Equium A100-306: Vista does not read MMC cards - MMC1 device has no drivers

Similar Questions

• Satellite U200-165: card reader do not read MMC cards but SD reading card

  Computer laptop Satellite U200-165, Win XP home,
  I got in 2006, while it wasn't any problem with my mmc cards.
  Yesterday installed Windows XP pro, installed the drivers: driver media flash and SD Secure module and card readers do not read MMC cards

  Help, please!

  Hello

  What exactly do you mean by MMC card doesn t work?
  What is the status of card reader in Device Manager?

  I checked the user manual (which can be downloaded from the Toshiba page) and it tells the MMC cards are certainly supported.
  I think it must be a software problem.

  In your case I recommend to update the Win XP for the last State and reinstall the Flash Media Driver and SD Secure Module again

• DVD - RAM on my Equium A100 (PSAAQE) drive does not recognize CD - R discs

  I just installed XP Pro on my tosh equium a100 provided vista as it ran very slowly and I had endless problems.

  All works well outside the DVD RAM drive, I got the correct driver from the toshiba support site and works in deivice managing all the and correct, I installed nero and decided to burn a Music Office but nothing helps, after selecting tracks nero don't does not reckognize the player in the drop down list only CREATE ONE IMAGE was available?

  Can someone advise?

  Thanks in advance

  I should try the following steps:

  First, you must remove the drive from the Device Manager and restart the laptop. After you restart the operating system should recognize the new device (ODD) again.

  Then, open the registry and delete the upper and lower filters of the key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then reboot again.

  Once these procedures please try again if the player works!

• Windows Vista does not read all my cd or dvd

  I want to upgrade to windows 7 from Vista, but my CD/DVD drive does not read it. The same thing is happening with other cd and dvd. Suggestions anyone?

  In Device Manager, remove the cd/dvd drive, restart, maybe that helps

• Vista does not recognize video card

  I recently moved, and after I put my computer my monitor is not a signal. I plugged my monitor on the main port and it came. My computer does not recognize the card in the Device Manager. I opened it and inspected the map for all the Visual problems and plugged it upward and noticed that the fan on the graphics card not working. I then did a full restore of the system, reinstalled the installation CD supplied with the card after you disable the onboard and restarted my computer. Still does not recognize the card and after restarting it on my integrated card. Then, I went into the BIOS and selected PCI-E as my first. So... im out of ideas here, if the fan is still ongoing is not the card still work? I don't have another office to plug it in. Is there another way to know if the card works? Why it can't recognize the graphics card which was working fine before the move? On a side note, the computer was unplugged for 2 weeks during this time, but I don't know why this could be a problem.

  IM using Vista 32 bit.

  Hi Myriam.
  Thank you for visiting the Microsoft Answers forum
  If the fan on the card does not is an indicator that the card is not powered, so the only way to test it is to plug it into another machine to see if the motherboard is not giving power or is the card that is bad. You can also try to plug a PCI-E device and see if it has power.

  You have all the cables connected directly from the power supply to the graphics card?

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Help! After update LR to the latest version (2015.4), now it does not read my cards

  I've just updated my LR to the latest version. Now, it does not read my files. I tried different cards on different devices, and none of them can be read by LR! Help!

  It turns out I had to right-click on the LR icon and then select "Run as Administrator". That solved the issue!

• My SD/MMC slot does not read the card

  The laptop makes a sound (as when you connect a device), but not autoplay. When I go to start / computer, I see not all removable
  Discs representing the SD/MMC slot. BTW, for the record, I formatted the hard disk several times.

  I am running Vista SP2.

  It fail to read a map, or a LOT of cards?  Have you tried stopping and restarting the computer?  Remember that the reader will not be displayed in my computer, unless there is a card in there - an empty card reader usually does not appear.  Also be sure that you do not put a SD - HC (high capacity) card in a drive that cannot read - no longer former readers.

• Re: Equium A100-027 battery does not charge

  I have an Equium A100-027 aged from 4 months which worked flawlessly until last night. My wife was using it when it ran out of power and we do charge again. The box on the cable becomes hot butno power seems to go to the computer laptop itself. Any ideas please?

  Hello

  Can you can start and run the notebook without the battery and only connected to the adapter?
  The AC is light on?

  If not then the problem could be linked to the defective sector adapter and I recommend you check it by a Toshiba ASP.

  I enjoyed some comments!

• Equium A100: Audio driver does not not WinXP

  Hi, when I bought my laptop I had Vista installed on it, I installed win XP, but I had no drivers, but I downloaded Toshiba & Utilities CD tools that have all the drivers for my lapop, everything works well only realtek audio driver does not work correctly when I restart my pc error appears, I made the screenshot of it it maybe you can help me with this problem.

  Here is the link to see srceenshot: http://rstheclan.googlepages.com/error.JPG

  Have you installed the two KBs (knowledge base) of Microsoft before running the installation program driver sound?

  You can try and download the audio drivers manually and give it a reinstall. Not to mention that this error message, play sound in Windows?
  Need drivers, you can find here: http://eu.computers.toshiba-europe.com (Support & downloads)

  Another question. What Service Pack you are using? Always SP2 or SP3 brand new? With the last of them, there are sometimes problems with the realtek sound card drivers.

• Satellite A100-033 - ODD does not read the CD but DVD

  My CD player has started giving me problems.
  He doesn't read any CD I put in (particularly the CD Audio).

  It plays DVD fine.
  I am also unable to burn CDs that the system does not detect a CD.

  Any suggestions on what I should do?

  Hello

  May be there is dust on the lens of the CD/DVD drive so I recommend cleaning the lens.

  Further, you should try to remove the upper and lower filters in the registry. Is often solved with the CD/DVD drive to check workaround on the Microsoft Web site:
  http://support.Microsoft.com/kb/314060

  In the worst cases, the CD/DVD drive must be replaced :(

• Equium A100-338: Sound does not work currently running Win XP

  Hello

  I have a Toshiba Equium A100-338, I recently installed windows XP on it but my sound is not working now.

  I downloaded all of the toshiba site realtek drivers still doesent work. Can someone please send tell me what sound card I have and where do I download it from.

  Thank you

  Hello

  The problem is that you need install Microsoft patches before you continue installing the audio driver.

  I found some useful tips and advice in this forum and it seems that you need to install the
  KB888111 and KB835221 hotfix before installing the sound driver.

  Please check this!

• Equium A200 PSAF5E - Vista does not load

  Having a problem with my laptop, got a nasty static shock out of it the other day and since then windows Vista don't is not loading.
  I tried the reinstallation disc, but it only that load files windows then you get the loading screen for windows for an hour then just a white screen with a cursor on it.

  I'm stuck for ideas if reinstall drive does not work and I really don't want to format :(

  Hello

  You are able to access the BIOS?
  If Yes check if the HARD drive and the CD/DVD has been recognized correctly.

  If the HARD disk is not recognized HARD drive malfunction is possible!

• Windows Vista does not recognize the removable storage device

  ISSUE INITIAL 2010-03-03)
  Here's the scenario:
  1. Insert the card compact flash.
  2 computer recognizes the removable storage (that is, it is assigned a drive letter and appears in disk management).
  3. use the icon remove the device safely in the taskbar to stop the machine to remove safely.
  4. remove the card compact flash.
  5. Insert the compact flash card.
  6. the computer does not recognize removable storage (that is, it is not assigned a drive letter and does not appear in disk management).

  The only way I can get windows to recognize the drive is to restart my computer. How can I get windows recognize the drive without having to reboot?   This problem does not occur with USB flash drives.

  Windows Vista Hame Premium, 64-bit, Service Pack 2 operating system

  UPDATE (04/03/2010):
  I have more information, I hope this helps to reach a solution.

  -J' repeated the steps above 1 to 3, with open Device Manager.  In step 3, in the Device Manager window, the icon for the question USB mass storage device becomes the exclamation point in yellow triangle icon.  Check its properties on the tab "General", in the "Device status" box, it says: "Windows cannot use this hardware device because it has been established for"safe removal", but it has not been removed from the computer. (Code 47)  IX this problem, disconnect the device from your computer and then reconnect it.  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
  -J' then removed the card and rest of the error state.
  -J' I re inserted the card, and rest of the error state.
  -J' I then tried to update the driver by accessing the tab "driver", click on "Update driver", click on "Automatically search for an updated driver", and the result was "the best driver for your device is already installed."

  I found the solution on this hp web page:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07910&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3876397&lang=en#N1074

  Basically, it says NOT to use the function "remove the device safely.  Instead, just right-click on the drive in the Solution Explorer, then choose "Eject".  Works perfectly.

  Some excerpts...
  "Memory card readers are devices that use the icon remove the device safely in the notification area in the taskbar). Do not click stop in the window, remove the device safely. Doing so can disconnect the card memory reader for Windows. In this case, restart the computer to reset the memory card reader. »
  "An alternative to the restart of the computer is to use the option optimize for fast moving functionality in Windows.

• SD card reader does not read SD cards

  Hey, its me again. Yesterday, I tried the card reader built into the laptop yesterday, and to my disappointment, it simply does not work. I push the card, and after that I heard the click, it sits in the slot of how it is supposed to. The light turns on for about a second, then turns off immediately. I tried on Windows 7 64-bit and Windows xp 64-bit and neither one, said despite the good drivers and all.

  Any ideas, or was it just bad design, like the rest of the machine?

  -Bunny/2dr Robinson

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/7kss73ww.exe

  If one does not work, try the drivers beta below:

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/7kss55ww.zip

• Windows does not read sd card

  My SD card is the my camera, but when I put it in my laptop windows is not read.  What can I do to solve this problem.

  It reads any of my sd cards I got.   I have a kodak. don't know if I can bc I can't find my power cord

  ==================================
  If you insert the SD card into the computer card reader and
  Reach... Start / computer... you should see a few removable
  Discs that represent the slots on your multicard reader.

  If you click on the left that corresponds to your SD card
  You should be able to see the files on the card and copy.
  Paste or drag and drop in a folder on your hard drive.

  Maybe the following will help you restore AutoPlay:

  Windows Vista-
  Troubleshoot AutoPlay
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

  Windows Vista-
  How to change the auto run settings
  http://windowshelp.Microsoft.com/Windows/en-us/help/40f23376-1351-49d5-8d48-5c05d35f2ac81033.mspx

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/7e1fe788-0747-4E00-895B-c3461b1ddd971033.mspx
  John Inzer - MS - MVP - digital media experience