EqualLogic PS4100 with a red light.

Similar Questions

• DC5000mt Office still 5 beeps with 5 red lights after a repair?

  I have a desktop DC5000MT that worked very well. Then clean the dust that was in it.  Now, all this now is beeps 5 times with 5 red lights.   Could this be the motherboard?

  Plud 1. hard drive out, 2. DVD rom drive, 3. drive out, 4. even memory and updates different memory which is not my computer 5.  last thing has not changed the power supply, no chance.

  Hello:

  5 beeps indicate a memory error.

  I could test a stick at a time and see if you can get the PC to boot.

  If you test all memory and you still get 5 beeps, the motherboard is probably shot.

• IX2 - DL does not start after the firmware update and now in boot loop contant with double red lights

  I just applied the update to the latest firmware 4.1.208.33789 for my IX2 - DL and it took an extremely long time to reboot - flashing white light for 20 min on the right.

  Shooting and by unplugging power did the same result.

  I hold the reset button hardware pin and now he's in a boot loop throw up double red lights and then attempt to restart with flashing blue white and strong.

  Help! don't know what to do next.

  Hello steveappcity,

  I recommend a support incident, opening the only way I can support an imager is if she is officially released:
  https://Lenovo-na-en.custhelp.com/app/ask/

• Printer print more slowly and with flashing RED light

  I have a HP p6616f desktop runing Windows 7 Home premium OS. Recently, the receptors afer a system restore, my Samsung ML-2510 prnter slowed donw and a flight of red warning to the pririnetr kept blinking as soon as the power is turned on on the printer. When I right click on the printer and open the prinetr properties, there is just no indication of what has been and then there were two unknown debices stood Windows 7 could not find a driver for. I ran troubleshooting printer ly repeated my PC or through MR. FIXIT at your solution Center. Each time, he tell me no problem could be found. When I ran troubleshooting configures a device, everytme, e PC tried to install a driver but did not, was his attempt to insstall an update of the driver. And the "hardware and peripheral fault reports said: problems detected: unknown device doen't have a driver." And under "Device information", it listed ID; ROOT\LEGACY_REGFILTER\0000 and the error code: 28. All other devices I connected to his PC an addition to the standard items provided by HP are: a model AC-1 microphone, an external hard drive Verbatim, a tablet of PENPalJR entry, a video camera with build - in speaker and an all-in-one Dell Photo 926 printer an addition to the Samsung ML-2510. Explains a lot, except for the two unknown devices. I know that my ATI graphics card driver is not the most, because AMD has revised its pilot of almost every month, and the manual uninstall the old version and reinstall procedures of the new pilot is so heavy. I have the try once. I HAV eno way to check if the th etwo unknown devices are related to the ATI? AMD graphic card or not. That's why I dare not Unstall them so far.

  It would be appreciated MUHC if you could help me solve these two puzzles. Thank you.

  Kam

  Hello

  Method 1 : 28 error code occurs when the printer driver is not installed. Install the printer drivers.

  http://www.Samsung.com/us/support/downloads/ml-2510

  Method 2 : check the following article.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope that helps.

• Why CS6 turning headlights and other sources with plain red light?

  I am a railroad photographer and I came the other night of an exit from the House and began editing photos. However, I couldn't use an any of them, because of the CS6, turning the train lights in clear red spots. It worked perfectly as a few days before. No parameters have been adjusted at all, and does so for all RAW photos on my computer, including those I have already edited by Adobe RAW.

  It looks like this:

  http://i.imgur.com/fgRhjBE.jpg

  Any help would be appreciated.

  It is the indicator of cliping of climax. Click on the small triangle at the top right of the histogram to turn it off.

• USB HDD TRAY 1, 5 t: = red light drive lights works very slowly

  Hello

  It is brand new USB STORE 1, 5 t 3.5 "disk.

  Drive normally begins with the red light, initialize and move to blue light. Initially drive works slow - flashing blue when something happens.

  ... but after a few minutes of use, red light may turn on a moment (for e.g. when new folder is created or some files are copied - then drive works very slowly - it appears when you copy).

  After a few seconds, record going to the blue back light - and everything is OK until the switch next to the red.

  1 is this normal behavior?
  2. What is the meaning of red light when the drive is working?

  Thank you in advance.

  Hello

  I m no owner of this HARD but I have a theory.
  According to your information, I think that the red light only appears if data would be written to the HARD disk.
  The blue light appears during the reading of data from the HARD drive.

  Welcome them

• HP Pavilion H8 - 1160t Strip annoying red light on front panel, how to disable?

  I bought a new HP Pavilion H8 - 1160t with this red light strip boring on the front panel.  How can I disable this light permanently? Thanks in advance.

  Follow the steps in thislink to remove the front cover and power button/light. Skip step 6 (detach the power switch on the motherboard connector) and focus on step 7 (connector to detach the LED on the motherboard). skip the remaining steps. Reinstall all parts except the LED Strip by reversing the above steps. That should do it.

  Frank

• Get a TINT of RED LIGHTING on some footage in Premiere Pro

  Perhaps this should be done in After Effects, but I'm not sure.

  We did a reshoot and the DP, well, he wasn't sure of him and any shot that day seems far from way. terrible. But it should be used. No other choice. Time is up.

  It's a scene in a club like setting, in a corner, so I would just give it a tinge of rent and make it an artistic choice. Heavy red lighting. No matter what.

  But the thing is very orange and my experience with the way thre color correction does not work well. I can't get anything even remotely.

  Here are two images... One of a scene with a red light at the top. Natural, red, you mind. And then below the color very slightly fixed scene in all its orange horiibleness. Brute!

  Should I go in After Effects for this? That would be new territory, for sure.

  My deadline is the next Tuesday night. I say sort it.

  Any advice is welcome. I've been on it since yesterday, without success.

  

  Here is an example of the extreme red lighting. It would be nice for me...

  

  Try RGB and RGB correction curves.  Selectively adjust the red, anywhere along the curve of luminance.  As a result, you can adjust the midtones and the shadows.  Then in RGB corrector, bring up the gain and reduce the gamma.

  Bothe are accelerated effects.

  

• HP Z620 workstation: HP Z620 Workstation - WS displays video & Fans Spin loudly or fails - red light with 8 beeps

  Hello
  
  I have a HP Z620 workstation.

  My processor is an Intel Xeon E5-2660 SR0KK 2.2 GHZ 20 MB 8 GT/s LGA 2011 8 - Core CPU.  More correctly, it's a category of Xeon E5-26xx (dual processor), 8 cores, frequency 2.2 GHz, turbo 5/5/6/6/7/7/8/8, 8 × 256 KB L3 cache 20 MB L2 cache, 95 W TDP, Socket LGA 2011, i/o bus 2 × 8.0 GT/s QPI, × 4 memory DDR3-1600, release date 6 March 2012, CM8062107184801 part number.  This is version 1, not version 2, which is good because the card in my system startup block date 20/12/2011.

  I am using Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Server Memory.   (J'ai également essayer écarter un problème de mémoire utilisé FUREUR de Kingston HyperX 8 GB Kit (2x4Go) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8)) as well as herself, to see if that makes a difference.)

  I don't know how to identify my system board other than the one she reads only numbers as "FMB-1102" and "PBLNV0GCY4N0TF" and "such as #618264-001 REV 0 G'.  He has "hp (copyright symbol) 2012 ' and"E93839"and"FXN1"written on it as well.  (After some searching I guess it's card mother 618264-001.  Which differ a card system like 619559-001 - a model later?)
  
  My graphics card is a XFX R7 240 780 MHz 4 GB DDR3 HDMI DVI VGA graphics card.  (I also try out a video card problem used an EVGA Nvidia GeForce GT 620 1 GB DDR3 SDRAM PCI Express 2.0 x 16 video card to see if it would make a difference.)
  
  Regarding the power supply, the power supply standard HP Z620 computer PC 800W Power Supply S10-800P1A 623194-002 717019-001.  (I have more than one and who have tried also.)

  With respect to the hard drive, I have formatted and reused a WD Blue 500 GB Desktop hard drive - 7200 RPM SATA 6 Gb / s, 16 MB Cache 3.5 inches - WD5000AAKX.

  My problem:

  1 regardless of what video card I use, if I use the FURY of Kingston HyperX 8 GB Kit (2x4gb) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8) memory and starts, I get a blue light, no beeps, no code of message I can say.  However, no tension of the video card (fans not spin) and no power is supplied to the drive hard (do not load and run).  I get a blank screen and can see nothing.  Back fans begin to turn in very strong and turbo mode.

  2 regardless of what video card I use, if I use the Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Memory Server, I get a red light and eight beeps which means a kind of ROM BIOS/CMOS-problem problem problem.  To this end, I tried pressing the button Clear CMOS without result.  I removed the CMOS battery for a sufficient period of time and again.  Nothing changes this situation.  It only happens when I put this special memory in the computer.  If I stick a USB Thumb Drive with file BIOS (BIN) in it which is 3. XX or higher, it will boot to the BIOS on a limited basis.  I also had to understand that I couldn't do anything with a USB keyboard, I could only select options using a PS/2 keyboard - maybe it crashes on some USB devices at this point?

  3. I understand that if I let the rider of recovery from crisis on the 2nd and 3rd pins rather than pins 1 and 2, that it will load from a backup and I can actually do things.   On this basis, I was able to install Windows 10 education 64-bit and a host of programs and otherwise, use the computer normally.  But I can't start unless I have keep that crisis rider of recovery set to pins 2 and 3 and so he can start in the operating system normally by pressing F1.

  4. I while on Windows, updated the BIOS to the latest version, HP Z420/Z620 Workstations system BIOS 3.90 Rev.A (August 8, 2016) using sp77058.exe (19 MB).  I've also updated other drivers as I could with the HP SoftPaq Download Manager (SDM).  None of this changes the problem at initial boot upward.  At the start he complains front chassis fan does not turn, but this is not a problem I have printing allows to stop a boot to the top, it would give just a warning and still boot normally.

  Well my computer works and does that as long as I keep this crisis recovery jumper on.  But I feel that I should be able to solve the problem and he can begin without interference and without resorting to a measure as drastic.  Suggestions anyone?

  Thanks in advance for your time.

  MR. J.

  Juggerknight,

  Keep the rider of recovery of block starting on pins 2 and 3 of E15.  It's 'off' because the 3 pin is not connected.  Put the jumper to pins 2 to 3 "parks" the rider.  Put the jumper on pins 1-2 active boot block recovery mode, and the system does not start with the jumper in this position 'on '.  (You have already discovered this)

  In addition, do not mix unbuffered and registered in the same system memory.  Use either one or the other.

• end of 2013 Mac Pro self begins with red light under DIMM 3

  My end of 2013 "trash" Mac Pro has an intermittent problem on start up - this can take up to 8 auto restarts before it starts to fully operational status. During these reboots red lights are visible through the base, in the area of the 3 & 4 DIMM slots. This happens in about 3-4 times when the Mac Pro is started first thing in the morning. Sometimes - but rarely - it will also restart after a period of normal operation.

  Run diagnostics and, before one of the operations described below, this indicates that all was well but the 2 just many times where I ran diagnosis, he pointed out that no WiFi interface has been installed. Have also run Memtest that since several days of testing, running as a single user with multiple passes, says memory all OK.

  Have tried resetting the SMC both NVRAM and update of the OS. Removed and reinstall the RAM modules. After the reinstallation of modules, first start only registered DIMM 1 & 2 modules. There seems to be no problem with the seating, nothing loose or place and taken liberation were entirely home. Next and all subsequent boots saved all 4 modules.

  A day of immediate bootups without problem but then, first thing this morning, had two cottages restarts during startup. I gave the 2nd boot press / press and hold the 'on' then booted diagnosis - no problem not indicated. On the startup resulting, everything was fine.

  I guess the problem is in, either the GPU or with 3 & 4 DIMM slots. Can someone tell me the meaning of red lights? Diagnosis would be easier if I knew.

  MacPro6, 1 (end of 2013)

  3.5 GHz 6-Core Intel Xeon E5

  16 GB 1866 MHz DDR3 ECC

  AMD over-pants D500 3072 MB

  10.10.5 OS

  Hello Bob,

  Thank you for using communities of Apple Support.

  I see that you have found a red flashing in the 3 & 4 DIMM slots. Typically, this indicates a bad RAM module or the module is not seated properly. I see you have already done the troubleshooting that I would have recommended. So, unless you have third-party RAM installed in your Mac Pro, I suggest you take a look at the following link to access the service options for your computer.

  Answer - Mac desktop computers service center

  Happy holidays.

• Smartphones blackBerry 8320 death with a flashing red light

  I had my 8320 for 5 months now... everything was fine until today.  I got a white screen with a hourglass... so I removed the battery and put it again after 30 seconds.  Then 'bam' nothing... no screen at all... just a flashing red light.  I came home and plugged in the charger, thinking that would solve it. Maybe the battery was dead, but he charged for six hours and then I got a green light, but no screen.  Help!

  Hi and welcome to the forums!

  If you have only had the phone for 5 months, you should be able to take back and get a new phone.

  I hope you made a backup and you can restore your data. If you are unable to return it, you will need to reload the operating system of the device.

  In my opinion if it can you should resume.

  You want to try to return or to load the operating system?

  Please let me know.

  Thank you

• keep the red light of the research of e-mail messages

  Just red light will not stop looking for e-mail messages, despite the fact, I set the preferences to search E-MAIL when I'm trying to find something on my Mac. What is happening with this?

  MacbookPro, mid2010,

  with the help of el Capitan (but in fact, this has been a problem in previous versions as well and I'm just fed up with it once again)

  don't know why she filled in saying I'm on the Mavericks. have updated to El Capitan

• Toshiba USB external hard drive 250GB shows only the red light - sound of rattling

  My USB HD external drive to Toshiba aged 16 months stopped working yesterday. It shows just a flashing red light
  and makes a slight clicking noise. Of course, we cannot guarantee any more. But all my backups are on this drive,
  This means almost 10 years of work destroyed if I cannot access this disc more. Someone knows what to do to fix
  This problem?

  Post edited by: admin

  I put t know what the flashing red LED could mean, but it looks like a HARD disk head crash. Perhaps you could find some details in the user manual that the flashing light means.

  However, he still stupid s cases of dysfunction of a backup media situation. I had a similar problem with my 2.5 100 GB USB HDD. After about 3 years of work, the HARD drive died and I was not able to access the HARD disk. I was a lucky man because I have backup my data also on the DVD so I was able to restore the files and data.

  What to say maybe s possible to save data, but professional help would be necessary. Maybe you should contact technicians for assistance.

  Best regards and good luck buddy

• 250GB USB external HARD drive - red light then flashing blue

  Hi all

  I have a Toshiba 250 GB external USB HARD drive which has just stopped working. It has a red light with a steady blue light flashing.
  I can't access the HARD drive in my computer.

  Any ideas?

  Help much appreciated!
  Whiley

  No do you have ideas on this?

  If this isn't the case, someone at - it ideas where I can get the drivers for this device?

• Small flash a red light in my helmet?

  So I just pulled out my headphones and a small light flashed right after that I got him out. I did some research and those who have the light thus had problems with the audio, but my speakers and audio seem to work very well. What is the problem with my laptop? Would it because I use my headphones too often? And this is something I should be worried?

  The red light indicates that he was in "Digital output" mode If audio works as expected, it seems to be only a momentary problem and nothing to worry about.