Equium A110 - how to connect to PowerMac?

Similar Questions

• Equium M50 - how to connect firewire devices?

  Equium M50 Intel Celeron M 360 1.4 GHz processor

  Referring to the above, I am able to download photos from my camera to my hard drive, but to download videos that I need to connect a firewire camcorder to the computer. There is no connector on the computer to take in this regard.

  Is there a solution to this?

  Hello

  I put t know if your camera has a firewire port, but if yes it is listed in the Device Manager as IEEE 1394 bus host controller.

  If your device doesn't have a firewire port, you can buy the PCMCIA card with firewire port. By the way: M50 has 4 USB ports (two in the back near LAN port and two near the DVD drive on the right). On models with firewire ports it is definitively placed near S-video output port as Michael described.

  Good bye

• Equium A110: How replaceme hinges

  Hi, I am looking to source replacement hinges for my Toshiba laptop, could someone point me in the right direction that I can't find anything on the net :(

  Thank you very much

  Hello hamido

  I can imagine that each spare part is not available when search you on the internet, especially for models of laptops newer and newer. Because of this, you should try to contact Toshiba service partners authorized in your country. Maybe they can order hinges for you.

• Equium A110 - wireless connection loss

  Hi all
  can you help me?

  I lost the connection on my Equium A110 and also an another laptop (Toshiba no) it askes for or an incorrect IP address.

  I have a linksys router that took her to date filmware

  Hello

  For me it s definitely not a laptop issue because on other cell phones, you have a problem with the Wi - Fi connection too.
  It s not that easy to tell what the reason is for this

  In your case I would try the command line the command ipconfig / renew
  It work?

  If it doesn't work you should try unplugging the router of the adapter AC/DC for at least 5 minutes. Then plug back the AC/DC adapter and try it.

  Good luck!

• How to get S-Video on Equium A110

  Hello

  I'm trying to get the s-video output, working on my Equium A110.
  It seems to be simple according to the manual, but I'm having no luck at all.

  When I hit FN + F5 to change, I get only the option of the LCD screen is not switchable.
  Also when I go into the graphics options (display) I can't activate the 2nd exit of the screen? (Is anything?)

  I need to enable something in the Bios to get this function to work?

  Any help would be appreciated.

  Jon.

  Hello

  You want to connect the TV to the laptop. Yes?

  Before that you would use the FN + F5 combination TV must be connected to the laptop using the s-video cable.
  Some older TV s, it is s-video channel too. So please check your TV settings exactly.

  Usually, you don t need allow anything in the BIOS. All you have to do is connect to the TV, then check the settings, and then use the FN + F5 key combination.

  Good bye

• Equium A110-252 - how can I find the network drivers?

  Hi guys :)

  I have just reinstalled Win XP on a model number Equium A110 - 252 PSAB2E
  Can't find driver for network controller... everyone has ideas?
  Ive looked for in these forums, but in vain :(
  any help would be appreciated

  Thank you

  GW

  Have you looked on the Toshiba site?
  You will find the network driver and all other drivers.

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Equium A110 - boot in the BIOS

  Hi all

  I recently encountered a problem with my * Equium A110-233 * portable. This laptop was in a closet for a year or two after that a friend of a friend connected a digital camera to transfer pictures laptop whereapon turns off quickly. It was an instant power off as I said. The laptop wouldn't start after that, in fact he showed no response at all.

  Now, I have pulled out of the Cabinet and plugged the power cord for a dip and see if I got lucky. To my amazement it started after a bit of charge. I re - formatted and reinstalled windows XP with SP3. The laptop starts for two days with no problems but has now ceased to behave.

  The problem I have is this: what power the laptop up posts, but then goes directly into the bios every time. He did this several times on and outside and I thought nothing of him, as it would eventualy support windows XP after the reboot. But now he simply refuses to do anything other than go straight into the wood to the power upward.
  I've updated / flashed the bios after installing XP innitialy. I have no idea as to what may be the problem. Here's what I've checked so far:

  RAM - checked and working properly.
  HDD - working properly.
  Battery - offers power when out of AC.
  The power supply provides the power such that is light on laptop.

  Any ideas would be accepted with gratitude.

  Thank you.

  Hmm maybe the RCT/BIOS battery is empty?  :|
  This could be possible because the laptop did not serve any longer.
  In order to recharge the BISO battery the laptop must be connected to the power adapter and should be turned on. The battery should charge for 24 hours.

  Of course, it could be a motherboard problem which would explain the permeable problems

• Equium A110: Cannot use LAN after wake up from hibernation or standby

  Hi guys

  I can't use lan on my tosiba equium A110 after he wakes up from hibernation or standby. Lan icon there is bur that the internet will not work. Please help me.

  Another problem. When I try to cut something I can't paste it if I open a new folder. I need to keep the file open back cut once again and then paste it. I mean that if after the cut, I open any folder it won't paste it.

  Please help me.

  Thank you

  Hello

  Have you tried to update the connection? Something similar happens on my laptop, but not with LAN but with WLan. If you right click on the little icon of lan, you will see the option to repair. Check it out.

  Also found this possibility. I put t know if it will help but try it.
  1. go to [start]-> [Control Panel]-> select [System]
  2. the system properties dialogue box select [Hardware] tab-> click [Device Manager]
  3. in the Device Manager dialog box, select [network adapters]-> double-click [Intel (r) PRO/100 VE Network Connection]
  4. go in the [Advanced] tab-> property [Wake on settings] select-> Select [Wake on Magic & realized]
  5. Press [OK] to close the dialog box.

• Equium A110-233 bad sound quality

  Hi all, please can someone help,

  I recently bought a satellite A110-233 and the sound quality is terrible (I am aware that there is a conrtol of volume on the front of the laptop until someone asks ;-))

  I played around with all the settings including the Tru-Surround options and via the internal speaker volume level is very low, even though unfortunately this isn't my main concern. The main reason I bought the laptop was to use as the source for the reading of the media through my Hi-Fi and TV channel. When I connect to my stereo using a socket type of headphone 3.5 mm headphone output on decision-making for the twin RCA inputs on my system audio is absolutely appalling. The volume is very low and there is no depth to the sound and absolutely NOT that it's low.

  I tried to play the same files on the other half cell and the output is absolutely fine.

  I tried to download a new copy of the audio driver and install that. I also tried a full format of the laptop and reinstall windows from zero (not from the appropriate disk recovery, but since the windows CD), still no joy.

  Please please can someone help me because I can't use my system for what I bought it for!

  Thank you all

  Hello

  Hmmm, I'm not an owner Equium A110 and so I can't give you a professional opinion on this problem.
  For me it is not easy to tell if it is a hardware/software problem, or if it is simply a sound quality.

  In any case... I noticed several discussions here in the forum about bass on laptops Satellite A100 and a person has provided a solution.

  According to several messages try to delete or to rename the files RTHDAEQ0. DAT and RTHDAEQ1. DAT.
  You should find these files in the C:\Windows\System32\Drivers\ folder

  But it is a solution of A100 series and I don't know if it helps on an A110.
  However, test it and please report results... It is interesting to me

  Please also check this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18720&start=0

• Bug BIOS PCI found for Equium A110-233 during startup

  Hi all

  I get an error of "PCI BIOS bug found" when that I start my Equium A110-233. It gives a number, but the error flies by so fast, that I'm not.

  I have not noticed errors running the computer except that my SD card reader does not work, but because I am under that Linux Ubuntu Gutsy Gibbon was based. I am aware that Toshiba is not supported for the drivers for this device.

  How bad are errors of BIOS bug? It needs fixing?
  I can query the operating system to find out the bug number BIOS / details?
  Can it be fixed with a BIOS update loaded via the Windows emulator or virtual machine?

  Thanks for all the ideas in advance.

  Hello Rob

  You can use Windows XP Home edition on your laptop with no problems?

• Equium A110-252 freezes after formatting DVD - RW

  Bought the computer laptop satellite A110-252 a couple of days to replace my desktop computer that mistaken for suicide. I try to create DVDs to play on my DVD, AVI and WMV player using the supplied software ie. InterVideo WinDVD Creator 2.

  The first attempt, converting a small file WMV MPEG-2, burned and played but when I went back to erase/format the disc and burn full disk file had been damaged and marked read-only, windows completely Explorer freeze because he tried to access the D: / drive.

  In addition, all attempts convert and burn the result in no data being burned and the drive being rendered useless later. Did not attempt any burn more that I am running out of discs to test.

  Use the Hitachi LG Equium A110-252 DVD Super Multi GMA-4082N

  Using Memorex DVD - RW media

  If anyone else has had this problem and more importantly, knows how to solve this problem. What is the DVD itself support? Looked for a list of support preferred for this drive but had no luck so far. They worked fine on my previous LG DVD +-RW on my desk now buried.

  Any help will be most appreciated.

  Thanks in advance :)

  Hmmm, believe me, it of not easy to say what's wrong or why it occurs.

  How have you tried to erase the DVD - RW? What applications did you use?
  It seems that the application caused the laptop freezing.
  Why? Who knows try using another type of DVD - RW and try to use various means to erase the DVD - RW.

  Nero burning rom application is a very interesting tool and provide many different options. You can use it to erase DVD - rw

• How to connect my i phone 6 to 10 on my computer windows

  How to connect my I Phone 6-10 Windows on my computer

  An iPhone will pair not via Bluetooth to a computer (Mac or Windows) with the exception of hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

• How to connect to itunes for ipad airplay without using computer?

  HOW to CONNECT IPAD AIRPLAY to ITUNES WITHOUT the HELP of a FULL ❓l

  There is no need to shout. What you're trying to use AirPlay to stream content from your iPad to?

  Using AirPlay: How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support.

  (I asked for your message to be moved to use iPad forum, where you have posted is for questions about the iTunes U app.)

• How to connect new IMac to old IMac to transfer files?

  I need to plug my June 2010 IMac in a new IMac 2016 to transfer data.  What cable do I and what ports should I use to connect?

  Thank you.

  Gina

  You can do it with an Ethernet cable (and on two Macs Ethernet ports) and use file sharing.  You can also connect via WiFi, but the transfer speed will be slower.  If both Mac connected to the Internet via a common router, you already have a link between two Macs.  Here is information on file sharing

  How to connect with the file sharing on your Mac - Apple Support

  There is also an automated tool called Migration Wizard, if duties are not suitable for your task

  Move your content to a new Mac - Apple Support

• How to connect a new MacBook in my time for the initial file transfer capsule

  How to connect a new MacBook to my existing time capsule to transfer files as part of the first implementation of my MacBook?

  You say that you have a new MacBook and that you have posted to the forum for the retina MacBook 12 "section, but your tag indicates that you have a MacBook Pro. Please specify.