Equium A100-147 and RAM update

Similar Questions

• Equium A100-147 tried to update BIOS, now won't start

  I was updating the BIOS on my laptop and now it won't start, the screen stay black and I just hear three beep. A long-term follow-up of two short.

  Any help would be appreciated,
  Thank you.

  > I was updating the BIOS on my laptop and now it does not start

  It seems that the update of the bios that went bad and had to be reflashed. Bios recovery is a delicate procedure and you should contact the service center:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• Equium A100-147 - including modules of RAM to upgrade?

  Hello

  I think to upgrade the RAM on my Equium A100-147 and I was wondering what kind of RAM I should get and what is the maximum amount of RAM supported?

  It has a processor clocked at 1.6 GHz centrino duo t2050 if that's any help? I looked on the toshiba site and they sell only 1 GB of supported modules, but in other places I've seen people say that it can take more?

  Thank you

  Hi mate,

  The maximum RAM capacity depends on your chipset you have. From Toshiba Web site displays a maximum capacity of 4 GB of RAM, but don t forget, you need an OS to use the full capacity of 64-bit. Otherwise, you are only able to use about 3 GB.

  You can buy all the modules you want to, but I made good experiences with the Kingston modules. Kingston memory research shows the compatible modules for your laptop:
  [Search results for: Toshiba Equium A100-147: http://www.ec.kingston.com/ecom/configurator_new/modelsinfo.asp?SysID=35677&mfr=Toshiba&model=Equiu m + A100 & search_type = & root = uk & LinkBack = http % 3A % 2F % www.kingston.com%2Fukroot&Sys=35677-Toshiba-Equium+A100-147&distributor=0&submit1=Search 2F]

• Upgrade of RAM Equium A100-147

  Hi, I have an Equium A100-147 with the standard of 1 GB of RAM (512 MB + 512 MB pc-4200) professional XP.

  I'd like to update, and I was wondering if it would be allowed to replace one of the 512 MB sticks with a single stick of 2 GB pc-5300. RAM would be then 2 GB pc-5300 plus 512 MB pc-4200 = 2.5 GB in total.

  Or would it be better to buy 2 x 1 GB sticks of pc-5300 and sell or discard existing memory?

  I see a significant speed increase over the existing configuration of the Ram?

  All advice appreciated.

  Thank you.

  I agree with Akuma, it would be better to use 2 x 1 GB modules.

  This combination with 2 GB and 512 MB with different (PC4200 and PC5300) specifications could make problems like freezing, BSOD, etc..

  At present, the price of memory is very cheap, so I think that this should not be a problem.

• Impossible to update the setting of DVD region on Equium A100-147

  Hi I have an Equium A100-147 with a CARPET * a DVD-RAM UJ - 841S and I am returning the dvd region 2 region.
  Tried to go through Win DVD, media player and the Manager of devices but not successful on all occasions.

  Whenever I thought I left a change of reference, but when I say yes I want to make the change, that is not the case.
  I tells me that I must use a region 2 media (do) and the administrator (this is me - I'm the only user).

  I now regret letting my nephew use the laptop for watching a region 1 dvd.
  Am not longer under warranty but have whateverhappens coverage of curries.

  Help, please!

  If you check the properties of ODD under DVD Region changes remaining how is noticed?

• Equium A100-147: record now and Roxio can't find Recorder

  Equium A100-147 with Sonic, 'Save now' 7 worm, using gives 'NO recorder' and can not find the drive. If no records. I checked the box 'Save' in the properties for the drive but no joy. Also I tried Roxio software but it was also unable to find the drive.

  All of the suggestions.
  See you soon.

  Please check in Device Manager if the cd/dvd drive is correctly recognized.
  Additional if you can find the drive in the Device Manager, you could try to remove it and restart the laptop.
  After restarting the laptop should recognize the device again.
  Then you should check the functionality of the drive.

  I studied a bit on the site of Microsoft for similar problems and found a few interesting sites:
  http://support.Microsoft.com/kb/320553
  http://support.Microsoft.com/kb/314060/

  In my opinion, some registry entries are corrupted.

• Equium A100-147-glitch-pop-crack if the sound is muted

  Hello.

  I have an Equium A100-147 with Vista home Premium SP1 and 1 GB of RAM.

  Recently I get a glitch-pop-crack from time to time even if the audio output is cut.
  Have no idea what could be the cause?
  I'm more or less certain that everything is up-to-date.

  Thanks in advance.

  I never heard a question also and now I can t say what's the reason for this. :(

  You have the same problem on external speakers?
  What operating system do you use?

  Perhaps you need to update the audio driver you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck

• Equium A100-147 - where to find the ethernet LAN driver

  Hi all

  I have problems to find the dirver for my ethernet controller...
  I went to the toshiba Web site and on the LAN driver is not finished, he does that with any application to uninstall, doesn't have to install, missing problably...
  I could find on the web...

  I managed to install the wirelles, so I can use the net over there... but I want to install the LAN as well...

  Anyone know where I can find driver (ethernet LAN) Equium A100-147? *

  Thank you very much...

  Hello!

  Have you tried to update the BIOS?
  Check the Toshiba site for a newer version of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Equium A100-147: can not play games becauce slow DVD player

  Hello

  I have a laptop Equium A100-147. I tried many games on my laptop which should conform to the specifications required for example battlefield 2, however, these games does not work and I didn't know why. I then realized that all the games I tried were all on 4 DVD-ROM drive demanding x, and the specifications I provided with my laptop did not specify what kind of DVD player, I had another super multi layer or something.

  It is while I tried the games that were demanding CD-ROM which all worked fine, I then tried a game that was 2 x DVD ROM demanding that worked apart from a small problem with models of characters not displayed, so I took back defective. Then I tried a 1 x DVD-ROM game that worked perfectly.

  Today, I decided to get my DVD specifications, where I found that my laptop should read 8 x DVD - ROM drives.
  So my question is, is my defective DVD player for not playing more than 1 x DVD - ROM games? And can I contact Toshiba or my provider for repair or replacement or my problem would be something else?

  Thank you, Josh

  Hello

  As far as I know the laptop was delivered with the drive UJ - 841S and the drive supports 8 x DVD-ROM.
  Of course, there must be something wrong if the drive cannot read DVD-ROM media at full speed. The middle is not supported or the drive malfunctions

  What you can do is search for the update of the firmware. Many laptops come with the same drive. See the categories of driver and, possibly, there is a new update of the firmware.

  You can also try to remove the physical drive from the laptop and reboot the device without the drive. Then turn off the appliance, install the drive again and the boot upward.
  The laptop must initialize the firmware again and maybe this will help

  But it seems you notebook is not very old and the warranty is valid. If you need to contact the ASP in your country for more details and possibly for disc replacement

• Equium A100-147: cannot install Vista because of startup configuration problem

  Equium A100-147 (Windows MCE) bought compatible Vista and bought my promised copy of Vista... used Toshiba step by step DVD ROM upgrade and also updated the Bios.

  Tried to load Vista Home Premium and after going through all the steps, it came with this message...
  «Could not update the computer startup configuration - installation cannot go ahead «...»»

  How should I proceed and what is useful to load Vista.
  Thanks in advance for any help.
  Considers that Howard.

  Hello

  How have you tried to install vista on the laptop?
  Have you tried to switch the MCE to Vista or were you running the new clean install of Vista?

  In my opinion, you must perform a clean installation. Don t updated the existing MCE of Vista.
  In such cases, you can join different installation problems

  If you are an owner of an original MS windows XP CD try to run the console of your windows XP CD recovery.
  Demarrer start from the CD at startup, and then press R to access the recovery console after loading the driver.

  In the recovery console, typefixbootand then restart your laptop.
  Then insert your Vista installation and restart.

  This should solve your problem.

• Equium A100-147 would not start

  Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

  Help, please.

  Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

  What happens when you do this?

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Equium A100-147: need a new disc of restoration as mine has been a scratch

  Having a little trouble with my Equium a100-147.
  Tried a recovery from disk and I got up to 75% and recovery stopped.
  Taken to a computer shop to get it fixed and they couldn't do anything because they do not have a disc of recovery in good condition.

  Is there anywhere I can download the image to a different computer, put it on a dvd and restart from that one?

  Contact the ASP in your country and order the necessary CD

  Here you can find near the ASP in your country
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Equium A100-147 replacement hard drive

  Hello

  I got a toshiba Equium A100-147 by a friend. The only problem is that it comes without a hard drive, because he still destroyed his old hdd to protect its personal and professional data.

  I saw in a local computer store a disk sata hard very good price for only? Â £38 it's a 160 GB w Digital Scorpio 5400 RPM 8 MB Cache S - ATA HDD laptop someone knows if it will work or this laptop does it work-specific hdd?

  Looking forward to any help you guys can give

  Hello

  Of course you need a compatible HARD drive.
  There are two different standards of HARD drive. SATA and IDE

  You need the HARD drive with the SATA interface. I think the original HARD drive was 100 GB.
  So a 120 GB and maybe a 160 GB SATA HDD should also be compatible.

  As far as I know the HARD drive slot was placed at the bottom of the unit and a screw secures the plastic cover.
  It of really not difficult to replace the HARD drive and I think that the details could be found in the user manual.

  Good bye

• Cannot install driver Equium A100 - 147 LAN (ethernet)

  Hello

  I have the same problem, as in the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17316 section.

  I downloaded and installed all the drivers that I needed on my Equium A100-147, but not working no driver Lan (ethernet).

  I have windows XP, home edition, SP2.

  I tried both types of drivers Toshiba download (and a few others also), that should work... but unfortunately, it does not.

  I'd be happy if someone could help me. Thanks anyway.

  Adam.

  Hello Adam

  Thanks for the feed back, but I must say that I'm really confused why you have problem to facilities with driver on Toshiba download page. In any case, the problem is solved and that's the most important thing! ;)