG online journal: thread 1 Group 3 has been previously authorized
Y:\SMART\LOG2\SMART_32.LOG online journal: thread 1 Group 3 has been previously authorized
X:\SMART\LOG1\SMART_41.LOG online journal: thread 1 Group 4 has been previously authorized
Y:\SMART\LOG2\SMART_42.LOG online journal: thread 1 Group 4 has been previously authorized
Standby became primary YVERT: 35866064
The digital switchover: completed - mounted as primary database
Completed: ALTER DATABASE COMMIT to SWITCHING to the MAIN WAITING WITH the STOP of the SESSION
My Nov 10 09:13:45 2014
Arc0: become the "no SRL" ARCH
My Nov 10 09:13:46 2014
ARC3: become the "no SRL" ARCH
My Nov 10 09:13:46 2014
Arc1: become the "no SRL" ARCH
My Nov 10 09:16:58 2014
NSV0 started with pid = 26, OS id = 15900
My Oct 10 09:21:20 2014
MICHAEL: NSV0 network call timeout. Kill it now.
The Setup is as follows:
DGMGRL > see the configuration;
Configuration - dg_smart
Protection mode: MaxPerformance
Databases:
Smart - primary database
smart_stb - physical of the standby database
Fast-Start Failover: DISABLED
The configuration status:
SUCCESS
DGMGRL > see the detailed chip database
-Smart database
Role: PRIMARY
State of destination: TRANSPORT-WE
Occurrence (s):
Smart
Properties:
DGConnectIdentifier = "smart_dg_prim".
ObserverConnectIdentifier = "
LogXptMode = "ASYNC".
DelayMins = '0'
Binding = "optional."
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = "300"
NetTimeout = "30"
RedoCompression = "DISABLE."
LogShipping = 'ON '.
PreferredApplyInstance = "
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO '.
StandbyFileManagement = 'AUTO '.
ArchiveLagTarget = "300"
LogArchiveMaxProcesses = "4"
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = "
LogFileNameConvert = "X:\SMART\LOG1, X:\SMART\LOG1, Y:\SMART\LOG2, Y:\SMART\LOG2.
FastStartFailoverTarget = "
InconsistentProperties = "(monitor).
InconsistentLogXptProps = "(monitor).
SendQEntries = "(monitor).
LogXptStatus = "(monitor).
RecvQEntries = "(monitor).
Nom_sid = "smart."
StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host02) (PORT = 1599)) (CONNECT_DATA = (SERVICE_NAME = smart_DGMGRL)(INSTANCE_NAME=smart) (SERVER = DEDICATED)))'
StandbyArchiveLocation = "W:\SMART\arc\".
AlternateLocation = "
LogArchiveTrace = '8191'
LogArchiveFormat = "smart_%s_%t_%r.arc".
TopWaitEvents = "(monitor).
State of the database:
SUCCESS
DGMGRL > see the detailed database smart_stb
Database - smart_stb
Role: STANDBY PHYSICS
State of destination: apply
Transport Lag: 0 seconds
Apply the Lag: 0 seconds
Real-time query: OFF
Occurrence (s):
Smart
Properties:
DGConnectIdentifier = "smart_dg_stb".
ObserverConnectIdentifier = "
LogXptMode = "ASYNC".
DelayMins = '0'
Binding = "optional."
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = "300"
NetTimeout = "30"
RedoCompression = "DISABLE."
LogShipping = 'ON '.
PreferredApplyInstance = "
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO '.
StandbyFileManagement = 'AUTO '.
ArchiveLagTarget = "300"
LogArchiveMaxProcesses = "4"
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = "
LogFileNameConvert = "X:\SMART\LOG1, X:\SMART\LOG1, Y:\SMART\LOG2, Y:\SMART\LOG2.
FastStartFailoverTarget = "
InconsistentProperties = "(monitor).
InconsistentLogXptProps = "(monitor).
SendQEntries = "(monitor).
LogXptStatus = "(monitor).
RecvQEntries = "(monitor).
Nom_sid = "smart."
StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host01) (PORT = 1599)) (CONNECT_DATA = (SERVICE_NAME = smart_stb_DGMGRL)(INSTANCE_NAME=smart) (SERVER = DEDICATED)))'
StandbyArchiveLocation = "W:\SMART\arc\".
AlternateLocation = "
LogArchiveTrace = '8191'
LogArchiveFormat = "smart_%s_%t_%r.arc".
TopWaitEvents = "(monitor).
State of the database:
SUCCESS
tnsnames.ora:
smart_dg_stb = (Description = (Address = (Protocol = TCP)(Host=host01) (port = 1599)) (CONNECT_DATA = (Server = Dedicated) (SID = Smart)))
smart_dg_prim = (Description = (Address = (Protocol = TCP)(Host=host02) (port = 1599)) (CONNECT_DATA = (Server = Dedicated) (SID = Smart)))
Primary listner.ora:
LISTENER_REDO_SMART =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1599))(HOST = host02))
)
)
SID_LIST_LISTENER_REDO_SMART =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\oracle\11.2.0)
(= Extproc PROGRAM)
(ENVS = "EXTPROC_DLLS=ONLY:D:\oracle\11.2.0\bin\oraclr11.dll")
)
(SID_DESC =
(SID_NAME = smart)
(ORACLE_HOME = D:\oracle\11.2.0)
)
(SID_DESC =
(SID_NAME = smart)
(GLOBAL_DBNAME = smart_DGMGRL)
(ORACLE_HOME = D:\oracle\11.2.0)
)
)
Listener.ora ensures
LISTENER_REDO_SMART =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1599))(HOST = host01))
)
)
SID_LIST_LISTENER_REDO_SMART =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\oracle\11.2.0)
(= Extproc PROGRAM)
(ENVS = "EXTPROC_DLLS=ONLY:D:\oracle\11.2.0\bin\oraclr11.dll")
)
(SID_DESC =
(SID_NAME = smart)
(ORACLE_HOME = D:\oracle\11.2.0)
)
(SID_DESC =
(SID_NAME = smart)
(GLOBAL_DBNAME = smart_stb_DGMGRL)
(ORACLE_HOME = D:\oracle\11.2.0)
)
)
LSNRCTL > status listener_redo_smart
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP (PORT = 1599))(HOST=host02)))
STATUS of the LISTENER
------------------------
Alias LISTENER_REDO_SMART
TNSLSNR for Windows 64-bit version: Version 11.2.0.3.0 - Production
Start date August 30, 2014 20:46:12
Uptime 10 days 13 h 11 min 15 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Listener parameter File D:\oracle\11.2.0\network\admin\listener.ora
Listener log file D:\oracle\diag\tnslsnr\host02\listener_redo_smart\alert\log.xml
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1599))(HOST=host02)))
Summary of services...
Service 'CLRExtProc' has 1 instance (s).
Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
Service 'HA_SMART' has 1 instance (s).
'Smart' instance, State LOAN, has 1 operation for this service...
'Smart' service has 2 occurrences.
'Smart' instance, status UNKNOWN, has 1 operation for this service...
'Smart' instance, State LOAN, has 1 operation for this service...
Service 'smart_DGB' has 1 instance (s).
'Smart' instance, State LOAN, has 1 operation for this service...
Service 'smart_DGMGRL' has 1 instance (s).
'Smart' instance, status UNKNOWN, has 1 operation for this service...
The command completed successfully
I would be most grateful if someone would have an idea of how solve it!
Thanks in advance and best regards...
Solved!
A logon trigger that makes an insert in a table for each log in the appearance of this behavior. Since dataguard brings the standby database open mode ReadOnly cannot insert the trigger and the strange behavior as described happens!
Hope that could help someone in the future...
Kind regards
-
Hello Experts,
We have configured Dataguard in our environment, now anxious as the broker. But we have some queries.
1. what happens if primary fails (failover or passage)?
2-if failover occurs, go back manually when the primary is available?
3-if Eve falls down, how would react broker?
4 - If the network goes down (for any reason) for some time, observer cant find primary and standby, how would he react then?
Please help me with your advice.
Thank you and best regards,
Vignacourt zerwali.
Hi David,
Let me put in a way if I understand your question. So, you have broker + observer configured in your environment. FSFO occurred which means your watch becomes primary and is running. Then after some main real-time is alive and what will be the observer will do here. ? right. ?,...
If my interpretation is correct, here is the answer,
(i) when the old primary remains alive, just bring up the State. The observer resets automatically (if its market) the database, bounce the old primary and synchronize with the new primary (i.e. your old database pending). But remember that your old primary will undergo sleep role yet...
After the process described above,
(II) If you want that your old primary again, we have to do a manual failover to get your old configuration.
Hope he would have deleted you. !!
Kind regards
Pradeep. V
-
Data Guard Broker fails with ORA-16635 and ORA-03135
Hi all
I configured Oracle RAC with 11.2 Dataguard on Windows 2003.
I have already configured standby without Data Guard Broker and everything works fine, but when I try to use Data Guard Broker, it cannot synchronize the files of the Data Guard Broker.
I tried everything, including MOS, but not found anything.
I get this error.
Primary
Sleep modeDG 2011-02-11-09:15:41 0 2 0 NSV1: (MIV = 57) Start sending metadata file: "+DG_DATA/orcl/dgbroker/dg_config_file1.dat" DG 2011-02-11-09:15:41 0 2 0 NSV1: Sending block #1 (containing MIV = 57), 67 blocks DG 2011-02-11-09:15:42 0 2 0 NSV1: Error sending block #1, size 67 blocks. Error is ORA-16635. DG 2011-02-11-09:15:42 0 2 0 NSV1: Current network link for metadata resync is broken. DG 2011-02-11-09:15:42 0 2 0 NSV1: (MIV = 57) End metadata file transmission: opcode CTL_ENABLE (1.1.1825138532) DG 2011-02-11-09:15:42 0 2 0 NSV1: Can't send CLOSE message to DRCX. Network error is: ORA-16635. DG 2011-02-11-09:15:42 0 2 0 NSV1: Error is ORA-03135 connection lost contact DG 2011-02-11-09:15:42 0 2 0 NSV1: Current network link for metadata resync is broken.
DG 2011-02-11-08:35:39 3001000 3 1825138419 for opcode = CTL_ENABLE, phase = RESYNCH, req_id = 1.1.1825138419 DG 2011-02-11-08:35:39 0 2 0 NSV2: Error sending block #1, size 67 blocks. Error is ORA-16635. DG 2011-02-11-08:35:39 0 2 0 NSV2: Current network link for metadata resync is broken. DG 2011-02-11-08:35:39 0 2 0 NSV2: (MIV = 11) End metadata file transmission: opcode CTL_ENABLE (1.1.1825138419) DG 2011-02-11-08:35:39 0 2 0 NSV2: Can't send CLOSE message to DRCX. Network error is: ORA-16635. DG 2011-02-11-08:35:39 0 2 0 NSV2: Current network link for metadata resync is broken. DG 2011-02-11-08:35:39 0 2 0 NSV2: Metadata Resync failed. Status = ORA-16635 DG 2011-02-11-08:35:39 3001000 3 1825138419 DMON: Database ORCLSTBY returned ORA-16635
Hello
CISCO firewalls have a configuration option 'inspect sqlnet' or 'deep packet inspection '. This setting can affect the transfer of certain data on the network and the result in malformed packets or down.
Check if this option is enabled, if it is turn off the option "inspect sqlnet" at the firewall level.
And try again...
Kind regards
Levi Pereira -
I just downloaded the latest updates of Java Version 7 update 25 build 1.7.0_25 - b16 and hell is loose with my FF.
Just a few examples are when I open the browser, it opens as a band full-width in the upper part of the screen and I have to drag down and reduce the size and instead of being able to start the browser in the bar of me seems to have all the tabs online when I click on the FF icon nothing opens.
All my previous tabs are no longer in the browser, but seem to be hidden. I disabled the 'Java' content in the "Java Panel" but nothing seems to work. I uninstalled and reinstalled FF (version 21) but nothing seems to have solved the problem - I need really your help in simple, easy to understand instructions for my beloved than FF back to a working state.
Well, I have the theme 'default' in the guise of cat. and under the cat just «click to Call Skype» Extensions
No one else in use.
So now, it would appear all is well and (fingers crossed), I have confidence he's going to stay that way - my grateful thanks for your time and your support once again, I appreciate it.
-
broke up with FF8 JavaScript bookmarklets
I have a couple of JavaScript bookmarklets that worked very well with FF7 and are now broken with FF8. Nothing has changed in the code. I run the script with the "Custom Buttons" extension. The script drives me to a digital channel and then add this string to a predefined URL. Here is a sample of the script "last known good configuration".
loadURI ("javascript: (function () {Tkt = document.getSelection ();)") If (!) TKT) {void (Tkt = prompt ("Ticket #',"))} if (Tkt) {z = open () .document;} ("({{z.location.href ='https://my.domain.com/ticket/'+ escape (Tkt)}}) ()");
Any ideas are greatly appreciated. I'm pretty confident that this isn't a problem with the script because it works very well for the months leading up to the recent update of FF8.
You are welcome
-
Call for email with attachment - broke up with 10.2?
The following used to work properly on 10.1, but on 10.2, the call fails.
attachedObjects: [ Invocation { id: emailQuery query { invokeActionId: "bb.action.SHARE" mimeType: "*" invokeTargetId: "sys.pim.uib.email.hybridcomposer" } onArmed: { trigger("bb.action.SHARE"); } } ] function shareFiles(s) { console.debug("file://" + s) emailQuery.query.uri = "file://" + s; emailQuery.query.updateQuery(); }
and returns to the console log.
file:///accounts/1000/shared/documents/mydatafile.csv InvocationWrapper::onQueryFinished: no matching result from Menu Service for query mimeType="*" uri=QUrl("file:///accounts/1000/shared/documents/mydatafile.csv") data= "" metadata= QMap() perimeter= 0 action= "bb.action.SHARE" target= "sys.pim.uib.email.hybridcomposer" invokerIncluded= false InvocationPrivate::onQueryResolved: no result matching query, no armed signal sent.
Any suggestions... Tried a different approach when searching for different thread related to the topic but so far no luck...
This is confirmed to not work in 10.2 (wire)
I had questions about the year 10.0 with her last and switch to a version of c ++ which is still working on the last update
* Assuming a context property is set in this example, it is RPC.
applicationUI.cpp
#include
#include #include using namespace bb::system; void ApplicationUI::email() { InvokeRequest request; request.setAction("bb.action.COMPOSE"); request.setMimeType("message/rfc822"); QVariantMap data; data["to"] = (QVariantList() << "[email protected]"); data["subject"] = "Message Title"; QVariantMap moreData; moreData["data"] = data; bool ok; request.setData(bb::PpsObject::encode(moreData, &ok)); InvokeManager manager; manager.invoke(request); }
applicationUI.hpp
namespace bb { namespace cascades { class Application; class LocaleHandler; } namespace system { class InvokeManager; } }
public: ApplicationUI(bb::cascades::Application *app); virtual ~ApplicationUI() { } Q_INVOKABLE void email();
. QML
Button { onClicked: { cpp.email(); } }
* I belive files may be attached, if you add in the table of data of QVariantMap, I think that should do the trick
data["attachment"] = "file:///path/to/my/item.txt";
-
Pairing with Motorola S9 Bluetooth broke up with the 1.2 update
Hi, I use my Motorola S9 bluetooth headset with my pre since the launch day and have had no problems until the 1.2 update. After the update would not connect the headset, so I deleted the profile of the pre and re-paired the headphones. The pre shows that it has been integrated and configure stereo music and hands-free profiles, but the helmet indicates that he did not associate (and does not). I tried several times and once did get the headset for listening to music of the pre, but after turning off the headset and turn then back on again once pairing has been again 'broken' (once again the Pre showed it was connected, a check mark next to Motorola S9 under bluetooth) (, but connection helmet light flashes 'blue' as its looking for a device to connect to).
Any suggestions?
JT
I think that I thought about it. The S9 can store the pairings for up to 8 devices. I think that what happens is he sees the Pre 1.2 as a different device and is not automatically connect to it, it is looking for the 1.1 unit (I guess right here). In order to connect the headphones, I need to press the play/pause button to re-establish the connection between the pre and the helmet. I've never had to do before, the S9 is supposed to automatically connect to the last device that was used, and I use with my pre, but at least now I can get them to connect by pressing the play/pause button.
JT
-
VMware-vSphere-Perl-SDK-5.5.0-1384587 broke up with perl 5.20
as the subject says, the vmware SDK is broken with perl 5.20.2.
The issue of possible priority with operator control in the /usr/share/perl/5.20/VMware/VICommon.pm 2147 line flow.
is there a solution?
The priority of the return order is not clear in VICommon.pm. No doubt 5.20.2 added this additional warning.
Not tested, but try to change the VICommon.pm 2146 line to:
return (meaning $user_agent-> cookie_jar and)
$user_agent->-> as_string cookie_jar don't ");
-
Photoshop Save as dialog modified - broke up with Acrobat update?
I use CS3 on an iMac 27 "quad core with 10.6.4. I try to save files small picture in a format particular BMP for the use of embedded systems - something I've done many times before.
However, the dialog box save as in Photoshop no longer give the usual set of options - instead I see only:
Photoshop
Cineon
DICOM
Large Document format
Photoshop PDF
Photoshop RAW
PNG
TIFF
The only thing that has changed is the Acrobat update which took place yesterday. File format options that were in Photoshop are more present.
Of course, we are under fire as a programmer is waiting for me send files BMP-all I can think to do is to install Photoshop on another system.
The other thing that has changed is your color image bit depth. Put it to 8 bits in the image menu.
-
Scale broke up with 11.0.07 policies updated
I use Adobe Acrobat XI and since the update of 11.0.07, scaling of fonts is broken. The menus allows the Windows setting for scaling of fonts. I have my the font size of 125%, while in previous versions, the menu fonts are 25% larger. Since the update, the fonts are always small. This problem seems to be caused by a new feature (bug?), called HD DPI where instead of match police Windows already, it will be 100%, which is my case is small or 200% which is obnoxiously large and nothing in between. Can this please be corrected in the next update?
Hi Gary,.
I posted a solution in this thread:
Please let me know if it works for you.
Thank you
Luke
-
iPhone5 switch ios6 to iphone6s ios9 problem
I am running ios6 on my iphone5 and backup with itunes OS x 10.6.8 11. I'm also moving to iphone6s but faced problems to complete from itunes OS x 10.6.8 11 is not compatible with iphone6s. Also, I plan not to update my mac to the latest version of the system due to several reasons.
I would like to ask is methods can I save my previous iphone5 to my new iphone6s? Using other computers or maybe last system mac and itunes can sync with ios6? Can anyone help?
FYI: 1. my iphone5 ios6 currently not working not properly. Once I click in it unexpectedly.
2 iphone5 ios6 can always synchronize with itunes OS x 10.6.8 11 correctly.
Thank you
My first thought was a backup to iCloud, but I think not iOS6 supports either.
Another suggestion is to go to an Apple Store near you and ask if they would be backup and restore your devices for you. If you explain your situation and maybe make a reservation at the Genius Bar first, they just might.
-
Toshiba UK - trouble with European warranty
Hi all
"I have a new Toshiba laptop with a valid European warranty, laptop broke down with a HW error on graphic card / display, so I contacted Toshiba UK request to fill the European warranty, the Envoy me ' some self called expert PC" which is the local expert refused to service my laptop and fulfill its contract with toshiba , but after that I refused to accept his totally ridiculous and likely completely illegal terms where there were literally pushing me to relinquish my rights guaranteed by law!
Above all what probably makes it on a large scale, is the worst that anyone should be well aware, is that they ask the complete product, i.e. including * hard drive with all your data and in the service contract you sign who can erase your data and that you agree on that *.
Transfer of real meaning when you buy toshiba products and it brokes down, you can either get free warranty service and possibly lose all your data or you will have to pay for the service by you own on product warranty... nice cheat!
So now... here's someone from toshiba, which will explain this or you simply delete this thread?
> So now... here's someone from toshiba, which will explain this or you simply delete this thread?
Hi buddy, for me, it looks like you aren't aware that it is a community of users.
I put t know why you think that the admin would remove this thread, but of course the post has not been deletedIn any case, its a shame that you were not satisfied with the service.
Generally if your warranty is valid, (Toshiba laptops, PC all-in-One, netbooks and tablets are covered at least 1 year standard warranty, valid from the date of purchase)
all hardware issues must be fixed in terms of warranty and of course free.Details on the warranty is available here:
http://www.Toshiba.EU/services/standard-warranty/ tab ' FAQ for Laptops»
I recommend that you check the points:
-What is covered by the Standard warranty?
-What is _not_ covered by the Standard warranty?
What should I back up my data?On this page you will find the database with all the access points that are available worldwide
http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/> Above all which is probably actually there on a large scale, is the worst that anyone should be well aware, is that they ask the full product, including hard drive with all your data and in the service contract you sign who can erase your data and that you agree on that.
To be honest, it is nothing unusual, and sounds like a common procedure.
The point is that the technician must recover the laptop using Toshiba Image factory (recovery disk) in order to set the camera back to the factory settings.
During the process of recover the drive HARD will be formatted and deleted data.So very important to backup the data before this procedure!
I think that this information and the details on the recovery media as well as the recovery process are in the user manual. So if you created the recovery disc in the past, you must back up the data before using the recovery disk.
-
Recover Windows XP Home with Microsoft XP CD
The OS XP Home Edition on a Toshiba Satelite laptop broke down with very important data. I try to recover the system with an original CD of XP Professional for sure the datas. During the process an administrator password is asked, but I don't know if it is the password of usual connection or something else.
Can you please tell me what password I need
or you know a better way to safety my datas important?Thank you!
Hello!
I think that a recovery with an original disc from Microsoft will not work.
However, there are other options how to back up your data.
You could start the laptop from a Linux live CD/DVD, and then you also have access to your data on the HARD drive. Now you can save it on an external drive or USB key.
Or you use an external HARD drive box you can put the HARD drive and save your data with another PC or laptop.Good bye
Maybe you are looking for
-
Google Drive, taking up the iPad storage
I installed the Google Drive app on my iPad and have noticed she was taking ~ 5 GB of storage iPads. I thought that all files stored in Google Drive were stored in the cloud. Does anyone know why Google Drive takes over this storage? Thank you.
-
Atrix: Failed to upgrade (Please read the original post before answering)
If you have snapped or changed your phone and you are on the Version of the system 4.1.26., 4.1.51 or 4.1.52 you can get an official version. Please see this post before responding: Post here if: You are currently on the Version(Menu > Settings > Abo
-
I am trying to upgrade my microsoft security essentials, and he says that it cannot find the epp.msi in this source: c:\4c2ab51fbfbc37e1b3cc2419c9\x86\ It is said to navigate and find the epp.msi, which I can't find anywhere else, and when I cancel t
-
I have not + icon in the Panel of DOM. I have to go somewhere to start?
-
I get this message when you download the trial Id
There is no application setto open URL aam://SAPCode=IDSN?version=11.0?actionList=CC-UI?passPhrase=k+8HvNPJAFBje8dvXunFH61kKfoF2 9hkInan3DWawzde2HPXSLbfzXO3Z + BhnchnCZJXOk + LSB + Sx / PDB/uLB8jUmNvEm8aZfnFOfj93hZf38wGYnu8KXtA IfLltcwpOj5ve1JBsOAh1/