Equium L20-264: how to get the restore CD

Similar Questions

• Equium L20-264 - how to remove the DVD drive?

  Hello

  I try to replace the DVD drive on this laptop and removed the setscrews on the base, but he didn't budge.

  There is another screw somewhere? I know that some have their screws under the keyboard, but that would need more than one? I also have a Satellite 350 and I took it easily by removing the screws located at the base.

  Any help would be appreciated

  Hello

  Please, check here

  http://www.irisvista.com/tech/

  It can help you

• Equium L20-264: can I unlock the options in the Bios to change the speed of the CPU & FSB

  Hello

  I have a toshiba equium l20-264 today and I was wondering if I can open it the options in the bios to change the cpu speed and the speed of the fsb.

  But if you don't don't do this, I already have a Dell Xps laptop Overclcoked to 4.5 ghz (twisted majorly) and I installed today a very powerful cooler and heatsink of heat inside my laptop, I'm ready to overclock bu ti do not know if I can via bios but if so could you point me to guides for a code name overclocking intel celeron m 360 : DOTHAN

  Help, please

  regards James...

  Hello

  Unfortunately, this is not possible on the laptop.

  I o year owner of 3 different computers; two laptops and a desktop PC. The BIOS on the desktop is different and allows to change and increase the CPU. But the laptops BIOS does not allow to do something similar.

  Why? Because the CPU overclocking would increase the internal temperature and make portable is not stable and perhaps that it would infringe the motherboards and CPU!
  The notebooks run with maximum efficiency. If you compare the notebooks modules with cooling Office cooling modules you will see the difference!

  Please don t waste your time and don t find any possibility to overclock the CPU and the FSB

  concerning

• Satellite P10: How to get the restore software?

  What is the best way to get the software to restore my Satellite P10 - I lost the original disk.

  Tools and drivers Toshiba download on the Toshiba site.
  If you want to buy the CD of restoration, you can order it from the service partner in your country.

• How to get the restore to factory for Lenovo x 220 CD

  I have a 220 X thinkpad but unfortunetly I don't have the CD to factory default before reformatting now how to get it and where do I buy this from?

  Welcome to the community!

  Call Lenovo Service. they should be able to provide. You can find your country here phone numbers:

  http://support.Lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613

  I hope this helps.

• Equium L20-264, do not recognize the removable hard drive

  Can anyone help. I haven't bought a nice no notebook on the weekend and you want to get the stuff to my Lacie hard drive that I use on my mac to work on.

  Last night I plugged the drive (USB with PSU) and messages little came "new device found" then "works and is ready to use" However he didn't appear in the list of drive in the my computer window. Went to Device Manager and found it listed checked there, he worked and what everything was soft but still no joy to be able to find it or mount it or access it. I tried all the suggestions help, and eventually just turned it off.

  Also, for some reason, it lists the location as 0 istead of as USB 2 or whatever port when I plug another accessory, this would have something to do with it? I need to rename the disk or something?

  Can anyone help?

  GATS

  Hi the GATS.

  I'm not too knowledgable about MACs, but I think they use a different file for computers structure and that the files can be copied directly to a PC without first being "converted" to make them compatible. I also suspect that your Lacie is formatted to be used with a MAC, and therefore your XP operating system may not identify as a hard drive so does not show in my computer.

  I think you can get some freeware to convert your MAC files, then I suggest Googling to see what you can find.

  Kind regards

• Satellite M100-184: English-how to get the restore CD and user manual

  Hello guys,.

  (1) how can I get an English version of my laptop recovery CD? The one I have is written in Spanish and I am not able to follow the procedures as I didn't undrstand of Spanish language.

  (2) Furthermore, how can I get an English version of the operating manual for my laptop?

  I need you guys to help me more urgent as possible.

  The portable _My details are as follows: _
  Model name: SATELLITE M100 - 184
  Model No.: PSMA00E - 03Y01WSP

  Best regards
  Uche

  Hello

  (1) the recovery CD can be ordered only in the same language as the country where the phone was purchased.

  2) of the user manual are in different languages European Toshiba support page:
  http://EU.computers.Toshiba-Europe.com-> download-> Toshiba operating manual & support

  Good bye

• Upgrades memory battery/Equium L20-264

  Hello

  I want to improve memory my equium l20-264 to the maximum which is about 2G I think and I was wondering what parts of memory I need to do this? He currently heads the 256 MB standard, but I'm not sure if I need to replace that with a higher memory 256 AND get a new one to compensate for the amount or if I can buy a souvenir that will do the job. Is also editing them something that I can do myself or should I consider somewhere for them to do?

  The other thing is the battery life is only 1.5hours and hoped to obtain a superior capacity for her battery? Anyone know if I can do it and so what battery need and how long it lasts?

  Thanks in advance

  GATS

  Hi the GATS.

  Your laptop has two banks of memory (usually accessible by a small flap on the bottom of the unit). He must have a slot in use at present with a 256 MB card installed. New RAM modules are available in sizes of 256 MB, 512 MB and 1 GB so to get all of the 2 GB, you will need to replace the 256 MB card existing with 2 X 1 GB modules.

  The site of Toshiba UK lists all the options that are available for your model (!), but I found the options available on the following web - site: -.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20877&ft=m&St=3

  I don't think it will be possible to install an additional capacity for your laptop battery and 1.5 hours you CITIES seem just to me for this model.

  Kind regards

• Recommended graphics card and processor for Equium L20-264

  Hello

  I was wondering which graphics cards are compatiable with equium l20-264 because I have a radeon eXpress standard ATI 200 m (waste) and wanted to update my graphics card, but I'm a beginner I upgraded my ram but really need an update for my graphics card to a lot of games for vista (you probably think how I have vista on a computer no-vista laptop ^_^)

  I was also wondering if I coould go my Proccesor to a best something like 1.0 GHZ to 2.5 GHZ but a one celeron so I don't have to get a new motherboard.

  Hello

  I would recommend not all graphics cards for this camera because it s is usually not possible to replace or update the chip graphic card on laptops.

  Upgrading the CPU would be possible.
  The CPU of the new generation of motherboards for laptop is not welded and it might be possible to remove it.
  BUT the updates are not recommended because
  -first of all, you will lose the warranty and
  -Second, the laptop could run unstable due to the higher temperature.

  However, I found a few compatible Intel Celeron - M CPU, which are supported by the motherboard:
  Intel Celeron-M 350 (1.30 GHz) FSB: 400 MHz
  360 (1.40 GHz)
  370 (1.50 GHz)
  380 (1.60 GHz)

  Good bye

• Upgrade memory for Equium L20-264

  Hello

  I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

  Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
  -Windows® XP Home Edition
  -60 GB hard drive
  -256 MB DDR2 RAM
  -15 "TFT color display
  -Drive DVD Super Multi (Double Layer)

  Issues related to the:

  1. How can I remove the existing memory? Is there a guide of the user on this operation?

  2 How many slots have?

  3. What is the max memory per slot?

  4. can I buy Toshiba memory directly?

  It is rather urgent and would like a quick answer.

  Thanks in advance
  Rag99

  Hi mate.

  As far as I know your laptop supports two memory locations.
  They must be placed at the bottom of the unit.
  If you n t know how to change this then I recommend consulted the user manual!
  The manual can be downloaded from the Toshiba European page.
  I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

  PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules

• Equium L20-264 - CPU upgrade

  Hello world

  I have Toshiba Equium L20-264 and I want to move into gear
  Can someone help me please?

  I had already upgraded to 2 GB of Ram, but my CPU is still 1.4 GHz.

  Please guide me what to do and if it supports several Ghz processor, which will be the best place to buy.

  Thank you.

  I assume that you have not read all the posts here in the forum about upgrading the CPU s for laptop?
  Did you?

  Some facts first:
  Update CPU is very delicate and depends on the chipset and BIOS support.
  In case one of the parties (chipset or bios) would not support new CPU, the will to power laptop on.

  Second: the laptop seems to be equipped with an Intel Celeron - M CPU, and I suppose the other Intel Celeron-M CPU be compatible:
  Intel Celeron M 370 (1.5 Ghz)
  Intel Celeron M 380 (1.6 Ghz)

  Everything supports the FSB 400 Mhz

  But guess what? Even if you add the new processor at 1.6 Ghz, the performance gain will be not noticeable. So in my eyes, CPU upgrade for this old book is useless. It won't add any performance benefits.

• I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?

  I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?

  The fastest way is to use the option 'Restore the default toolbar set' as shown here - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

• Equium L20-264: unknown device PCI after Bios Update

  Hi all
  I just updated the bios on my Equium L20-264 (PSL2ZE) to V1.80.
  After restarting windows XP has detected a new PCI device but no driver for it.
  Everything seems to work and all of the devices, I expected were there.
  The name of the device is device PCI PCI\VEN_1002 & DEV_437B & SUBSYS_00000000 & REV_01\3 & 0B0C5 13 c & 0 & A2.
  Any ideas?

  Hello

  Select this device and right click and install or update the driver.
  For the source of driver, please choose this path:
  C:\Windows\System32

  Check if the driver has been found.

• How to get the new activation key when some numbers are taken away and you have received?

  How to get the new activation key when some numbers are taken away and you have received?

  Have a laptop with windows 7 from Dell. Need to re install W7. And I have some numbers are taken as a result of its use.
  How can I get a new code activation or my complete activation code?
  Best regards, W7 user

  How to get the new activation key when some numbers are taken away and you have received?

  
  Have a laptop with windows 7 from Dell. Need to re install W7. And I have some numbers are taken as a result of its use.

  How can I get a new code activation or my complete activation code?

  Dell provided you with restore/recovery media and/or a way to restore the machine 'default' as a key sequence?  If so - you won't need the number--unless they just sent a DVD of Windows 7 nu - and they are usually not unless you ask.

  They have probably installed using their key, which means that even with a utility like Belarc Advisor or ProduKey - you will not get the product key that matches the one on the sticker.

  Some may have you take several different digital pictures of the sticker from different angles and see if you can decipher the missing characters like that (you'd be surprised to see how that works).

• How to get the text have the same effect as the video?

  Hello

  For the first time post here, but I wonder how to get the text of the titles have the same effect as the video behind her.

  For my video, I use 'bad tv' and other effects such as Gaussian that obviously changes the appearance of video, creating the look of VHS. However, I then inserted text via the title, but it normally appears. How can I make this text have the same effects as the video behind it?

  A friend told me I might need to add text to the video first, then do the effects, I have not tried, but wonder if there is an easier way, as this would require me to restart.

  EDIT: That's what I'm looking for. https://youtu.be/7_2PHQI89dI?t=24s The text has the same effect as the video.

  Thank you

  One way is to create a clip made up based on the title and the original clip. Then apply the effect.

  Another way is to use an adjustment layer.

  Good luck.

  Russ