Equium A60 unstable after installing Windows XP SP2

Similar Questions

• Could not start the desktop Vista after installing Windows Vista SP2, error: 0XC0190036.

  Original title: vista sp2 problem.

  I have a laptop that I haven't used in a while.  I took on a trip and received the message that the updates are available.  One was SP2.  After the update is complete, it failed to start with a message OXC0190036.

  Startup Repair said that he could not solve the problem.  Restoration of the system has not only restore - labeled SP1 and it allows you to finalize the restoration of files and stays there.  (I waited for 3 hours without change).
  I have a XP install disc that I used before installing Win 7 on my desktop, but it does not give me the opportunity to do an installation.
  Can enter the command prompt, I'm perplexed as to what to do.
  I want to get this laptop that works so I can give to someone who needs a faster machine.
  Thank you.
  Harold Menzel

  Hello

  XP disk will not help you to fix Vista

  As the system restore does not try a startup repair and / or a restoration of the system using a Microsoft Vista DVD

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here are a few ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• No sound after installing Windows Vista SP2

  Vista service pack 2 and the loss of its

  Windows vista 32 bit
  I installed vista service pack 2 update and lost sound, I restored my computer to service pack 2 and sound istalling pre was there. I have re-installed now update sevice pack 2 and its missing again. It's the same with service pack 1 and I had to restore my computer to factory settings to retrieve the sound. I really don't want to have to do it again.
  I tried the microsoft fix that says everything is fine. I've done all the things suggested on troubleshooting audio from vista - still no sound. My internet explore keeps reloading when I don't have service pack 2 installed.
  What can I do to fix this?

  Like Nettie63, after SP2 has been installed, my sound on the left and the utility 'fix it' said everything of fine.  I tried the fix above with the research of STacSV64.exe that by pasting into the search bar.  However, he said that there was no file so I couldn't just double-click on it.

  What do you recommend?   Thank you very much.

  =====================================
  Have you tried all the suggestions in the following articles:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  (948491) how to troubleshoot sound
  problems that you experience after having
  install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481/

  (948465) information about Service Pack 2
  for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Error code: 0xC004E002, the software licensing service reported that the license store contains data of the unstable after installing Windows updates.

  Original title: I installed a windows update and all of a sudden I can't connect to my computer using my password it says error data is unstable with microsoft

  It says the software licensing service reported that the license store contains inconsistent data.      I have a windows vista hp pavillian

  Code 0xC004E002

  Hi JillCollas,

  When you are in the display of error message you will get a support contact option once you click on it, it should open up Internet explorer. If you are able to open IE page, then follow the steps and see if it helps.

  a. Click Start and type cmd in the search box.

  b. right click on cmd and then click Run as administrator.

  c. at the command prompt, type the following commands and press ENTER:

  Type: net stop slsvc (it may ask you if you're sure, select Yes)

  Type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

  Type: Rename tokens.bar tokens.dat

  Type: cd %windir%\system32

  Type: net start slsvc

  Type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)

  Reboot twice

  You may enter the product again key, and then activate.

  For more information, you can consult the following articles:

  Error 0xC004E002 during activation of Windows Vista and Windows Server 2008

  Activating Windows: Frequently asked questions

  Hope this information is useful.

• After installing Windows Vista SP2 will bluescreen message updated changes failed and recovery

  Original title: start windows vista to the top of the page. (URGENT)

  My windows vista computer said it would install an update for the with a window pack 2 or something and it says installation failed, and now it returns changes. The screen and the message was on my laptop for hours. After the first hour, I decided to turn off main power switch immediately because it was taking too long and when I turned it back on. It is returned to the blue screen with the message update failed and their changes in recovery. Then what should I do? I want to continue with my laptop again and he has never done this before. Please help as soon as POSSIBLE. Antonio

  Hi Antonio,.

  You can check out the following link and try the suggested steps to resolve the problem installing Vista SP
  update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358/en-us

  Also see the KB article and check:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

• Problems with the port replicator USB 2.0 after installing Windows XP - SP2

  Hello world

  I have a Satellite M30 742 with MS-Windows XP Professional installed. I plugged most of my external devices to him through a port replicator Toshiba USB 2.0. Everything seems to work fine until I installed Service Pack 2.

  Therefore, starting my laptop computer is an adventure to recognize random port replicator: usually four USB ports are recognized, but the ports series and parallel, keyboard and mouse ports are ignored, with a message "unknown USB device".

  Uninstalling and reinstalling, them or their drivers are a vain effort, since Windows keep ignoring them.

  However, in other occasions, they are recognized without problems (even if windows insist on installing their drivers each time that it finds, even if I have already installed a large number of times).

  Please, you have an idea to solve this problem * boring * problem?

  Thank you very much in advance,
  Ricardo.

  Hello

  what you might try is to reinstall the chipset driver because I think that the USB is connected to the chipset.

  In my opinion the Windows upgrade had changed the pilot USB from Toshiba a MS a. So the Port Replicator is not recognized all the time.

  Rudi Bye

• I install Windows xp sp2 and insert the product key but it says it failed.

  Hi, this is Rohit.I have a big problem I have buy windows xp sp3, and after 6 months or more my o/s computer corrupted, then I install Windows xp sp2 and insert the product key but it says that it is fail... So please tell me what I can do... Please tell me or send email to * address email is removed from the privacy *

  Number of keys that came with XP SP3 licenses can be installed on systems of SP3 - MS loose a new set of keys with SP3.

  You must use the appropriate SP3 provided with your key media.

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problems installing HP Deskjet F380 printer after installing Windows Vista Service Pack 2

  OUR SYSTEM: Vista Home PREMIUM "Service PACK 1, 32 - bit, WE installed Service Pack 2, after that, we try to download & install" HP Deskjet F 380 all-in-ONE printer, BUT could not because the installation not completed & failed.

  Original title: having the problem after installing Service Pack 2

  We recovered our system to 'Out of BOX STATE' MEANS that WE BECAME NEW SERVICE PACK 1, WE SUCCEED to INSTALL OUR HP Deskjet F 380 & work properly, YESTERDAY we RECEIVED THIS YEAR IMPORTANT UPDATE IS AVAILABLE THAT IS "Service Pack 2 (KB 948465).

  Please notify can DOWNLOAD us & INSTALL SERVICE PACK 2. WITHOUT OUR INSTALLATION OF THE

  HP Deskjet F 380.

  YOUR ADVICE WILL BE VERY MUCH APPRECIATED

  Hi man chic,

  1. This only happens when you try to install the printer HP or with other programs?

  Step 1:

  Before you install Windows Vista SP2, uninstall completely printing software.

  Check out the link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Step 2:

  After installing SP2, try to install the latest version of the drivers available for the printer and the printer and check if it helps.

  Links of HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=14481&LC=en&DLC=en&CC=US&OS=2093&Rule=13237&Product=1128296&sw_lang=

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• HP pavilion zv5000: missing zv5000 system drivers of base after installing windows 7

  After installing windows 7 displays device management point exclaimation

  Hardware ID:

  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C & REV_01
  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C
  PCI\VEN_104C & DEV_8201 & CC_088000
  PCI\VEN_104C & DEV_8201 & CC_0880

  Also CD-ROM/DVD-rom won't recognize my cd/DVD, but Device Manager shows the work of the unit.

  Need help

  Hello:

  You can use the driver card reader XP support for your laptop and driver page.

  There is no vista or W7 driver for this card reader.

  If auto installation does not work, manually install the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-29677-1 & CC = US & DLC = in & LC = on & os = 228 & Product = 385148 & sw_lang =

• Computer OS used to start after installing windows 10

  Hello im having problem starting my system after installing windows 10. I did the install and it worked fine since the upgrade to 8.1. But then I tried to format the drive and in the menu format, he's stuck at 2%, and then I restarted the computer. Now it will hang at the hp logo and go back to the same logo. Do I have to replace my hard drive?

  What I understand, if you have completed the 10 Windows Installer and everything has happened until the end, then you are supposed to be able to do a clean install with the download of Windows 10 DVD or USB.  With a working computer, GO to THIS PAGEand scroll down to the button "download tool" selection the 64-bit version.  Once clicked, it will ask you if you want a DVD or USB for the iso.

  Once it's done and you have the DVD or the USB version, see if you can install Windows 10.  If this fails, you may need to replace the hard drive.

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.