Equium L40-14i does not power up if its cold

Similar Questions

• Equium L40-14i does not illuminate!

  When I turn on my laptop the power button turns green and the disk drive can be heard for a few seconds, after that nothing happens. The screen remains black. I don't know how it happened.

  Hello

  Sounds like serious hardware problem.
  You are able to access the BIOS? Usually, you can access the BIOS by pressing F2 at the beginning.
  So if this is not possible, then it means that your card mother s cell phones likely to be affected. But also the defective RAM module might be possible

  In my opinion, the technician of the ASP must check these pieces of hardware.

• Equium L40 - CDDVD does not recognize Audio CD

  Hello

  I recently bought an Equium L40 and that's fine, except that the CDDVD drive does not recognize Audio CD. Just drive whirs and grinds for a few seconds then stops. DVD read correctly. The Audio CD I tried to play properly on other machines. I tried to change the settings for AutoPlay to "Ask Me every time", but it doesn't seem to help. Has anyone seen this problem before?

  Thanks in advance for any help.

  Kind regards

  Chris

  Hello Chris

  Have you tested with different CD (one oldest and newest) original music?
  You see the content of these CDs in Windows Media Player?

  I tried on my P200 with two original music CD and there is no chance of start them from Windows Explorer or see the content there. Start Windows Media player and I hope that it will work.
  Please post the result.

• Equium L40 - internet does not work if I open more than one Web site

  I have an Equium L40-10 X, and while the system works well, he doesn't like the internet. If I open more than one Web site, a little box comes up saying that Internet Explorer has experienced a problem and must be restarted. It becomes excruciatingly embarrassing if I'm in the middle of something important and I lose the site I've been on!

  Especially with me, go to college soon too! Especially it will refuse to work if I have to download something, for example, I recently bought an Apple iPod Nano and I needed iTunes in order for me to put music on it, but once he starts the download, the "internet has stopped working" appears and I have to start everything again, but instead of her work - quite simply, there is no!

  This often becomes a case and it makes me incredibly stressed!
  Help, please.

  Hello

  Always use the OS from windows update?
  These errors occur if the registry is dirty and drunks was not updated!

  Update windows on Microsoft for the last State page!
  In addition, you must clean the registry using the freeware tool called CCleaner. It s nice!

  So finally a hint;
  You can access the internet with Microsoft Internet Explorer and with another internet browser like Firefox for example.

  I recommend you this possibility.

  concerning

• Equium M50-244 does not not to wake up on LAN

  A notebook Equium M50-244 does not meet the magic packet WOL.

  The BIOS settings are correct and show adapter LAN ENABLED, Wake on LAN: ENABLED.

  The sticker on the laptop and the original box gives a different MAC address to know what the device itself (ifconfig or lshw). No matter, the laptop does not account the magic packets for two MAC addresses.

  Using Wireshark, I see that the WOL packets are certainly diffuse with properly formatted MAC addresses.

  My thought is now that it is a BIOS problem but I can't find the right bios for this machine.

  What would be the best bios match? Keep in mind this box is Linux.

  Thanks in advance for any help.

  See you soon

  Nick

  Hello

  Have you checked if the WOL is enabled in the network card settings?
  Do you know how to check this?

  Go to the Device Manager, expand network adapter s and mark LAN card.
  Then, go to the properties of the network adapter and check the Advanced tab.

  There are a lot of different settings and a configuration option must refer to the WOL.

• Equium L40-14i HD Enclosure

  I want to turn my Equium L40 - 14i HD in external HD. Should which kit pregnant I use?

  Hello

  You must use a drive enclosure HARD 2.5 SATA Equium L40 s supported HDD SATA and SATA HDD interface.

  Welcome them

• Re: EQuium A100-147, does not boot, \windows\system32\config\system - lack-

  This laptop Equium A100-147started does not connect to the internet normally, but she in safe mode.

  So, after trying the virus scans-nothing.
  Restoration of the system-nothing. I decided to put in the recovery disc and reinstall windows media.
  I changed the boot sequence to install, boot sequence changed to original.

  He has reinstalled but won't get to the Windows screen, a message came \windows\system32\config\system-manquant or damaged.
  I can't see even a way to do a repair with this recovery disk?

  Any help would be appreciated

  Thank you in advance.

  This error means that the registry is damaged.

  The registry consists of the following files:

  c:\windows\system32\config\system
  c:\windows\system32\config\software
  c:\windows\system32\config\sam
  c:\windows\system32\config\security
  c:\windows\system32\config\default

  You can restore these registry files in the restore folder of the system hidden on the C: drive.

  Here are the instructions:
  http://support.Microsoft.com/kb/307545

• Laptop does not power on battery

  Please can someone help? I use a HP Pavilion TX 2000. Suddenly, I noticed that my powers only laptop when plugged into the power, but once AC power is battery does not power the system.  The battery meter indicates 100% and shows loading icon when I use the laptop on the sector. I called HP support, but they can't help me after talking to their phone for more than an hour. I would really really appreciate if someone can help I did a test hard, reset the BIOS and update I tried also but its still the same problem.

  Thanks so much for anyone who can help. It's very frustrating.

  Hello

  You probably need the help of a real computer (no leeks and peeps store at a Best Buy or any other
  Department stores) or HP support.

  =================================================================

  This troubleshooting tool and other information might help.

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Equium A210-17i does not supply power to the top only with the power adapter plugged

  Equium A210-17i turn on when the battery is missing, but the laptop is set to the power supply dc?

  I have a dead battery and the laptop does not light with or without the battery inserted.
  The food came out 19v as it is supposed to.

  Also no led lights on the laptop when the power is connected and there is no sign of life at all by pressing power buttun.

  Thanks for any response.

  Hello

  The laptop must also lights up if the battery is not inserted.
  If the adapter is ok and if it s connected to the laptop, then the power led should be lit and it should light up.
  This led indicates that AC adapter provides power to the laptop properly.

  But if the LED turns OFF then that would mean that there is no power, and in this case the laptop will not turn on.

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• Equium L20 battery does not load

  I have an Equium L20 what battery does not charge. The Windows Powermanagment says he is in charge, but the percentage increases ever, I tried different batteries with the same symptom as a result.
  Battery LED is orange glowing as if his load but no matter how long I leave it on charge, percentage does not change. Windows detects the battery as well with all the correct information... I tried to remove the battery, to no avail. .
  Is it a software or a hardware problem?

  Published by: ADMIN on June 7, 2008 08:12

  Hello

  I also believe that it is hardware problem. There must be some problem with electronic power electronic board. Particular component? This component is placed on the motherboard, and I don't really know if you can exchange it separately.

• Equium L40-14i - can I get a recovery disk?

  Hey,.

  I'm stuck with that laptop right now because when I did a scan for virus about 4 weeks ago we found 179 virus and endless malware, and since this analysis I can start is no longer a normal Windows Vista 32-bit area unless it is Safe Mode.

  When my mother bought the laptop it is a display model and that they did not provide a recovery disc witht the laptop. I am able to request one or if I am not not to get a disk how am I able to rectify the Please this problem? Also when you try to open a session in normal Windows, it accepts the password then sits there with happiness on the 'Welcome' screen and does not move further.

  Help, please

  Kind regards
  Obviangel

  Your Equium L40 comes with HARD drive recovery option.
  Recovery image is recorded on the second partition, and you should have HDDRecovery folder saved on the second partition.

  Is this folder?

• Equium L20-197 does not light up at all - on button / stop flashes and nothing happens

  Hello

  I own an Equium L20-197 and it currently has a power problem. It does not light up at all. When the device is connected to the machine the orange light comes on to show that there is a power source but when I hit the power button the flash just buttons and nothing happens.

  If I hit him again once all the lights go out and the whole system fails.

  Any ideas on how to solve this problem?

  Thank you
  Alan

  Hello

  Did you put this phone in the standby or hibernation mode?

  Read this description, it seems that the laptop has been in one of these modes and cannot wake up.
  Try to remove the battery from the laptop and unplug the power adapter.
  Several waiting time (~ 20 min) and reconnect the battery and the AC adapter.
  Then try again to put the laptop.

  If she will not be able to boot up the laptop I presume the ESF on the dysfunctions of the motherboard.
  In this case the contact of technicians would be desirable.

• 32RL938 TV does not power up - firmware problem

  Hello

  My 32RL938 TV does power no more. He asked me to do an update and I pressed ok. When he reached 5%, he stopped for 2 hours. I unplugged him and then when I plugged back it it starts but shows nothing. The remote control does not work. I can't do anything. Can someone help me please?

  Maybe you can try to update the firmware once more?
  Give it a try.

  Here you can find and download the firmware and update of all instructions step by step.
  http://www.DL.Toshiba.com/

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7