Equium L20-264: CD/DVD player can read but not burn discs

Similar Questions

• Re: Satellite A200 - DVD player can read but cannot write

  Hello

  Some time ago my DVD writter has stopped working. I have Windows 7 with the latest toshiba drivers.

  The DVD is very good playback of the inserted cd/dvd, the unit is OK in Device Manager, but when you write a DVD it fails somewhere over 50% with "unknown error."

  I tried Nero and standard windows app.

  What do you recommend?

  Hello

  Did you test different DVD from different manufacturers?
  I had a similar problem in the past and since I use TDK R DVDs and CDs and these discs work correctly.

  I also recommend cleaning the DVD player with alkohole laser lens and the tip of the batting.

• can read but not write in the Numbers worksheet

  Can read but not write in the worksheet Numbers on my MacBook.

  Hi Frederic,.

  This also happens if you are still in the screenshot. Is there a "Done" down button on the right?

  Quinn

• Qosmio F30 - 112 - DVD player can read and burn DVDs

  Hey everybody!

  Here's the problem: my DVD-ROM won't read some DVDs, it does not burn. In Nero when it start burning error pop up and the message is: Power calibration error

  I tried with all the testers for writer and reader of alerady and they all did not find any problem. They said that the recorder and player work properly. I even reinstalled twice end it always shows me this error and it will not burn or read some DVD Windows Vista (which I tried to read another computer and there is no problem). I tried to clean it with cleaning and nothing.

  I think that this problem started since I've updated the firmwire F103, but I do not know...

  Help please.

  Hello!

  Was the update of the firmware of your CD/DVD drive or have you another one? In my view, the drive could be faulty due to a bad firmware

  But before you exchange the drive, you should try to remove the upper and lower filters in the Windows registry:
  (1) start Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Nero does not recognize my dvd RW hp 1270i writer, and I can't find a driver for this player. I can read but not write to it.

  This drive came installed on the dell dimension e521 system, July 2009. There the amd64 processor, running 32-bit pro sp. for some strange reason, XP tells me that it is a D in 1270. Is there something special about how the drive is connected to the PC?

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you receive an error message while you try to burn the CD?

  3. are you able to burn in windows media player?

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to run fix it from the link below.

  Your CD or DVD drive cannot read or write media:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs.

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• Satellite A60-302: CD Player read DVDs and CDs but not burned discs

  I have a Toshiba laptop: Satellite A60-302 and I have a problem with the cd player. It can read DVDs and records I buy but it will not read burned discs (even the ones I burned with the portable computers own burner). Only from time to time, he will read a burned disc.
  I tried to clean the eye of laser of cd players, but it did not help.

  Anyone know what could be the problem?

  Hello

  This sounds like the CD burner doesn't burn CD correctly.
  You suggested that you used different types of CD.
  In the user manual, you will find a list of compatible media.
  These media has been tested and it works correctly.

  But if this happens with all CD, so possibly the drive cannot work properly and only a replacement would solve that problem.

• When I copy files to a CD in Roxio I get a statemet that my version of the file DLA can read but not modify or add. How to add extra files on the CD?

  I have Windows XP and the Service Package 3.  I try to use Western Digital MY BOOK Essential external drive and also the Roxio software.

  The following freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  CDBurnerXP
  http://CDBurnerXP.se/
  (Win XP, Vista, 7)

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

  CDBurnerXP create data disc
  http://CDBurnerXP.se/help/data/compiledata
  (the green bar at the bottom of the screen
  turns red if you add too many files)

• Equium - Toshiba DVD Player can't read DVD

  When I insert a DVD into my internal DVD Toshiba Island DVD player application starts but then displays this error message: -.

  + * Unable to output the video to an external device. Please change your device display by pressing Fn + F5 keys after the end of the application * +.

  I press Fn + F5 keys according to the directives and the drop-down list display Fn shows the symbol of the laptop before retreating off the screen. But still the DVD returns the same message and will not play. I find myself with Windows Media Player to play the DVD.

  What is going on?? What I am doing wrong?

  I'm new to the forum please excuse if this is a repeated question.  :-(

  What satellite notebook do you have?
  What operating system do you use?

  Try to update the DVD player that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Use an external monitor?

• Re: Satellite C660-125 DVD player can't read DVD

  Hi guys

  I have a C660-125 and its developed a problem with the DVD player. It can read CDs and burn fine CD, but it won't read or burn DVDs at all.

  I used a laser cleaner, I also googled firmware but can't find anything for her.

  Any ideas what is wrong with it?

  The model is TS-L633

  > I used a laser cleaner, I also googled firmware but can't find anything for her.

  I cleaned my alcohol BIZARRE or cotton tip laser lens and it worked like a charm. In your case worth a try too.

  In addition if an ODD firmware would be available, then you should find it on the European driver Toshiba page.
  I checked, but did not find a firmware for TS-L633 means that this firmware update is not necessary.

  But I found this Toshiba document:
  _ODD firmware update to solve problems with the Toshiba creator_ recovery CD
  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  But beware: the document contains files different firmware for TS-L633 on different sides. If your ODD is not on the list, don t try update firmware for your ODD would harm to the use of the firmware is not compatible!

• Equium L20-264: can I unlock the options in the Bios to change the speed of the CPU & FSB

  Hello

  I have a toshiba equium l20-264 today and I was wondering if I can open it the options in the bios to change the cpu speed and the speed of the fsb.

  But if you don't don't do this, I already have a Dell Xps laptop Overclcoked to 4.5 ghz (twisted majorly) and I installed today a very powerful cooler and heatsink of heat inside my laptop, I'm ready to overclock bu ti do not know if I can via bios but if so could you point me to guides for a code name overclocking intel celeron m 360 : DOTHAN

  Help, please

  regards James...

  Hello

  Unfortunately, this is not possible on the laptop.

  I o year owner of 3 different computers; two laptops and a desktop PC. The BIOS on the desktop is different and allows to change and increase the CPU. But the laptops BIOS does not allow to do something similar.

  Why? Because the CPU overclocking would increase the internal temperature and make portable is not stable and perhaps that it would infringe the motherboards and CPU!
  The notebooks run with maximum efficiency. If you compare the notebooks modules with cooling Office cooling modules you will see the difference!

  Please don t waste your time and don t find any possibility to overclock the CPU and the FSB

  concerning

• My dvd player will read disk now but my cd player won't can anyone help

  Hi, my dvd player will read disc now, but my cd player can not help everyone, also the copy of microsoft sent with the computor is not the same as that installed Wndows xp media center edition 2002 that they sent is as it says on the windows disk mredia Center version 2005 with update

  Update Rollup 2, can anyone advise me what to do?

  Hi Albert,

  Thanks for posting your question in the Microsoft community.

  I understand that you have 2 questions:

  1. The DVD works fine while the CD player does not work.
  2. You have Windows Media center 2002 edition installed on the computer, however received the disc with Windows Media center edition 2005.

  I would like to know if the understanding is incorrect.

  To solve the first problem, I suggest you visit the link and try the methods in the knowledge base article.

  How to troubleshoot common problems that occur when a Windows XP-based computer

  Cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  For the Windows Media center disc sent bad, you will need to contact the Microsoft customer service. Check the link for more information.

  http://support.Microsoft.com/kb/302822

  Let us know if you have any further questions. We will work together and solve problems.

• DVD Player cannot read the DVDs (but can read busy DVD)

  Hello

  I have Hp Pavilion dv6-6140us, a 64-bit engine and is running windows 7... I wanted to burn the iso of windows 8, but my dvd player is not able to read blank dvd, but it can read the non-empty disc and can also play movies... Please help... want to try to win 8 preview release

  Hello

  Follow these steps to reinstall the Beats Audio interface.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are done, reboot the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• Satellite L30-134 PSL33E: CD/DVD player can't read data CD

  I bought my laptop (Satellite L30-134 PSL33E) 4 months ago and I had no problem with the optical drive of my Satellite. But yesterday, I discovered that my drive is no longer can read data CDs.

  I created a CD with the Toshiba ToDisc utility which contained MP3s. The CD works fine on another computer but when I try to play them on this computer Windows laptop tells me that the CD is blank and asks me if I want to save data.

  It doesn't have this problem with the DVD, I can read and write perfectly. My optical drive is a CARPET * a DVD-RAM UJ - 841S. Windows says I have the latest driver for it (5.1.2535.0) but it says it's from 2001 (?) in the properties under the selected hardware.

  Help, please!

  Hello

  It is not easy to say what the problem is here. If you have time please check THIS document.

  Support Bulletin 98081245 CD burning: suggestions and troubleshooting. ‘

• Equium L20-264 - CPU upgrade

  Hello world

  I have Toshiba Equium L20-264 and I want to move into gear
  Can someone help me please?

  I had already upgraded to 2 GB of Ram, but my CPU is still 1.4 GHz.

  Please guide me what to do and if it supports several Ghz processor, which will be the best place to buy.

  Thank you.

  I assume that you have not read all the posts here in the forum about upgrading the CPU s for laptop?
  Did you?

  Some facts first:
  Update CPU is very delicate and depends on the chipset and BIOS support.
  In case one of the parties (chipset or bios) would not support new CPU, the will to power laptop on.

  Second: the laptop seems to be equipped with an Intel Celeron - M CPU, and I suppose the other Intel Celeron-M CPU be compatible:
  Intel Celeron M 370 (1.5 Ghz)
  Intel Celeron M 380 (1.6 Ghz)

  Everything supports the FSB 400 Mhz

  But guess what? Even if you add the new processor at 1.6 Ghz, the performance gain will be not noticeable. So in my eyes, CPU upgrade for this old book is useless. It won't add any performance benefits.

• Upgrade memory for Equium L20-264

  Hello

  I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

  Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
  -Windows® XP Home Edition
  -60 GB hard drive
  -256 MB DDR2 RAM
  -15 "TFT color display
  -Drive DVD Super Multi (Double Layer)

  Issues related to the:

  1. How can I remove the existing memory? Is there a guide of the user on this operation?

  2 How many slots have?

  3. What is the max memory per slot?

  4. can I buy Toshiba memory directly?

  It is rather urgent and would like a quick answer.

  Thanks in advance
  Rag99

  Hi mate.

  As far as I know your laptop supports two memory locations.
  They must be placed at the bottom of the unit.
  If you n t know how to change this then I recommend consulted the user manual!
  The manual can be downloaded from the Toshiba European page.
  I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

  PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules