EPrint code will not work

Similar Questions

• Access code will not work to reset iPad

  An employee who retires gave his iPad.  She gave me an access code and password to his iTunes account.  I have reset the password, and you want to "Erase content and settings."   I get the message that the password is incorrect.  I tried the old password and the new password.  What other password could reset search?

  I'd give him a call and see if she can help.

  She gave me an access code and password to his iTunes account.

  I think you want to enter his password to his iTunes account.

  -------------------

  You should have the employee go through this procedure before leaving.

  What to do before you sell or give away your iPhone, iPad or iPod touch

  http://support.Apple.com/kb/ht5661

  https://support.Apple.com/en-us/HT201351

• After a defective boot drive had to be replaced on my XP PRO, he asked me to activity and my active code will not work. indicates an invalid sound. I just replaced the hard drive

  I just had to REPLACE a HARD DISK broke ON MY WINDOWS XP PRO AND WHEN I REINSTALLED operating SYS ASKED FOR the activation CODE, THEN SAYS MY CODE WAS INVALID AND WONT turn ON. ANITA PHONE TALKED TO A COMPUTER AND NO HELP. I HAVE THE SAME PC. JUST REPLACED HARD DRIVE.  IN ANY CASE TO ACTIVATE. I BOUGHT THIS NUMBER OUT OF MICROSOFT FOR 145.  LARRY BLAKE

  Hi beenabean,

  Refer to the article below and try the mentioned step, check to see if it helps.

  You receive an error message after you enter the product key when you try to install Windows XP

  http://support.Microsoft.com/kb/310637

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer

  http://support.Microsoft.com/kb/312295

  How to find a phone number for a Microsoft Product Activation Center

  http://support.Microsoft.com/kb/950929

• upgrade activation code will not work on windows vista premium due to special circumstances. What should I do?

  I had vista OEM with laptop which hard drive has crashed, gateway does not support the system more, and I have no recovery disk.  I bought Vista premium edition and installed a new hard drive in the solid state, and it won't let me register the software because there is no software on the new drive and I do not have the OEM cd more.  I used my old XP install the first (that I replaced on another PC with win7) to try and it has not installed correctly on the solid state.  What I can do, I wouldn't buy a full version...

  You can use the double-install method to install Vista - * assuming * that you have an OEM license valid for XP or Vista on this machine.

  First install Vista using the default key (by penetrates not not in ANY key when you perform the installation), and then repeat the installation, this time using your upgrade key.

• Adobe CC Redemption Code will not work

  Hello

  I have a permit through my (included in my tuition) school student to use Adobe CC. Last year I installed it on my old laptop, no problem. Recently my old laptop to summer send me questions, and I got a new (Macbook Pro OSX Yosemite 10.10.4).

  This year, I was sent a link to Exchange my licence to student with a redemption code. Whenever I enter the code, I get the message ' Oops! This code has already been used. "I uninstalled and disconnected CC Adobe on my old laptop - so why is - what happens? How can I install CC on my new laptop computer? When I try to install the CC apps individually, the site wants to charge me - but I've already paid for it! Help!

  Thank you!

  Go to Adobe Creative Cloud

  Hello

  Please see redemption code help

  Kind regards

  Sheena

• Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

  Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

  I reinstalled my windows vista.made a clean install removed windows xp sp3 when I try to activate my windows vista Home Basic sp1 it say not validates the code supplied with the disc, the code is below my laptop and the cd is in the package with my laptop, I used the key once when I re-installed my operating system once and it worked perfectly

  If you get this message before you try to turn it on, it means generally that you must not read or wrong entered the key.

  Use a magnifying glass and a bright light to read the key (or ask someone else to read it for you)

  In particular check the characters B/8 and G/C/Q.

• Home surveillance camera kit, that will not work on Windows 7 OS. I have the following message: "DVR installation may not complete. Ox00000222 error code.

  I bought a home surveillance camera kit, that will not work on Windows 7 OS.

  I have the following message: "DVR installation may not complete. Ox00000222 error code.
  I really need to get this working on my computer. Can anyone help please?

  Contact the manufacturer of the camera to get their installed software.

• CD\DVD will not work. Vista Home premium, 64-bit. Message says: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I downloaded the drivers needed from the Dell site and the burner will not work. The computer was again in March 2009. Not sure where the drivers should be located. I downloaded on: win\syswow64\drivers\afc.sys. I've looked everywhere and tried to find a dialog box offering the option "update drivers" for this device. Could not find a way to do except Dell and that doesn't seem to work. The 64-bit system has no 'Device Manager' that I can find. When I look at the properties of the burner, the link to "find a solution" is not highlighted.

  Hello DanHenry,

  Try the miracle solution at this link: http://support.microsoft.com/kb/314060 but before you uninstall all third-party software (example: Nero, Roxio, iTunes). You can reinstall your software after you reboot your system. Please let us know if this helped you. Make it a great day!

  "In the end, the love you take, is equal to the Love You Make"

• The product code is more than a year and will not work. NOBODY HAS USED BEFORE.

  I bought lightroom 4 Amazon for more than a year. I waited until I got my new computer to install now my product code does not work. Adobe has made it impossible to get help. What should I do?

  Finally, someone to go for me and gave me a new code after verifying the old a.

• Backward compatible? Can I write software in 2015 SP1 and expect it to work well in 2013 SP1? What are the features will not work?

  I need to set up some labview on my current computer software and run it on another computer in another country in a month. I was told that the computer I will eventually run from abroad Labiew 2013 SP1. I don't have a Labview on my computer today and thought I would setup the same SP1 version ito 2013 compatibility. However, it seems that this is not an option. When I go to download products my options are 2012, 2012 SP1, SP1 for 2014, 2015 and 2015 SP1.

  So what's the best move here? Can I install 2015 SP1 and wait that everything works ok when I go abroad? I guess not. Why 2013 SP1 is not an option for me? Should I see if guys abroad can upgrade to the latest version? What happens if they can't?

  Thank you

  Trevor

  As others said, the best option is to get the same version. If for some reason you cannot really, I suggest you get an older version, because then you can write the code in a newer version and backsave, there are at least two issues that may bite you if you are not well aware of how they work:

  1. If you have used the new features, they will not work in the old code. What you get in fact depends on the specific feature you are using.
  2. When you backsave, I'm sure that LV is a hierarchy save, which means, if you have screws located in the external files that are not vi.lib, it will create copies and you might have a more difficult time sorting out the dependencies.

  This occurs if you are using an older version, because the most recent version will simply open it.

• My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session?

  My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get an error code?

  Follow the mentioned article:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Hope the above information is helpful.

• Windows update error 80070490 - other corrections code do not work.

  I have 9 updates, that I need to install it and I get the error code 80070490.

  I did the following to try to address everything with no luck...
  (1) tried a system restore. Unfortunately this update has been tried and failed several times during the last few days, and each time it is automatically a restore point. So now I have no more old that won to restore restore points.
  2.) have tried updating system as indicated here preparation tool:
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  Rebooted and still have the problem.
  2.) attempt to perform a repair with my Vista Ultimate DVD installation as described here:
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  The problem is that I can't choose 'upgrade '. It is grayed out. The reason for this is that I can't upgrade to a version older than what I'm running now. My DVD is SP1 and I have since upgraded to SP2. I keep seeing this recommendation and it will not work for me.
  (3.) I deleted the "Software Distribution" folder and reinstalled the WindowsUpdateAgent.
  4.), I tried to use the Mr FixIt. It does not find that there is a problem with the windows update and then it tries to fix it. It runs corrections and says that it has attached to them. But when I close and re - run, problems are found and 'fixed' again. I have been through multiple cycles of Mr FixIt, restart, update, error, fixit, etc.. I also tried the fixit several times back to back running. Whenever he finds the problem, says it is fixed, but then when re-ran he finds the problem, said again and again this is corrected.
  This all started after uninstalling several pieces of software by using the control panel. I emptied several unused programs and uninstalled AVG Antivirus. Not sure if this is related or not, since that was a few days after uninstalling before I saw for the first time this error.
  I'm still having the problem.
  If you could point me kindly to specific files that need to be extracted for this error I would really appreciate it.

  I managed to solve this problem on my own. It turned out to be something with the above Japanese language pack. I uninstalled it and everything updated correctly. I thought I'd pass just in case someone else has the same problem.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• my sidebar is displayed, but will not work. Defender won't come out, can not run safety programs

  My computer seemed a crash with sidebar, adobe Flash Player and security problems.  I can't get out to run and run.  They go out and disappear quickly.

  Sidebar will appear in the selection, but will not work.  Defender will appear just saying quickly extinguished.  Windows Security Essentials appears and extinguishes FST

  saying not up to date and will not be open for the scan.  Adobe said no uo to the latest version of flashplayer.  All it seems to be stuck and not come out.  Internet work

  fine and so email.

  Hi mgm842,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  You can try to run a scan online and check.

  Step 1:

  You can check out the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Check out the link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2:

  If you are still facing problems then try creating a new user account and check if the problem occurs:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in the new user, then check out the following link to fix a corrupted user account.

  Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

• black screen and nice white cursor and Ctrl alt del will not work, I can not update shell

  black screen and nice white cursor and Ctrl alt del will not work, I can change the shell to the Explorer, but I can't unload or load the hive, what should I do?

  Hello

  Your question I know that some of these methods is not available now, however, all
  Convenience store is included just in case where win you some access as you try to solve the problem.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.