Equium A100 - battery will last no more than 2-3 minutes

Similar Questions

• call lasts not more than 55 seconds

  Hello

  This is my first time using Skype for calls. For some reason any calls lasts not more than 55 seconds. I tried to sign Skype App and restart again but it still the same.

  My mobile is Nexus 6.

  I use Skype to call the mobile line Turkey.

  After searching the Web, I discovered that I have to use a vpn connectivity and it worked.

• Alert on the desktop of an email to last for more than 30 seconds?

  Is there a way to get the desktop of an email alert to last for more than 30 seconds? This seems to be the longer choice.

  How to access your e-mail?  Using Outlook Express or something else?

  If you set the new mail sound under control panel notification | Sounds, then you must find a longer sound for 30 seconds.  You can use any wav file.

  Steve

• The recipient in my e-mail program bar will not accept more than 3 letters before going empty. I can't send an e-mail.

  Yhe bar recipient will not accept more than 3 letters before going empty and I can not even answer or draw a contact name to load into this bar...

  original title: I can't send email

  Windows 7 and using the same hotmail address since the end of the 1990s

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Equium A100-303: looking to add more RAM

  Hello

  I recently bought a laptop equium A100-303 and am lookin to add more RAM. I was just wondering if it should be buffered or non-buffered or is it important?

  I currently have 1 GB of ram (512 + 512 MB as it is a dual core processor) and I'm looking to move to 2 GB (1024 + 1024). I know that the guy is PC4200, 200 pin SODIMM.

  Also where would be the cheepest place to buy these? Thank you.

  Hello

  > just wondering if it should be buffered or non-buffered or is it important

  Well, Toshiba has recommended using own memory as PA3411U-2M1G modules, but I put t find any information if the module supports ECC (means stored stamped) or Non - ECC (means not stamped)
  To my knowledge, the buffer ECC is about 30% slower than Non - ECC modules.

  He name of your choice what you will buy, but I would recommend purchasing a brand s module.
  I know modules without name are cheaper brand modules are much faster and performance, but the quality is better in the form of modules without name.

  So googel a bit and you will find many offers online. Simply compare prices

• Equium A100 - battery rapidly discharges

  Hi Experts

  I am facing a strange problem on my laptop, my battery get quickly performs most of the time in two minutes, and he States (7 percent). I don't know if I need to replace my battery.

  Laptop: Equium A100 - PSAABE
  OS: Windows Vista SP1

  Can someone help me solve the problem.

  Kind regards
  Mary

  How long does it take until your battery is completely dead?

  Usually battery working time depends on the use of the laptop.
  But running a standard application like Word or IE, the laptop needs to run more than one time by using the battery.

  For me looks a bit a battery problem maybe the battery is simply dead.
  Yes, this can happen and there is nothing unusual.

  After about 500 times charge / discharge the battery begins to lose own performance and it s only a matter of time, when the battery needs to be replaced.

  So in my opinion, the battery should be checked.

• Equium A100 - 338 will not start

  Hello everyone I have an Equium A100-338. I bought it in Ireland a little one there.
  Well although it is just out of warranty and it won't start.
  The blue light comes on and the hard drive light comes on for a second, and nothing happens.

  I tried to disconnect the battery a few times. Would not at all light up the screen.
  I plugged the machine on an external monitor but not luck.

  Suggestions people?

  Post edited by: ADMIN

  A new motherboard is a part of portable more expensive so buying a new motherboard is always a costly affair.
  Maybe you should look for some motherboards of second hand on Ebay

• Motorola Backflip - will not send more than one text

  Hello

  I try to write a message that is more than an interesting text. It will no longer send... it will send the first text then it will repeat "SMS not sent" so that many other texts that have been in my initial shipment. It started just happens, that I've always been able to write a message as long as I want and it will happily send multiple text messages without complaining...

  Does anyone know where I can change this setting. I looked in the settings of Message but you can see nothing is there.

  I can't see anything under settings associated with it.

  Help, please!

  Thank you.

  Hi I have not installed anything related text. Infact I have only installed the apps were already there before resetting. Assistant Android is on everything until now lol. Its ok that I watched and apprently I can install a 3rd party sms management app that will do it for me. As long as I have a work around its ok. I just thought that there must be a setting somewhere so that it goes like this...

  Thank you.

• ReadyBoost will not use more than 2 GB 'Cache space used' on 4 GB ReadyBoost.sfcache file

  Windows 7 64 bit on a computer laptop 4 GB.

  I have a card SD of 2 4 GB dedicated to ReadyBoost, connected via USB2.   I tried to format the card as NTFS and exFAT and in both cases, Windows may correctly fill in the card with a ReadyBoost.sfcache file, which is about 3.8 GB (card is dedicated to ReadyBoost).
  =============
  (Pasted image in - did not show when I introduced first)
  
  =============
  The problem is that no matter how long the system running, perfmon displays 'Cache space used' is always less than 2 GB.
  He goes up regularly in the first ten minutes after enabling readyboost, then levels: less than 2 GB:

  =============
  (Pasted image in - did not show when I introduced first)
  
  =============
  (Of course the "put bytes in cache" are greater because of the compression.)   But it seems to use only about 1/2 of the 4 GB cache file.
  I tried to adjust to only use a 2000Mo cache file size, and then 'Cache space used' would not exceed 1.4 GB.

  Am I something wrong or bad what do the numbers mean or is it an inherent limitation of ReadyBoost due, for example, General fresh metadata in the cache file?

  As I frequently have max on my use of memory and I can not install more than 4 GB, I had significant performance gains when he might have already spent several minutes, beating the pagefile.   I hope to see even more benefits with a bigger Readyboost cache if possible.   I would also like to solve this problem before investing in a larger and more efficient card.

  Thank you and best regards,

  Hi Jeff,

  In some situations, you might not be able to use all of the memory on your device to speed up your computer. For example, some flash memory devices contain both slow and fast flash memory, but ReadyBoost can only use fast flash memory to speed up your computer.

  http://Windows.Microsoft.com/en-us/Windows/using-memory-storage-device-speed-computer#1TC=Windows-7

  Computers with discs hard fast (such as 7 200 or 10 000 rpm disks) could achieve minimum performance gains due to the already high disk i/o ReadyBoost. will read the files from the cache only when this so will improve performance. Hard drives surpass flash in sequential reading drives, but flash drives are faster when no sequential reads (because of the latency caused when the drive head must move to a different disk sector). As a result, ReadyBoost reads from the cache only for non sequential reads
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  Hope the helps of information.

• Computer will work no more than 3-4 seconds after start-up, then stops. New CPU installed

  I replaced a damaged AMD Phenom II quad CPU 820 HP said was a compatible AMD Phenom II 965 Black edition on my HP Pavilion p6320y quad. AMD has recommended I also replace the PSU with a 500w power supply 300w. This has been done with success as well. When I turn on the machine, the cooling fans turn on, but run for not more than 3-4 seconds and the machine turns off. The CPU is brand new and it has been determined to be good, not to have been a DOA. Does anyone have any suggestions?

  Here are the specifications of your desktop HP Pavilion p6320y and its card mother M2N78-(Violet6). Previously, these support pages stated that the motherboard has a maximum TDP of 95 watts. According to the specs, it supports the following processors;

  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  AMD Phenom II X 2 5xx (Callisto)

  AMD Athlon II X 4 6xx/6xxe (undactylopodite)

  AMD Athlon II X 3 4xx/4xxe (Rana)

  AMD Athlon II X 2 2xx/2xxe (Regor)

  The AMD Phenom II X 4 965 processors are valued at 125 watts and 140 watts and the motherboard exceeds 95 watts maximum. In addition, BE or "Black Edition" processors are not listed as supported based on specifications.

  Please send Bravo

• Slideshow with buttons will not allow more than one cycle through the timeline.

  Hi, I'm new to AS3. I have a slideshow with 4 slides. They are all in scene 1 in the timeline. Each is on its own layer (and I have a fade between them on the timeline effect). I added labels to a separate layer in the timeline panel so that I could use the front and back to "accelerate the process" essentially (instead of wait for the slide to change). I can successfully use the buttons to scroll through the slideshow once, but if I try to scroll the slides more than once, I get no further than the first slide.

  I put this code on the buttons in the first frame of each section marked on my calendar:

  fwd_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_18);

  function fl_ClickToGoToAndPlayFromFrame_18(event:MouseEvent):void

  {

  gotoAndPlay ("Shopper_2");

  }

  back_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_19);

  function fl_ClickToGoToAndPlayFromFrame_19(event:MouseEvent):void

  {

  gotoAndPlay ("Shopper_1");

  }

  Any ideas?

  Kind regards

  zerozone

  The code for the buttons would not change much and would not be in frame 1.  You would only change the functions to use variables for the gotoAndPlay() class

  var fwdFrame:uint =? ; Use whatever the value would be for the goto frame 1 normally

  var backFrame = 1;

  fwd_btn.addEventListener (MouseEvent.CLICK, fl_goForward);

  function fl_goForward(event:MouseEvent):void {}

  gotoAndPlay (fwdFrame);

  }

  back_btn.addEventListener (MouseEvent.CLICK, fl_goBack);

  function fl_goBack(event:MouseEvent):void {}

  gotoAndPlay (backFrame);

  }

  Make sure that this layer extends the full chronology tlength so that variables and functions are available all she.

  Then, you just need to change the values of fedFrame and backFrame again each breakpoint on the timeline.

• Equium A100-147 will not connect wireless Internet!

  Hello
  For these last months that my cell phone was able to connect to internet, I think I must have downloaded a virus that deleted the necessary drivers for the wireless card to work, it is still all access points, but it does not connect.

  I tried to reinstall the operating system (Media Center) a few times - that didn't work, and now I have some drivers that I got from my computer on a toshiba Web site - they don't work anymore.

  I'm stuck now because I've tried everything I can think of and nothing works, so I hope I can get some good advice on here :D
  Thank you

  Hello

  I really put t understand why the installation of the OS is so hard :(
  You have received the Toshiba Recovery CD. On this CD all the drivers and tools are already preinstalled.
  You insert this CD into the CD/DVD to boot from the CD drive and the installation will begin. After 10-15 min the installation will end and the laptop should be ready for use.

  Then configure the WLan access again (encryption, SID, MAC address, etc.) and enjoy.

• Help!... PRINTER LEXMARK ALL-IN-ONE X 5650 WILL NOT PRINT MORE THAN ONE PAGE... Help! (READY TO BURN THIS * @# % ^ THING)

  THIS IS MY PROBLEM... IM RUNNING WINDOWS 7, I AM ABLE TO CONNECT THE PRINTER TO THE COMPUTER WITHOUT PROBLEM. IF I TRY TO PRINT OR COPY ONLY ONE PAGE AT A TIME MOER THE PRINTER WILL RESTART AFTER THE FIRST PAGE HAS FINISHED PRINTING. I ALSO NOTICED THAT THE PRINTER DOESN'T IS NOT DISPLAY INK CORRECT LEVEL ON THE SCREEN OF THE PRINTER, (BLACK INK INK DIRECT 0% 0%) BUT IF I CHECK THE LEVEL THROUGH THE PREFERENCES OF COMPUTER PRINTER IT SHOWS THAT THE BLACK INK IS USED MORE OF THE COLOR INK. (BLACK INK INK 75%-100%). THE QULITY IMPRESSION IS POOR TO MUCH GREEN... ALSO WHEN I CANCEL THE JOB IN THE MIDDEL OF A PRINT JOB IT ALSO RESTARTS. I LAUNCHED A PRINT OF THE COMPUTER TEST PAGE AND IT PRINTS OUT THERE BUT WHEN ITS DONE WITH THE FIRST IMPRESSION AGIN RESTART ANOTHER. AND THE SAME FOR ALL "CARTRIDGES CLEAN CARTRIDGES-ALINGN" THE ONLY THING THAT WORKS WELL IS THE SCANNER... WHEN I PRINT A TEST PAGE TO THE PRINTER, I SEE A MESSAGE 'BAD CHIP HEATING' CAN THIS BE THE CAUSE OF ALL MY PROBLEMS, OTHERWISE THAT MEANS...

  HELP.............................. HELP.................................... HELP.......................

  ......................................... WHERES MY GAS AND A LIGHTER...

  Hi MTCAIME,

  ·         If it works well before? Do you remember any recent software and hardware changes made on your computer?

  1. I even suggest to run the troubleshooter under construction, link, you can refer to the same thing: Open the printer Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Printer-troubleshooter

  2. make sure that the printer spooler is set to automatic, steps to set the service to automatic

  i. click on start and type services.msc in the search box

  II. search for the Printer Spooler service

  III. right-click on the service

  IV. If the service is stopped and then starts the service

  v. Select Properties

  VI. and in startup type, select automatic

  3 uninstall the driver and related software and reinstall it back. To uninstall, see the link below: Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Link for the drivers from the Lexmark Web site: http://support.lexmark.com/index?locale=en&productCode=LEXMARK_X5650&userlocale=EN_US&segment=DOWNLOAD&os=WINDOWS_7&page=downloadsList&oslocale=en_US#4

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• FF after 41.0 will not download more than 500K to Yahoo. IE, Chrome and Pale Moon OK, - conflict between Firefox & Trusteer

  Firefox has stopped transfer of files larger than 500 k. In Yahoo mail on smaller files, the green bar shows upload and file charges when it is complete. On larger files the green progress bar never shows up and finally the message is you check the internet connection.

  There are no problems when you use IE or Chrome.

  The two machines that have problems are the two Win7. A new Win10 machine is OK using the same add on s (Adblock and Chrome FX).

  Firefox has been started in safe mode, everything has add on the taken away and had a clean install. None of these steps have resolved the issue.

  Disable the end point Trusteer.

• Your macbook lasts for more than 3 years? I'm on my 3rd since 2009, why why why? Is there life expectancy, only 3 years?

  I'm on my macBook since 2009 and 3rd A Mac desktop. I do not understand why my crash, I thought that these lasted 5 to 7 years. Everything I do is simple MOM stuff in Microsoft Office, Entourage, Excel, iPhoto and Facebook. My other comes crashing and all my photos are on it so intend to take the last two at the Genius Bar to see if they can recover photos. Also expensive that they are they should not crash like that. What happens in the world?

  My last MacBook Pro was 8 years old before I had to replace it.